MSG.EXE Error 1722 getting session names?

I have a vista and whenever I send msg to someone else on my "workgroup" it says "Error 1722 Getting session names. I tried msg /?. It sends a message to myself though... ("msg /server:COMPUTERNAME USERNAME "MESSAGE")

Hi,
Please try the following steps:
Before modify the registry keys, please take a backup of the key. For more information about how to back up and restore the registry, please click the
following link to view the article:
Back up the registry
Please add the following registry entry with logon script:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server
Name : AllowRemoteRPC
Type : REG_DWORD
Value : 1
References:
Net Send in Windows Vista
How to configure RPC dynamic port allocation to work with firewalls
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread.

Similar Messages

  • Msg.exe Error 5 Getting Session Names

    Ok after 2 days of research and messing with policys i still have yet to resolve this issue. Due to vista not having netsend anymore I tried using the msg.exe command. So far I have got it to work just on my local computer. But sending it to other vista computers It gives me an error:
    Error 5 getting session names
    I am computer Atlantis
    Destination: computer designated as "Challenger"
    Both running Vista Business SP1
    msg /server:atlantis admin "Test Message"
    (local to local pc works)
    msg /server:challenger admin "Test Message"
    ---> Response: "Error 5 Getting Session Names"
    We are in the same work group, we are not part of a domain
    Any help would be appreciated. From reading it seems to be a policy edit that needs to be changed, but I do not know what to change, so any detailed instructions would be greatly appreciated...
    Alternative i tried: Also i downloaded netsend by czero.com and I can only send the message to XP computers. I cannot send a message to even myself. 

    Hello,
    Based on some discussions about this topic, some community members provide the following tool as the replacement of net send that is not included in Windows Vista:
    http://www.cezeo.com/products/netsend/
    It’s said to support Windows Vista. Please give it a try. 
    Important Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
    Regards,
    Lionel

  • HP ePrint from excel add-in: Error while getting driver name for printer

    Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share,  then print it from there. This happens with excel and word. I have Office Suite 2007.

    Hello modameister,
    Sorry you are having issues with this printer and the ePrint add-on.  There are a couple of questions I would like you to answer please.
    1.  What operating system are you using? (XP,VISTA,7,MAC OS X)
    2.  What and how much data are you trying to print?
    3.  Have you tried to copy and paste the data into a different application or tried using the snip it tool?
    4.  Are you receiving any .dll errors (mscms.dll)
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Why I get "Error in getting session data" error when running report?

    Hello,
    I have reporting services on one server, and SharePoint 2010 on other server. When I view report from browser, I got blank page. From Report Server Log file, I got below error:
    v VERBOSE: writting session cookie: ekkrjbubp00t5wzc3rzspvzb
    v VERBOSE: Saved report snapshot to session in a background thread <for same session id>
    e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database.  This may be due to a connection failure, timeout or low disk condition within the database.;
    e ERROR: Error in getting session data: Expired Session: ekkrjbubp00t5wzc3rzspvzb
    e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: , Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: The report execution ekkrjbubp00t5wzc3rzspvzb has expired or cannot be found
    Are there anyone getting the same issue as mine? I did not see any solutions for this issue when I searched.
    Thanks,
    Megan

    There are a number of timeouts in SSRS; session timeout, report execution timeouts, http request timeouts.  A session timeout in SSRS is not the same as a session timeout in ASP.NET.  Below are some articles that can help you understand the timeouts
    and hopefully lead you down the path of discovery.
    This articles is a good article as it discusses the session timeout and the keep alive that is sent from the report viewer.
    http://blogs.msdn.com/b/jgalla/archive/2006/10/11/session-timeout-during-execution.aspx
    This article is good as well in describing some of the timeouts.
    http://blogs.msdn.com/b/dynamicsaxbi/archive/2013/02/14/how-to-addressing-ssrs-session-timeouts.aspx

  • ERROR: Error in getting session data: Invalid or Expired Session

    Hi,
    We are using ssrs 2008 r2 and have a report which has links that allow the user to drill down.
    When the link is clicked the same report is run but shows more detail. This works fine but we are now getting the error below for a user. 
    I have increased the time out for the report to 600 seconds.
    Error in getting session data: Invalid or Expired Session: fnxgxhjuveugvd552qfyv3fw
    session!ReportServer_0-6!4b0!03/18/2015-10:51:29:: i INFO: LoadSnapshot: Item with session: fnxgxhjuveugvd552qfyv3fw, reportPath: , userName: doman/user not found in the database
    Any ideas how this can be resolved?

    Hi Nasa1999,
    Based on your error message, If the all the users will sometimes got the same issue, it can be caused by the timeout issue. It happens a lot when rendering big report, and it exceeds the default Session Timeout. You can execute script
    to increase the Session Timeout time. Please refer to following blog:
    Session Timeout during execution. Also increase the value of <Query Timeout> in rsreportserver.config file. This file locate at XX:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer
    Please also check to set the <legacyImpersonationPolicy> back to true(https://support.microsoft.com/en-us/kb/972328).
    Locate the Aspnet.config file in the following folder:
     %windir%\Microsoft.NET\Framework64\v2.0.50727
    If Microsoft Visual Studio is installed on the computer that is running SQL Server 2005, double-click
    Aspnet.config. If Visual Studio is not installed on the computer, follow these steps:
            a. Right-click Aspnet.config, point to
    Open with, and then click Choose program.
            b. In the Programs list, click
    Notepad, and then click OK.
    Locate the following tag in the <runtime> section of the code.
            <legacyImpersonationPolicy enabled="false"/>
    Change the tag to:
            <legacyImpersonationPolicy enabled="true"/>
    Save the Aspnet.config file.
    Reset IIS.
    Try your report again.
    Similar Thread for your reference:
    Using SharePoint Report Viewer
    Web Part: Error in getting session data: Invalid or Expired Session: xxxxxxxxxxx
    If only the one user or several users will got the issue, the issue can be caused by the permission setting, please reference to below blog:
    http://answers.flyppdevportal.com/categories/sqlserver/sqlreportingservices.aspx?ID=3506231b-9f4d-4f5a-884d-157137c56336
    http://blog.goobol.com/the-permissions-granted-to-user-domainusername-are-insufficient-for-performing-this-operation/
    If your problem still exists, please try to provide more details information as below:
    Did you reporting service installed in native mode or sharepoint mode, If in native mode, please try to provide more error message from the log file:
    C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Network Error []: Cannot Get Host Name when running business rules

    Guru's
    We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
    Network error []: Cannot Get Host Name
    The following is then logged in the Essbase Application logs:
    Local/Application/Database/admin@Native Directory/Error(1042022)
    Network error []: Cannot Get Host Name.
    A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
    The environment is 11.1.2.0 and the architecture is as follows:
    Server 1 - MS Server 2008 x64:
    Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
    Server 2 - MS Server 2008 x64:
    Essbase Server
    Server 3 - MS Server 2008 x64:
    Framework Services, FR Print Services
    We have tried doing the following:
    1. Put in the server host names into the hosts file on the Hyperion Servers
    2.  Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
          - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
         - Added a new DWORD Value named MaxUserPort and set it to 65534.
         - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
    3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
    4. The Essbase Config file has the following settings:
    NETDELAY 2000
    NETRETRYCOUNT 2500
    Has anyone come across this issue and if you managed to resolve it, how did you go about it.
    Thanx

    Hi Rahul
    The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
    We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
    Thanks

  • When compiling in 6.02 I get: "Error 1: Get Section names.vi:\​." (sic)

    The problem occurs (at the very end of compilation)only when compiling one particular bit of code, though reloading a version of that code which had previously compiled, still produced the same error.

    eenok,
    I would try uninstalling the Application Builder and then reinstalling it. I would also try doing a repair of the LabVIEW 6 installation by going to Add/Remove Programs for LabVIEW 6 and selecting the reinstall option.
    I say this because it sounds like either the Application builder files have become corrupted or the VI Get Section Names.vi from the Functions»File I/O»Configuration File VIs have become corrupted somehow.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • 'Server error' when getting track names

    I have iTunes 10.4 installed, and am running Windows XP Pro. When I try to 'Get track names,' iTunes responds with 'Server error.' However, I am able to connect to Gracenote online in a web browser, and I can get track names just fine in Windows Media Player, so the problem appears to be with iTunes. I have uninstalled and reinstalled iTunes, and have made sure that my firewall is not blocking iTunes. I'm not sure what else I can do. Any suggestions? Thanks.

    Ryan,
    I am assuming this was never fixed?  I have the same issue, but I think it's a port that isn't open on my firewall?  Port 8880 doesn't work...
    G

  • Network error []: Cannot Get Host Name

    Is there a config or other Essbase setting I can use to eliminate this error?
    My calc script completes successfully after an hour, the numbers are always correct.
    This error show up randomly. You don't see it for a week, then three days straight. Then gone for a month....

    Hi Rahul
    The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
    We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
    Thanks

  • Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

    Hello Experts,
    I follow the flightbooking tutorial to create a Material application to get material list. I  can start the agentry server but when I connect to SAP server and get data, I face below issue
    Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
    I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
    My javaBE
    [HOST]
    server=be1.vdc.csc.com
    APPNAME=ZCH_MATERIALLIST
    [CLIENT_NUM]
    CLIENT=800
    [SYSTEM_NUM]
    SYSNUM=01
    [LOGON_METHOD]
    ; USER_AUTH if standard UID/Password authentication is used
    ; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
    ; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
    ;   (load balancing) is used
    LOGON_METHOD=USER_AUTH
    [GLOBAL_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
    ; uses a pool of connections to the SAP backend all utilizing a single
    ;    UID/password
    UID=
    UPASSWORD=
    SHAREDCONNECTION=0
    GET_PERSONNEL_INFO=
    [SERVICE_LOGON]
    ENABLED=true
    UID=hngu3
    UPASSWORD=xxxxxxx
    UPASSWORDENCODED=false
    [GROUP_LOGON]
    ; referenced when LOGON_METHOD=USER_AUTH_GROUP
    ; individual user authentication using an SAP Message Server which distributes
    ; client connections among a "group" of SAP application servers based on load
    ; balancing criteria
    ; host name or IP address of SAP Message Server
    MESSAGE_SERVER=
    GROUP_NAME=
    SYSTEM_ID=
    CLIENT=
    [LANGUAGE]
    LANG=EN
    [LOGGING]
    Level=4
    [REQUIRED_BAPI_WRAPPER]
    com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
    com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
    com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
    com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
    com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
    com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
    com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
    com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
    com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
    com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
    com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
    com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
    com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
    com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
    com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
    com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
    com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
    com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
    com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
    com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

    Hi Tahir, please help me check the log below
    Agentry Runtime Worker Thread###throwExceptionToClient::begin |
    Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
    Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER),  |
    Agentry Runtime Worker Thread###loggedOut::begin |
    Agentry Runtime Worker Thread###HNGU3: SESSION END |
    Agentry Runtime Worker Thread###BAPI::begin |
    Agentry Runtime Worker Thread###create::nulled repository::created new repository |
    Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
    Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

  • "is an invalid session name" error during publishing in workshop

    Hello, I use OSB workshop and WebLogic server.
    When I publishing my project I get error:
    javax.management.RuntimeMBeanException.java.lang.IllegalArgumentException: is an invalid session nameI tried to reinstall domain but there is the same result.
    Thank you for ahead for any suggestion.

    Have you checked Configuration Project -> Properties -> Oracle Service Bus Configuration -> Session name?

  • RFBIBL00 error  "session name AcctDoc: No terminations have been found"

    Can anyone please help me to fix the error I am getting from RFBIBL00 report which is " session name AcctDoc: No terminations have been found". .
    Thanks for helping!

    sloved by myself.

  • How to get the job logs from sm35 by using the queue id and session name?

    hi all,
    can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
    FYI..
    i want to read this job log and i want to send it to an email id.
    -> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module  job_close.
    but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
    thanks in advance,
    koushik

    Hi Bharath,
    If you want to download it to the local file then you can follow the instructions in the below link.
    How to download Batch Input Session Log?
    Regards,
    Sachin

  • Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

    hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
    May you help
    Thanks

    Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
    tt2

  • Error in reciever file adapter , where i am getting file name dynamically

    hi all,
    error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'

    i am getting new error
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
    this is my strcuture
    and i have changed my structure
    <HEADER>
    <ADDRESS1/>
    <ADDRESS2/>
    <ADDRESS3/>
    <ADDRESS4/>
    </HEADER>
    <HEADER_GST>
    <TAX1/>
    <TAX2/>
    <TAX3/>
    </HEADER_GST>
    <LINE>
    <QTY/>
    <UOM/>
    <UNIT_AMT/>
    <CHARGE_TO_DT/>
    </LINE>
    <FILENAME>
         <FILENAME/>
    </FILENAME>
    i have given the recordset structure as
    HEADER,HEADER_GST,LINE,FILE

Maybe you are looking for