Msgs are going to holding status

Hi All,
I have scenario from 1 file to 2 files(1 input & 2 outputs), but for some messages, 1 output is successful and other one is showing "waiting"status in message monitoring. For my scenarion QOS is EOIO.
There is no error msg in the queue for this interface. I tried to cancel or resend those messages, but I got the error - "Unable to cancel 1 of 1 messages; update the status" whn try to cancel &  "Unable to schedule 1 of 1 messages for processing; update the status" whn try to resend.
I want to make these msgs either cancel or successful, otherwise if I send any msg for the same interface that is going to "holding" status.
Any help on this will be appreciated greatly.
Thanx,
Kumar.

Hi Guys,
Thanx all for ur replies.
I cleared all queues frm smq2 and then processed but still msgs are going to same status and showing the queues again in smq2.
These queues are getting processed if i select the queue and click on active and then refresh.
Everytime we cann't do this.
Could anyone tell me wht could be problem?
Thanx,
Kumar

Similar Messages

  • How to STOP messages going into HOLD status very frequently

    I'm facing a problem in our Testing Environment where many messages are going to HOLD Status and also there are no messages in the System Error state.
    We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
    But this is a very very time consuming process.
    So can you please let me know if there is any solution to fix this prolem.
    Thanks,
    Pruthvi

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
    Go the the above
    Sign in. Go to the left side where it says phone numbers. Delete your number. Then save.
    Your iPhone friends will now get the red exclamation point that the message didn't deliver instead of it sending. Then your iPhone friend will force the message to go through as a text by long pressing the message and choosing send as text. Once tthey do that once you're set and all other messages will automatically send as texts for them to you. You just have to hope your iPhone friends realize to force the messages through as texts the first time around  but even if they don't at least they know they aren't reaching you and you aren't ignoring them.
    Does that help?

  • Messages in HOLDING status in AE

    Hi All,
    We have an issue with JDBC receiver EOIO messages, with messages going into HOLD status in AE , its a DEV environment :
    1) We have tried checking for failed messages before these messages we donot have any failed messages before these messages  just messages in HOLD..
    2) we are not able to delete or cancel these messages , we get a message cannot delete the message ,
    3) The message is doing a INSERT update to JDBC , JDBC connection is fine.

    Hi Kiran,
    Please let me know if your problem is fixed.
    I'm also facing the same problem in our Testing system where many messages are going to HOLD Status and also there are no messages in the System  Error state.
    We are trying to resend all the messages in every "Conversation ID". After this some messages gets successful and some will go into  Waiting status. We then cancel the messages in waiting status and resend all the messages in HOLD status and the process continues till all the messages in HOLD status in every Coversation ID were cleared.
    But this is a very very time consuming process.
    So can you please let me know if there is any solution for this prolem.
    Thanks,
    Pruthvi

  • WPs are in On Hold RFC status

    Dear all,
    In SM50, very often I see the WPs in On Hold status and RFC as reason. For DIA WPs, the status changes after I refresh. But for SPO WPs, that status stayslonger.
    a.) May I know what is this On Hold RFC status about ?
    b.) Will this pose performance problem to the system ?
    c.) Is there anything I can check or change to improve it ?
    Your comment and advice will be appreciated.
    Thanks.
    Regards,
    Kent

    Dear Kent,
    1. In general ON Hold status of the workprocess is that during processing if RFC calls or waits for another RFC  or some process is supposed to get complete,those cases staus will be in on hold.This is only an example,there can be many reason for on hold status of the Wp.More details can be obtained in Wp trace files.
    2.Sometimes it leads to performace problems,especially if there are more wp's are in on hold status results in the bottlenecks of the availablity of wp's, as a result transactions that were running or if new users got logged in are effected.
    3.Check the trace files of the work process in SM50 and also from where these RFC's got initiated.If possible check dev_rfc<wp no> files in work directory for more details.
    Best Regards,
    Shyam Dontamsetty

  • CUPM Order On Hold Status

    Hi,
      On CUPM, after a order is aborted by selecting "Abort Remainder of Order", it goes into HOLD status.
      Is there anyway to delete the order from the system instead of it being in the HOLD status?
      This system is running on CUPM ver 2.1.
    Regards
    Daniel

    Hi brockelliott80,
    I am happy to help you with this. There are several possibilities, but to know the exact reason that applies to you, please contact phone support and they can pull up the status of your repair.
    You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions
    click here
    Regards,
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Invoices matched to the same line on the same PO going on Hold

    Hi,
    We have started to setup some of our suppliers to use iSupplier, to automate the process of shipping and invoicing. With some suppliers, once they create the ASBN/Invoice the goods may take up to 30 days for delivery. Invoice are being automatically imported into AP to be matched to the same open PO (same line and item). When Invoice validation runs (nightly), these Invoices are going on hold as at any point in time we may not have received the total goods for which we are invoicing, even though we may have received the total matching to the first invoice. This is intended functionality that tolerance level checks are only made at the PO Shipment level and not at the Distribution level. However, the intention of introducing iSupplier was to automate the invoicing process does anyone know if there's a way of avoiding having this invoices go on hold ?
    Thanks,
    Regina.

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

  • Messages in HOLDing status

    Hi Gurus,
    I have a problem with messages in XI. Some of them are in a HOLD status, some work fine. There is no reason why they should be in a HOLD status. I've checked SMQ1, SMQ2 - all clear.
    Is there I can do
    a, process these messages (they are now in AE waiting to be written in target file)
    b, to avoid this HOLD status in future
    Thank you,
    Olian

    Hi,
    In RWB -
    > Message Monitoring.
    Check the interface here and see what is the cause of HOLD.
    if you are using FCC in you CC then may be one/more fields having problem due to incorrect data.
    Also chekc RWB -
    > Component Monitoring (look at receiving CC)
    Regards,
    Sarvesh

  • Alert for XI messages in a Holding status

    Is there a way to trigger an alert in XI 3.0 sp20 for messages that are in a holding status. Right now I am manually checking using the RWB but I would like to trigger an alert if messages are holding for an extended period of time. I have setup Email alerts for messages that have an error status but I can't seem to find out how to setup for messages that are holding.

    You can either configure CCMS alerts or using ALRTCATDEF. YOu can refer to the below links.
    CCMS:
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    Michal's blog-ALRTCATDEF:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Other help:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8fe69590-0201-0010-8097-c8a2ca60d5df
    Venkat.

  • Can some one tell me how to get this imessage (i think thats what it is they are in blue) off my flippin phone because they are going to other ppl as well as ppl intended and i keep recieving msgs from randoms grrr please help

    i recently went from a iphone 3 to a 4 and when i send messages they are going to other ppl as well as the ppl they are intended for this did happen once with the iphone 3 but now its all the time i have been in settings but it's not high lighted so dont know how to get the **** thing off so i can just send normal msgs, please advise 

    i didnt have any on but i disabled it then enabled lol dunno how but i have done it i think thanks for your help there is tooooo many settings on the phone for me i was ok with the 3GS just flicking through settings again and my face time as dissapeared lol any ideas

  • I have had apple products since day dot and why since steve jobs died does it feel like apple are going to ****!is it cos the big corporations have got hold of it and its price over passion

    I have had apple products since day dot and why since steve jobs died does it feel like apple are going to ****!is it cos the big corporations have got hold of it and its price over passion

    thankyou. THANK you.
    thankyouthankyouthankyou!
    sorry about no screenie but the first option worked (at least so far!)
    THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

  • How do I post an Invoice with 'on hold' status using this BAPI?

    Hey everyone,
    Okay, I'm working on an interface that will take Incoming Invoice information we receive from vendors and post it into the SAP system.  I'm still relatively new to ABAP, so it's a little slow-going for me...
    The BAPI is IncomingInvoice.  What we want to do is try to post the Incoming Invoice using the CreateFromData method.  That part, I'm clear on.  However, if there are any problems, the client wants us to post it with a status of 'on hold.'
    I'm been doing a lot of searching and a lot of BAPI documentation reading, but I'm not finding the answer.  I thought at first I could use the Change method, but it looks like I have to have an Invoice already out there in a particular status.  So if the CreateFromData somehow fails and doesn't really post an Invoice, then I think using the Change method is pointless.
    I thought the answer was to use the PreliminaryPostSingle method, as the documentation states that "enables you to post provisional invoice documents. Provisional invoice documents have the status 'on hold', 'on hold (from parking)', 'parked', 'parked as complete' or 'parked and released'."  But here's the kicker -- it expects IMPORT parameters of the INVOICEDOCNUMBER and FISCALYEAR.  But I don't have those yet, right?  Why does the method tell me it can post documents with this kind of status, but it expects me to provide key fields to an Invoice that doesn't yet exist, doesn't have a field that lets me set the status, and only returns the standard "return" table?
    I'm pulling my hair out on this one, guys.  I'm really hoping someone out there can help out.  As always, helpful posts will be duly rewarded with points.  Thanks everyone!

    Vyerah, sorry for the delay in the reply, but we only recently decided how to approach this.  Due to further discussions about the criteria, it was decided that we wouldn't worry about the "on hold" -- if we try to post an Incoming Invoice and it fails, then it'll be reported as such in an output file.
    Certainly made my life easier, as I thought I was going to have to clone the BAPI and try to get it so that it posted with an "on hold" status.  I'm very, very surprised to see that, apparently, SAP doesn't provide a function or BAPI to allow you to post an Invoice as "on hold."  Oh well.
    Anyway, I wanted to give you the update.  Thanks again!

  • Print jobs goes to HOLD mode in IBM system i when printing from SAP NW 7.0

    Hi friends,
       Whenever I send the jobs from SAP environment(NW 7.0) to the IBM printers on the network.  The jobs acts like it's going to print  but then goes to HOLD mode.
    I have changing the FORMS TYPE but that didn't help nor trying to releasing them again.
    We are running SAP NW 7.0 in IBM system i V5R4 and using
    IBM infoprt1580 printers.
    HELP !     Any tips are well apprieciated !
    Thanks.
    F. Y.

    Hi Frank,
    assuming that the spooled file goes into "hold" in the output queue on i5/OS (not in the SAP spooling system), I would suggest that you check the settings in the reply list and spool job for message CPA3394 "Load form type '...' device ... writer ... .". When this message is sent, the default reply is 'H' (= hold), but you probably want to reply 'I' (= ignore). You can use the command ADDRPYLE (or WRKRPYLE) to add an automatic reply of 'I' to this message. Make sure that job description QGPL/QSPLPRTW is set to INQMSGRPY(*SYSRPYL).
    If this does not help, another message than CPA3394 might cause the problem. You need to check the QSYSOPR message queue and the joblog of the writer job to find out which message is causing the hold status.
    Kind regards,
    Christian Bartels.

  • Confirm Account Holder Status Frustration

    Hi,
    After upgrading my broadband package 4 or 5 weeks ago, I've been unable to confirm my account holder status, it always says "Sorry, something has gone wrong. Please try again later." . I have tried creating a new BTID as suggested elsewhere on this forum with the same BT account, but this has the exact same error.
    I have now spent the last 4 weeks repeatedly going round in circles talking to BT Customer Support on the phone and this seems to be going nowhere, they promise to call back and never do. Is there any way to escalate this issue and just get it fixed?
    Thanks in advance,
     Brian

    Hi dlp-usb232, 
    Welcome to the forum and thanks for posting! 
    I will help get this sorted for you. 
    Click on my username and under the "about me" section you will the link to get in touch with us.  Whenever we receive your details we will go from there. 
    Cheers,
    Olgac 
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

    update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Message got struck in hold status in message monitoring.

    Hi SDNers,
                 I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
                 After repetetive attempts of restarting the message, still it is in hold status.
                 Even if I tried to cancel the message, it is not cancelling as it is in hold status.
                Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
    Regards,
    Jayaram.G

    Hi,
    If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
    Check queue status
    Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
    Check the status of the scheduler and the status of the XBQ* and XBT* queues:
    u25CF     Inbound qQueues
    XBTI* (ExactlyOnce)
    XBQI* (ExactlyOnceInOrder)
    u25CF     Outbound queues
    XBTO* (ExactlyOnce)
    XBQO* (ExactlyOnceInOrder)
    u25CF     Acknowledgment queues
    XBTB* (ExactlyOnce)
    XBQB* (ExactlyOnceInOrder)
    u25CF     Large message queue
    XBTL* (ExactlyOnce)
    If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
    If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

Maybe you are looking for