Msg 2114, Msg 2114

i try to text a phone number and my texts wont go through, keeps giving saying:
Message sent using invalid number of digits. Pleae resend using 10 digit number or valid short code. Msg 2114
im using 10 digits

contact your wireless provider. texting is their service.

Similar Messages

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114

Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
How can this be fixed? Most of my numbers are saved as 7 digit

So I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
I really hope this solves your problem!

TS2755 Msg 2114

Can't send messages for some contacts. I receive this message:
"message sent using invlid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
I check the numbers, edit, fix . delete the contacts and make new again but the promlem continue

Are you with Sprint? If you google msg 2114 you will see that other have had this issue

Msg 2114 error when i try to text this one person with my iPhone 4S???

I seem to have an issue when i try to text this one person.....
They do NOT recieve my texts.....but i can recieve theirs.
I get a message after i send them a text from 923-0 that says i used the invalid number of digits.....MSG 2114
Tried deleting the contact , resending just using the number hand typed in...and still does not work!
HELP!!!

Finally Worked! Remove all instances of the contact name and number used in previous messages, phone calls, recents, etc. Shut down sms, mms, imessage, etc in settings. Restart phone. Go back to settings and restart sms, mms, imessage. Send a text without creating the contact first, just enter the 10 digit cell number and send text. Worked for my iphone 4s texting to 1 person's android I couldn't send before. That 1 person was a previous contact that had only 7 digits entered for the phone number. Now I added that contact back to the list and sending text still works. Contact phone number now shows up as +1 (xxx) xxx-xxxx . Thanks wjosten.

Photoshop CS2 (program error msg)... Help please!!

I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanks

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?

Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

ITune wont start geting a error, error msg says send error or dont send.

Hi,
Like the topic says, i have tryed to reinstal itunes but with same results.
error msg
AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 00000000
what shuld i do next need it to work so i can use my ipod.

let's first check to see whether or not that is associated with a broken QuickTime. (itunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

How can I display my Mail lists and msgs. as usual??

I just lost the capability to show my inbox list or to click on a title to view the email content. When i open Mail there's the body of one msg the right, which I can't do anything with (the usual toolbar is missing); and when click on Inbox, Read Messages, or any icon to the left I just get the panel "No Message Selected". I finally found I could get the Inbox list by going to "Enter Full Screen", which lists the 685 emails in my Inbox, including 10 new ones. But I can't do anything with that list--when I open one it's in a panel not allowing me to reply, forward, etc. I can't scroll anywhere to see other items--if I close the full screen mode I'm back to a nonfunctioning left panel and one email with the body of an email randomly selected; again, if I select Inbox I get the panel 'No Message Selected". That's no surprise since I'm unable to show the Inbox list from which to select a msg. (except on that separate Ful Panel which shows only the list.)
This happened immediately after I installed the latest Java upgrade as advised by a popup. Could that have had ankything to do with this?
Will be very grateful for any help.

OS X Mavericks installed?
Backup and Reinstall OS X.
Reinstall Mavericks
http://support.apple.com/kb/PH13871

Error msg . while creating a GR w.r.t. PO --"ENTER A VALID TRADING PARTNER"

Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA     Ordering Address
VN     Vendor
PI     Invoice presented by
Any thread would be helpful .
regards,
chait

Hi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT2693 what can i do when vendor contact support page can't send my info/msg due to page error and i have paid for an app that no longer works after purchase

What can i do when i purchase an app then after purchase the app fails to work. I deleted the app rebooted ipa then reinstated app. It still fails to work. I went to vendor support but when i go to send the info to them it comes up with unable to send msg due to page error. I am not happy. My child loved the app now it wont even open. Any help???

Try talking to iTunes support
http://www.apple.com/support/itunes/contact/

Tried to update my iPad OS from iTunes. Frozen and got an "unknown error msg". I tried to restore the iPad to factory settings..got the same

I bought today a new iPad from Rideau Store. The setup guys didn't update to latest software version. I tried to do myself trough iTunes, which notify me that an upgrade is available. After a while the upgrading process froze with a msg "unknown error ..". I clicked on the More info button and I got a page saying "due to a scheduled upgrade of Apple's support system some feature are not available.
The bottom line is that now the iTunes does detect the iPad being in recovering mode and asks to restore it to fabrics defaults. I tried to do this and again I got aqn "unknown error"
Finally I run the iTunes diagnostics to check the connectivity between my iPad and my HP laptop (iTunes). For unknown reson the iTunes does not detect my iPad. See below the diagnostics log:
Itunes Diagnostics
MicrosoftWindows XP Professional Service Pack 3 (Build 2600)
Hewlett-PackardPavilion dv5000 (EP416UA#ABA)
iTunes10.2.2.12
QuickTime 7.6.9
FairPlay1.11.17
AppleApplication Support 1.5.1
iPod UpdaterLibrary 10.0d2
CD Driver2.2.0.1
CD Driver DLL2.1.1.1
Apple MobileDevice 3.4.0.25
Apple MobileDevice Driver 1.55.0.0
Bonjour 2.0.5.0(214.3)
Gracenote SDK1.8.2.457
GracenoteMusicID 1.8.2.89
GracenoteSubmit 1.8.2.123
Gracenote DSP1.8.2.34
iTunes SerialNumber 0012AD0812DA2D38
Current user isan administrator.
The currentlocal date and time is 2011-04-20 20:32:27.
iTunes is notrunning in safe mode.
WebKitaccelerated compositing is enabled.
HDCP is notsupported.
Core Media issupported.
Video DisplayInformation
ATI MOBILITYRADEON Xpress 200 Series
**** ExternalPlug-ins Information ****
No externalplug-ins installed.
Genius ID:cb0eaa5cad8a753f64335065bc061263
**** DeviceConnectivity Tests ****
iPodService10.2.2.12 is currently running.
iTunesHelper10.2.2.12 is currently running.
Apple MobileDevice service 3.3.0.0 is currently running.
UniversalSerial Bus Controllers:
StandardEnhanced PCI to USB Host Controller. Device is working properly.
StandardOpenHCD USB Host Controller. Device isworking properly.
StandardOpenHCD USB Host Controller. Device isworking properly.
No FireWire(IEEE 1394) Host Controller found.
Most RecentDevices Not Currently Connected:
iPad runningfirmware version 4.3.1
Serial Number:        DLXFK2A8DKPH
**** DeviceSync Tests ****
No iPod, iPhone, or iPad found.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said?

Error msg 13019 please help

hi
i need help in getting rid of this error msg 13019. it started after downloaded a couple of songs. and it will not allow me to sync my nano ipod thanks

Ive fixed this issue before. The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.
p.s.s. To add your playlists back to iTunes:
-Click file at the top of the screen
--move your mouse over library, selecte import playlist
--on the new screen that pops up, navigate to your desktop
--open the playlist folder, select the first playlist, hit ok
--repeat for each playlist exported

Error msg saying unknown error PLEASE HELP

Hi my iphone 4 died over night so i woke up this morning and put it on charge through a wall charger a few hours passed and i have got back and the little white bars are still circling so i pluged it into the computer and its still doing the same thing and a msg comes up saying itunes could not detect device unknown error OxE8000065. Please help i have very inportant phone calls this morning

thank you so so so so much that worked

Msg 2114, Msg 2114

Similar Messages

Maybe you are looking for