Msg No IW464 - Fields Priorty Must Be filled
Hi friends,
I have created an PM order from a Maint. Plan .
Its in CRTD system status .Now in my order field " priorty " is mandatory .
While creating Plan there is no field to add Priorty .
So , to release it I have entered the "priorty " first and then saved in IW32 .
But while saving , its showing me info msg " Enter value in field Priorty " and not allowing me to save order .
But , I have already entered value in field Priorty .
In Technical info, I have found aout msg data :
Appl Area : IW
Msg No : 464
Main Prog : SAPLSHL2
What could be the reason. Please help
Regards
PM
Hi Shailendera ,
One more thing , the point you said above to check the integration between notification and order ,
I have checked there .
To create an automatic notification once the order is created , do we need to tick the checkbox "Notifctn" [next to notification type] ?
I am talking about the menu path :
PM & CS -> Maintenence and Service Orders - > Define Notification and order integration .
I have one doubt regarding this : we also assign notification types to orders .
How does those settings differ from integration settings ?
Edited by: PM_SAP87 on Jul 22, 2011 12:44 PM
Similar Messages
-
ABAP WD: Must-be-filled fields ??
Hi colleagues,
cProjects uses WD ABAP. Field controls by cPro allow to define some fields as MUST fields. But only a star is displayed, to indicate a MUST field.
Will WD ABAP provide some basis functionality to switch a field to MUST BE FILLED status with full check functionality ??
If not, what is the best-practice procedure to implement such solution in a customer project ??
Any help is welcome.
Regards,
JoergHello Joerg,
As you said some ui elements Web Dynpro provide a "state" attribute that can be set to required, which in turn adds a "*" to a corresponding label. This gives a user a hint that the application expects this field to be filled.
From the perspective of an application, there are two options to move forward if a user did not enter something in such a marked field:
(a) display an error message and enforce the user to enter the value by preventing further input to other fields and/or the execution of certain functionality such as saving.
(b) display an error message, but allow the user to continue with his/her work - possibly including the execution of certain actions such as saving.
Both options are supported by the Web Dynpro framework. It is up to the designer of an application to decide which functionality should be offered. Option (b) has some advantages since it allows for quick-save and thus allows an user to i.e. gather some missing data and to continue at a later time. Of course, in such a case the application needs to mark a document as having errors or not in order to prevent it from being used in followup business processes.
There are more reasons as well. One such a reason is that an application can never be sure from where it receives its input. It can be a user interface, it can be a web service, it can be anything - even different clients with different user interfaces are possible. Hence, it is a requirement that an application checks all input. This of course includes validating that mandatory fields have been filled. An application should never rely on a certain layer on top of it to do such a thing, because if this top layer was exchanged (e.g. ui -> web service), a user could create inconsistent data assuming that this other top layer does not provide such a built-in check. So even if Web Dynpro did it internally, the application would have to do it again. This would be a waste in terms of performance and thus, it is not done.
Best regards,
Thomas -
I have a form with 2 tables
I have here one button
I wanna put a code in this button that when I press this button check that all the fields must be fill
I use this code in when button press
declare
v_alert number;
begin
v_alert := Show_Alert('close'); --( do you want to close OK/Cancel)
IF v_alert=ALERT_BUTTON1 THEN
if :v_code is null or :v_name is null then
set_alert_property('close',alert_message_text,'Please Enter Vessel Code & Name');
v_alert := Show_Alert('close');
end;when i put vessel code and name and then again press button
this alert also show me??Moazam
Actual it is req.
I have 0ne form/document and I want to close this document, it means after close this doc / form we consider that now we can not enter any information and this document is competed.
thatswhy I check with button .. one button to close this doc.. when button press first check all form text that all the text are fill or not if not fill then show the alert or mesg ..
finally I correct this code ,, i have done this work. -
Mandatory field "Involved Person" must be filled
Dear Experts
In EHSM 5.0 while trying to create Report - Incident - Simplified, receiving error - Mandatory field "Involved Person" must be filled. I have check similar post on this and as per that EHHSSPIID is being maintained for internal number range.
This issue is triggering either I click "send" w/o entering data for who was injured or attempt to add details for injured person.
Regards
SantoshDear Sunil
Few OSS Notes(1526402,1534362,1581936) which are related to HR Integration & Reading person data from HRMS systems. Refer EHSM 4.0 Master Guide (Page No: 10) . These Notes Implementation is mandatory during Upgrade.
Balajee -
To Generate msg if mandatory field is not filled
Hi Experts,
I want to display msg if mandatory field is not filled , for that i called
CALL METHOD L_MESSAGE_MANAGER->REPORT_ATTRIBUTE_ERROR_MESSAGE
EXPORTING
MESSAGE_TEXT = ' PLEASE FILL ALL MANDATORY FIELD '
ELEMENT = ELEM_GENRAL
ATTRIBUTE_NAME = F_NAME
But i am getting error that F_NAME is not an attribute name but it is attribute name only
What i should do , Please HelpHi Neeraj,
Remove Required property of that inputfield make it NORMAL.
For example your input field is INPUT...
if input is initial.
* report message
CALL METHOD lo_message_manager->REPORT_ATTRIBUTE_ERROR_MESSAGE
EXPORTING
MESSAGE_TEXT = 'Pick Quantity Should not be 0... '
ELEMENT = wa_temp // element
ATTRIBUTE_NAME = 'PICK_QTY'. // Attribute name( name used in context )
endif.
If you not fill input it will raise error message by hilighting the input field.
Cheers,
Kris. -
Error while Creating new Position-Data fields have not been filled (no. 5A135)
Dear Consultants,
My client using SAP HCM form 2008, now they want to create new positions to the existing system,
To create new positions I am using T Code : PP03, while creating I am getting error "Date Fields have not been filled- Error Message No - 5A135", I want to create the positions valid from 01.04.2014. please do needful why this error is coming
Regards,
NareshHi,
It is mandatory to give the org unit to which the position is being associated with.
Give the org unit and try saving it.
Thanks,
Sriram -
In adobe camera raw, what metadata field needs to be filled in so that if an image is uploaded to facebook by a customer, your copyright/info shows up?
Facebook used to but now I believe it includes it. I also read that possible facebook adds metadata to images uploaded to albums but not wall posts. Regardless, what metadata field has to be filled in?
-
I have a user on Adobe Reader X. whenever they open a .pdf file, the form fields do not auto-fill until you click in the box. Is there a setting that can be changed to make the form open properly?
Sounds like the form fields were filled in on a Mac using Mac Preview. This cannot be fixed in Reader only Acrobat. Ask the person who filled in the form to redo their work in Adobe Reader.
-
Balancing field "Profit Center" not filled while doing F110
While posting document there is no error where as while clearing the document through F110 the error is shown as
"Balancing field Profit Center not filled " while doing F110.Hi,
There could be various reasons why this error would come.
1. Check the settings for the new GL.
2. In particular,Check the configuration for classify GL accounts for document splitting and classify document type for document splitting.Also check config for zero balance clearing account.
3. Analyse the error on which line item the PC is not being filled.
Thanks
Aravind -
Asynchr Calls: Partner Role and My Role must be filled in Partner Link dial
Asynchr Calls: Partner Role and My Role must be filled in Partner Link dialog ?
Is the statement true?
Can I leave for synchronous calls one of the role spec vacant?
AFAIK only in asynchronous calls both drop down values must be specified.
PeterThanks for fast reply,
Yes, I defined Partner Role and My Role,and also defined a port type for calling back the request.
I just don't know what's the endpoint address which my asynch web service should use to response to my BPEL process.
Is there anyway to find out what's the endpoint address which the BPEL processes receive the callback response from asynchronous services?
Can I get the address which BPEL engine uses to get the responsse from a called web service?
I guess it should be an obvious work but I'm really disappointed with that. -
WS14000109 N-Step limit, LastApproverName field in container not filled
Hi,
We are running BBPCRM40 SP8,
We are using WS14000109 workflow, when the approver reject the shopping cart the message in the task (TS10407972) starts by
&LASTAPPROVERNAME& has rejected
The problem is that field is not being filled out, I can't change the field because this task appears in other workflows.
Does anybody know how I can solve this?
thanks
Best regardscan suggest one workaround
In addition to yr current WF WS14000109,
also activate automatic approval WF.
For automatic WF engter the start condition as
the SC total value should be < 600 euro
and exclude this condition in WS14000109
means in start condition
SC total value should be > 600 euro
then below 600 euro SC will be auto approved.
BR
Dinesh -
Field Local Currency not filled
Hi
Field Local Currency not filled
Message no. /POSDW/CORE081
Diagnosis
Field Local Currency does not have a value (initial).
System Response
Current processing requires the field to be enriched within the master data checks.
Procedure for System Administration
Check Customizing for the master data checks.
Regards
Markhi
kindly implement SAP Note 19915 for Missing Customizing master data
You have to transfer the table entries in question manually.
there are two different procedures are possible:
1. Use a correction request to copy the relevant data
for example: in source: use Table view -> Transport to create a new
correction request (pushbutton "Create").
Select the entries you want to transport and use the "Add to corr."
button to add them to the correction and save.
In the target client, use CASE -> Tools -> Client copy -> Copy via
command file (TA SCC2) to perform the transport.
or
2. Use transaction OY19 (Customizing -> Tools -> Table compare)
to compare or replicate the respective tables.
regards
laksh -
Balancing field profit centre not filled
Hi all,
The transaction Iam trying to post in FI directly.
The entry I am posting is
Dr Cash 1000
Cr Sales 500 PC X
Cr Sales 500 PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the error. balancing field profit centre is not filled in line item 001.
Can some one please guide. I have assigned cash account with item category 04000 and the document type Iam using is with unspecified category.
Thanks
AravindHi Vineet,
Thanks for the reply. Let me summarise you what I have done.
1. Document splitting is active in the system.
2. Profit centre and segment scenarios are mandatory
3. Zero balancing clearing account has been defined.
4. Item category assigned to cash account is 04000.(Cash account)
5. Item category assigned to sales account is 30000(Revenue)
6. A new document has been created which is YV and is assigned with transaction variant 0000/0001.
7. Inheritance check box ticked in level of detail.
Please revert in case if further details are required.
Thanks
Aravind -
FI Posting Error Balancing field "Profit Center" not filled-Vendor acc
Dear All,
System has been Configured the emp. loan and insurance deduction to be posted to respective vendor accounts. while making the FI posting system is throwing error like "Balancing field "Profit Center" in line item 001 not filled".
We have 8 profit centers. emp. loan deductions to be posted in vendor acc. across all the profit center wise. Business Area and Cost Center has been maintained properly for all employees in IT 0027 & IT 0001.
Doc. type also has classified for doc. splitting(spro>GL acc(new)>Bus. Trans --> Doc. Split --> Classify doc. type for split.).
How this issue can be solved, kindly help us out.
Regards,
Param.Hi Murali,
You are correct,Standard SAP business transaction "0000" and variant "0001" - unspecified posting will not cater the above requirement.
Doc Type SA does not split. Either you can use "001" in front of SA doc type which I do not recomment, but else create a new Documnet type with 0001.
In standard configuration in many places SAP has used 0000 whcih does not split. You need to define new doc types as per your requirement and assign business transaction and variant to it as per business need.
Do let me know if it works.. else we can try something else..
Regards,
SAPFICO -
Field Local currency not filled : POSDM Error
Dear Experts,
When I am posting a POS transaction( in /n/posdw/mon0 ) in SAP BW and trying to process 0001 - Supply BW without Distribution (Collective Processing) its giving me error that ---Field local currency not maintained. I have checked all POS configurations .Kindly Suggest me if I am missing anything in BW side.
Thanks & Regards
RakeshDear Vikrant,
Thank you for your input. I have already loaded the master data.
But, with your suggestion I have checked the 0plant data in BI and found that Local currency is not maintained in the respective records. After maintaining the local currency manually , the error get resolved.
Kindly let me know, while pulling the Plant master from ERP to BI, why the local currency is not filled in the record. Suggest me to resolve this.
Thanks & regards
Rakesh
Maybe you are looking for
-
My headphone jack no longer works. I was hoping that maybe someone could recommend a product that can connect through the dock connecter, but still be portable. and ideas?
-
Had to reinstall Firefox on new drive with new install of Windows 7. Missing all of my profile settings.
-
How to get attribute from xml file
I managed to grab all the info from xml, except the "url" attribute in <image type="poster" url="" size="mid" .../>. Any ideas? import java.io.*; import java.util.ArrayList; import java.util.Iterator; import java.util.List; import java.net.*; import
-
Using Xcode 4 with Open Directory Users
We have a lab of iMacs (10.7.2) with Xcode 4.2 that are bound to an OD server (10.6.8). At the moment only a local admin user can build and run an iOS project in Xcode. I already changed the Primary Group for the OD users to Group ID: 204 (_developer
-
Hi While configuring POST INSTALLATION ACTIVITIES.I tried to open the "go.bat" and "configtool.bat " files to start the J2EE VISUAL ADMINISTRATION but getting an error shown in below: \usr\sap\PI7\DVEBMGS10\j2ee\admin>"C:\j2sdk1.4.2_16;\bin\java" -s