MSG HD is Coming

I was at a Verizon store today and I happened to ask about when I would be able to see MSG in HD (not expecting an answer) but I was told you have it already, then I was told she would check. So after my transaction I was told that Nov. 30th is the Day!!!!!
I only hope that that is true!! But it would be great if it is.

Caps09 wrote:
There are no blackouts on MSG for whatever region you are in. In the Buffalo area, MSG shows every Sabres game not on a national network. Same thing goes in the NY area for the Rangers, Devils, Islanders, and Knicks. The only "blackouts" in these regions would be on Versus or NHL Network, if they were showing a game to the rest of the country that's already on MSG.
I guess the only thing left for Verizon customers to wonder about is MSG 2/+2 games in HD. These were only on Cablevision on "iO Sports HD" but I've heard that they have recently shown up on DirecTV in HD. I didn't think Cablevision would have given up these feeds to anyone else, especially right now.
I am not in that area. But this is what I was refering to. It could be totally wrong. But I would still rather have BBCA HD.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=Board%3AFiOS_TV_...

Similar Messages

Tried To Restore My Ipod And Error Msg 1611 Kept Coming Up Now My Touch Keeps Showing Connect To I Tunes

Tried to restore my touch keep getting error msg 1611 and now my touch wont reset it keeps showing the connect to i tunes screen

Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694

Displaying error msg

hi,
how i display error msg on page by using af:message from beans, based on some processing? i tried , but error msg is not coming on af:message?
i m using jdv10g. i checked by system.out.println(errormsg), & it displaying in console, but not on af:message.
thanks

hi thanks,
it is showing the message on af:messages on top of page. i want to display it on af:message fm bean.
i dragged a af:message fm components palette. i associated its value attribute to errormsg property in bean like this-
<af:message id="m1" message="#{xxbean.errormsg}"
inlineStyle="color:rgb(255,0,0);"/>
//in bean
private String errormsg = "";
based on some processing i filled the 'errormsg' property with desirable error string, by this.errormsg="error....." .
& getter method is there for returing the value, on page.
GlobalOnly= true for af:messages.
i m using 10gdev
Edited by: user78995 on Apr 7, 2010 2:44 AM

URGENT!! Error While Running Tutorial Test Page.

Hi,
We have been facing an issue while setting up the JDeveloper and running the test page.
ERROR IS:
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1142)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1794)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:3931)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:786)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND-INVALID APPLICATION. Tokens: APPL = fnd; (Could not lookup message because there is no database connection)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:3931)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:786)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
at OA.jspService(OA.jsp:40)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
at OA.jspService(OA.jsp:45)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
=============================================================
=============================================================
The msgs that are coming up in the embedded oc4j log is:
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\JDEV\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar;C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Dhttp.proxyHost=proxy.mtn.co.za -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=196.13.231.*|webmail.mtn.co.za|autodiscover.mtn.co.za|10.204.5.2|10.204.5.1|*.thecomputerpeople.co.za|virtual.thecomputerpeople.co.za|oms.thecomputerpeople.co.za|*.rentamobile.co.za|*.rentatomtom.co.za|*.mobilesolutions.co.za|*.yelloworld.co.za|*.yellostg.co.za|*.yellodev.co.za|10.217.200.91|eprowebserver.mtn.co.za|10.217.205.64|*.mtn.com|196.11.240.*|196.13.230.*|*.mtnactive.co.za|*.yellomtn.com|*.yellomtn.co.za|*.mtn.co.za -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\JDEV\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 1484 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
Tutalii: C:\JDEV\jdevbin\jdev\appslibrt\iasjoc.zip archive
ICX DIAGNOSTIC: FND_TOP = C:\JDEV\jdevhome\jdev\dbc_files\
ICX DIAGNOSTIC: application_id = 601
ICX DIAGNOSTIC: responsibility_id = 24742
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: mEncryptedSessionID = VOJ1vU0LWyvpCvPMgp0CPqNg:S
ICX DIAGNOSTIC: mSessionID = 1874125765
ICX DIAGNOSTIC: mTransactionID = 1962477773
==========================================================
==========================================================
We have setup the same JDEV patch on 2 machines having the same DBC files and the same application logins as well as the same responsibility keys.
But it is working fine on one machine and we are able to run the test page as well as any custom page that we are developing.
but on one machine we are unable to run even the test page.
Both are also on the same network.
We are struck as we are unable to do any work.
Could anyone please suggest any solution to this.
I have gone through the numerous posts regarding this kind of error, but have not been yet able to resolve.
Thanks

As per error message, the problem is with the Database connection.
Check again if your using wright dbc file, you can check it through connection string given in the dbc file
and also try connecting the database through sql developer.
--prasanna

No records in titl block when running in application server

hi all,
i am facing problem when running forms in application server. the error msg whcih is coming is FRM-41092: No Records in block TITL.
can any one help pls.....
Regards
Natesh

how about - directly after querying the master record...
go_block(<block>)
if :blk.key (or :blk.rowid) is null then
SET_ITEM_PROPERTY('<buttonname>',enabled, property_false);

Cash sales billing i

Hi,
I raised the cash sale and it given the Doc no also but when i gone for billing in processing status it is telling Not processed
How can i do the billing for this ?
same msg is also coming for rush order

hi murali,
It true but the ownership of the materials has to be changed to customer, this is done by using PGI.
If it is order realted billing, then the sale document BV-cash sales should not the delivery docuement type like credit memo request.Check in tcode:vov8
please check
regards,
Arun prasad
Message was edited by:
arun prasad

Cant access tty

I'm using a live a CD of arch-core-2010.05-x86_64 and Ive used a usb to do the installation process but i failed to setup grub correctly so i had to reinstall
when using the usb i get the error: missing operating system
but anyways im not gonna do the usb installation im just gonna do the live CD
when doing live CD install i get these errors
boot device dint show up after 30 seconds
falling back to interactive prompt you can fix the problem manually
/bin/sh: cant access tty: job control turned off
my hard drive is clean there are no operating systems installed
i have search on Google and all the problems i could find with the same error msgs are mostly coming from usb installs
does anyone have any info on the subject if so it would be greatly appreciated
thanks

Did you plug in the USB and tried to install there or trying to install in your hard disk? Please look into the wiki for USBstick installation.

Generic Delta Update using Function Module........ problem with CURR type

Hi Experts,
I try to create a generic data source using the transaction RSO2. I got the following error message
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
How shall i handle this issue..........any suggestions please........
thanks in advance
Cheers
Jaya

Hi Jaya ,
The error msg which is coming as...
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide" may be due to the currency field made hidden at the data source lavel. Also check weather you have included it in your structure (code).
So, to check it and make it unhide go to "Display Field List (F7)" in RSO2.
Hope it helps.

Soa Suite 11g related doubt.

Hello All,
We are currently using Soa Suite 11g where in we have the SOA composite having a BPEL process which would de-queue the B2B payload from the seeded IP_IN_QUEUE existing within the b2b database.
Earlier on 10g we were able to get the B2B Message id from the Payload Header --> Msg ID field , along with other fields like : FROM_PARTY , TO_PARTY , DOC_TYPE etc when we used to receive the de queued message payload using the Receive Activity.
Now in 11g we see that this Msg ID is coming as NULL
Could someone please help us how in the BPEL process we could get the B2B Message ID corresponding to this successfully processed payload in B2B. ???
while doing the Outbound EDI transactions for hitting the B2B we used to Enqueue the payload message to the IP_OUT_QUEUE and populate the property named : jca.aq.Headerdocument on the Invoke Node in the bpel process with the values like this in string format : <payload><doc_type>850</doc_type><sender>host party</sender>...etc so that it identifies the valid agreement and deployment using From & To Party & document name.
Now while getting the Message out from b2b internal queues , how do we get the b2b message id ???
Could someone please help with this..we are currently stuck because of this issue..
regards

a few blogs :
http://sriworks.wordpress.com/2010/12/20/oracle-certification-oracle-soa-foundation-practitioner1z0-451/
http://oraclefusionmiddleware.blogspot.com/2011/01/oracle-soa-foundation-practitioner.html
http://www.oracle.com/partners/en/knowledge-zone/middleware/oracle-service-oriented-architecture-soa/soa-exam-page-170307.html
and what helped for me was reading the soa suite books (around 2 or 3 of them i guess, google on them) and user/developer guides

JScrollPane Doesn;t appear in JScrollPane?

hi Following is the code of JPanel that contains JScrollPane.
And JScrollPane adds again CompareView Panel
CompareViewPanel is using custom defined Layout CompareViewLayout .
But this as a output this panel is not showing the proper JScrollPane when outer frame size is lesser then the current panel(which contains JScrollPane).
public class GalleryViewRightPanel extends JPanel {
* Layout Manager
private List <CapturedScreenControl> students;
* Scroll Container.
private final JScrollPane compareScrollPane;
private final CompareView screenCtlContainerPanel;
public GalleryViewRightPanel(List <CapturedScreenControl> students)
//TODO - Add in super() Your Own Made Layout that will take care
// of all the selected elements.
//super();
final int unitIncr = 96;
final int blockIncr = 192;
this.students = students;
this.screenCtlContainerPanel = new CompareView(new CompareViewLayout());
this.screenCtlContainerPanel.addComponentArray(this.students);
compareScrollPane = new JScrollPane(screenCtlContainerPanel,
JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
compareScrollPane.getVerticalScrollBar().setUnitIncrement(unitIncr);
compareScrollPane.getVerticalScrollBar().setBlockIncrement(blockIncr);
compareScrollPane.getHorizontalScrollBar().setUnitIncrement(unitIncr);
compareScrollPane.getHorizontalScrollBar().setBlockIncrement(blockIncr);
//setSize(compareScrollPane.getPreferredSize());
add(compareScrollPane,BorderLayout.CENTER);
setBorder(BorderFactory.createLineBorder(new Color(0,0,255,2)));
public List<CapturedScreenControl> getStudentList()
return students;
public void setStudentList(final List<CapturedScreenControl> screenControl)
students = screenControl;
screenCtlContainerPanel.addComponentArray(students);
//setSize(compareScrollPane.getPreferredSize());
public void SetInfo()
class CompareView extends JPanel
public CompareView(LayoutManager layout)
super(layout);
public void addComponentArray(List <CapturedScreenControl> screens)
removeComponentList();
//Add Here All Components.
for(CapturedScreenControl s: screens)
//add(s);
Rectangle rect = s.getBounds();
add(new CompareImage(null,null,false,false,rect));
updateUI();
public void singleComponentArray(CapturedScreenControl screen)
//removeComponentList();
//Add here this screen component.
//if(screen != null)
// add(screen);
public void removeComponentList()
removeAll();
class CompareViewLayout implements LayoutManager
private int leftGap,topGap,middleGap,rightGap,bottomGap;
* @param left : Left Gap before arranging Components.
* @param top : Top Gap before arranging Components.
* @param middle : Middle Gap between Components.
* @param right : Right Gap before arranging Components.
* @param bottom : Bottom Gap before arranging Components.
public void setGaps(int left,int top,int middle, int right,int bottom)
this.leftGap = left;
this.topGap = top;
this.middleGap = middle;
this.rightGap = right;
this.bottomGap = bottom;
@Override
public void addLayoutComponent(String name, Component comp)
// TODO Auto-generated method stub
// No need.
@Override
public void layoutContainer(Container parent)
Dimension max = calculateSize(parent);
Dimension size = parent.getSize();
int compCount = parent.getComponentCount();
if ((max.width == 0) || (max.height == 0)) {
return;
int rowCount = compCount/ScreenCaptureConstant.GALLERY_TWO_COMPONENT_SCREEN;
int colCount = 1;
if(rowCount == 0)
rowCount = 1;
if(compCount > ScreenCaptureConstant.GALLERY_MIN_COMPONENT_SCREEN)
colCount = ScreenCaptureConstant.GALLERY_TWO_COMPONENT_SCREEN;
int x = leftGap;
int y = topGap;
int row = 0;
int col = 0;
for(int count=0;count<compCount;count++)
//Here Set XY-position and Size for all the controls.
Component c = parent.getComponent(count);
c.setLocation(x, y);
c.setSize(max);
col++;
if(col >= colCount)
col = 0;
row++;
//Set here other Controls.
x = (col * (max.width + leftGap)) + middleGap;
y = (row * (max.height + topGap)) + middleGap;
@Override
public Dimension minimumLayoutSize(Container parent)
Dimension componentDim = new Dimension(0,0);
int componentCount = parent.getComponentCount();
//Only one component.
if(componentCount == ScreenCaptureConstant.GALLERY_MIN_COMPONENT_SCREEN)
//Considering that device types are of NSpire Device.
componentDim.height = ScreenCaptureConstant.SINGLE_NSPIRE_COMONENT_HEIGHT + topGap + bottomGap;
componentDim.width = ScreenCaptureConstant.SINGLE_NSPIRE_COMPONENT_WIDTH + leftGap + rightGap;
//Two Components.
else if(componentCount == ScreenCaptureConstant.GALLERY_TWO_COMPONENT_SCREEN)
componentDim.height = ScreenCaptureConstant.MULTIPLE_NSPIRE_COMONENT_HEIGHT + topGap + bottomGap;
componentDim.width = (2*ScreenCaptureConstant.MULTIPLE_NSPIRE_COMPONENT_WIDTH) + leftGap + rightGap + middleGap;
//More than Two Components.
else if(componentCount > ScreenCaptureConstant.GALLERY_TWO_COMPONENT_SCREEN &&
componentCount <= ScreenCaptureConstant.GALLERY_MAX_COMPONENT_SCREEN )
componentDim.height = (2*ScreenCaptureConstant.MULTIPLE_NSPIRE_COMONENT_HEIGHT) + topGap + bottomGap + middleGap;
componentDim.width = (2*ScreenCaptureConstant.MULTIPLE_NSPIRE_COMPONENT_WIDTH) + leftGap + rightGap + middleGap;
return componentDim;
@Override
public Dimension preferredLayoutSize(Container parent)
Dimension singleScreenSize = calculateSize(parent);
int cnt = parent.getComponentCount();
if(cnt <= 0)
return new Dimension();
int cols = 1;
if(cnt > ScreenCaptureConstant.GALLERY_MIN_COMPONENT_SCREEN)
cols = ScreenCaptureConstant.GALLERY_MAX_COMPONENT_SCREEN;
int rows = cnt / cols;
if (cnt == 0)
return new Dimension();
else
Dimension ret = new Dimension(singleScreenSize);
ret.width = cols*(ret.width) + leftGap + rightGap + (cols-1)*middleGap;
ret.height = rows*(ret.height) + topGap + bottomGap + (rows-1)*middleGap;
return ret;
@Override
public void removeLayoutComponent(Component comp)
// TODO Auto-generated method stub
* @return
private Dimension getBestFitSize(Dimension crntSize,Dimension maxsize,int nDeviceType)
//Calculate here best fit.
//This will say the best size of the component.
int minWidth = crntSize.width;
int minHeight = crntSize.height;
while(minWidth+4<=maxsize.width && minHeight+3<=maxsize.height)
minWidth = minWidth + 4;
minHeight = minHeight + 3;
return new Dimension(minWidth,minHeight);
* @param parent : Calculate Each Component Size.
* @return
private Dimension calculateSize(Container parent)
int componentCount = parent.getComponentCount();
Dimension parSize = parent.getSize();
Dimension comSize = new Dimension();
if(componentCount == ScreenCaptureConstant.GALLERY_MIN_COMPONENT_SCREEN)
//Logic to get the zoom
//Only For NSpire Device.
comSize.height = ScreenCaptureConstant.SINGLE_NSPIRE_COMONENT_HEIGHT;
comSize.width = ScreenCaptureConstant.SINGLE_NSPIRE_COMPONENT_WIDTH;
parSize.width -= (leftGap + rightGap);
if((parSize.width > comSize.width) &&
(parSize.height > comSize.height))
//Here We Get the size for the One Image.
return getBestFitSize(comSize,parSize,0);
else if(componentCount > ScreenCaptureConstant.GALLERY_MIN_COMPONENT_SCREEN)
//Only Considering for NSpire Devices.
comSize.height = ScreenCaptureConstant.MULTIPLE_NSPIRE_COMONENT_HEIGHT + middleGap;
comSize.width = ScreenCaptureConstant.MULTIPLE_NSPIRE_COMPONENT_WIDTH + middleGap;
//Logic to get the zoom for multiple screens.
parSize.width -= (leftGap + rightGap + middleGap);
parSize.width = parSize.width/2 ;
//Calculate Here the Size of Each Component.
return new Dimension(parSize.width,getHeightFromWidth(parSize.width,0));
return comSize;
private int getHeightFromWidth(int nWidth,int nDeviceType)
int nHeight = (nWidth*3)/4;
return nHeight;
class CompareImage extends Component {
private static final Logger log = Logger.getLogger("gui.capturedScreen.CompareImageComponent");
private Image lastGoodScreenImage;
private Image screenImage;
private boolean loaded;
private boolean hasErrored;
private Rectangle rect;
* @param lastGoodImage
* @param screenImage
* @param loaded
* @param error
* @param rect
public CompareImage(Image lastGoodImage,Image screenImage,boolean loaded, boolean error,Rectangle rect)
super();
this.lastGoodScreenImage = lastGoodImage;
this.screenImage = screenImage;
this.loaded = loaded;
this.hasErrored = error;
this.rect = rect;
public synchronized void paint(Graphics g)
String msg = "Image is Coming soon..." + rect.x + "," + rect.y + "," + rect.width + "," + rect.height;
g.drawString(msg, 20, 20);
Please help me to identify why this is not working??
Thank you.
Ajit.

Hi,
I Had created "class CompareViewLayout implements LayoutManager".
Now you can see its implementation in code. This CompareViewLayout is used in CompareView Panel.
And In compareScrollPane (JScrollPane) takes CompareView Panel as an argument in constructor.
And compareScrollPane is added in Container(Top Level Panel) class.
Now here,
Whenever preferredLayoutSize() function of the LayoutManager is called, that will set the Components.
But this functions is several time not called on resize of the frame..... normally this function called on each resize operation.
In short Anyone Having idea what are the cases when preferredLayoutSize() function of the LayoutManager is not called ??
And what to take care to avoid it??

Reports of Text Msg from VERIZON re: ICS coming -- anyone else?

Being reported in the MotoRazr Maxx forum - users supposedly getting a TEXT msg frmo Verizon re: ICS 4.0 coming :
The message started out:
Your phone will soon be upgraded to Android 4.0. At that time we will remove your Verizon Wireless Mobile IM app because it is not supported on Android 4.0. Please download a new instant messaging app... snip ...
Anyone else getting this?

I REALLY wish VZN would include some base FREE Text Messaging as part of all these changes coming up to their plans and ICS .. Something like 25 Free Text Msgs per month ... Reason being is that I have Unlimited Data right now (not using more than 1GB per month) and no Texting Plan ... so I get nickled & dimed by SPAM Texts that I get every month. (I don't want to turn OFF SMS because I get/send valid MSGS from time to time, just not many.)

HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine?

When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue earliest.

Hi Guys
I have an issue please help on that earliest.
When am trying to install Windows server 2008 OS. Error msg was coming 0x80070070:"not having enough space for installation"..Even though i have 20GB space?..Pls resolve this issue immediately.
Regards,
Shiv

Is this a clean install or an upgrade? 20 GB, though greater than the minimum, is pretty minimal. How much memory do you have on the system? 2008 would try to create a page file of 1.5x physical memory, so if you are building on a large
memory system, you could be having an issue there.
"Pls resolve this issue immediately"
Forums are not for support. They are monitored by people, like yourself, who are willing to take time out of their days to provide the benefit of their past experience. If you need support, you need to purchase a support contract from Microsoft
or some other party.
. : | : . : | : . tim

Field T_STCD1 does not exist in form this erroe msg coming in smartform

hi,
in my smartform, if i give one set of input like, 1st qtr of 2008, vendor and compcode, its displaying the value.
but if i give the input like 1st qtr of 2007, vendor and some other compcode its giving some error like
field T_STCD1 does not exist in form .
this error coming after printpreview and not displaying.
how can i debug it.
can any one help me...........plz
its very urgent.
thanks.

report zmm_vat_ex_cert message-id zz                        .
                         TABLE DECLARATION                           *
tables: bseg , tvko.
*Intenal Tables Declarations                                           *
types: begin of it_address_type .
        include structure zvat_vendor.
types :end of it_address_type.
types : begin of it_address_info_type.
        include structure zadrc_table.
types: end of it_address_info_type.
types : begin of it_desig_type.
        include structure zmm_vat_sign.
types: end of it_desig_type.
types: begin of it_bkpf_type,
      bukrs type bkpf-bukrs,
      belnr type bkpf-belnr,
      gjahr type bkpf-gjahr,
      blart type bkpf-blart,
      bldat type bkpf-bldat,
      xblnr type bkpf-xblnr,
      awkey type bkpf-awkey ,
      end of it_bkpf_type.
types : begin of it_bseg_type,
      bukrs like bseg-bukrs,
      belnr like bseg-belnr,
      gjahr like bseg-gjahr,
      bschl like bseg-bschl,
      mwskz like bseg-mwskz,
      shkzg like bseg-shkzg,
      wrbtr like bseg-wrbtr,
      sgtxt type bseg-sgtxt,
      end of it_bseg_type.
types: begin of it_rseg_type,
       ebeln like ekpo-ebeln,
       ebelp like ekpo-ebelp,
       bukrs like bkpf-bukrs,
       txz01 type ekpo-txz01,
       wrbtr type rseg-wrbtr,
       end of it_rseg_type.
data:begda type d, endda type d.
types: begin of it_item_type.
        include structure zitem_vat.
types:end of it_item_type.
data: it_rseg type table of it_rseg_type,
       wa_it_rseg like line of it_rseg.
data: gt_addr type table of it_address_type.
data gt_addr_info type table of it_address_info_type.
data gt_bkpf type table of it_bkpf_type.
data gt_bseg type table of it_bseg_type.
data:
      gt_tvko type standard table of tvko,
      gt_item type table of it_item_type,
      h_itab type table of it_bseg_type,
      it_desig type table of it_desig_type,
      temp_item type table of it_item_type .
data:wa_addr like line of gt_addr,
     wa_addr_info like line of gt_addr_info,
     wa_bkpf like line of gt_bkpf,
     wa_bseg like line of gt_bseg,
     wa_item like line of gt_item,
     wa_h_itab like line of h_itab,
     wa_it_desig like line of it_desig,
     wa_temp_item like line of temp_item,
    wa_tvko LIKE LINE OF gt_tvko.
     wa_tvko type tvko.
     Data Declaration                                                *
data: sumtotal type bseg-wrbtr, "rbkp-waers ,
      sl_no type zmm_vatex_sno-serial_no,
      fiscal_year type string,
      fm_name type rs38l_fnam ,
      w_q_flag(5),
      w_quarter type string ,
      close_date type sy-datum ,
      fiscal type sy-datum, fiscal_nxt type sy-datum,
      gv_belnr type bkpf-belnr,
      gv_gjahr type bkpf-gjahr.
data: ca_quarter type i.
data: l_adrnr type t001-adrnr.
data wa_vatex_sno type zmm_vatex_sno.
data: q(1).
data: stdtext(25).
S E L E C T I O N   S C R E E N                                     *
selection-screen begin of block b1 with frame title text-s01.
select-options: s_date for sy-datum obligatory no-extension.
parameters : vendor type lfa1-lifnr obligatory ,
             compcode type bkpf-bukrs obligatory.
select-options taxcode for bseg-mwskz obligatory default 'VI'.
selection-screen end of block b1.
at selection screen
at selection-screen on s_date.
if s_date-low0(4) <> s_date-high0(4).
    message e023 with text-e01.
endif.
*get calendar quarter using the month entered in From date.
*calculate the fiscal year and quarter
if s_date-low4(2) > '0' and s_date-low4(2) <= '3' .
    ca_quarter = 1.
    fiscal0(4) = s_date-high0(4) .
    fiscal_nxt0(4) = s_date-high0(4) - 1.
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate 'last quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
    into w_quarter separated by space .
    q = '4'.
elseif ( s_date-low4(2) > '3' and s_date-low4(2) <= '6' ).
    ca_quarter = 2.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '1st quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
     into w_quarter separated by space .
    q = '1'.
elseif ( s_date-low4(2) > '6' and s_date-low4(2) <= '9' ).
    ca_quarter = 3.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '2nd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '2'.
elseif ( s_date-low4(2) > '9' and s_date-low4(2) <= '12' ).
    ca_quarter = 4.
    w_quarter = '3rd quarter of year'.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '3rd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '3'.
endif.
*get first and last day of quarter by fetching calendar quarter and year in FM
call function 'HR_99S_GET_DATES_QUARTER'
    exporting
      im_quarter = ca_quarter
      im_year    = s_date-low+0(4)
    importing
      ex_begda   = begda
      ex_endda   = endda.
*validate the input dates is start and end of quarter
if s_date-low <> begda or s_date-high <> endda.
    message e023 with 'Enter quarter begin and end dates only'.
endif.
*get last day of next month. for close date
endda = endda + 1.
call function 'RP_LAST_DAY_OF_MONTHS'
    exporting
      day_in            = endda
    importing
      last_day_of_month = close_date
    exceptions
      day_in_no_date    = 1
      others            = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Start of Selection
start-of-selection.
*CNO is specific to a Quarter/ Company code/ Vendor.
unpack vendor to vendor.
clear:sl_no, wa_vatex_sno.
select single * from zmm_vatex_sno into wa_vatex_sno where from_date
eq s_date-low and to_date eq s_date-high and vendor eq vendor
    and compcode eq compcode.
if sy-subrc eq 0.
    sl_no = wa_vatex_sno-serial_no.
else.
    select max( serial_no ) from zmm_vatex_sno into wa_vatex_sno-serial_no WHERE
      from_date eq s_date-low and to_date eq s_date-high and compcode eQ compcode.
    if sy-subrc = 0.
      sl_no = wa_vatex_sno-serial_no + 1.
    else.
      sl_no = 1.
    endif.
    wa_vatex_sno-from_date = s_date-low.
    wa_vatex_sno-to_date = s_date-high.
    wa_vatex_sno-vendor = vendor.
    wa_vatex_sno-compcode = compcode.
    wa_vatex_sno-serial_no = sl_no.
    insert zmm_vatex_sno from wa_vatex_sno.
endif.
*data selection from bkpf by date,fiscal and compcode
refresh gt_bkpf.
select bukrs
        belnr
        gjahr
        blart
        bldat
        xblnr
        awkey
        into table gt_bkpf from bkpf
        where bukrs eq compcode and
        budat in s_date and gjahr eq fiscal+0(4).
check not gt_bkpf[] is initial.
refresh gt_bseg.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr
         sgtxt from bseg into table gt_bseg
    for all entries in gt_bkpf where
          bukrs eq compcode and
          mwskz in taxcode and
          lifnr eq vendor and
         belnr = gt_bkpf-belnr and
     gjahr = gt_bkpf-gjahr and shkzg = 'H'.
selection without vendor   and posting key 40     *
refresh h_itab.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr from bseg into table h_itab
         for all entries in gt_bseg
         where bukrs = gt_bseg-bukrs and
         belnr = gt_bseg-belnr and
         mwskz = gt_bseg-mwskz and
         gjahr = gt_bseg-gjahr and
         ( bschl = '40' or bschl = '21' ).
if sy-subrc = 0.
deduct the amount if posting key is 40 for PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '40'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart <> 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr
         and bschl = wa_bseg-bschl .
      endif.
      clear wa_h_itab.
    endloop.
deduct the amount if posting key is 21 for non-PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '21'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart = 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr.
      endif.
      clear wa_h_itab.
    endloop.
endif.
final internal table
clear wa_item. refresh gt_item. clear wa_bseg.
loop at gt_bseg into wa_bseg.
    read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr .
    if sy-subrc = 0.
      move :
       wa_bkpf-xblnr to wa_item-xblnr,
            wa_bkpf-belnr to wa_item-belnr,
            wa_bkpf-bldat to wa_item-bldat,
           wa_bseg-wrbtr to wa_item-wrbtr.
    endif.
*selections for item description
    refresh it_rseg.
    select ekpoebeln ekpoebelp ekpobukrs txz01 rsegwrbtr
      into table it_rseg
      from rseg join ekpo
      on rsegebeln = ekpoebeln
      and rsegebelp = ekpoebelp
      and rsegbukrs = ekpobukrs
        where rsegbelnr = wa_bkpf-awkey(10) and rseggjahr = wa_bkpf-gjahr AND
        ekpo~bukrs = wa_bkpf-bukrs.
    if sy-subrc = 0.
      loop at it_rseg into wa_it_rseg.
        wa_item-txz01 = wa_it_rseg-txz01 .
        if sy-tabix <> 1.
       wa_item-wrbtr = wa_it_rseg-wrbtr .
          wa_item-wrbtr = space .
        endif.
        append wa_item to gt_item.
      endloop.
    else.
      wa_item-txz01 = wa_bseg-sgtxt.
      append wa_item to gt_item.
    endif.
    clear: wa_bseg, wa_item.
endloop.
*if records not found give message.
if gt_item[] is initial.
    message e000(vz) with text-x01.
endif.
calculate the sumtotal
loop at gt_item into wa_item.
    sumtotal = sumtotal + wa_item-wrbtr .
endloop.
     Selecting supplier address                                     *
select single * from tvko into wa_tvko where vkorg = compcode.
append wa_tvko to gt_tvko.
if wa_tvko-vkorg = '2014'.
    stdtext = 'Z_2014_SOFTEX'.
elseif wa_tvko-vkorg = '2006'.
    stdtext = 'Z_2006_SOFTEX'.
else.
    stdtext = wa_tvko-txnam_adr.
endif.
select lifnr
         name1
         name2
         ort01
         ort02
         pfach
         stras
         regio from lfa1 into table gt_addr
         where lifnr eq vendor .
     Selecting sez address                                         *
SELECT SINGLE adrnr FROM t001 INTO l_adrnr WHERE bukrs EQ compcode.
SELECT name1
      name2
      city1
      city2
      post_code1
      post_code2
      street
      house_num1
      FROM adrc INTO TABLE gt_addr_info
      WHERE addrnumber = l_adrnr.
     Information for designation                                    *
select * from zmm_vat_sign into table it_desig where company = compcode
     Call Function module SSF_FUNCTION_MODULE_NAME                *
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 = 'ZMM_VAT_EX_CERT'
VARIANT                  = ' '
DIRECT_CALL              = ' '
   importing
     fm_name                  = fm_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Call Function module fm_name                                  *
call function fm_name
    exporting
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
      doc_num                    = sl_no
      quarter                    = w_quarter
      date                       = s_date-high
      sumtotal                   = sumtotal
      close_date                = close_date
      fiscal_year              = fiscal_year
      ca_quarter             = q
      text_name             = stdtext
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    tables
      itab                       = gt_item
      it_address                 = gt_addr
      it_infoaddress              = gt_addr_info
      it_designation             = it_desig
      it_tvko                   = gt_tvko
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Error msg keeps coming up

When I open a previous project in DW I get the following msg
"while executing on blur in link.htm the following javascript error(s) occurred:
at line 67 of Applications, Adobe Dreamweaver CS5 Configuration: inspectors link:js; dom has no properties
how do I correct this?
RD

When I open a previous project in DW I get the following msg
"while executing on blur in link.htm the following javascript error(s) occurred:
at line 67 of Applications, Adobe Dreamweaver CS5 Configuration: inspectors link:js; dom has no properties
how do I correct this?
Try Step #4 from this TechNote:
http://kb2.adobe.com/cps/405/kb405604.html#dat
Randy

MSG HD is Coming

Similar Messages

Maybe you are looking for