MSGTAG Software not working with K8N Neo LAN Port

Greetings All,
I'm having a problem using a message receipt service called MSGTAG (http://www.msgtag.com) It works with Microsoft Outlook and while it still uses Port 25 for the SMTP server, it also creates Port number 7362 to "listen" for when the recipient opens the e-mail and sends a receipt back to the originator.  This service will not get past the LAN port on the K8N Neo Platinum board.  Outlook just hangs until an error message pops up saying a connection to the smtp server was interrupted.  I thought it might be the nVIDIA firewall software, so after opening up to correct ports, it still won't work.  I then uninstalled the firewall all togther, but still no luck.
I'm running all the latest MSI and nVIDIA drivers.
I should note  that as soon as I enable my PCI NIC and use that, everything is fine.
Anyone have a suggestion?  MSGTAG tech support wasn't much help.
Much appreciated.

Looks like I finally figured it out.  In the nVIDIA ForceWare interface under Ethernet Settings---->Advanced Configuration--->Checksum Offload, uncheck the box that says "TCP Transmit Checksum Offload" and hit "Apply" and now it works!
I have the overall Firewall set to "High" profile, and now the only two websites that don't come up at all are http://www.extremetech.com and http://www.netflix.com .  I've seen postings in here before about Netflix.  Does anyone has an easy answer as to what source code these two websites have in common that would make this firewall block them?
The only firewall setting I can find so far that allows them to load is "Off".  I could drop it each time I guess, but there has to be another way.
Thanks for any help you can give!

Similar Messages

  • HP Scan 3 software not working with MacOS 10.9 Mavericks

    I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks.  Now my HP Scan 3 software does not work and there is no update for this software that I can find.  Can anyone help getting updated HP scanning software to use with Mavericks.  Thank you.

    Thanks for your reply.  I tried what you suggestsed and it did not work.  My printer was listed.  The website says it is for MacOS 10.8 and Mavericks is 10.9.  My printer prints fine.  The problem is with the HP Scan 3 software.  When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS.  Also, I went to the firm ware updater in my HP utilities folder and trie to run that.  I got a message saying that there is no update for my device.
    It is hard to believe that HP has not updated the scan software to work with Mavericks.

  • Apple USB keyboard does not work with one internal usb port

    Hi everyone,
    hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
    Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
    After searching the web on such problem, I tries a few things such as:
    I tried the keyboard on another computer (windows): works fine
    I tried usb stick and external DVD reading on the left internal usb ports: works fine
    I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
    I tried the SMC and PRAM reset : nothing
    Any idea ??
    Thanks
    Guillaume

    I'm facing the same problem, found any solutions ?

  • NX6800 not working on K8N Neo

    I have a problem with my MSI NX6800 VGA / K8N Neo Platinum mobo. The card emits a long buzzing sound immediately after a start up and the sound does not stop. After the computer posts and starts to load up windows, the monitor goes black and the buzzing sound continues.
    The card works perfectly on other computers, it just does not work on my K8N Neo Platinum mobo. Other VGAs work fine on my mobo. I am not sure whether this is a problem of the VGA or the mobo.
    In addition, the card worked on the mobo without any problems in my old box. After I got a new box and reassembled the system, the card stopped working, but the system works with any other card. At the time of reassembly I also tried to mount a new cooler on the card, however, due to the problems I remounted the original cooler and the card appears to work just fine in other computers.
    The other systems which worked with the VGA had much weaker PSU, so I assume the power is not the problem in my case.
    Any ideas what could be the problem?  
    thx
    pepe
    MSI K8N Neo Platinum
    MSI GeForce NX 6800-TD128
    AMD Athlon 64 3200+
    2x ADATA DDR 400 512MB
    MAXTOR 160GB HDD + MAXTOR 80GB HDD
    LG GSA-4081B DVD-RW
    Yesico FL-420ATX +3.3V 25A/+5V 35A/+12V 18A

    Ok, I did several testings during the last hours.
    The first thing that suprised me was, that the NX6800LE was suddenly working in the computer with the weaker PSU I tried. Nevertheless the buzzing in the other machine (with 420W PSU) still started when putting the power plug in and still stopped when powering up the system and powering it down afterwards.
    What I tried was to connect two older spare PSUs I still had to this system.
    First, it was an Enermax with 350W. No problem, no buzzing! The second one was an ancient 250W Noname PSU. Still, no buzzing sound when I plugged in the cable! It even ran some benchmarks - rock stable.
    It really seems that the problem is related to my specific PSU. I understand that there is some kind of current flow even when the system is not powered on. I suppose that the buzzer not only starts when there is too less power, but also if there is power "out of threshold".
    In my case it would mean that there is a leakage current in the powered off state that is interpretated as "not enough power when computer is switched on".
    In your case it would not necessarily mean that there is a lack of power - it could also be that one rail, e.g. +3.3V, is out of range (even too much!) or slightly defective/unstable.
    I suppose that the 6800er series is extremely picky about the power it gets.
    Ok, lots of assumptions, so we could really need a MSI-technician that tells us some more details about the buzzer....
    I am still not sure what I should do now - RMA the NX6800LE or the power supply?! The latter could be quite difficult to RMA. It just does not work properly with this specific graphics card...

  • Apple scanner software not working with HP

    HP claims that the Apple Scanner Software on PowerBook is not working properly with the HP scanner

    Is this a question about the scanning software in the MacBook Pro computer shown
    in your post's lower boundary area, or do you have a PowerPC G4 PowerBook, too?
    There may be a newer or alternative driver for a recent version of OS X, that the
    older obsoleted PowerBook can't run; but a later supported MacBook Pro, can.
    Issues with Apple products, software or hardware that may elicit comment,
    can be addressed to Apple Feedback... in case you want to tell them direct.
    Mac OS X - Feedback
    If you have posted in the vintage/obsolete PowerBook notebook ASC discussion,
    by accident, Hosts could relocate this thread to one more appropriate, on request.
    You may have to look into alternative drivers or software for scanners, if whatever
    Mac you are using with the HP scanner is unsuitable. The older PPC based Macs
    can't run an OS X version past Leopard 10.5.8. With a later MacBook Pro running
    Mavericks OS X 10.9.4, you may have difficulty if HP does not support it...
    Drivers for current printers & some scanners may be included in Mavericks; but
    for users of older printer/scanner/copier all-in-ones, bits may be left behind. If
    the HP product is older, a different version HP scanner driver may work. There
    are a few open source drivers available, however I do not recollect the web site.
    Please make clear what version HP product, which Apple computer portable, and
    what OS X version, your discussion actually pertain to. Some users refer to a
    MacBook/Pro as a PowerBook; and for a time, a MacBook as an iBook. Oh well.
    {edited & re-posted -- after accidental reference to an unreleased software version}
    Good luck & happy computing!

  • Pc will not work with Airport Extreme LAN connection

    I have setup my Aiport Extreme Base Station and my Mac and phone work just fine with the setup. However, I connected a PC directly to one of the LAN ports on the back, and the PC doesn't see the network. Above the port the light is blinking green. Any thoughts? 

    Is the AirPort Extreme Base Station (AEBS) the only router in your current network configuration? That is, it is connected directly by Ethernet to your Broadband Internet modem? ... or to another router between the AEBS and the modem?
    When connected by Ethernet to the AEBS, can the PC "see" the Mac or vice-versa?

  • 6600GT not working with K8T neo-FIS2R

    I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago.
    Now the AGP port seems to be broken (not the actual slot). I have tried a 6800 Ultra and a 6600 GT (AGP version) GFX card in this slot. Both cards fail at the driver installation point. I have tried driver versions 66.93, 67.02 and 67.03. I also tried 3 versions of the via drivers 451, 453 and 455. Even tried XP with SP1 and SP2. The PC will sometimes BSOD, reset, won't boot into windows. The drivers sometimes install then other times they won't, etc. The problems only seem to be with the drivers for the GFX cards.
    The 6600 GT works as I have tried it in another MB without any problems.
    I know the memory works fine as I used memtest86+ for a couple of hours on the default settings without any errors and it works in another PC.
    The spec of the PC is:
    XP pro
    K8T NEO-FIS2R MB
    512MB corsair XMS at 2.5-3-7-3
    XFX 6600GT
    40gig HDD
    FDD
    Plextor CD writer
    DVD Rom
    PSU is a Q-tec 550W
    I know Q-tec PSUs are not up to much from what I have read elsewhere in this forum, but I have had it running in a similar system with the 6800 Ultra installed without any trouble (even with the above MB before it went faulty). I have also tried a 400W PSU, that came with the case. The Voltages on the 12V line are between 12.00 and 12.03 when using the Q-tec PSU.
    Has any body else had these problems with the 6600GT in the mentioned MB.
    Also, how can I check the serial number on the MB with the label on the box, as this MB that was returned to me looks to “clean” to be the one I sent away for repair.
    Thanks for any help

    Hey, I'm glad to see a post on the new Gforce 6600GT AGP card.  I just recently put together a brand new system (see my sig for specs).  System runs great.  The only thing I wanted to do was replace the video card, and after a great deal of anxiety I decided the Geforce 6600GT AGP was the best bang for the buck.
    Well I got home, installed the card and never get passed the bios screen.  (shows your processor, memory, memory siz), the screen u hit DEL to go into the bios.  
    The system doens't lock up, NUM LOCK can still be turned on and off, and CAPS can be turned of and on... but thats it.  Just sits on that screen.  I can't go into the bios either.
    what settings do I need to do prior to isntalling this card to get it to work.  
    Let me know if you all need anymore details to help me out.
    oh, I did reset my frequency to 10x200 (which is what I think the 3000+ is supposed to be at).

  • Satellite U200-161 Fingerprint software not working with IE7

    Seems like the fingerprint facility for registering passwords is no longer working once ie7 (final) is installed.
    Anyone else have this problem or is it just me?
    Thanks
    Nick

    Hi
    I have never ever used the Fingerprint utility but possibly you have to set the user settings in the finger print software management again.
    I think if you have updated the IE to version 7 so you have to refresh the settings in the Fingerprint utility.
    Im not sure if it will help you but you can try it and please give me a result.
    bye

  • HIS multi-view ii software not working with OS X Yosemite

    Hi all,
    I just installed OS X Yosemite on my MacBook Pro and now my external moniter is essentially non-functioning (the display is streaky and goes in and out). I'm pretty sure this is due to the driver for the external display (HIS mulitview ii connected to an HP Pavailion 20xi monitor) is not up to date. Unfortunately it doesn't look like HIS has released updated drivers and they're located in Hong Kong so I'm having a tough time getting through. Any suggestions for a possible workaround until the new drivers are released?

    Hi,
    The original CD is intended for older versions of the operating system, not for Yosemite.
    The software for your proiduct is available via Apple Software Update, simply plug the USB or connect the printer to your network.
    Next open System Preferences > Printers & Scanners and click the plus sign to add the printer.
    Once you are done, I would sugget running Software Update to ensure the drivers are fully up to date - from the Apple menu click on Software Update.
    Clcik the Store Menu and click on Reload Page, then be sure to install any listed HP or Apple update and you are good to go.
    If you need, you may find a more detailed instruction about installing the software below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c04469325&lc=en&cc=us&dlc=en
    Scanning can be done as listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My upgraded version of mail with Windstream will not work with Mozilla Firefox. Why? Works find with the old Classic but not the new version

    It switches to the Classic view but not the new view which I really like.... My laptop has Google Chrome and it has not problems with this new view of Windstream only with Mozilla Firefox 5, the other version never had any problems either...I had 3 and had no problems till I up graded....

    The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
    I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

  • Hello,  I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users.  Mail icon was accidently removed along with program.  Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

    Hello,  I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users. 
    About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user.  Oops.
    1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X. 
    2. I reloaded software from my user with original disks  (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS.  I am unable to load Mail.  Gives Yellow error message.    
    "  You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
    3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
    Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
    Ideas?
    MattDeeds

    Matt,
    I would download and run the 10.6.7 combo update.
    http://support.apple.com/kb/DL1361
    Regards,
    Captfred

  • Hp scanner software Scan 3 does not work with osx yosemite

    The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software? 

    Hello @ringie,
    Welcome to the HP forums.
    I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
    I would like to help.
    There is currently no updated software.
    Try the following work around.
    Scanning in OS X v10.10 Yosemite without HP Software
    Hope this helps get you scanning.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

    I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • MyDAQ fails Self-Test and will not work with any software

    I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
    Trying to self-test or reset the device in MAX gives these errors:
    -The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
    -There was a problem resetting the device. Error code: 80040383.
    It also gives this error when trying to use the Elvis Oscilloscope:
    -Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1 
    Possible reason(s):
    NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
    I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked  NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
    Attachments:
    ni_support.zip ‏341 KB

    Hi chaka123,
    I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
    To answer your questions:
    Does the Test Panels work at all?
    I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
    Have you tried to delete the device in MAX?
    Once again, I cannot because it shows up as Flash Firmware Updater.
    Which is the color of the icon on the left side of “myDAQ1”?
    It was green before the uninstall. Now it shows the USB symbol.
    I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device." 
    What folder can I manually point Device Manager to in order to load the correct driver?
    Attachments:
    devicemanager.PNG ‏40 KB

Maybe you are looking for