Msg.exe Error 5 Getting Session Names
Ok after 2 days of research and messing with policys i still have yet to resolve this issue. Due to vista not having netsend anymore I tried using the msg.exe command. So far I have got it to work just on my local computer. But sending it to other vista computers It gives me an error:
Error 5 getting session names
I am computer Atlantis
Destination: computer designated as "Challenger"
Both running Vista Business SP1
msg /server:atlantis admin "Test Message"
(local to local pc works)
msg /server:challenger admin "Test Message"
---> Response: "Error 5 Getting Session Names"
We are in the same work group, we are not part of a domain
Any help would be appreciated. From reading it seems to be a policy edit that needs to be changed, but I do not know what to change, so any detailed instructions would be greatly appreciated...
Alternative i tried: Also i downloaded netsend by czero.com and I can only send the message to XP computers. I cannot send a message to even myself.
Hello,
Based on some discussions about this topic, some community members provide the following tool as the replacement of net send that is not included in Windows Vista:
http://www.cezeo.com/products/netsend/
It’s said to support Windows Vista. Please give it a try.
Important Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Regards,
Lionel
Similar Messages
-
MSG.EXE Error 1722 getting session names?
I have a vista and whenever I send msg to someone else on my "workgroup" it says "Error 1722 Getting session names. I tried msg /?. It sends a message to myself though... ("msg /server:COMPUTERNAME USERNAME "MESSAGE")
Hi,
Please try the following steps:
Before modify the registry keys, please take a backup of the key. For more information about how to back up and restore the registry, please click the
following link to view the article:
Back up the registry
Please add the following registry entry with logon script:
HKLM\SYSTEM\CurrentControlSet\Control\Terminal Server
Name : AllowRemoteRPC
Type : REG_DWORD
Value : 1
References:
Net Send in Windows Vista
How to configure RPC dynamic port allocation to work with firewalls
Regards,
Sabrina
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread. -
Internal error: close session with active objects
Please help on this error msg :
Internal error: close session with active objects
this happend during the decryption.Please help on this error msg :
Internal error: close session with active objects
this happend during the decryption.You have an error on line 42 of your decryption method. -
Hello Guys,
While running a web application am getting an error like: Remote server not responding. Below are the details of event viewers which been captured at the same time when this error happened:
Event 1000, Application Error
Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb
Faulting module name: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1
Exception code: 0xe053534f
Fault offset: 0x000000000000a88d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
Event 1001, Windows Error Reporting
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: w3wp.exe
P2: 7.5.7600.16385
P3: 4a5bd0eb
P4: KERNELBASE.dll
P5: 6.1.7600.16850
P6: 4e211da1
P7: e053534f
P8: 000000000000a88d
P9:
P10:
Attached files:
C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WERC9CE.tmp.hdmp
C:\Windows\Temp\WEREE30.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0
Analysis symbol:
Rechecking for solution: 0
Report Id: d46a6849-8f6a-11e1-98af-00215e6e4855
Report Status: 4
This is an priority issue which we are facing in IIS. IIS is configured for Framework 2.0 and underlying OS is - Windows
Server 2008 R2 Standard.This issue is replicable and occurring frequently Please suggest how to resolve it. Any input related to above issue is appreciable.Please refer similar discussions and see if they help
Faulting application name: w3wp.exe
http://telligent.com/support/communityserver/community_server_2008/f/288/t/1067447.aspx
Event ID: 1000, Faulting application w3wp.exe, faulting module unknown,
http://social.msdn.microsoft.com/forums/en-US/clr/thread/9be88a2f-c8cc-4a73-9371-45ab73982123
For IIS related queries, please post them in IIS forum - http://forums.iis.net/
A UNIVERSE without WINDOWS is CHAOS !
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
About Me !!! -
"is an invalid session name" error during publishing in workshop
Hello, I use OSB workshop and WebLogic server.
When I publishing my project I get error:
javax.management.RuntimeMBeanException.java.lang.IllegalArgumentException: is an invalid session nameI tried to reinstall domain but there is the same result.
Thank you for ahead for any suggestion.Have you checked Configuration Project -> Properties -> Oracle Service Bus Configuration -> Session name?
-
Powershell error: 'Get-AzureRole' is not recognized as the name of a cmdlet
I am trying to
get PIP information on all instances of a role using Windows PowerShell
as per the document - "https://msdn.microsoft.com/library/azure/dn690118.aspx"
When I execute the command in the doc in the powershell:
Get-AzureRole -ServiceName FTPInAzure -Slot Production -InstanceDetails
The following error msg pops up:
'Get-AzureRole' is not recognized as the name of a cmdlet.
what's wrong?
Thanks
Thank you MorrisHi,
Thanks for posting !
I am currently researching to gather more information which might take some time and hence will get back to you shortly.
Appreciate your time and patience.
Regards,
Sowmya -
RFBIBL00 error "session name AcctDoc: No terminations have been found"
Can anyone please help me to fix the error I am getting from RFBIBL00 report which is " session name AcctDoc: No terminations have been found". .
Thanks for helping!sloved by myself.
-
IIS charsh with error: Faulting application name: w3wp.exe
Hi Team,Question
I am new to Window Azure. Recently I encounter a issue on my production server, where my application hosted on Azure server was automatically getting down in every 2 Hrs,when i have checked the error logs I got the error:
Faulting application name: w3wp.exe,version: 8.5.9600.16384,time stamp: 0X5215df96
Please help me out to solve the problem.
Thanks,
Ashwin
Thanks AshwinHi,
Thanks for Posting.
Please refer to the following thread which talks about the same error, and suggests analyzing the crash dump
https://social.msdn.microsoft.com/Forums/en-US/5df570d8-1f19-47b3-9d76-e737e858aa6d/iis-crash-with-faulting-application-w3wpexe-faulting-module-mscorwksdll-version-205072742?forum=clr
If this does not help, i would suggest to get a Support Ticket created so that an engineer from the TechSupport team can personally look into this issue. you can create a support ticket from within the management portal or using the following link.
http://azure.microsoft.com/en-us/support/options/
Regards,
Nithin.Rathnakar.
**There is Duplicate thread for this issue, which i will be closing marking the link for this thread.
-
HP ePrint from excel add-in: Error while getting driver name for printer
Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share, then print it from there. This happens with excel and word. I have Office Suite 2007.
Hello modameister,
Sorry you are having issues with this printer and the ePrint add-on. There are a couple of questions I would like you to answer please.
1. What operating system are you using? (XP,VISTA,7,MAC OS X)
2. What and how much data are you trying to print?
3. Have you tried to copy and paste the data into a different application or tried using the snip it tool?
4. Are you receiving any .dll errors (mscms.dll)
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
How to get the job logs from sm35 by using the queue id and session name?
hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushikHi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin -
While tring to download QuickTimeInstaller.exe, I get an error message that it is not a Win32 application. I do not know what that means. I am running Vista and Service Pack 2 is installed. I am trying to look at a math tutorial on CD that came with the textbook.
Thank you for any help or assistance.
LauraIt suggests the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Getting error logical file name not maintained adequtely
Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'DOWNL'.
Determine and construct OS specific file name *
PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
pf_with_file_extension
pf_param_1
pf_format
pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in *
download file name *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
logical_filename = 'Z_MATERIAL_BOM_FILE'
operating_system = pf_os
parameter_1 = lf_para1
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
with_file_extension = pf_with_file_extension
USE_BUFFER = ' '
IMPORTING
EMERGENCY_FLAG =
file_format = pf_format
file_name = pf_fname
EXCEPTIONS
file_not_found = 1
OTHERS = 2
Error handling.
CASE sy-subrc.
WHEN '1'.
MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'. "error message i am getting LEAVE.
WHEN '2'.
MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
LEAVE.
ENDCASE.Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani -
Error in reciever file adapter , where i am getting file name dynamically
hi all,
error in reciever file adapter , where i am getting file name dynamically, please help me in this isssue , i am trying for a long time
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_eINVOICE_RECV' found in document', probably configuration error in file adapter (XML parser error)'i am getting new error
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
this is my strcuture
and i have changed my structure
<HEADER>
<ADDRESS1/>
<ADDRESS2/>
<ADDRESS3/>
<ADDRESS4/>
</HEADER>
<HEADER_GST>
<TAX1/>
<TAX2/>
<TAX3/>
</HEADER_GST>
<LINE>
<QTY/>
<UOM/>
<UNIT_AMT/>
<CHARGE_TO_DT/>
</LINE>
<FILENAME>
<FILENAME/>
</FILENAME>
i have given the recordset structure as
HEADER,HEADER_GST,LINE,FILE -
Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"
http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue. -
I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.
Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting
Maybe you are looking for
-
Just upgraded to mountain lion and my HP Laserjet p1102W won't connect
Just upgraded to mountain lion and my HP Laserjet p1102W to print (worked fine via USB with Snow Leopard; I never had set it up wirelessly, though had wanted to do so.) HP site said if printer worked with Snow Leopard nothing would need to be done;
-
W IMac OSX v 10.9. Can this be done and if so, how?
I am
-
Multiples invoices cleared with one clearing document
Hello, Is it possible make one invoice that was cleared wrongly along with other open items? I don't want to reset clearing document because it will reset all open items and then i have to clear everything. I need only one invoice out of it to become
-
Customer field to purchase requisition
Hello, I add the customer field at subscreen of purchase requisition ( at the data base table i add the relative field in ci_ebandb include ) by EXIT_SAPLMEREQ_001 and EXIT_SAPLMEREQ_002 and EXIT_SAPLMEREQ_003. I add the same customer field at subscr
-
Unable to Embed ActiveX in Java
Hi, We are trying to embed an activex control (ocx control) in java using third party tool JacoZoom. We are not able to create an instance of com.inzoom.axjni.ActiveX class using ActiveX w = new ActiveX("DTDLG.DTDlgCtrl.1"); System.out.println(" W :