MSI 270X Gaming troubles!(black screen on boot/Fan speed on max)

Hello. I bought a brand new videocard - MSI 270X Gaming. But I got troubles with the computer boot. I start the computer, i got the greenting sound of Windows 7(everything's work), but i don't have anything on the screen - pitch black! And the fan speed is max. That's it!!! In order to make it work, I'm suppose to unplug the card from the PCI-e slot and put in back in. When i do this, it work fine... until the next time I have to turn on my computer. Again the same story. Only removing and putting back the card in the PCI slot works. I updated my MB Bios to latest ver. - don't work. Clear CMOS - don't work.
To make sure the problem is in the card, not in the PC, i'v putted another videocard and it's working nice
So guys if you have any ideas how to make this card work fine, please tell me. My other option is to return it to the store!

Quote from: Svet on 17-December-13, 00:33:47
oki, have you tried to switch the card vbios to the other one and to see how it goes?
OK, didin't do that. If it not removing my warranty, tell me how to do it?! Please!

Similar Messages

  • R9 270X Gaming 2G Black Screen

    I have the same problem which many are having. msi r9 270x 2gb gaming OC, Black Screen after catalyst drivers intall. I have tried various drivers, including 14.7 RC1 beta drivers.
    First time i installed drivers provided on msi website (AMD_13101_78_vga), those worked fine until once i rebooted after 20 minutes. One thing i did was used the msi fast boot without using fast boot program installed in windows 8.1.
    Things i have done already:
    1. formatted pc many times
    2. used all the various versions of catalyst
    3. Cleared CMOS (removes battery for and hour, shorted for 10 seconds to reset)
    4. done bios flash with atiwinflash in windows with MSI.R9270X.2048.131129.rom 015.041.000.000.003348 (from techpowerup.com); one thing i noticed after using this rom that without catalyst drivers installed, i can see windows recognize that my gpu has 256mb memory which was before only showing 8mb before this bios update. but again after catalyst 14.4 this black screen came back again.
    My card serial number is - S/N: 602-v303-070B1404044342,
    Please provide me with the bios to use with this card and how to flash it again if atiwinflash is not advisable.
    Also tell me which catalyst drivers to use for stable system if not 14.4 or should i use provided on msi site 13.101
    And i am using an HDMI cable and even changing to dvi it does show black screen.
    Thank You.
    Help me i am completely frustated with this card.
    My Specs:
    Motherboard: Msi gaming 3 H97
    GPU: msi r9 270x 2gb OC
    CPU: intel core i5 4670K
    RAM: g skill 2x4gb 1600MHz cl9
    PSU: corsair vs550 watt
    Monitor: DellS2240L

    Quote from: trulymittal on 19-August-14, 23:18:05
    I already mentioned the vbios version i am on and that is 015.041.000.000.003348, since the card is not installing drivers and screen going black, how can i can save the vbios version for upload.
    ok i will try gpuz or nvflash and will upload if it doesnt help
    I flashed using 015.041.000.000.003348 this bios. and after flashing atiwinflash gave me a message:
    Old bios: (Nothing written here)
    New Bios: 015.041.000.000.003348
    All these numbers are 100% useless as these do not reperesent an MSI vbios version.
    Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
    4.) Be aware that gpu-z screenshots or what gpu-z reads out as bios version are NOT of any use for identifying the required vbios version. While it doesn't hurt to add those when S/N and an actual copy of the vbios are also supplied simply just adding screenshots or version readouts will not get you any further and us having to ask for the required informations. 
    As Svet already said we need the actual vbios.

  • MSI R9 270X Gaming 4G Black Screen of Death after driver install...

    So I recently updated the drivers and AMD catalyst to the newest version. After doing that and restarting my pc, it will load to the Windows loading screen, then to the black screen of death. When I restart under last known good configuration, I can start windows, but I don't have the drivers installed.  This is a fresh install, and no matter what I do, it ends in the same result. I've tried restoring the PC, and I can start windows again, but again. No drivers.  I can't find an older version of the drivers that worked before.  I'm just frustrated because I have 2 of the cards, and a quad display. But i can't use them...  After researching, I found that this is a common issue, But I can't seem to fix it.

    From your post in another thread I guess you tried 14.4 from MSI site. Use latest official AMD one (14.12) instead: http://support.amd.com/en-us/download/desktop?os=Windows%208.1%20-%2064

  • R9 280x TF GAMING: Sporadic black screen on boot and system resume

    Link to my full system specs
    ASRock Z97M OC Formula (running latest BIOS version)
    Acer B296CL Monitor over DisplayPort
    MSI R9 280x 3GB TF GAMING, vBIOS 015.042.000.000.003435, S/N 602-V277-250B1406048461
    AMD Catalyst Omega Driver: 14.501.1003.0 WHQL (latest non-beta driver)
    When booting my computer in UEFI mode, occasionally, my monitor does not wake from sleep and the screen remains black until Windows takes over and the login screen displays. This seems to usually occur after the computer has been powered off for more than 10 minutes. Sometimes this never happens, the screen remains black the whole time, and I need to hard reset. Sometimes it boots fine.
    This black screen / no signal issue also occurs far more frequently when attempting to resume from sleep. I strike a key on the keyboard or hit the power button while the computer is in sleep mode, the computer wakes up, but the monitor never turns on. This forces me to either hard shutdown or reset in order to restore graphics.
    In addition, I have a Razer keyboard that shuts off its backlight when the display is turned off, and it remains off when this problem occurs. This likely means that there is a problem with the card, drivers, or something else, rather than cabling. I might just RMA if we don't get anywhere here.
    Perhaps a good first step would be ensuring that my card is flashed with the latest vBIOS. Can you send a link to that?
    I'm also wondering if ULPS might be interfering, even though I am not in a CrossFireX setup.
    Other than this MAJOR issue, the card works fine when playing 3D games. Though, I had major issues with video artifacts when playing 2D games or doing anything else simple (web browsing, moving windows) because of the absolutely terrible decision to underclock the past couple generations of AMD cards so much that the GPU can't function. I solved this by modifying an OverDrive profile to raise the idle clock to 850 MHz, but not overclocking at all.
    Thank you.
    Meta discussion for the mods (feel free to PM me if you would like to discuss this further, in order to keep the discussion here on topic): sorry for not immediately opening up another forum topic when commenting on this issue. Every single other community that I've been a part of prefers to keep users with the same problem on the same thread. In my experience, mods yell at people for opening up duplicate bug reports and duplicate issues far more than they ask people to fragment information across multiple threads, therefore making it difficult to consolidate information.

    It could be a mobo issue, but all of the quirks seem to point to the card.
    I do not recall if I tested the card in another PC, but I no longer have a second desktop to test with.
    I do think I tested an NVIDIA card on a separate Windows install with this build though. No issues there if my memory serves correctly. I've been troubleshooting this issue for months, and I'm becoming tired of this stubborn problem, so the attempts at problem-solving are becoming blurred.
    vBIOS is attached.

  • MSI GT683 Black Screen and full fan speed at startup

    Hello!
    SO this morning i woke up and was about to start my lovely laptop.
    I pressed the on button and the screen remained black and the fan sped up slowly and slowly, after 10 sec it was at full throttle!
    Yesterday i got tired and put my laptop to "sleep mode" because I meant to use it later, but I fell asleep can something have happened by that?
    I have had this laptop for 3 months, never had a single problem. But now this :(
    And a really need my laptop for school now!
    When i bought it one 2GB ram module was changed to a 4BG so the total would be 8GB, and a 60GB SSD was installed on the second HDD slot.(Boots on 22 sec )
    I have played a few hours of COD MW3 but i have a coolermaster laptop cooling pad with 2 fans, so the laptop did not get so hot when i played.
    So please anyone help?
    (I´ve tried booting with only one ram installed and tried my ssd in my other laptop, both are fine.)

    I know this is an old topic but I just had the same issue and wanted to post my results in case anyone else was having this issue and stumbles on this thread. I was playing a game on my laptop, temperatures were well within the normal range, and suddenly the computer made a sort of "zap" noise and the screen went black. The computer also fell deathly silent but the power light (the shield) was still on. No indicator lights on the mouse pad and the orange lights around the screen had gone out. I had no choice but to do a hard shutdown. When I turned it back on, the screen remained black, the power light remained lit, but no other lights on the computer. The fan was on ultra speed in a way that I have never heard my fan run. I smelled the exhaust to see if I smelled burning but there wasn't any sign of that. Anyway, I let the computer rest, tried again the next day with the same result. I contacted my warranty company, started a claim, and waited for them to send me the box so I could ship my laptop to them. In the meantime, determined as I am  , I tried the laptop several more times in the next few days just to see if I would have any luck. Sometimes the fan would come on and sometimes the laptop would be ghostly quiet but otherwise everything else was the same. Same blackness, same nothingness. I immediately assumed this was a major malfunction, most likely the motherboard. When the warranty company took the information for the claim, they agreed that it sounded like the motherboard or possibly the hard drive.
    Three weeks later, my laptop is on its way back to me. I received word from the warranty company that the issue was the graphics card. This completely blew my mind as I wouldn't expect the graphics card to prevent the indicator lights from flashing, the  soft touch keys at the top of the keyboard, the lights on the sides of the screen, etc. They are the experts however, right? They said the video card malfunctioned. They replaced the video card and now the laptop is in working order. They are sending it back to me now and I should hopefully receive it in the next couple of days.
    Sorry for the looooooong response but I wanted to give as much info as possible because I couldn't really find anything when I was searching for this same issue. Hope it helps someone!

  • 970 GAMING black screen when boot on cold start, have to clear CMOS everytime

    I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
    I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
    PSU seasonic 430W, GPU HD7750.

    In what DIMM slots did you insert your memory?  I just got and at this moment building a new computer with a 970. 
    A horrible experience I had with my last build reminded me of it.  My board was am MSI A88XM-E45.  DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black.  When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
    Well it would not boot.  I reseated every component and for HOURS tried almost everything.  Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
    I think I will begin this build the same way.

  • MSI R9 270x OC edition black screen

    Hi all I've had the r9 270x for 3 months now and it ran like a champ. I ran Sims 4 the day it came out and worked for what seemed 30 mins and I come across a black screen.
    Boots up fine but at login screen I get the same black screen. I've gone as far as formatting my computer several times.
    I had it in PCI express 3.0 x16/x8 slot 1
    Here are my specs.
    Mobo:  Asus ROG Maximus V Extreme
    PSU: Antec HCG-900
    GPU: MSI Radeon r9 270x OC edition
    CPU: i7 3770k
    RAM: Corsair Vengeance 8gb x2
    Any type of help would be appreciated :(

    Does the computer work with the integrated GPU? Have you tested the vga in another machine or can you?

  • Black screen at boot MSI Z77A-G43 with HD7850

    Hi,
    I've tried everything You suggested in this topic. I've upgrade and downgrade bios (official 2.3, 2.4, 2.8, 2,9 / beta 256, 281,296) few times but still is black screen at boot. Now i'm on the newest beta bios 296 and still same issue on Sapphire HD 7850 with my Z77a-G43 board. I know for sure that sapphire working well because I've checked on other mobo with even worst PSU (400W instead 550W Volcano). Before hd 7850 I had gtx460 and swith those few times and always gtx460 works fine, so I don't understand anything right now.
    Tried different slots, also clear cmos.
    Board: MSI Z77A-G43
    Bios: Version 296
    VGA:   Sapphire HD7850 1GB
    PSU:   Modecom Volcano 550W
    Intel Core i5-3570k
    MEM: Kingston 4GB 1600MHz
    HDD: 2xSSD
    Without OC
    OS: Windows 7 64bit Professional
    Can You help me somehow, maybe I did not check something else?

    Quote from: The CPU Whisperer on 22-April-13, 16:06:05
    Do you see the same problem on bios 2.90?
    The Z77A-G43 seems the have difficulties accepting HD7xxx AMD VGA cards lately.
    It seems that the problem is gone. I thought of it being an ATI driver issue ~ but not even the latest didn't fix it. But since I flashed to BIOS 2.9 I haven't encountered the problem anymore. So I believe something is fixed between 2.3 to 2.9.
    However my problem was a bit different that the OP has.
    Oh, and I said this on other thread so I say it here too: MSI and Asus 7xxx cards haven't faced the kind of issues Sapphires are having. I'm so glad to my choice... as I almost picked Sapphire but then read comments on Newegg which weren't in favor for Sapphire.

  • Quad Channel RAM Black screen on boot

    So i can run my computer with Duo channel RAM DIMM slot 1 & 3, but if i add DIMM slot 5 & 7 my computer screen just stays black forever. the computer starts up and stays powered on, but no signal to screen. i have tried all 4 ram pieces alone in DIMM slot 1 and the computer boots just fine and it says 4gb ram in both BIOS and my computer properties. I have also tried just adding just one ram piece in DIMM slot 5 and the same problem occurs, just a black screen on boot.
    my specs are:
    MOBO:MSI X99S SLI PLUS, Socket-2011-3
    ATX, DDR4, 4xPCIe-x16, USB3.0, SLI/CFX, M.2
    CPU: Intel Core i7-5820K, Socket-LGA2011-3
    6-Core,3.3GHz,15MB,140W,22nm,28 PCIe lanes,Haswell
    RAM: HyperX Predator DDR4 2133MHz 16GB
    4x4GB, DDR4 Non-ECC CL13 DIMM (Kit of 4) XMP Preda
    GPU: MSI GeForce GTX 980 Gaming 4GB PhysX
    PSU: Cooler Master GX 750W PSU
    ATX 12V V2.31, 80 Plus Bronze, Standard, 4x 6+2pin
    I have Flashed the BIOS to 1.5, swapped around on the RAM pieces to no avail.

    Quote from: badboy2k on 24-December-14, 13:20:22
    some people are having problems with that board! (no idea what is going on with it)
    just for the sake of problem checking can you take out your CPU and look at the pins in the cpu socket with a bright light and a magnifier (check multiple angles) to see if any of the pins are bent?
    a few of the pins are indeed a little bent out of position, would it be best to return the board or should i be able to bend them back into the correct position?

  • Debug codes and black screen on boot

    I restarted my computer and the debug code on the motherboard says "99"
    I also get a black screen on boot up and it does not advance. In the bottom right of the screen is the same "99"
    What is the problem. Thanks in advance.
    I have the MSi Military Class II 990FXA-GD80

    Quote from: badboy2k on 21-August-12, 11:35:53
    ok so from that id suspect mainly that your Graphics card may be the cause! what graphics card/s are you using?
    I am using the ASUS HD 6670

  • Black screen on boot /w four red LEDs on D-Bracket

    Whenever I go switch the power off on my PSU and turn it back on, and after pressing the power button on the front of the computer it doesn't post it acts as if I kept pressing the reset button.
    The D-braket shows 4 red leds (which means damaged/not installed processor).
    But if I hold the power button to turn if off, then I turn it back on it works flawlessly!
    Am I doing something wrong? I didn't have this problem before.
    Specs are below....
    BioHaz

    I did a Google search and found this below...
    This happens to be my exact same problem, it happens when you turn on the PSU switch then turn on the computer immediately after that. It seems like you just have to wait.
    Is this a common problem?
    Should I worry about this?
    Quote
    The old black screen on boot up with four red LEDs on the D-Bracket
    is a fairly common problem.
    So far I've only seen four fixes for the problem.
    1.  Defective motherboard (Although this is seldom the problem)
    2.  Power supply is defective, or you forgot to connect the four
    wire auxiliary power connecter to the motherboard.  The auxiliary power
    connecter must be connected for this motherboard to work.
    3.  Your reset switch is stuck.  Disconnect the reset switch from the
    motherboard, then try to boot up.
    4.  This one is weird.  It fixed my problem, however, based on the
    troubleshooting you've done, I don't hold out hope it will fix yours.
    For some strange reason, some MSI motherboards will not boot
    if you've just plugged them in.  Plug in the computer, make sure
    the power strip and the switch on the power supply are all in the
    "ON" position, then go grab a beer.  After waiting a couple of minutes,
    turn on the computer.
    I know it sounds weird.  But I have the same motherboard and CPU.
    If I turn on the power strip and attempt to boot my computer immediately,
    I get a black screen and four red LEDs.  If I turn on the power strip and
    wait a minute or two, the computer boots up every time and works
    perfectly.
    Hope this helps.
    "Bratek" wrote in message
    news:[email protected]...
    Self-build K8T Neo/Athlon 64 - All went well and installed without
    issue.  Proceed to start for first time, POST Message of "Device not
    installed, Bios not found" Not verbatim but basically that.  Could not
    get past that except to enter CMOS Setup, RAID setup etc.  Attempted
    Win-ME Start-up disk and got to a command prompt and attempted to
    install Xp Pro, started but gave error of hard drive not found though
    all SATA connections were solid. Decided must be related to the BIOS
    not found issue.  Downloaded latest BIOS for AMI for this board and
    from command prompt typed A:\adsfI712.exe a6702vms.160  The screen
    showed the Flash and then the Programming without a problem.
    Restarted PC and Monitor was BLACK. Checked all conn's, replaced Video
    card etc.
    Next step, Copied Flash Util: adsfI712.exe and renamed BIOS of
    amiboot.rom and restarted PC holding Ctrl-Home for at least 5 mins. No
    success. Attempted Clear CMOS Jumper, replaced and Restarted with
    Floppy Amiboot.rom again. No Success. noted D-Bracket with 4 Red LED's
    on back. I know what that means but do not know if that was there all
    along. Removed CPU Heatsink and verified power, connections and
    reseated CPU and replaced Heatsink w/ no problems noted. Repeated Boot
    steps with amiboot.rom but still black screen throughout. Please Help!
    Thanks in advance.
    AMD Athlon 64 3000+
    MSI K8T NEO FIS2R
    AMI Bios (attempted 1.4 and 1.6)
    Legacy DDR 512MB PC3200 400mHz Single
    Nvidia GeForce FX5200 (temporary)
    Maxtor 160GB SATA 7200 8MB
    Emprex DVD Dual 8x DVDRW
    Raidmax PSU 420W
    Windows XP Pro Eventually

  • MSI 270x Gaming tf - one fan not always start

    Hi,
    i bought recently MSI 270x gaming and mine problem was high temperatures. I discovered that one of the fan doesnt work (it look like he had too less voltage to start). I touch him gently and he start work fine for few days (shut down pc for night). Sadly yesterday he wont start again on turn pc (it look like turn power up -> both fans start rotate few times, they stop and next they go on little higher rpm - this is moment when one of fans have troubles).
    Fan look really fine, doesnt have any resistance to rotate when you touch him, its look more like problem with control from voltage system.
    Its possible to change video card bios in way to give more power to fans on start (i think this will solve problem with not starting fan).
    Here is mine vbios h.ttp://www.filedropper.com/pitcairn

    There have been several issues reported about fans on this card model. Seems a batch of this are simply bad. Contact MSI about it or contact reseller for rma. >>How to contact MSI.<<

  • Black screen on boot & Diagnostic errors

    Hi, 
    I've a HP g62 notebook pc that has some problems when is booting.
    Sometimes the screen is black when i try to boot or i've a BSOD related with the atikmpag.sys.This PC doesn't have warranty, but i don't know if the problem is only because of the SO or if there is any hardware failure.
    The PC model is the: g62-b10sp. Product id XF293EA#AB9
    System ID 143A
    I tried the HP diagnostics wich I retrieved the some test menssages: Memory Test: PASSED
    SMART CHECK : PASSED
    Short DST : PASSED
    Optimized DST : PASSEDHard disk test: PASSED
    Battery Test : Primary - Replace
    Failure ID: MBQ3W8-5667NG-9XL03F-C0F403 Start-Up Test : FAILED
    Failure ID: MBQ3W8-5667NG-9XL03F-X0F403 Run-In Test: FAILED
    FAILURE ID: MBQ3W8-5667NG-9XL03F-C0F403 System Tuneup: FAILED
    FAILURE ID: MBQ3W8-5667NG-9XL03F-C0F403 
    Someone from the HP support team could help me? 
    I wanna know what those failures id are related... They are failures from motherboard/graphics?
    Thank you for you attention
    Best regards

      Hi , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP G62-b10SP Notebook and an Black screen on boot showing. Thank you for the error messages and the explanation. Very helpful in diagnosing the issue. The first error Battery Test : Primary - Replace
    Failure ID: MBQ3W8-5667NG-9XL03F-C0F403 the Real Time Clock battery needs to be replaced. All the others are the same error message as one can not perform as the Real Time Clock battery needs to be replaced. I recommend to replace the Real Time Clock battery and run the tests again. Here is a link to show you the part number and what you need to do to replace Real Time Clock battery. Page 51 for the part number and shows you how to replace it. I hope this helps, please let me know how it goes. Thanks.   

  • Mac Pro intermediate black screen at boot after installing mountain lion

    I have a 2008 Mac Pro tower, but since installing Mountain Lion I now get a random black screen at boot. Unplugging the apple cinema 20' power supply for 15 minutes seems to clear the fault. Have had no such problems with other OS until Mountain Lion, seems OK when booting to Snow Lepoard on my other drive?
    Anyone have the same fault?

    Thanks for trying the help! I tried every version of start up, but with no screen it was no good..
    Finally solved the problem, it was the ATI HD 2600 XT graphics card that was dying a very slow death.
    Replaced it this morning with a GT120 Nvidia.
    Anyone with this card should Google it, as apple did a big recall on these..
    http://www.itproportal.com/2011/02/21/apple-extends-warranty-mac-pro-video-cards /

  • Win 7/Z580: Black screen on boot up, before login screen?

    Win 7/Z580: Black screen on boot up, before login screen?
    =======================================
    I find some interesting posting in this forum. Thanks for keeping this forum to help windows/Lenovo community. I like to pick up the brain of this forum to resolve the black screen issue. I am not sure, whether it caused by virus. I use Microsoft Security Essentials. I am not able to run this in command prompt.
    I started my laptop this morning & login screen showed up. Once I entered my login credentials, I heard the sound that usually plays once a login is successful, but I ended up with a black screen. After this occurred, I had to hold down the power button to manually shut down the computer. Once I started it up again, I was prompted to do a system repair, which eventually ended up with all successful outcomes, but I now have a black screen with a cursor before the login screen now. I have no idea what caused this to happen. My laptop is a Lenovo Ideapad Model Z580 (500 GB HD, 6GB RAM).
    I am not able to get into safe mode or any other mode, which all leads to a black screen described above. I am able to use the "Repair Your computer" tools after pressing F8 during booting only . All other options leads to Black screen with cursor in the middle
    Last Known Good Configuration leads to same
    Enable Low Resolution Video (640x480) leads to same My Z580 is not responding to CTRL+ALT+DEL Windows Logo keys as well.
    **** I tried SAFE Mode. It loaded couple of drivers and paused at CLASSPNP.SYS load. It went to Black screen with cursor at center.
    I am able to invoke control pannel from Command prompt of working PC by typing control.
    Z580 PC is not responding to control from command prompt (under Repair Your computer)  either.
    Z580 is able to use the "Repair Your computer" tools after pressing F8 during booting .
    Under local user login it provided Start Repair option. As I pick this option, I got the following. Problem signature
    Startup repair offline
    1 - 6.1.7600.16385
    2 -
    6.1.7600.16385
    3 - unknown
    4 - 21200332
    5 - autofailover
    6 -
    4
    7 - NoRootCause
    os v - 6.1.7600.2.1.0.2561
    locale id – 1033
    Under Admin user login, it provided system recovery options. It is not picking up the recovery point created a while ago.
    Windows Memory Diagnostics is not launching and shows a black screen without cursor.
    I am able to get into command prompt. I tried the following there.
    I am not able to run cmd as admin
    I reviewed the past posting of this forum on this subject.
    Windows 7 boots to an unresponsive black screen with mouse cursor...
    System File Checker: Run sfc /scannow & analyze its logs in Windows 7 / 8
    Windows Resource Protection could not start the repair service
    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista
    Force SFC to Run in Windows 7
    Windows Resource Protection found corrupt files but was unable to fix some of them
    SFC /SCANNOW showed up
    "Windows Resource Protection could not start the repair service
    I did "net start trustedinstaller"
    "Windows Resource Protection detected pending repair restart the computer"
    I ran repair options using sfc /scannow /offbootdir=x:\ /offwindir=D:\windows
    and got "Windows Resource Protection found corrupt files but was unable to fix some of them "
    I did findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt I will be glad to attach the zip file that contain CBS.LOG & [SR] tag extract (xxx.txt).
    I did not any find ERRORS there, SFC ended with message saying "found corrupt files but was unable to fix some of them" . It is misleading. There is no [SR] tag pointing to corrupt files. Does SFC through false positive like this?
    I ran chkdsk. ResultsFile verification completed.
    0 bad file records processed.
    0 EA records processed.
    CHKDSK is verifying indexes (stage 2 of 5)...
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered.
    Windows has checked the file system and found no problems.
    0 KB in bad sectors.
    Failed to transfer logged messages to the event log with status 50.
    It is puzzling me.
    Thanks for helping.

    I tried these steps 8/7/2015. I ran chkdsk. Results for D:\
    File verification completed.
    0 bad file records processed.
    0 EA records processed.
    CHKDSK is verifying indexes (stage 2 of 5)...
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered.
    Windows has checked the file system and found no problems.
    0 KB in bad sectors.
    Failed to transfer logged messages to the event log with status 50.
    Updated on 8/7
    ============
    Here are my HDD config:
    Volume ### Ltr Label Fs Type Status Info
    Volume 0 F WDO_Media64 UDF DVD- Healthy
    Volume 1 C NTFS Partition Healthy
    Volume 2 D Windows7_OS NTFS Partition Healthy
    Volume 3 E LENOVO NTFS Partition Healthy
    Volume 4 G FAT Removable Healthy
    Volume 5 LENOVO_PART NTFS Partition Healthy Hidden
    I ran CHKDSK /F /X for C, D, E. All resluted to "Windows has checked the file system and found no problems."
    F8 ===> Repair Computer===> Command Prompt ===> Works OK
    F8 ===> Repair Computer===> Start up Repair ==> Results into "Startup repair could not detect a problem"
    F8 ===> Repair Computer===> System Restore ===> "No restore points has been created on yout computer system drive"
    F8 ===> Repair Computer===> System Image Recovery ===> "Windows cannot find a system impage on this computer"
    F8 ===> Repair Computer===> windows Memory Diagnostiyics ===> "Black screen with Cursor in the middle"
    After getting into Command prompt
    I run net user
    User accounts for \\
    Administrator Guest
    The command completed with one or more errors
    It did not list other users in my laptop. I do not know why? I tried under F8 ===> Repair Computer===> Command Prompt ===> Works OK
    Here is the result:
    - Boot with Last Known Good Configuration (F8 menu) ===> Black screen with cursor in the middle
    - Restore to a prior date (System Restore) - System Restore ====> Already reported in previous reply
    - Try a clean startup Troubleshoot Application Conflicts by Performing a Clean Startup results in
    Clean Start up
    D:\Windows\System32>runas /user:administrator msconfig
    Enter the password for administrator:
    Attempting to start msconfig as user "MININT-84TH5FG\administrator" ...
    RUNAS ERROR: Unable to run - msconfig
    1060: The specified service does not exist as an installed service.
    - Try loading defaults in BIOS - F2 ==> f9 ==> f10 ===> Black screen with cursor in the middle
    Check if explorer.exe is running and start from CTRL+ALT+DEL (task manager - new task) ===> CTRL+ALT+DEL not responding
     Is anybody in this forum point me to fix? Thanks for looking into this issue. 

Maybe you are looking for