Msg No SG111
Dear All,
When iam creating a PO for Standard,cost centre(Acct *** cat). I have given the PR #, Net Price etc etc. When clicking create it's showing one error as:
No Conversion factors are maintained for the currency pair or there is no valid entry for 20.04.2007.
Vineeth.
Hello Vineeth,
When you create the PO in foreign currency at that time system checks whether exchange rate is available in excahnge rate table for given period, if not then it will give the error for conversion.
Maintain the exchange rate in OB08 transaction.
Hope this helps
Regards
Arif Mansuri
Similar Messages
-
Photoshop CS2 (program error msg)... Help please!!
I have installed the full creative suite 2 on my new iMac. everything works fine except photoshop?!!?
Illustrator works great, In-Design works great, But when i try to open a file or create a new page in PS it tells me "Could not create document because of a program error"???? ***?
I had a previous version of CS and it worked fine for one day, then that started happening. I installed the CS2 trial version, and it would still give me the same error msg. I erased everything and installed the new CS2 (photoshop, illustrator , in-design and acrobat). It still gives me the same darn msg.???
Any help would be greatly appreciated!
thanksSee the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Itunes wont open and when re-installed received this msg: Service Apple mob device failed to start. You have insufficent privileges to start system svc. Help?
Download Itunes from Apple.com, not from within Itunes.
Redo the install, following the below procedure. However, when you re-install Itunes, right click and run the install as administrator. For Win 7, you have to hold down the cntrl and shift keys when you right click and then "run as administrator" will be an option.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Vista, Win 7 & later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes -
ITune wont start geting a error, error msg says send error or dont send.
Hi,
Like the topic says, i have tryed to reinstal itunes but with same results.
error msg
AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 00000000
what shuld i do next need it to work so i can use my ipod.let's first check to see whether or not that is associated with a broken QuickTime. (itunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?) -
How can I display my Mail lists and msgs. as usual??
I just lost the capability to show my inbox list or to click on a title to view the email content. When i open Mail there's the body of one msg the right, which I can't do anything with (the usual toolbar is missing); and when click on Inbox, Read Messages, or any icon to the left I just get the panel "No Message Selected". I finally found I could get the Inbox list by going to "Enter Full Screen", which lists the 685 emails in my Inbox, including 10 new ones. But I can't do anything with that list--when I open one it's in a panel not allowing me to reply, forward, etc. I can't scroll anywhere to see other items--if I close the full screen mode I'm back to a nonfunctioning left panel and one email with the body of an email randomly selected; again, if I select Inbox I get the panel 'No Message Selected". That's no surprise since I'm unable to show the Inbox list from which to select a msg. (except on that separate Ful Panel which shows only the list.)
This happened immediately after I installed the latest Java upgrade as advised by a popup. Could that have had ankything to do with this?
Will be very grateful for any help.OS X Mavericks installed?
Backup and Reinstall OS X.
Reinstall Mavericks
http://support.apple.com/kb/PH13871 -
Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA Ordering Address
VN Vendor
PI Invoice presented by
Any thread would be helpful .
regards,
chaitHi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait -
iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
What can i do when i purchase an app then after purchase the app fails to work. I deleted the app rebooted ipa then reinstated app. It still fails to work. I went to vendor support but when i go to send the info to them it comes up with unable to send msg due to page error. I am not happy. My child loved the app now it wont even open. Any help???
Try talking to iTunes support
http://www.apple.com/support/itunes/contact/ -
I bought today a new iPad from Rideau Store. The setup guys didn't update to latest software version. I tried to do myself trough iTunes, which notify me that an upgrade is available. After a while the upgrading process froze with a msg "unknown error ..". I clicked on the More info button and I got a page saying "due to a scheduled upgrade of Apple's support system some feature are not available.
The bottom line is that now the iTunes does detect the iPad being in recovering mode and asks to restore it to fabrics defaults. I tried to do this and again I got aqn "unknown error"
Finally I run the iTunes diagnostics to check the connectivity between my iPad and my HP laptop (iTunes). For unknown reson the iTunes does not detect my iPad. See below the diagnostics log:
Itunes Diagnostics
MicrosoftWindows XP Professional Service Pack 3 (Build 2600)
Hewlett-PackardPavilion dv5000 (EP416UA#ABA)
iTunes10.2.2.12
QuickTime 7.6.9
FairPlay1.11.17
AppleApplication Support 1.5.1
iPod UpdaterLibrary 10.0d2
CD Driver2.2.0.1
CD Driver DLL2.1.1.1
Apple MobileDevice 3.4.0.25
Apple MobileDevice Driver 1.55.0.0
Bonjour 2.0.5.0(214.3)
Gracenote SDK1.8.2.457
GracenoteMusicID 1.8.2.89
GracenoteSubmit 1.8.2.123
Gracenote DSP1.8.2.34
iTunes SerialNumber 0012AD0812DA2D38
Current user isan administrator.
The currentlocal date and time is 2011-04-20 20:32:27.
iTunes is notrunning in safe mode.
WebKitaccelerated compositing is enabled.
HDCP is notsupported.
Core Media issupported.
Video DisplayInformation
ATI MOBILITYRADEON Xpress 200 Series
**** ExternalPlug-ins Information ****
No externalplug-ins installed.
Genius ID:cb0eaa5cad8a753f64335065bc061263
**** DeviceConnectivity Tests ****
iPodService10.2.2.12 is currently running.
iTunesHelper10.2.2.12 is currently running.
Apple MobileDevice service 3.3.0.0 is currently running.
UniversalSerial Bus Controllers:
StandardEnhanced PCI to USB Host Controller. Device is working properly.
StandardOpenHCD USB Host Controller. Device isworking properly.
StandardOpenHCD USB Host Controller. Device isworking properly.
No FireWire(IEEE 1394) Host Controller found.
Most RecentDevices Not Currently Connected:
iPad runningfirmware version 4.3.1
Serial Number: DLXFK2A8DKPH
**** DeviceSync Tests ****
No iPod, iPhone, or iPad found.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also, do you remember what the error message said? -
hi
i need help in getting rid of this error msg 13019. it started after downloaded a couple of songs. and it will not allow me to sync my nano ipod thanksIve fixed this issue before. The steps are kinda long but they work.
This is for windows computers with iPod nano that get the error 13019 during or after a sync with iTunes.
-Open itunes
--click, edit, click preferences
--select advanced
---make a note of the iTunes media folder location on a notepad.
---put a check in organize files
---take the check out of copy files
---click ok
--Click file, at the top of iTunes
--move mouse over library, select organize, and consolidate files. ( This ensures all music in you iTunes will be in the iTunes media folder later.)
At this point, if you have playlists you want to save:
-Create a folder on your desktop, call it, playlists
--Hover you mouse over your playlist in iTunes, should be at the bottom of the blue/grey column on the left.
--right click the playlist, select export playlist
--Navigate to your desktop and open the playlist folder and save.
---Do this for each playlist you want to save
-Close itunes
-Click your start button, and open computer or my computer
--Using what you wrote down on your note pad, follow the path to the "iTunes folder", NOT the iTunes media folder
--Open the iTunes folder.
--Stop here
-You will see icons that look like folders and you will see icons that look like files-
-You will KEEP the FOLDERS
-You will DELETE the FILES
--If it makes you more comfortable you can cut the files out and paste on your desktop, but as of now we do not need the files any longer as we have the playlists backed up. Remember-Keep the folders.
--That was the magic--
-Disconnect your iPod if connected.
-When you open your iTunes, it will be empty, that is OK. We are recreating the library. Everything will come back in a few seconds.
-Click file at the top
--Select, add FOLDER to library, not to be confused with add file.
--In the window that pops up, locate and click on computer or my computer
--From here follow the path to the iTunes media folder on your note pad, but do not open the iTunes media folder.
--Click the iTunes music/media folder one time so it highlights.
--On the bottom right you will have option to select folder, or choose folder or OK. Hit that button.
All you music will start to import back into iTunes.
-Plug in iPod after completed
--a message pops up about being synced with a different library.
--Click erase and sync
--Watch all your songs go on your iPod with no error message.
From here you may sync your iPod the way you want with out worrying about the persnickety error 13019!!!!!
Hope this helps!!!
Julian
p.s. Follow the directions exactly.
p.s.s. To add your playlists back to iTunes:
-Click file at the top of the screen
--move your mouse over library, selecte import playlist
--on the new screen that pops up, navigate to your desktop
--open the playlist folder, select the first playlist, hit ok
--repeat for each playlist exported -
Error msg saying unknown error PLEASE HELP
Hi my iphone 4 died over night so i woke up this morning and put it on charge through a wall charger a few hours passed and i have got back and the little white bars are still circling so i pluged it into the computer and its still doing the same thing and a msg comes up saying itunes could not detect device unknown error OxE8000065. Please help i have very inportant phone calls this morning
thank you so so so so much that worked
-
Estilo Fonte padrão - nova MSG
Boa tarde
Pessoal, gostaria de alterar o estilo padrão da fonte (àquela caixa do lado esquerdo da fonte quando abrimos uma nova msg) de parágrafo para normal mas não consigo.
Já alterei tudo que se possa imaginar, entrei em aparência; edição; avançado. Mas não consigo alterar o estilo de Parágrafo para Normal. Toda vez que abro uma nova msg tenho que ficar alterando isso toda vez que vou escrever um texto pois o estilo é bem diferente.
Obrigado pela ajuda!!Eu fiz aquele procedimento, fechei a janela de composição de mensagem, e abri uma novamente e a opção já estava da forma que configurei.
Provavelmente o seu Thunderbird está com problemas na hora de salvar as preferências.
Alguns addons podem causar estes problemas, tente executar o Thunderbird em modo de segurança.
*[http://mzl.la/1k5DWjq Thunderbird em modo de segurança]
O arquivo que armazena as configurações do usuário pode estar corrompido.
# Abra o Thunderbird.
# Vá em '''Ajuda''' >> '''Dados para suporte''' .
# Clique no botão '''Abrir pasta'''.
# Feche o Thunderbird.
# Na janela que abriu, procure o arquivo '''prefs.js''' e delete ou renomeie este arquivo.
# Reinicie o Thunderbird.
Você pode tentar criar um novo perfil.
*[http://mzl.la/1ml3Fmj Usando vários perfis] -
Unable to Capture more than 5 mins, error out of mem msg when rendering
Somebody help me. I have been using my powermac fcp and a mini dv cam for 4yrs no problems. Now when i am trying to capture clips over 5 mins (1 gig) fcp freezes. So Im capturing through Imovie (which is working fine). Dragging clips into fcp to edit. Now when it comes to rendering anything over 5 mins Im getting an error out of memory msg.
Can anyone help me?You don't say what version of FCP you are using but my guess is you've upgraded QT7 and are running FCP4.5
If that's the case, do a search here for the solution(s). They're ugly.
good luck,
x -
Had this error msg in my application log:
Had this error msg in my application log:
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: REQ-012: thread add
[21/Feb/2002 10:16:20:7] info: ENGINE-ready: ready: 10820
BASEURL: https://ssunp03.company.com:8081
strURL: https://ssunp03.company.com:8081/cgi-bin/gx.cgi/AppLogic+EventServerManager
EventServerHttpInvocation > java.net.MalformedURLException: unknown protocol: https
**Out of memory, exiting**
ld.so.1: /pimcreg5/imc/nas/40sp3/nas/usr/java/bin/sparc/native_threads/jre: fatal: /pimcreg5/imc/nas/40sp3/nas/us
r/java/lib/sparc/native_threads/libjava.so: mprotect failed: Resource temporarily unavailable
Killed
Connected to LDAP server on ssunp03.company.com port 1390
[21/Feb/2002 02:42:49:1] info: ENGINE-class_loader_created: New class loader com.kivasoft.engine.EngineClassLoade
rNonVersionable@1c14d67f has just been created
Can anyone share with me his experience about ld.so.1?? What is it and why does it cause my apps server to reboot?It looks like you might simply have run out of memory. It just looks like the JRE tried to adjust its memory map and run out space. When mprotect fails the problem probably isn't with the .so itself.
What are the memory characteristics of your machine? Including the heap and stack space that you allocate for your JVM, as well as the actual physical and swap space available on the server. -
Diff b/w msg mapping and interface mapping
hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How To Handle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How To Handle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful
Maybe you are looking for
-
In SD point of view , that r things we can check in Screen MD04
In SD point of view , that r things we can check in Screen MD04 Key areas and feilds in MD04 to look after for SD and PP integration and respective roles of consultants.
-
Form 16A Changes in TDS Form Adding Box
HI All, Earlier the form was working fine. My requirement is to add Box i.e. the form didnt have the table.I am adding table like boxes to it. I am trying to add Box for the form J_1IEWT_CERT(Sapscript). I added a box in SE71. After Savi
-
ICal file download, but can't import
I can't seem to find this situation in these forums, so if it's been answered, pardon me. Okay, so I've been on with a website IT rep for two days and we can't figure the problem, so I'll throw it out here. I am an ice hockey official and our schedu
-
BADI after changing the User name
Dear All, We have the scenario of Contact person and Interner User as in B2B. I have a scenario wherein if the user changes the username /UserAlias the contact person would get an email notification. Please help. Thanks MP
-
Cannot download software - Download error. Please retry to try again or contact customer support.