Msi 270x 2gb BF4 edition , boost not working?

Hello ,
i own a msi 270x bf4 2gb edition , the card itself is nice and since i was helping a friend troubleshoot issues with his 280x (also msi) i was checking my own stats in cpuz and noticed that it always stays on 955mhz.
now on the website it says the following :
1030MHz Core (Boost Clock:1120MHz) (OC mode)
1030MHz Core (Boost Clock:1080MHz) (Gaming mode)
1030MHz Core (Boost Clock:1050MHz) (Silent mode)
- I can manually set the core to 1030 as max in afterburner and that works .
If i install the msi gamer app and run that , it does not matter if i hit quiet , gaming or oc the clock rate goes to 975 and not higher (+ the fans wont spin properly)
whats going on here , am i missing something or ?

checked the case, but the VGA freq. is fine,
this card is not suppose to have higher clock.
Quote
whats going on here , am i missing something or ?
i own a msi 270x bf4 2gb edition
this statement is the issue, ie: you have a different card that you thought.
you have R9 270 GAMING 2G BF4:
http://www.msi.com/product/vga/R9_270_GAMING_2G_BF4.html#overview
and not R9 270X GAMING 2G BF4:
http://www.msi.com/product/vga/R9_270X_GAMING_2G_BF4.html#overview

Similar Messages

  • I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    There are several possible causes for the Black Screen issue
    *1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    *2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    *3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    *4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    *5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Regards
    TD

  • My digital editions saying not working but I uninstalled and reinstalled and it is still not working, any ideas?

    My digital editions saying not working but I uninstalled and reinstalled and it is still not working, any ideas?

    Hi imtheozzman, check if your security software is the problem, see : [https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet ]
    thank you

  • External editing does not work in LR4 (??)

    external editing does not work in LR4 (updated from LR3 a few days ago)
    has anyone an idea to solve this problem?
    Thank you.
    Regards
    Priska

    priskaleutenegger wrote:
    no ..
    when I send the RAW Document for external editing (Elements 10) nothing happens at all ... zero :-(
    a friend of mine has the same problem - also updated from LR3 to LR4, external editor: elements 10
    Which process version is the image you're trying to edit externally? 
    You right-click (I'm assuming PC, can't help Macs), there should be a context menu option "Edit in".  You choose that, and there's an option for Elements 10 or not? 
    If so, what happens when you select it?  Do you get any further message?
    If not, you may have to go to Edit menu, preferences, External Editing tab and create a preset for Elements.  In the "Additional External Editor" area, click "Choose" and navigate to wherever Elements is on your machine and you can create a new external editor. 

  • Sharepoint 2013 list view quick edit does not work with out remote API permissions

    sharepoint 2013 list view quick edit does not work with out remote API permissions.
    When I give Use Remote Interfaces  -  Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N SLi Platinum Duall Channel not work? Please help

    Quote from: iggsy on 29-July-05, 06:03:49
    Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
    Mine does the same thing at the startup screen but not on cpuz...go figure.  Just my 2 cents.   

  • I975x PU Edition - Speedstep not working

    Hi guys,
    Just got this new setup and everything is fine apart from Speedstep never kicks in, its enabled in the BIOS (7.1) as well as C1E, and I have set the power management in Windows to "Minimal" and I leave it alone with no programs open for 5 minutes (0% cpu) and it does not downclock at all.
    At first I thought it was the Windows install, so I reformatted the disk (full format) and re-installed Windows XP + SP2 + All Updates. No joy.
    Spec:
    Intel Conroe E6600
    MSI i975x Plat PU Edition
    2Gb G-Skill PC6400 (@1.9v)
    400Gb Samsung SATAHD (on Intel SATA connection)
    nVidia GeForce 7900GS 256Mb (eVGA)
    Everything is at stock, I have reset the BIOS a few times now so no avail.
    Have I done something wrong?

    Hey,
    I ran the RMClock utility and you can see it swapping from 1600mhz to 2400mhz, it just does it really quickly and its not like AMD C'n'Q that I was used to, thats all.
    Try RMClock
    Dave

  • MSI 270x Gaming tf - one fan not always start

    Hi,
    i bought recently MSI 270x gaming and mine problem was high temperatures. I discovered that one of the fan doesnt work (it look like he had too less voltage to start). I touch him gently and he start work fine for few days (shut down pc for night). Sadly yesterday he wont start again on turn pc (it look like turn power up -> both fans start rotate few times, they stop and next they go on little higher rpm - this is moment when one of fans have troubles).
    Fan look really fine, doesnt have any resistance to rotate when you touch him, its look more like problem with control from voltage system.
    Its possible to change video card bios in way to give more power to fans on start (i think this will solve problem with not starting fan).
    Here is mine vbios h.ttp://www.filedropper.com/pitcairn

    There have been several issues reported about fans on this card model. Seems a batch of this are simply bad. Contact MSI about it or contact reseller for rma. >>How to contact MSI.<<

  • Edit link not working in IE 10 browser after fetching 5000+ rows

    Hi,
    OBIEE 11g 11.1.1.7.150120
    IE 10
    We have an issue where IE browser misbehaves after fetching 5000+ rows.  By misbehaves, I mean the browser responds extremely slow while scrolling up, down, left, right.  Worst behavior is the "Edit" link on the report does not work.  There is no action!  If I navigate to the my home page and try to edit some other report/analysis, same -- no action.  I am able to run other reports but cannot edit any one of them.  Edit link does not work for any report going forward.  If I log-out properly, close the browser window and log back in, only then am I able to edit reports.
    I tried clearing the browser cache several times but this keeps happening.
    This issue is specific to IE only, not Firefox or Chrome. However IE 10 is the corporate browser and switching to any other browser is not a solution.
    Has anybody faced this issue?  Any help in troubleshooting will be greatly appreciated.
    Thanks.

    Hi skull,
    Just to make it simpler ... don't start touching your settings for java heap memory or your account setting to define the default tab when editing an analysis as they have no link with your issue.
    Setting the criteria tab .... well ... as you can't click the edit link you will never get till the criteria tab, so it will not help you a lot (but it's good to set it in case you often edit huge analysis with tons of rows as it doesn't fire a query every time you open it).
    For the java heap memory I can't really see how Chrome or Firefox would behave in a different way on a server side setting like that one.
    So to avoid having multiple other nice issues later don't change settings around without being sure 100% it will have an impact on what you are debugging.

  • Edit button not working on a publishing site on sub-level pages only (SP 2010)

    When I create a top level page, the Edit button/edit page works fine with checkout and checkin.  However, once I create a sub-level page - that is I create a second page within the first page then the edit button does not work and there is a message
    displayed on the ribbon in yellow background: 
    Status:
    Published and visible to all readers 
    I have read all responses to similar posts and tried them but problem is not resolved. 
    I don't have workflow turned on, I don't have content approval, yet, issue is still there. 
    Please help. 

    Hi Wynnit,
    Pinning will not work in most devices - desktop only. To do the same in your device layouts you need to use the scroll motion tools.
    To add code to the <head> tags in Muse you go to your page properties and under the meta tab you will see a section you can paste your code.
    When  you do push live with Business Catalyst you will be given prompts as to how to go about it.

  • BB8830 World EDition - Verizon - Not working with VODAFONE SIM card

    Hi,
    I bought BB8830 world edition from US to India. It works fine with Airtel Network. But its not working With Vodafone SIM card.
    Option--security option-- Certificates-- Vodafone WLTS(x - red cross mark) is there. It expired on 2008.
    Please let me know any one to find out solution for this. whether I need to updated the BB OS or how it works with vodafone SIM..
    Please post the answer in [email protected]  also.
    Thanks in advance.

    If the phone is unlocked, then contact Vodafone.  They are the carrier you are trying to use, so only they can really help you.

  • Adobe Elements 9 Full edits do not work

    While editing photos in Elements 9 all of a sudden the Full Edit tab and also the Create tabs do not work, what went wrong and how do I get them to work?

    OK, open the Organizer, then click the icon for the Unwelcome Screen:
    Hold down your Ctrl+Alt+Shift keys while clicking on the "Edit" button:
    Keep the keys held down until the "loading" animation stops.  Then close all the PSE windows and you'll see the prompt for deletion window.
    Ken

  • Adobe digital editions will not work

    Digital editions 2.0 will downlaod books but will not allow me to transfer to my e-reader.  It does not show the e-reader in the left hand side as it should.  Also each time I use it it asks to authorise my computer.

    It is on Windows 8.
          From: shreya <[email protected]>
    To: Marilyn Kelly <[email protected]>
    Sent: Thursday, March 26, 2015 1:06 AM
    Subject:  I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
    I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
    created by shreya in Adobe Digital Editions - View the full discussionYou are facing this problem on Windows or Mac ? and which version? Please let us know. Thanks If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7351396#7351396 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7351396#7351396 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Adobe Elements 10 edit in not working

    Adobe Elements 10 Edit in not working

    It does nothing.  I click Edit in Photoshop Elements Editor and nothing happens.  I tried opening the Elements program to see if that made a difference and it did not.  I double checked my external editing preferences to make sure I had the Adobe Photoshop Elements Editor application selected and I do.    It use to work until I upgraded to LR4.  Now it no longer works.
    TORRI HOWARD
    Images By Torri Howard
    (425) 750-1703
    http://www.imagesbytorrihoward.com

  • Bridge CS3 "Edit Find" not working after optimizing cache.

    Power PC G5
    Mac OSX v.10.4.11
    3GB RAM
    Photoshop CS3
    After optimizing the cache, my Edit>Find feature does not work. I looked into the Bridge Preferences and could not find anything under Thumbnails or Cache that can turn it back on. Please advise.

    Make sure you have Bridge 2.1.1.9.
    Purge the cache for each folder through the Tools menu in Bridge.

Maybe you are looking for