MSE 7.0.220.0
Can MSE running software 7.0.220.0, work with WCS runing WCS-standard-K9-7.0.240.0 and WLC 5508 runing AIR-CT5500-K9-7-3-112.0 ?
No. The MSE and the WCS has to be an equal or higher version. With WLC 7.3 you need Prime Infrastructure. Here is a compatibility matrix that shows you what codes are compatible.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Refresh rate for client tracking i WCS/MSE
Hi
I have a customer that have trouble with the update of the position of a client. Even if the clients walks across the whole building, the client will stay at the same place for several minutes. Is there any way to tune the refresh rate? When I push the load button in the map, the clients position will refresh, or it did when I was on the site, now they just test with an application.
The setup:
WiSM 7.0.220
WCS 7.0.220
MSE 7.0.220
They use the API for MSE to get the location information to the external application, and that will show the information on a cisco 7925 IP phone.
Do someone know a way to increasing the refresh rate?
- PatrickFrom: Cisco Mobility Services Engine - Context Aware Mobility Solution Deployment Guide
Jitter: Before the 5.2 release, MSE used to have Location Smoothening mechanism to track clients. Moving average was taken for clients, or, in other words, client movement was averaged. Starting with 5.2 software release, this whole
mechanism has been replaced with “Location Filters.” Location Filtering is applied internally on a per client basis. MSE
keeps track of which client moves and which is stationary, and it applies filtering accordingly. This reduces the overall jitter of the system. Location filtering is enabled by default.
Perhaps you want to turn location Filtering OFF for your application. -
just need a straight answer, best if someone has had a similar configuration working, sorry pals I really need to be shure
then look at this...
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
table 1
Table 1 Wireless Software Compatibility Matrix
IOS Release
WLC
NCS
WCS
Navigator
2710 Location Appliance
MSE
12.4(25e)JA
7.2.103.0
1.1.0.58
7.2.103.0
12.4(23c)JA5
7.0.235.0
7.0.230.0
1.6.230.0
7.0.230.0
12.4(23c)JA4
7.0.230.0
7.0.230.0
1.6.230.0
7.0.230.0
12.4(23c)JY
7.1.91.0
7.0.220.0
1.6.220.0
7.0.220.0
this is the reason I asked if someone had tried it...
and... -
MSE 8.0.110.0 not showing any clients
hi all,
i just posted a reply in some other thread stating the same thing but decided to make my own topic.
set-up:
2x5760 running 3.6.0
mse appliance running 8.0.110.0
prime infra in VM running 2.2
ap - 3702I / E
problem:
wireless clients not showing on the prime floor maps.
what have done so far:
wlc synced with mse thru nmsp - check
wlc added to prime - check
mse added to prime - check
mse synced with wlc thru prime - check
all aps positioned on the maps - check
CAS enabled on mse - check
NTP configured to wlc , mse and prime - check
check time all synced
nmsp status in mse - active
nmsp status in wlc :
WLC1#show nmsp status
MSE IP Address Tx Echo Resp Rx Echo Req Tx Data Rx Data
x.x.x.x 618 618 43878 10
WLC1#show nmsp subscription sum
Mobility Services Subscribed
Server IP Services
x.x.x.x RSSI, Info, Statistics, AP Monitor, Attachment, Wired Location
WLC1#show nmsp subscription deta
Mobility Services Subscribed by 10.29.220.9:
Service Subservice
RSSI Mobile Station, Tags, Rogue
Info Mobile Station, Rogue
Statistics Mobile Station, Tags
Attachment Wired Station
Location Subscription
AP Monitor Subscription
troubleshooting done so far:
deleted then added mse on prime then resynced to wlc
reconfigured nmsp on wlc and resynced again with mse
rebooted mse - no avail
rebooted prime - no avail
reboot wlc - not an option coz theres a lot of users =)
tia,
chrisThanks Pete, I have done that, in fact I used a useful utility to update that property on a batch of servers.
Thanks for the thought, any additional ideas?
Cheers
Andrew -
MSI VN220GT MD1G|GeForce 220 GT - causing lock ups/screen freezes
Hi, I've been searching everywhere for my problem, and the things I find usually are left unanswered :(
I recently upgraded my old graphics card (GeForce 7300 GT) to the GeForce 220 GT, at that time I was using Windows XP SP3. Everything went fine then, I downloaded the newest driver from nVidia (195.62) and restarted, everything went smoothly.
It was then my computer started to freeze, to the point where I can't do anything (mouse/keyboard unresponsive). I am forced to force reboot. This freezing usually happens randomly when there's nothing to provoke the problem.
So I decided to upgrade to the new Windows 7. I did everything it told me to and everything went very well. But the problem still occurs, but more often, and around 30 minutes after logging in. I got the Windows 7 32 bit version of the new nVidia driver (195.62) and installed it. Did nothing. I have also tried to update windows which also did nothing.
These forum threads ask the same question I am now asking:
http://forums.nvidia.com/index.php?showtopic=109833
http://vip.asus.com/forum/view.aspx?SLanguage=en-us&id=20091113065624625&board_id=14&model=CG5270&page=2&count=17
I am currently posting this in safe mode, very frustrated too. Help would be greatly appreciated, I have no where else to find answers :SQuote from: ZSDE on 14-January-10, 23:31:55
I did some more research on the net and it seems this PSU is labelled under many different names. I found a Portuguese site that did the test for this unit and then used the google translator tool.
refer to http://www.clubedohardware.com.br/artigos/1818/1
Some translated extracts:
The Coletek is a national brand aimed at the OEM market, or its source is aimed at companies that assemble PCs They have a separate brand for products geared to the retail market, the C3Tech. Today we test the model LC-8460BTX S (which, despite its name, is an ATX and not a BTX) that is sold as a source of 450 W. Really?.....
....Speaking of curiosity, in Figure 7 you can see the marking of the type of fuse in the circuit board of the source. All sources bring this information. But the curious thing here is that the marking indicates that for a source from 150 to 200 W a 5 A fuse should be used and to a source from 230 to 300 W from a 6.3 A fuse should be used. As this power supply uses a fuse of 6.3 A, we have a source between 230 and 300 W, according to their own existing markup on the printed circuit board thereof. As the manufacturer can turn that into 450 W on the label of the source is a magic that Mr. M can not explain.....
....The Coletek LC-S 8460BTX burned when trying to draw about 225 W (which would be our test number seven). So the most you can pull it was about 190 W (which would be our test of 200 W). More information and video on the next page.
So I recommend that you perhaps translate the whole article to get the full results. In your case, I believe the PSU should be the first place where you should try something a bit more realistic before you do anything else.
Quote from: Henry on 15-January-10, 08:09:28
For a system with a 220 installed PSU with +12V~30A minimum is recommended. My recommendation is to get nothing less than a quality PSU such as a Corsair VX450W +12V~33A. That junk PSU is typical of the worthless ones that are often provided by case manufacturers and examples of similar units that can be purchased for as little as $10 (USD) on eBay.
Thank-you so much guys, you've most likely have just diagnosed and gave me a solution for my problem
At first I never knew all PSU's were different, and that my new graphics card could handle whatever I had in my system at the moment.
I don't think I will bother checking my PSU if my current PSU is a Okia or a Xion, I may as well upgrade the thing anyway
Just some things I need cleared up though:
Firstly, is it the Corsair VX450W that I would want to buy and install to run my card? Is it affordable?
And secondly, are PSU's hard to install/upgrade? Where can I find a guide/tutorial for this kind of thing? -
The difference between Telepresence Content Server and MSE 3500
Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.
In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share. -
If I use the Apple world trael adapter kit for Europe, do I need anything that changes 220 volts to 120 volts?
Hey Babis Babinis,
Thanks for the question. Nope! As long as you are using the power adapter that accompanied your MacBook when purchased, you are good to go. Apple’s power adapters support line voltages from 100 to 240 V. In example, see page 3 of the manual for our latest line of MacBooks:
http://manuals.info.apple.com/MANUALS/1000/MA1665/en_US/macbook_pro-retina-late- 2013_ipig.pdf
Additionally, this resource you came from provides some helpful information:
Because the devices listed above have auto-sensing and auto-switching power supplies, all you need to do is attach the correct AC plug adapter to the device to have it work correctly in other supported countries.
About Apple World Travel Adapter Kit
http://support.apple.com/kb/HT4341
Thanks,
Matt M. -
Won't print to my old DesignJet 220 C3187a from XP Pro
I have an original DesignJet 220 C3187a inkjet A1 plotter in as new condition ( I purchased it new ).
I have autocad running on Windows XP pro on a Mac Pro laptop in a virtual environment (parallels) and I cannot get the computer to talk to the plotter at all.
I have purchased a usb to parallel cable to connect to the laptop.
Is there a program to do this????
Do I require a software person to alter a program to talk to it????
Any ideas please I am desperate to plot work out????????Hi OC Photoworx,
Have you tried updating the Printer driver yet?
I see an updated version on the HP site:
Version#: 61.101.368.41
Release date: 16 Mar 2011
See if downloading that driver can help out!
If not, let us know here!
Thanks!
Pete -
How I can send a report directly to the printer "EPSON TMU 220" from form11
Dear,
I have a problem with Oracle Forms11g, I need send a report to the printer EPSON TMU-220 (Pos of sale printer) in the client machine.
Please, help.
Thanks
JCDear,
The problem is:
I need to send the report directly to printer. All other reports work fine with other printers in the network.
But the EPSON TMU-220, (I changed the card connection from COM to USB, and nothing)
Please, help me.
JC -
When I plug in my iPhone 3GS using the Apple plug to charge it, and I am overseas in country with current of 220 volts, do I have to use a transformer to step down the current to 120volts, or can I just use an adapter to allow the plug to fit, and charge it with 220 volt current??
The adaptor voltage range is 90 - 240 so all you will need is an adaptor.
-
Do I need an adapter or a volt converter 220 to 110v for my ipod touch 2nd gen.
I have and ipod touch 20nd gen and an ipod shuffle 4th gen. I live in Colombia where we have 110 v and I am traveling to Argentina where they have 220 v. I've been reading that i may not need a power or voltage converter but just an adapter, because the charger might already be dual (for 110 and 220) or is it the ipod itself. Is this standard for all apple chargers because i have some really old ones (5 years) and a new one.I also have a Belkin power charger for them.
No. The power brick for the iPod senses the voltage and adjusts for the different ones.
You will need an adapter to switch form flat us pins tot the round pins used on their plugs.
Allan -
can I use my I-phone with 220 volt (China) with only a prong adapter, or do I need a votlage converter as well. Unit purchased and used in USA.
The iPhone charger is a world charger, no voltage converter needed. All you might need is a plug adapter, but that's it. Your charger will work fine & no worries about frying your phone as suggested by the orther poster who has no idea what he/she is talking about.
-
I am travelling to Spain and purchased the plug which allows me to plug in my charging cable. Since the voltage there is 220 do I need a voltage converter. The tech at Radio Shack said no because the iphone plug lists the voltage as 100 to 220.
All genuine Apple power packs are multi voltage
100-240v 50/60hz and will work anywhere so no you just need the pin converter -
I have the Apple world travel adapter Kit. Do I need a voltage converter to step down 220 V to 110 V?
As Meg said, no, you don't need a converter. Take a close look at the charger... it says 110-240VAC Input, or something similar.
-
Windows Update and MSE will not update
The Windows Update and MSE on my wife's netbook will not run. I've tried making sure the BITS and WU are running in the Services. BITS is running but Update won't run. When I try to get it to run I get an error 1067. When I try to run update I get the Update
in not running message. When I try to update MSE I get an error 0x80080005.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-FJT32-QMPGB-GCFF6
Windows Product Key Hash: KGSsbuo1+06XJlvCBpYnFCqWv54=
Windows Product ID: 00342-OEM-8992752-30004
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.011
ID: {76BA4188-6989-4312-891C-65EFCE4499D4}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Starter
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{76BA4188-6989-4312-891C-65EFCE4499D4}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.011</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-GCFF6</PKey><PID>00342-OEM-8992752-30004</PID><PIDType>2</PIDType><SID>S-1-5-21-2535747627-2150558150-2755165369</SID><SYSTEM><Manufacturer>Acer</Manufacturer><Model>AOD257</Model></SYSTEM><BIOS><Manufacturer>INSYDE</Manufacturer><Version>V1.14</Version><SMBIOSVersion
major="2" minor="6"/><Date>20110922000000.000000+000</Date></BIOS><HWID>B8970100018400E4</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>ACRSYS</OEMID><OEMTableID>ACRPRDCT</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product
GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>7480B9502DF0D86</Val><Hash>oYWOW5ayFE3pZ+jvTpuXYsY64JE=</Hash><Pid>89388-707-8722531-65301</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/><App
Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Starter edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 8be4a481-9b5c-4588-a5ec-5dad4b1f15da
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00342-00178-927-530004-02-1033-7601.0000-2202011
Installation ID: 017622677721141361630283562192842876556872428761495962
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: GCFF6
License Status: Licensed
Remaining Windows rearm count: 2
Trusted time: 7/3/2014 5:24:05 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: LgAAAAAAAQABAAIAAAABAAAAAwABAAEAnJ+cKQYqGLB8r/QoxPLejAzc4NhcMw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC ACRSYS
ACRPRDCT
FACP ACRSYS
ACRPRDCT
HPET ACRSYS
ACRPRDCT
BOOT ACRSYS
ACRPRDCT
MCFG ACRSYS
ACRPRDCT
WDAT INSYDE
INSYDE
SLIC ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
SSDT ACRSYS
ACRPRDCT
If someone could help me with this asap, the wife is anxious to be able to use her computer againHi,
Regarding Windows Update issue, please have a share with your CBS.log ( Find the log in C:\Windows\Logs\CBS\CBS.log ) and
Windowsupdate.log, and we could find the windowsupdate.log in (%windir%\Windowsupdate.log).
For Windows update troubleshooting, we might first take a look at the following articles:
Troubleshooting update issues for Microsoft Security Essentials
Troubleshoot problems with installing updates
Fix Microsoft Windows Update Issues
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
Hi, We intend to change all our flatfile source system name from BDFLATFIL,BQFLATFIL to just "Flatfile" in dev, Qa and prod.Does anybody see a problem with that? Regards Kalpit
-
Is account lockout policy still best practice
Windows Server 2008 r2 (will be moving to 2012 r2) since implementing account lockout policy two days ago, we've been bombarded by calls to unlock accounts. and after a few minutes, same users get their accounts locked again. my question, since we ar
-
Hi all, up to about 2 weeks ago I had no problems downlaoding epub-files (well, actually acsm.files) from public libraries and reading them in ADE or - after copying them - on my e-book reader (Pocketbook Pro 903). Then there must have been something
-
VBA script to combine all records in a sub-form into a usable string
I am using the Outlook 15.0 Object Library to create emails and appointments. I have a form that contains event information and subform that contains event participants (a related table). Right now I am able to click a button that will take informati
-
Hello Experts, we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4). We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible