Msft ent desktop 7000 works with Macbook Pro 10.5.8 but not mini 10.6.1

I just purchased a Mac Mini with 10.6.1. I'm using it as an entertainment system hooked up to my 60 inch plasma. I bought a Microsoft Bluetooth Entertainment Desktop 7000 keyboard and mouse. i like the keyboard and it all works except for the integrated trackpad. At first i thought it was because it wasn't fully Mac compatible but when I tried it on my Macbook Pro 10.5.8 the trackpad worked fine.
Any suggestions??

Hi,
This is a guess: The MacBook Pro has a built-in trackpad, while the Mac Mini doesn't. Maybe it's missing a driver. When you have it connected to your MacBook Pro, try to look at your "Trackpad" system preference. Does that exist on your Mini? Also, try comparing the System Profiler outputs, especially concerning your USB.
It makes it a little more challenging when your systems aren't both the same OS level :-D, so some things will be different between the two systems just due to the OS levels.
David

Similar Messages

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

    I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

    Thanks so much for your help, Michael. Glad to hear it works for you.  This gives me enough confidence to go ahead and order the App.  Thanks again. 

  • MacBook Air Superdrive?? Does it work with MacBook Pro

    Hello,
    I need an external Superdrive. Does the MacBook Air Superdrive work with MacBook Pro??

    No, it does not (at least, not without opening the drive and modifying the internal components).
    External optical drives from Sony and LaCie work well with the MBP. Here's ONE EXAMPLE, here's ANOTHER EXAMPLE, both from Amazon.

  • Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

    Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
    Thanks!

    It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

  • Does a dell c2660dn printer work with macbook pro?

    does a dell c2660dn printer work with macbook pro?

    According to their site, they offer no drivers for Mac, or mention anything about Apple.
    I would say no.

  • Does 'Network Connect' work with MacBook Pro?

    My safari unexpectedly quits when attempting to log into my company's VPN.
    - I log into our VPN website and the connection begins to initialize
    - with my MacBook, Safari (2.0.3) unexpectedly quits
    - with my PowerBook, 'Network Connect' automatically starts and the VPN connection completes without any problem
    Does 'Network Connect' work with MacBook Pro? Any ideas?

    Resolved. MacBook Pro was having trouble dowloading the 'Network Connect' application when I logged into my VPN client for the first time. I copied it from my PowerBook G4 over to the appropriate folder and it now works perfectly.

  • Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??

    Ahmed
    Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
    Pattie

  • I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

    I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

    Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot).  It also does not show up in the ;ist of pritnters, scanner when I open Image Capture.  I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below:  Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

  • PC Used to work with XP and airport Extreme Basestation but not with Vista

    Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

    With regard to your printer problem - take a look at this discussion:
    http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

  • HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

    Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
    I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
    Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
    Thanks, John Lee

    Looking at the Konica web site for the PagePro 1300W, I saw the following note.
    Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
    So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • Does a Dell monitor that is compatible with PC work with MacBook Pro?

    Looking for a reasonably priced (under $200) external monitor to use with MacBook Pro. Any suggestions?

    Hello bkford
    I use an HP monitor with mine, Just by an adapter, I bought a VGA to mini display, and it worked fine!
    Good luck
    Dustin

  • Thunderbolt Display works with MacBook Pro but not iMac. Huh?

    I have a Thunderbolt Display, which I normally keep connected as an "extended desktop" to my MacBook Pro -- no problem.
    Starting today, I'm using a borrowed iMac and I had hoped to switch my Thunderbolt Display over and do the same arrangement: "extended desktop." However, the display does not come on when I power up the iMac, and clicking the "detect displays" button in the Displays Preferences window does not help.
    This iMac was previously set up with an a different Thunderbolt Display in its original home, and seemed to work fine. I saw it with my own eyes. My own Thunderbolt Display still works fine when connected to my MacBookPro. It's only the combination of my monitor to the borrowed iMac that doesn't work.
    Both the MacBook Pro and the iMac are running OS X Version 10.7.3. The MacBook has an AMD Radeon HD 6770M card, and the iMac is using an ATI Radeon HD 5750.
    Ideas?

    Both the mini-displayport plugs and TB plugs are physically compatible which is why you can plug it in.   But if the iMac has a mini-displayport for video it won't work with the TB display.
    Check your System Profile to see if it tells you whether you have a TB port.  And if there is no information about that post here or look up for yourself the kind of ports for that model of iMac.  System Profiler will give yo that information (click Hardware on the left).  From the model information it can be definitively determined whether that imac supports TB.
    Also, so long as the Displays system preferences is not showing an Arrangement tab then it is not detecting the second display.

Maybe you are looking for

  • My web page centers in the design view, but not when viewed on line.

    I am new to web design and of course, to this forum.  I had some background in VBA and Fortran, so when the original designer left, I was the only one in the organization willing to tackle the website and try to teach myself how to make it work and k

  • If my peak "physical memory" usage is around 50%, is adding more RAM a waste of money?

    I have a W700-DS with the T9600 dual-core and an SSD, and when running 4GB of RAM I'd notice that memory usage tended to rarely exceed 50%. Just for the heck of it, I just upgraded to 8GB of RAM, and now I'm curious as to whether I wasted my money, a

  • Old iMac won't migrate to new iMac

    Have a iMac running Mavericks and i have tried to use migration to transfer files to new iMac running Yosemite the New iMac sees the old iMac and assigns a code number but the old iMac can't find the new iMac. What could be causing this.

  • My MacBook Pro corrupts USB hard discs

    Hi, this is my first time so cut me some slack please :-) My computer details are : Hardware Information:          MacBook Pro (17-inch, Early 2011)          MacBook Pro - model: MacBookPro8,3          1 2.2 GHz Intel Core i7 CPU: 4 cores          16

  • Touch Pad intermittent, HP G56 Notebook PC, Windows 7

    Hi,  once in a while the touch pad locks/freezes. More often than not this is whilst using the notebook from battery power, rather than mains power. If I close the screen, and reopen, it's all OK.  Any ideas? Thanks Rick