Msg 2114 error when i try to text this one person with my iPhone 4S???
I seem to have an issue when i try to text this one person.....
They do NOT recieve my texts.....but i can recieve theirs.
I get a message after i send them a text from 923-0 that says i used the invalid number of digits.....MSG 2114
Tried deleting the contact , resending just using the number hand typed in...and still does not work!
HELP!!!
Finally Worked! Remove all instances of the contact name and number used in previous messages, phone calls, recents, etc. Shut down sms, mms, imessage, etc in settings. Restart phone. Go back to settings and restart sms, mms, imessage. Send a text without creating the contact first, just enter the 10 digit cell number and send text. Worked for my iphone 4s texting to 1 person's android I couldn't send before. That 1 person was a previous contact that had only 7 digits entered for the phone number. Now I added that contact back to the list and sending text still works. Contact phone number now shows up as +1 (xxx) xxx-xxxx . Thanks wjosten.
Similar Messages
-
I've had an iPhone 4 for a little over a year now, and never had any issues with iMessage, but my friend just got an iPhone 5C. Of course, I still text her, but my texts always go out as SMS's. I can still recieve her texts, though, as iMessages. This only happens with her contact. There has been one time that my text sent as an iMessage, but I hadn't moved to a different location or anything.
I tried switching her number to iPhone instead of just Mobile in her contact, but there wasn't an option for iPhone. Today I created a new contact for her, and managed to enter her number as an iPhone. Even after that, it wouldn't work. I tried going somewhere I'd have WiFi, in case it had something to do with my carrier. She can text other people with iMessage, too.
Any ideas??? I'd really appreciate itHello there, frogs13.
The following Knowledge Base article has some great information for troubleshooting your issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Specifically:
If you are still unable to send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Verify that the contact you are attempting to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Whenever I text this one person, his messages come up green. He has an iPhone and so do I, I can't figure out why our messages are green
We've tried reactivating iMessage, deleting threads, and contacts but nothing seems to work. Has this happened to anyone else?Restart both devices (press the HOME and power button until the Apple logo appears then releasae). If both devices have iMessage turned on and to send as SMS when iMessage is not available, the the green messages are indicative of iMessage not being available on one or both devices.
-
When I try to get onto YouTube, the site is completely white with the words "Authorization Error" in the top left corner. For a while, all I had to do was reload YouTube and it was fine. Now it just won't work at all. I have Internet Explorer on my computer as well and YouTube works fine on there. When this error occurs, the icon in the address bar changes back to YouTube's old icon.
I have tried:
-Updating Firefox
-Restarting the computer
-Closing and re-opening Firefox
-Typing https instead of http before the address
-Googling and clicking Google's link to the site (yes, a feeble attempt, I know)
Does anyone know what I can do to get YouTube back on my favorite browser? I'd like to stop having to run to Internet Explorer to use this site.
Thanks!Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Runtime error when i try to execute this program
I get a runtime error when i run this file using appletviewer. Please help me in getting out of this problem.
The runtime errror is:
C:\prashanth>appletviewer HelloMedia.java
java.lang.NoClassDefFoundError: javax/media/ControllerListener
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:11
1)
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:142)
at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:373)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:579)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:515)
at sun.applet.AppletPanel.run(AppletPanel.java:293)
at java.lang.Thread.run(Thread.java:484)
The code is :
<applet code=HelloMedia.class width=500 height=400>
<param name=FILE value="globe.avi">
</applet>
import java.applet.*;
import java.awt.*;
import java.net.*;
import javax.media.*;
public class HelloMedia extends Applet implements ControllerListener
Player player;
public void init()
setLayout(new BorderLayout());
String mediaFile = getParameter("FILE");
try
URL mediaURL = new URL(getDocumentBase(), mediaFile);
player = Manager.createPlayer(mediaURL);
catch(Exception e)
System.err.println("Exception : " + e);
player.addControllerListener(this);
public synchronized void controllerUpdate(ControllerEvent event)
if(event instanceof RealizeCompleteEvent)
Component compVisual = player.getVisualComponent();
Component compControl = player.getControlPanelComponent();
if(compVisual != null)
add("Center", compVisual);
if(compControl != null)
add("South", compControl);
validate();
public void start()
player.start();
public void stop()
player.stop();
player.deallocate();
public void destroy()
player.close();My classpath has the following value
.;.;.;C:\PROGRA~1\JMF21~1.1\lib\sound.jar;C:\PROGRA~1\JMF21~1.1\lib\jmf.jar;C:\Program Files\CosmoSoftware\CosmoPlayer\npcosmop211.zip;%systemroot%\java\classes;.;
Please help me out.
Prashanth -
Getting an error when I try to set up a Comcast email on Iphone
Hello
I'm trying to set up my comcast email on my iphone. I had called Comcast and got the appropriate incoming and outgoing mail server information to enter and chose to set it up as a POP bc that is what they told me it has to be and when I hit save and it verifies I keep getting this error: the POP server "mail.hmc1.comcast.net" is not responding. Check your network connection and that you entered the correct information in the "Incoming mail server" field.
Does anyone have a solution to this?
ThanksUse mail.comcast.net
Otherwise just do a simple google search for the settings -
I am referring to the "My Templates" folder where I have designed my own specific templates. It loaded fine for iPad Air but confusingly, once it is on iCloud it does not seem to be accessible by my iPhone. So I tried the same process which entails finding the com.apple.numbers file and emailing the files; selecting them on iPhone then telling them to be opened by Numbers. Numbers will ask if you want them to be added to Templates. I said yes and after a brief attempt it returns the message that it cannot load the templates, an error occurred, but there is no reference as to what that error might be nor how to fix it.
To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates -
Medium write error when i try to burn an audio cd with itunes
I have been surfing through a lot of forums and some people found it useful to choose a slower burn speed, some cleaned their disc drives and were helped for a few days but this problem keeps recurring. I have tried the opensource software "BURN" with no problems. I think the main problem is itunes and their low level software that communicates with the hardware. This is really an inconvenience. safari has major problems loading webpage unless opendns is used. I dont know what going on. I agree that apple probably makes the best softwares compared to microsoft in terms of speed and performance but they often get the basics wrong. Im switching back to a slower pc, atleast it will browse the net, play flv's properly and burn my f###ng discs. Ohh another greatest achievement by apple: The iphone 4.
Message was edited by: Volatile420
Message was edited by: Volatile420What type of disk and manufadturer is it? What speed are you writing at?
OT -
When I try to add a related person to my iphone 5 I do not get all of the choices.
I am trying to add related people to my contacts and only get three choices:
manager
spouse
assistant
What is causing this problem as I want to be able to add all of the related categories such as:
friend, brother, custom etc.
PLEASE HELP!!!Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have iphone 5 and can not send a text to one person who has iphone 4s and on same family plan
I have an iphone 5... and also a family plan. I can not send a text to my daughter on the same plan. She has an iphone 4s. I have tried mulitiple things to get this to work.... It started about 10 days ago... I have delete text stream for her and any group messages. Also her contact in contacts. Also readded her contact with area code....then with 1 ...then just with 1... All rebooting in between each new thing i did... Checked to see if sms is turned on ..yes and turned it off... turned of imessages and back on... rebooting in between. Also signed out of and back into apple id. Also with reboots... did a soft reset. Upgraded to ios 8 about 2 days ago... And a few times in last 10 days i could send for a few hours then it was gone again...... VERY frustrated at this point....Also i can text many others including iphones and so can she....
Lee-AnnThank you for reaching out to us, labrylao4. Regarding the issues with messaging, is this affecting only SMS, iMessages, or both? When you or her try to send each other messages, do you receive any error messages while it is sending? If it is for iMessages, have you tried to send while connected to WiFi?
NicandroN_VZW
Follow us on twitter @VZWSupport -
Error when I try to access my yahoo mailbox
I am using JavaMail for accesing my yahoo mailbox.
I get the following error when I try to access my mailbox
Exception :: javax.mail.AuthenticationFailedException: Error logging in.
Session session = Session.getInstance(properties,new Authenticator()
public PasswordAuthentication getPasswordAuthentication()
String username = getUser();
String password = getPassword();
return new PasswordAuthentication(username,password);
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
please any one help me.
i thinked error problem in
Store store = session.getStore("pop3");
store.connect(getPopHost(),user,password);
any of this lines.
please tell ur sugestions.
thanks in advance.try it.
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "myserver.smtphost.com";
private static final String SMTP_AUTH_USER = "myusername";
private static final String SMTP_AUTH_PWD = "mypwd";
private static final String emailMsgTxt = "a message.";
private static final String emailSubjectTxt = "a subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]", "[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = false;
//Set the host smtp address
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password); -
Helpme I have error when I try connect from struts to web service
helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha -
"Unauthorized Host" error when you try to connect to the admin server
"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P>"Unauthorized Host" error when you try to connect to the admin server
<p>
If you see this error message when you try to connect to a Netscape
administration server:<P>
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------<P>
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.<P>
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:<P>
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.<P>
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.<P>
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).<P>
</OL><P>
For Commerce Server or Communications Server (1.x) on Windows NT:<P>
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".<P>
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".<P>
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.<P>
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.<P>
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.<P>
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.<P>
Once you have access to your administration server, you can try again to
set up the access controls you want.<P>
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.<P>
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.<P>
</UL><P>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.<P> -
Error when i try to paste to textinput when the clipboard is null
Hi,
I get below error when I try to paste to a textinput when the clipboard doesn't have any value,
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at spark.components::RichEditableText/handlePasteOperation()[E:\dev\4.0.0\frameworks\projects\spark\src\spark\components\RichEditableText.as:3611]
at spark.components::RichEditableText/textContainerManager_flowOperationEndHandler()[E:\dev\4.0.0\frameworks\projects\spark\src\spark\components\RichEditableText.as:4253]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flashx.textLayout.container::TextContainerManager/dispatchEvent()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\container\TextContainerManager.as:1470]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flashx.textLayout.elements::TextFlow/dispatchEvent()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\elements\TextFlow.as:773]
at flashx.textLayout.edit::EditManager/doInternal()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\edit\EditManager.as:612]
at flashx.textLayout.edit::EditManager/doOperation()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\edit\EditManager.as:462]
at flashx.textLayout.edit::EditManager/pasteTextScrap()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\edit\EditManager.as:1376]
at flashx.textLayout.edit::EditManager/editHandler()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\edit\EditManager.as:213]
at flashx.textLayout.container::ContainerController/editHandler()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\container\ContainerController.as:2374]
at flashx.textLayout.container::TextContainerManager/editHandler()[C:\Vellum\branches\v1\1.0\dev\output\openSource\textLayout\src\flashx\textLayout\container\TextContainerManager.as:1746]
Is there any solution for this?
Amila DomingoUse FlexLib PromptingTextInput. It doesnt have that problem.
http://flexlib.googlecode.com/svn/trunk/docs/flexlib/controls/PromptingTextInput.html
This will work how you want it to.
See http://code.google.com/p/flexlib/wiki/ComponentList
PromptingTextInput
The PromptingTextInput component is a small enhancement to standard TextInput. It adds the ability to specify a prompt value that displays when the text is empty, similar to how the prompt property of the ComboBox behaves when there is no selected value.
Documentation | Example | Contributor: Darron Schall -
Why does my imovie say error when I try to update it?
I just bought a macbook pro, and I clicked update on the apps. The imovie app says error when I try to update it. What do I need to do to fix this?
Please post the complete, verbatim text of any error messages you saw, and specify where you saw them: in an application window, a CrashReporter window, a log, or whatever.
Maybe you are looking for
-
Sys=WinXP SP3, ASUS MB, Athelon X2 6000 CPU, 4 (3) gb mem. Intac Systems mouse trak track ball. This device works fine with all the other programs on my computer. In T-bird or Firefox the left mouse button often doesn't work for minutes at a time the
-
Create/extend materials for new plant with new profit centers
Hi. We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17? Regards, Kjettern
-
Changes to track info in iTunes sometimes doesn't "stick"
I have been slowly ripping my large CD collection into iTunes 10.7. Most of it is classical. This means that a great deal of clean-up has to be done, due to the sad state of the Gracenote database, which is riddled with inconsistencies and spelling e
-
Need help: Unable Flatten pages because of Security setting
this is my code in myFunctions.js var myFunctions = app.trustedFunction(function() app.beginPriv() ; this.flattenPages() ; app.endPriv() ; and this code in vb app.myFunctions() but I am getting exception as Security settings a
-
How to install Elements 10 into a computer without a disc drive
Have the software on disc, but no disc drive. Can it be loaded into another computer and file-shared? Or is there another method?