Msg no F5598(Posting keys for acnt determ for transac. ERS do not exist
A. Posting keys for acnt determ for transac. ERS do not exist
B. Error in acnt determination(:table T030K key INT1 MWS Msg No FF709)
C. How to carru out TOR?
I am facing the same problem as below :
==================================================================
Posting keys for account determination for transaction ZZZ do not exist
Message no. F5598
Diagnosis
The posting keys necessary for account determination for transaction ZZZ have not been set.
System Response
Because the posting key is missing, the system cannot generate any automatic postings.
Procedure
Maintain the posting keys necessary for transaction ZZZ.
====================================================================
Any idea how to resolve it.
Njoy
Siva
Similar Messages
-
Posting keys for account determination for transaction ERS do not exist
Dear All,
When I try to create an accounting document for a billing document, the below error happened:
Posting keys for account determination for transaction ERS do not exist.
Could any one of you meet the issue before and give me some advice? Thanks a lot.
RayDear,
In your pricing procedure check whether any sales deductions / discounts condition type is maintained and against that maintain ERS account key.
and Go to VKOA and maintain gl account against your Kofi and KOFK for account key ERS.
try and let us know
regards,
SUdhir -
Reverse posting key specification is missing for posting key 80
A FI document was wrongly posted with posting key "80" instead of 40. And now we are not able to reverse it. System is giving following error --
"Reverse posting key specification is missing for posting key 80"
Document posted as
50 207200 CASH - MAIN-O.H. 762.00-
40 410120 CONVEYANCE EXPENSES 702.00
<b>80 402440 STAFF WELFARE EXPENS 60.00</b>
Please suggest
Thanks & RegardsHi,
Go to OB41, select the posting key 80 and in the third tab "Other attributes" mention Reversal Posting key. Like you can observe for posting key 40, reversal key 50 would have been assigned.
Pl assign points, if helpful. -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
Value Misc. Allowance for the flexfield segment Expense Type does not exist
Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay SharmaCheck these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks -
" ID Generic for the flexfield segment Address Style does not exist"
"ID Generic for the flexfield segment Address Style does not exist in the Value set $Flex$DF_contexts"
Can some one help with this iRecruitment issue.Just enable the context for the other countries within the definition of the address flexfield. You should then get a drop down list of countries, select it and then the flexfield definition of the address will refresh according to your selection.
Check that the original definition of the address flexfield on the personalisation page includes all the other contexts.
Regards
Tim -
For object XABBELEGNR , number range interval does not exist OMJ6
Dear all
I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval does not exist OMJ6.
Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
regards
M.Chandra mohanhi
u just go to tcode omc1.
activate gr/gi slip for plant
then create number range group code and assign it to plant ,storage location and movenent type combination.
Then u can create the intervals thru OMJ6.
Hope it helps
rewrad if useful
Rohit -
my IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?
Hello miamat2017
You should see an option to skip that step and then sign out of it when looking in Settings. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G. -
For Object RV_BELEG, number range SD does not exist
Dear Gurus,
I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
'For Object RV_BELEG, number range SD does not exist'
I have checked my output types, they have been rightly assigned to the invoice forms.
OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
Please help.
Regards
ChristianThats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
Piotr. -
Wrong posting key in accounting entry for GR
Dear Experts,
We maintained sales tax at item condition in PO. System create accounting entry the moment we did GR via MIGO. We noticed that the wrong posting key for sales tax entry taking place.Below I stated the Sales Tax entry that currently exist for GR.
2320111100 50 PUR FG LE - STAX 417.10500- MYR GR
3330001610 40 OPGG - ACRL SAL TAX 417.10500 MYR GR
It suppose vise versa. It should beas stated below;
2320111100 40 PUR FG LE - STAX 417.10500 MYR GR
3330001610 50 OPGG - ACRL SAL TAX 417.10500- MYR GR
Can anyone tell me how may I set this in OBYC. I believe the posting key should change so that the accounting entry will correct but I dont know how to set this. Please assist me.
thanks.
rgds,
nanthaDear Experts,
Appreciate if you could brief more in details how may I set the correct posting key for request in OBYC. This is 1st time I'm going to do this changes. TQ.
rgds,
nantha -
I encounter this error using OSX version 10.8.2 running Parallels Desktop 8 For Mac (Build 8.0.18345 Revisiopn 820589, November 25, 2012) runing a MacBook Pro using a Thunderbolt Display.
The Thunderbolt Display Sound does not function when Parallels Deskop is runningcherholdt wrote:
I encounter this error using OSX version 10.8.2 running Parallels Desktop 8
Then you should probably post your question on the Parallels forums: http://forums.parallels.com -
How do I get a prompt for my new account when updating existing apps? I had used one of my sons account for most of the apps on my iPhone. I have since move up to a iPhone 4S and created my own account to use iCloud. But everytime I try to update the exiting apps I am prompted for a password to my sons account. I am logged on to iCloud with my new account at the same time.
It looks like the apps retain some kind of tag to the original account used during download.
Any help would be appreciated.Change the account in the iPhones settings
-
The error I am getting is on Visa open.
I found couple of knowledge base (KB) entries that talk about Visa error 1073807346. The best way to find knowledge bases (KB) is to goto ni.com >> Support >> Advanced Search (option 3) >> type in the keywords in the box "1073807346", you will get them.
Also refer, http://www.ni.com/support/labview/visa/default.htm. Hope this helps. -
Assignment field is not getting populated in KSB1 for posting key 50
Hi All,
We are uploading entries thru excel in SAP.
For posting key 50 assignment field is not getting populated in KSB1.
But for posting key 40 it is getting populated correctly.
All setting (FSG, posting key details) are same for both the keys.
No substitution defined in SAP.
There is no issue for FBL3N for both the posting keys, only issue with KSB1.
Any idea what could be the reason for this?
Thank you.
AkashKSB1 is CCtr report..
if it is revenue normally it will be treated as statistical posting in CCtr accounting- for the cost element when it is defined as revenue element.. - check Cost elements - whether it is Cost and cost reducing or revenue element--
possibility this can be one of the reason.
check and confirm -
Maintain acct determination (table T030B) for posting key IRX / IGX (M8395)
Dear Guru,
I am testing IS-Oil & Gas (Downstream) - Exchanges.
Created Exchange Agreement and Purchase Contract and Sales Contract, Purchase Contract and Sales Contract are assigned to the Exchange Contract.
A PO is created with reference to the Purchase Contract.
Upon post goods receipt in MIGO, encountered error message "Maintain account determination (table T030B) for posting key IRX (Message no. M8395)" that does not allow PGR to get through.
A call-off is created with reference to the Sales Contract.
Similarly, when PGI is performed in VL01N, encountered error message "Maintain account determination (table T030B) for posting key IGX (Message no. M8395)" that does not allow PGI to get through.
Checked in OBYC, there is no transaction key for IRX and IGX.
Please advise. Thank you.
Regards,
WLHi WL,
Please use transaction code O54E to maintain the required configuration.
I hope this helps you.
Thanks & Regards
Kalpesh Chavda
Maybe you are looking for
-
ORARRP doesn't print to a printer configured through TCP/IP.
Could any one using ORARRP pls. help ? I am pasting the TAR contents I opened with Oracle Support. Oracle Support doesn't support ORARRP. They referred me back to discussion forum. Thanks, RK Resolution History 22-MAY-02 19:25:05 GMT Can you easily r
-
Error on deploying a Web Service on 9iAS release 2
Hi, somebody could help me on deploying a Web Service on 9iAS release 2?, I have applied the UDDI patch through the orauddi.zip file downloaded from otn web site. But on the J2EE Web Service Deploying Wizard (OEM Web Site), at the Web Service configu
-
Deleting a Custom Automator Service
Hi Guys, So I was playing around with the new Services functionality it Automator. Seems I've been successful in creating a new item in every contextual menu for a file or folder called "New Text File". Problem is, I want to now delete it. See pictur
-
In Photoshop there is filter- render- clouds. Is there a Illustrator equivalent?
I know photoshop more than Illustrator. I often use filter->render->clouds. But in illustrator I could not find that option. Is there a way I can achieve the same result in Illustrator?
-
Is there such a thing as "fingerprint proof" screen protector?
Some screen guards are promoted as "fingerprint proof". Is it just a gimmick, or it truly works? Message was edited by: whyonearthIengravedMyIpad