Msg id and msg no : End of processing in API: CSAP_MAT_BOM_MAINTAIN
hi.... i went execute CSAP_MAT_BOM_MAINTAIN, i get the following information message.
>>> End of processing in API: CSAP_MAT_BOM_MAINTAIN
can anyone help me with the message id and message number used by SAP to give this error?
thanks in advance.
Hi karthik raja spic,
the ability to read is widely regarded as a clear advantage.
The documentation of function module CSAP_MAT_BOM_MAINTAIN notes that you shall use FM CSAP_MAT_BOM_CREATE.
Regards,
Clemens
Similar Messages
-
I thought it might be a compatibility issue with Windows Vista but the same problem happened on a computer with Windows 7. I'm not sure if the Windows 7 problem was resolved, though.
You probably have other problems but for a start right click on your task bar and click on Start Task Manager. In "Applications" if Firefox is shown, click on "End Task". In "Processes" if Firefox.exe is shown, click on "End Process" and ignore the warning and click"End Process" again. Wait for a few seconds then start Firefox in the usual way. There is a chance that this may solve your problems.
If not, you probably will need to do a complete uninstall and re-install. If you can't start Firefox you could try starting in Safe Mode - Hold down Shift key as you double click on the Firefox icon>ignore the page that opens>and Continue. If you've been able to open Firefox you could work through this Troubleshooting Procedure -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
If at any stage you are not making progress, report back here for best advice on an Uninstall/Re-install which is quite likely to be necessary. -
My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(
Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all
-
I am running Firefox 4.0 beta 7 on Windows XP Tablet Edition OS. When I enter this site using Firefox, the browser stops responding and I have to end the process using Task Manager. However, when I open it with other browsers such as IE8, I am able to view the site as per normal. This only happened when I updated my browser to Beta 7 and I did not have such problems in the previous betas.
There is [[Flash]] content on that page.
Do you have a problem with Flash on other websites?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Retain item in Inbox and confirm end of processing
HI All,
I am trying to implement retaining item in inbox if user selects to cancel. I was told confirm end of processing is best otpion, when I try to change the task using pftc it still shows the confirm end of processing and background processing as greyed out.
First question will be if it is foreground processing and honest answer is I dont know, however I assume that since we open invoices and access it from inbox, it is foreground processing item.
Can you please advise ?
thanks,
RSHi Reena,
to find out if it's a foreground(Dialog) task or not, go to the task (PFTC) and see below the Method. If it says "Object method with Dialog", then its a foreground or dialog task. that means, a user intervention is required to execute this method. Another way, is go the method & BO in SWO1 and dblclick on the method. IF the Dialog check box is checked, then its a dialog task.
And, in the invoices, if you are using FIPP or BUS2081.CHANGE method, then,its a dialog task.
Hope this helps
venu -
Whenever I shutdown iTunes on my computer, it keeps re-opening and I have to go to Task Manager and end the process in order for it to shutdown.
Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
Firefox does not close in the normal fashion. I have to go to Task Manager and end the process
I am operating on a Windows XP OS. I have been a FireFox user for several years. I am using version 3.6.13 Several months ago I noticed that if I closed FireFox I could not open it again. I got a message box stating that FireFox was still running. And, I fact, Task Manager did show that it was still active. I had to end the process there, before I could open FireFox again. It will remain active in the background and the CPU will be maxed out, thus creating problems for other programs. How can I remedy this problem? btw, I have trouble opening IE now.
https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
-
after installing f/fox 4 if i close itdown i get message f/fox is still running i have to go to task mgr and end fox process sometimes this doesnt work i then have to reboot pc this is very annoying
any ideas ? rgds conhttps://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit
-
Replenishment - Msg WT134: Store order processing did not return any result
During the Replenishment run using TCODE: WRP1 following error is being encountered
<b>Msg WT134: Store order processing did not return any result</b>
The error is reported when more than 9 articles are being used.impelemented the oss note: 979935
-
I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF. I have uninstalled FF and re-installed it and no change.
WaltSee "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
was at the end of processing the file when i received and error (3004) . what do i do
http://lmgtfy.com/?q=iPhone+error+code+3004
-
Even if I'm not doing anything, no matter how few tabs I have open, Firefox will slowly increase in memory (RAM) usage until it's using nearly 100% of my computer's RAM, and everything basically freezes. Even when I close the window, the process continues to run, and I have to end the process in the task manager in order to get it to stop using RAM. I've tried disabling all my add-ons, and that does not help.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
When I click options in addons/extensions the addon window freezes and I have to use the task manager to end the process. Any solutions?
There may be a problem with one of the files that stores details of installed extensions. Try deleting these files as shown in the "Corrupt extension files" section of this link - https://support.mozilla.com/kb/Unable+to+install+add-ons
Though that article is not specifically about your problem, the method shown in the corrupt extension files section may help. When you restart Firefox after deleting those files, the list of installed extensions is rebuilt and this will hopefully fix your problem.
Maybe you are looking for
-
Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot
-
HT1689 I cannot click my ID on iTunes & App Stores.
I cannot click my ID on iTunes & App Stores. And I have to change the country and region Im in. What to do please?
-
Writing to Oracle is painfully slow, can i speed it up?
I am testing the Collections.sort() method on java.util. I have a table with 100,000 numbers. From an external program, I connect, build an ArrayList filling it with a looped read, sort the items and write the sorted list back with: for (Iterator i =
-
Updating Sales order with BAPI_SALESORDER_CREATEFROMDAT2
Hi All , I am not able to Update two Zfields in vbap using FM BAPI_SALESORDER_CREATEFROMDAT2, In create mode I am able to save values into those fields . I have checked the fields in structures ZZVBAP (append structure of VBAP)
-
Hi Experts.... I am attending interviews.... where i am frequently asked by a question.... What is the tuffest scenario you faced and how do you solved that????.... could anyone share their situation faced with the solution.....