MSExchangeTransport critical storage error and recovery

Hi All,
Yesterday, I received the following error on one of my Hub Transport servers and I'm not sure if there is any action I need to take from this point:
"MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:D:\Transport Queue is moved to directory path:D:\Transport Queue\Queue.old, and directory path:E:\Tranport Queue Logs is moved to directory path:E:\Tranport
Queue Logs\Queue.log.old."
At this time, I also received a few alerts that Forefront had timed out while scanning some messages and that resources on the machine were limited.
Did I lose any data when this automated recovery occured? What does the message mean by: "This recovery action will not be repeated until the target folders are renamed or deleted"
What is considered the Target folder? The "old" location or the new location? I am currently running Exchange 2010 SP1 RU2.
Thanks for your thoughts!

Hi
I just find this eventid – 17102 relevant to this.
If the Queue.old directory already exists and a recovery is attempted then the following error is reported in the Windows Application log:
EventID: 17102
Description: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action.
This recovery action will not be repeated until the target folders are renamed or deleted. %2 Where %1 is the database instance name, %2 is a list of the path changes
To resolve this issue simply delete or rename the contents of the Queue.old directory and restart the MSExchangeTransport service. Please finish recovery process. I can’t say whether you lose data.
Please check it by yourself. But I don’t know why you meet this kind of error.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

HP Pavilion dv7-4269wm SMART Error and Recovery

My hard drive recently crashed after receving SMART errors for over 6 months. I am planning on ordering a new hard drive to replace it. Thankfully I was able to backup my computer about 2 weeks ago so I dont think I lost anything important. My question is regarding the recovery discs from HP. Although I am from the US, I am in the Netherlands Antilles at the moment and am having a hard time contacting an HP office to mail me the recovery discs. If I install a new hard drive and install Windows on my computer, is it necessary to have the recovery discs to make sure all the drivers, etc. are working or will my computer still work properly without them?

How are you planning to reinstall operating system?
To confirm the fail, do the hard drive - quick & extensive test from BIOS - System Diagnostics by pressing ESC key or F10 as soon as you power on the laptop.
If that fail & generate 24-character failure ID, is a hardware failure & replacement if the option left.
You can use Recovery media only if you buy & install a new HDD of capacity 750gb or higher.
For clean installation, that's not an issue.
You can download & save all the latest version of the drivers (check the date & version number) setup/.exe files in to USB. Insert USB & DVD simultaneously and there'll be option for loading driver during process of installation, just select the USB from there & it'll automatically install the storage drivers from it.
Later on after Windows installation, additional drivers could be installed from USB manually with a restart of notebook after each installation.
Related:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

5GB free, not enough storage error, and can't manage storage

i having this problem:
my icloud show me that i have 5gb free from 5gb, but when i try to backup my iphone it says that i have not enough storage, even so i backup only my contacts.
i try to enter 'manage storage' but when i press it, it is just loading and doing nothing (stays on the same screen).
i have to back my iphone up, please help me !!

Try to hard reset by pressing two buttons - home and power at the top. Once restarts go to manage storage. If you ready to buy extra storage buy, if not use that article to turn off some of the things, starting with camera roll backup. Understand - that while it will probably have enough capacity after that you really want to backup pictures and videos, take it as band aid not solution.
iCloud: Managing your iCloud storage - Support - Apple

Azure Storage Backup and Restore

Hi,
We have Azure Tables deployed in our Azure Storage Account. Is there a Backup & Recovery strategy we can use for Production Business Continuity plan.
Thanks.
Regards,
Subhash Konduru
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Hi Subhash,
Thanks for posting here.
I suggest you to check this link for BCP on storage backup and recovery.
https://technet.microsoft.com/en-us/library/dn621063.aspx
http://blogs.technet.com/b/uspartner_ts2team/archive/2015/02/17/new-solution-accelerator-azure-business-continuity-and-disaster-recovery.aspx
Hope this helps you.
Girish Prajwal

Workbook -Critical Programe error

Hi Experts,
when we are trying to open a workbook in BI 7 analyzer we are getting the the bellow error message.
"critical Programe error and disconnection from BW Server"
We are at Support pack level 17 and we are using SAP GUI 710 with patch level 8.
Please respond if you have experienced the same.
Thanks
DB

Niyati,
That hotfix can run only to the 640, even we have the same problem over here. Actually you should not upgarde the front end patch if you want to install. But that hot fix might run or may not run, you may get issues later with the GUI..
All these probles will cause becoz of frontend patch... If you are at patch 27 then you need to unistall and come back to the same patch level as your colleague has... actually i dont know how to unistall that patch.. Or else try out with frontend patch 28...
Hope it helps..
Assign points if it helps
Gattu

Rescue and Recovery error

I have a Lenovo 3000 N200 system laptop, type 0769 and Model: BWG which has developed a problem. Initially the laptop could not start and Windows Vista failed to load. I was forced to initiate the Rescue and Recovery mode and tried to restore the system, but now once the laptop has gone through the system restore it freezes. I have had to disconnect and then replace the battery to force it to restart but it keeps going to the Rescue and Recovery window; and nothing happens.
Please could someone help me out on how I can solved this problem; or where I can request for system restore CD

Hi
Remove the harddisk and connected to another computer as an storage with external USB connection. When system find the new hardware, go to MY computer, Rigth click on driver (probably will be D:/ ) then click on properties. Click Tools, see error check and scan for errors, Run for it. Then re connected the harddisk on Lenovo. If this is solves the problem you are lucky.
If it is not. You need recovery disk sets.
You need to do same process one more time but this time, when you click on driver with rigth click, You will need to FORMAT the hardisk. You need to delete all data to RUN new program for LENOVO. I know it hurts, but I try many options, End of it, That was the process I am running again my computer now. Goodluck.
JMC

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Phone stuck in recovery mode complete black screen will not turn on after recovery and update there was an error and now computer and itunes will not recognize the phone....Anyone know what I can do to get the phone recognized again when it cant be turned

Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?

Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone 3gs is stuck in recovery mode. i have tried to restore using itunes but it ends with a message saying there was an error and couldnt be restored

hi desperately need help. my iphone 3gs is stuck in recovery mode... when i try and do the restore via itunes it goes through the motions but when it gets to the end it tells me there was an error and it couldnt be restored... originally it was an ex contract phone that i had opened to orange from vodafone.. it was fine until i tried to do the ios 6 update

There is a way to get it recovered from the so called DFU mode. Try to restart the phone while holding the home and power button at the same time. Then try to connect it to iTunes and do the same again. If you try that again till it works you should be able to use your iPhone as before.

Rescue and Recovery "File is in use and can't be copied" errors - T61 - WXP

Hi and thanks -
When Rescue and recovery backs up, I frequently get the error message, "This file is in use and can't be backed up. Close all programs and try again" [my paraphrase].
Here is everything I have tried:
Restarting Windows and backing up "clean" - I have also attempted doing a "Clean boot" by stopping all services in "msconfig". - still got many of the error messages.
Starting in Safe mode - Rescue and restore doesn't work at all
Starting up in "ThinkVantage" and doing a backup from there - Rescue and restore will restore from a previous copy, but will not back up.
This backup error has gone on ever since I bought this macine used in January 2011, and I have never cared much. But recently the machine had a "fatal error", and all of the backups were useless. I had to comletely restore the machine to factory settings, which means I had to re-load all of my data and programs - an arduous task. I do not want to meet this same fate again.
Can you help me?
Thanks!
Solved!
Go to Solution.

Have you tried running a backup with your virus scanner / internet security software turned off? Sometimes these software can "hang" on files or folders with the intent to protect them and therefore prevent them being read
Before attempting the above please ensure your system has no Internet access
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Error installing rescue and recovery 4.3 on windows 7

i have a sl410 with windows 7 ultimate(32bit) installed, but i failed to install rescue and recovery 4.3 for many times,reporting"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6".
why?
i found someone said about using a command line installation which will NOT install the RnR partition,but how to use command line installation?i've got only the tvtvrnr43_1027sc.exe downloaded file and the tvtrnr43_1027.exe in C:\SWTOOLS\apps\rnr43sc\ directory,how can i input the comands like setup.exe /a /s?which command should i use?

http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-for-Windows-7-installat...

Rescue and recovery Error in Windows 7

Installation of Rescue and Recovery could not be completed due to error 25014 in Windows 7 please any one helpme to overcome this and do a sucessful installation.Advance thanks G.Abarjeethan

Are you sure it was 25014. I got 25011.

Error runtime. rescue and recovery. wizrr.exe

hi all hope you can help me. I'm trying to restore a system with Rescue and Recovery but to get 5% gives me an error "Runtime error c: \ Program Files (x86) \ Lenovo \ Rescue and Recovery \ wizrr.exe"
Tell me know how to fix it. Thank you.

To recap:
(1) the machine seems to be fellow student on your team with a W520
(2) said machine will boot to windows OK (ie, the restore failure did not mess C drive up, it boots)
(3) user add new printer /drivers to machine, which dont work and wants to go back to earlier backup of system
(4) RNR version is 4.5.2 and backups are to USB
==
Technical:
RNR standalone does the restore. This software is found:
A. windows RNR. order the restore. It will switch to standalone RNR partition (on his W520). The order is placed on windows RNR, after selecting restore point. <<< this will be automatic, after order placed. It will reboot to the PDA, progress 5% screen.
B. Fellow user booted to the standalone RNR at boot time (PF11, thinkvantage blue button) AND had to go thru panels to order up the restore.
C. User had the USB plugged in. The BIOS boot sequence has USB first,and it booted standalone RNR software from the USB,then user had to go thru select panels.
D.Standalone RNR CD boot. This would require RNR, windows, create RESCUE media, and CD first in the boot sequence.
==
Regardless of a, b, c,d. Have user use ? of standlaone program to see the verison of the standalone software. The standalone version will be slightly different then the windows platform version (like .0 vs .1 in version number).
==
I suspect user booted from the USB which had an old standalone RNR version. version mismatch.
1) Remove USB in BIOS from the start up boot sequence
2)Order restore via windows platform, it will switch to PDA on HDD -or- boot to pda(pf11) and order restore via panels.
3)I also suspect when user upgraded to 4.5.2, the USB was NOT connected, thus the RNR standalone boot software on USB is older release. BUT the backups are 4.5.2 This not a issue NOW. Later....... Just RNR , create rescue media,point to the USB. Make sure the DO NOT DESTROY flag is set (default). This will upgrade the USB standlone RNR to 4.5. 2.
===
Post back if this matches the scenario.

I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings. Is there anything I can do?

I tried updating to the IOS6, there was an error, and now my phone is in recovery mode and i need to restore to factory settings. Is there anything I can do?

You have to restore your iPhone. Same thing happened to me and many others. Sorry man.

MSExchangeTransport critical storage error and recovery

Similar Messages

Maybe you are looking for