Msi 108m wireless PCI card, model PC60G-F. VER 1.0 S/N 07403500216

>>>> MSI 108m wireless PCI card, model PC60G-F. VER 1.0 S/N 07403500216>>>>>
Drivers needed please>>>>
Regards
theeflash1

http://www.msi-technology.de/index.php?func=downloaddetail&type=driver&maincat_no=131&prod_no=10019
>>Posting Guide<<

Similar Messages

MSI pc54g2 wireless pci card - unable to install drivers

I have just purchased a wireless pci card (MSI PC54G2) and the Billion 7402VGP and am now trying to install the two. My problem (so far) is with the pci card ...
I have followed the manufacturers install instructions but continue to get the following message each time the drivers try to install
"There was a problem installing this hardware
Network Installer
An error occurred during the installation of this divice
The data is not valid"
I've since searched the net for answers (no luck); gone to the MSI site and downloaded the latest software (still no luck); searched various forums and removed and reinstalled the card several times (again no luck).
The closest(?) I've come to anything is that some pci cards require pci slots with v2.2 not v2.1. The MSI details for this card does not say anything about this, however I'm running a P4 Intel D850MV board which from what I can find is V2.2.
Does anyone have any ideas that may help?
many thanks in anticipation

Hi:
In order for me to provide the drivers you need except for the two I posted for you, you will need to click on each device needing drivers and post the hardware ID for them.
If you do not know where to find the hardware ID, please use the guide at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...
Here are the drivers you need for the PCI Simple Comms Controller and the PCI device:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en...=

Need driver for pc60g-f 108m wireless pci card

Cannot find it anywhere, needed to format my hard drive. Have now installed XP Pro successfully but unable to install my MSI wireless card.
please help
regards
Vinziggy

Thanks for a quick response, the card is alive. I can now see all active connections, but when I select my home connection the machine does not promt me for network security key, just tries to connect and then gives me the message " Unable to connect to the network...."
any ideas?
regards
VinZiggy

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in m...

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in my computer in my room and my Dad has the router in his room. Hes connected but the wireless PCI card in my room says im connected to his router but i can't get on the internet?? i tryed the following.
1.Entering the IP address that listed on my computer (when i click the connection that says im connected and click the tab at the top to the right and press details and i put the Subnet Mask and IP adress in the spots avalible when i put up the linksys screen this when i did this it showed the connection working at the bottom right on my screen the little green connection on the computer but still can get on the internet, Befor i did all that i left all that blank and it said Limited or no connectivity)
2.My Dad put his IP adress in insted of the on on my computer but he left the DNS and Defalt Gateway Blank (Possible Problem let me know?)So is showed the connection at the bottom of my screen but still not internet. So my dad made a new connection called (Linksys) and had no Security on it and we connected to it but Guess what...No Internet
3.My dad's other connection Henry1 has security and in the phrase box i enter his Pharse number and it connected everything was looking good i clicked up the internet, at the bottom left on the internet screen said Detecting Proxy sever loaded a bit got me excited the BOOM!! No connection
4.I pressed START-RUN-typed CMD at command prompt typed ipconfig/all
this showed my IP and Subnet mask put those in for that in the linsys box provided Note: in the linksys PCI confige there are several options i have no idea on what to put there like the DNS and Defalt Gateway Subnet mask or IP adress Plesea tell me what to put here.
Please excuse my Spelling and typo's im sure there are plenty but im at the library and i gotta work fast.
and Please list all possible problems Note: i have no way of seeing my dads computer so im just guessing by what's on my computer so tell me what my dad might have done wrong also.
(Mod Note: Removed Email address.)
Message Edited by daikunzeon on 09-14-2007 07:12 AM

Okay... first off let me know which operating system are you using and model and version no. of the adapter?? if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G PCI adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know.

I have a wireless pci card

serial # BB72410230 and cannot find the drivers for it.
Can anyone help

Whats the model number of the Wireless PCI card. Logon to www.linksysbycisco.com/downloads and in the search type the Model number of your adapter and you will find the Drivers for your Adapter.

KT6 Ultra FISR wireless pci card problem

Hello,
I hope that someone can help me. I have been trying to get my new Zonet 802.11g wireless PCI card installed on my KT6 Ultra FISR. I bought two of the cards and it installed happily on my MSI KT4 Ultra running XP. When I put the other card into the KT6 it starts the New hardware wizard on XP but cannot install the drivers from the CD supplied.
I thought that maybe it was the card so I swapped them over to see if this could be the issue, but it installed on the KT4 but still an issue on the KT6!?? :(
I then decided to buy a new Hard disk and do a new boot so installed XP pro fresh, and I still have the same problem! I think that it can only be a hardware issue with the board. Can't be a problem with the OS.
Any ideas?
Regards,
Peter

Have done that, couldnt get it to boot at all for some time ???, now it will boot but does not show my Soundblaster Live!
What can I do to change this? Why would it not boot at all with the PCI slots either empty or in a different order?
Would love to get the sound working with the wireless..........
Can I make changes to the IRQ in the bios?
No issues with the power as I unplugged all of the hard disks and PCI etc prior to rule that out.
Thank you all for your time
Regards,
Pete

Can't get wireless PCI card to work

I bought a Sonnet wireless PCI card but we can't get it to work yet. Before I return it I wanted to check to make sure all the software was right.
The AirPort utility is v4.2. The extensions are:
Airport 3.4.7
Airport2 4.0
AirportFW 3.4.7
AirportFWAP 3.4.7
The system can see the card in the PCI slot (it didn't before upgrading the utility to 4.2, but the card doesn't detect any networks (and there are usually 3-4).
I'm running 10.3.9 on a G4 MDD 2003.
Thanks
Tom

Yes, it does have an external antenna.
http://www.sonnettech.com/product/aria_pci.html

Linksys wmp11_v4 wireless pci card finally working

It's a common cheap wireless pci card. I just got it working today so thought i would post it here in case anyone searches for wmp11.
Heres how i got it to work.
The _v4 pci cards use an inproconn chipset. I have it working perfectly with ndiswrapper and this driver ftp://ftp.linksys.com/pub/network/wmp11_v4_dr.zip
you have to ./configure && make && make install ndiswrapper from source!!! Then load all 3 inf files with 'ndiswrapper -i file.inf'
I added 'wlan0="dhcp"' to rc.conf and added ndiswrapper to the modules. instead of restarting, as root 'modprobe ndiswrapper'
lastly do 'ifconfig wlan0 up', after that either use the gtk wifi-radar or kwifimanager or read some man pages...
I'm stealing my neighbors wireless right now using this card..
Last edited by droog (2007-06-30 08:01:09)

The error you're getting means the card is having a hard time properly connecting to the signal of your router. This maybe a cause of interference or a distance problem. Since everything was working before, it's possible that a new interference in your environment is causing the problem or there's something wrong either with the router or the card.
Have you picked up other SSIDs on the card also showing a decent signal strength and using the same channel as yours? You may also upgrade the firmware of your router or update the driver of the card though.

Satellite Pro 2100: wireless PCI card

Installing a Broadcom wireless PCI card and need to know where the aerial leads are routed (screen or base) so that I can try and extend them one is short by 1cm - oh and do the colours black and white correspond with main and aux?

Thanks for the wiring designation. Yes, I see that Tosh keep things close to their chest re disassembly of their machines however, if any techs or repair engineers out there pass by these boards then just tell me whether I should be looking in the lid or the base. Taking the lappy apart will be a doddle and I have no warranty period to worry about but don't want to start in the wrong section. Cheers.

Does wireless pci card need antenna? - SP L10

Hi all,
I just installed a wireless pci card in my Sat Pro L10. No probems there, it found and installed it normally but I'm wondering if I need Antenna? I thought they would be already inside my unit but I couldn't see any. Please tell me if i need to purchase and connect these aswell.
Thanks

I have removed the cover and taken out the mini pci card. I've looked as far inside the unit as i can with a torch and I can't see any wires, cables ect anywhere? Do you have a direct Email addy or telephone number so I can contact Toshiba directly to find out if the L10 is normally fitted with antenna.
Thanks

Which Wireless PCI Card for Quartz g31

Hi ,
Ive recently tried to go from an external usb wifi adapter to a pci card based one for my Quartz G31 . Ive bought the dell truemobile 1300 WLAN Mini PC model and although it recognises it , it sits there saying not connected . Ive removed the external wifi driver software etc . Any ideas ?
Thanks

Quote
although it recognises it , it sits there saying not connected
You'll need to re-establish the connection to your wireless network.

Wireless PCI cards recommendations?

I have an aging G3 Beige MiniTower. I want to give it to a family whose house has a wireless setup.
What 802.11b PCI cards can be used in one of the PCI slots? A card needs to have a driver that supports Mac OS Jaguar.
The MiniTower has a combo FireWire/USB PCI card in it, but I do not think it is relevant to setting it up with the wireless network.
MacBook Pro 17-inch Mac OS X (10.4.7) G5 Dual 2GHz Tower (Sept. 2005)
MacBook Pro 17-inch Mac OS X (10.4.7) G5 Dual 2GHz Tower (Sept. 2005)

i have a linksys wireless-G USB network adapter with speed boost model number WUSB54GS that will not work with the airport software.
i think there is only a few that will work with a Mac that has a certain chipset. i have a USB to wifi g one with boost that wont work cause it don't use the right chipset that is compatible with the airport software. so its a hot and miss thing with those USB to wifi network adapters.
i forget which chipsets are and are-not compatible with the airport utility
yea you can use a USB stick . but it also depends if it has the proper chipset. plus it would help to look for saying if its compatible with Mac and what OS. normally if it dont say that its compatible with mac it will usually not work but some rare cases it does.
yea you might be able to use a wifi pci card . but you would also run into the same problems as above with the chipset not being compatible. and then if it was not working right in the Beige due to some freaky Beige PCI incompatibility thing.

Does Apple make a wireless pci card for the G5?

I have a new Airport Extreme base station, but my PowerMac G5 still has the old airport pci card. Does Apple make an "n" pci card that I can use to swap out my old wireless card?

No. Apple does not have an 802.11n solution for your PowerMac G5.

Kt400 ultra hanging when running wireless pci card with XP

I've tried installing two different wireless pci (802.11b) cards on my system. Windows usually hangs within 1 to 3 minutes. I've tried different pci slots, updating drivers, etc. No go. Can't find much on google, only thing I found was a possible conflict between wireless card and USB controllers.
Anybody have any ideas.
Thanks

Hi,
I've got the same issue with KT3 Ultra2 + XP2000, wireless NIC Netgear WG311.
Tried a lot of tuning, from Bios setting to driver options, but nothing worked.
I'm sure this is not related to PCI revision ( 2.1 or 2.2 ) because this is running
pretty fine on the same computer under Linux Mandrake 9.1
I tried every possible combination of PCI slot / driver / Bios setting ...!!!!
The problem now is that, in addition to having found not workaround, I still do not
know where the problem come from : VIA chipset, Netgear driver, AMi Bios, ....
Don't know if I should change the motherboard or the NIC, or just wait for ....???
Any suggestion will be welcome !!!!

Best supported Wireless PCI card?

I am most likely buying myself a new Wireless G card (I only have a B now) and router. I was wondering what is the best supported Wireless card in Linux. The one I have now gives me massive headaches, and only works under certain conditions.

Might as well consider buying N 802.11N hardware, and may be easier to get feedback from some users about that. There are so many 802.11G cards and routers that it is difficult to say it will work.
What works great for some people doesn't work so well for others. My guess is that most cards work well, search the forums for people with problems with wireless and stay away from those cards, the others ... it's a leap of faith. Besides I guess you can return it if it doesn't work as expected.

Msi 108m wireless PCI card, model PC60G-F. VER 1.0 S/N 07403500216

Similar Messages

Maybe you are looking for