MSI 290X Can't use Displayport and HMDI at the same time

Howdy:
I have two monitors running Win 7. 1. ASUS Black 24" 2ms HDMI LED monitor connected to the HDMI of my MSI R9 290X Lightning and a Dell VGA connected via Cable Matters DisplayPort to VGA adapter. Both monitors go black if I try to connect both. When I boot with both I get the splash screen but then nothing afterward. I can boot with either of the above connected separately to their respective plugs but not both.
Is there something I'm missing? I've cleaned out all of the shadowed displays in the device manager leaving only the highlighted PnP Monitor which has always been there.
Both monitors worked just fine via the HDMI and VGA to DVI-I adapter on a Gigbyte HD 7870. But since the 290x only has HDMI, DVI-D and DispayPort I am left with using the Output display for the Dell VGA monitor.
Any ideas how I can get my system to run the Dell VGA to DisplayPort?
Dell VGA to DisplayPort adapter to displayport works if only this is connected.
ASUS HDMI works if only this is connected.
Both go black if either of the above is then connected as the 2nd monitor.
Currently using AMD 14.12 Omega drivers
Thanks
Chops
Intel Core i7-3930K Sandy Bridge-E 3.2GHz (3.8GHz Turbo) LGA 2011 Six-Core
MSI R9 290X LIGHTNING 4GB 512-Bit GDDR5 PCI Express 3.0
ASRock X79 Extreme6 LGA 2011 Intel X79 SATA 6Gb/s USB 3.0
COOLER MASTER HAF X Black Steel/ Plastic ATX w/tons of cooling
CORSAIR Hydro Series H100
ASUS Black 24" 2ms HDMI LED
DELL VGA
G.SKILL Ripjaws Z Series 16GB (4 x 4GB)
CORSAIR HX Series 750W SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular PSU
Logitech G510s Keyboard
Logitech G13 gamepad
Logitech G600 Laser Mouse
Logitech Z623 200w 2.1 Speakers

Hi JL, thanks for your reply
Yes, when I unplug any of the cables the connected monitor comes on. I did boot with the HDMI connected, in CCC I then plugged in the VGA to Displayport (DP) monitor. The DP Monitor icon appears but is said to be disabled. It remains disabled after clicking "detect"
In the device manager, both Generic PnP Monitor properties report "This device is working properly". When I unplug the DP monitor, the icon greys out.
I tried "extend" and "duplicate" but then the HDMI goes black and with the DP VGA remaining black. Unplugging and replugging either does not bring either monitor back. I have to reboot to get the HDMI to work again.
If I choose "Eyefinitety" then both monitors will work, but as the DP VGA default monitor. This causes the Larger ASUS monitor to default to a much lower res. I can not make the HDMI monitor the default as this point.
Only twice I've been able to get the DP monitor to work with the HDMI monitor via waiting 10 sec or so after booting to Windows then plugging the DP monitor in. Everything worked perfectly. Went I booted up the next day the DP monitor didn;t come on. That was 4 days ago and I haven't been able to get the displayport monitor to work since.

Similar Messages

Can we use exceptions and conditions at the same time?

can we use exceptions and conditions at the same time? Are there any dependencies between exceptions an conditions?

Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Can WRT54G use WPA and WEP at the same time?

I used to have a smc 802.11b wireless router and a dlink 802.11b wireless print server.
In order to have WPA and a firewall, I replaced the wireless router with a linksys WRT54G.
Then I realize the dlink print server, even though it has the "g" keyword in the model name, does not do WPA (DP-G321).
Do I have to buy a 802.11g wireless print server? Or is there another solution?
I don't supposed the linksys router can do both WPA and WEP at the same time?
Connecting the print server to the router with a cable is not feasible. They are on different floors.

both of your devices are has a wireless b technology settings, just set a wep encryption on your network rather than wpa because some wireless b devices don;t work with wpa. with regards to your query if wep and wpa can be used at the same time, the answer is no.

Can we use CS6 and CC at the same time on different machines?

We have a Creative Cloud subscription and have software downloaded to an iMac and also to a PC. I understand that we can't use the applications on both machines at the same time, but could one of my colleagues use the CS6 versions at the same time on the PC?

Hi Carol
A subscription to Creative Cloud gives you access to the CC version and the CS6 version of the software. From the original question, it seemed to me that they were asking if they can share the subscription between 2 colleagues if one used the CC version and the other used the CS6 version. That is not permitted as the subscription is licensed to one user.
If you have a Creative Cloud subscription and a perpetual license for CS6 then you can use them concurrently on 2 machines as they are separate licenses.
Does this help clarify?
Thanks
Bev

Can't use iPhone and Mail at the same time

When my iPhone is on I can't receive Apple Mail on my computer. I get an error message on the computer that says another client is using the mail (or something to that effect). If I turn off the iPhone the error message usually disappears on my computer allowing me to access mail. Is there something I can do so I can keep my iPhone on and also get Apple Mail at the same time?

Never seeing this problem.
Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
Ernie

Can't use Skype and PhotoBooth at the same time?

I recently updated my Skype to the new version. I used to be able to have my camera on PhotoBooth and Skype working at the same time, however since I made the update I cannot. Depending on which programme I open first, the other will not work. If Skype is working, then the error message 'Camera offline' comes up. I have tried uninstalling and reinstalling Skype and that has not solved the issue. Does anyone have any ideas? Thanks.

Never seeing this problem.
Are you using a MobileMe IMAP account or another provider and account? Is problem when using the Apple Mail application in OS 10.4.11 on your listed G5?
Ernie

G510 Can´t use keyboard and mouse at the same time

I got my y50-70 laptop four days ago for gaming and when i played portal for the first time i noticed I had a really hard time playing it. It wasn't until I was at Glados that I realized that it was because my laptop wouldn't recognize my finger movements while i was using the keys.
Ive been researching this for the past day and can't find the solution, and I believe its because my settings seem to be different? Ive looked at multiple solutions and everything says to turn palm checking off, but I dont have that option? I can turn it down, just not off (it does nothing btw). I was wondering if anyone else has found the solution to this problem yet and came here.
It would really help if you had pictures so I can figure out where to go in settings (a lot of the things Ive read has told me to go to a certain settings tab that I cant find??. Thank you so much btw!

Update: I clicked around and somehow disabled elan. My problem is solved but I no longer have two finger scrolling (my favorite feature). If you're looking for a solution to this problem and dont care about zooming, scroling, ect, what I think I did to disable it was rolled my driver for my mouse back. To get there just search for device manager, click on the one that says something about mouse, and go to the driver tab.
If you have another suggestion please suggest it!!! I can live without two finger scroll, but would like to have it :/

Can I use Iphone and Ipod at the same time?

I use an Ipod now. If I bought an iPhone and sync it with my iTunes... will it no longer allow syncs with my regular iPod? Or can I have both my purchases on both devices?

ok so it I can still use both, like movies (including rentals) on my video ipod, and my music on my iPhone. (storage is the reason for the two devices.)?
Yes, but the Fifth Generation iPod cannot play rented movies; it only works with purchased ones out of those from the iTunes Store. The iPod classic, third generation iPod nano, iPhone, and iPod touch will play rented movies.
(30603)

How can I use REQ1 and REQ2 at the same time to send two different groups of data to two blocks of buffers?

I want to use REQ1 to send data1(16bits) in th rate of 10MHZ to buffer1 and REQ2 to send data2(16bits) in the rate of 1KHz to buffer2. The first part(sending data1) has been done(using the attached file).How to re-cofigure the ports to send data2 to buffer2?
Attachments:
DIsingleBufExtTrig653x.C ‏6 KB

Greetings,
Essentially, this is a matter of duplicating this code for use with the second group. However, be certain to change the group parameter to 2 for the function calls being used with the second group.
Good luck with your application.
Spencer S.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Can't recording Midi and Audio at the same time

I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
Tracy

Hi!
Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

I cannot use data and voice at the same time.

I cannot use data and voice at the same time.
I am on Wifi (connected) and at the same time I am on a voice call. when I switch to my RSS feed reader it does not sync it comes out with a message cannot connect to internet, I thought it is a problem with the feed reader application, IE 10 behaves the same I cannot browse when I am on a voice call.
This is a very basic issue, am I missing something? Please help.
My Model is lumia 820 with the latest portico update.
TIA
Sandeep

I am aware that packet data via EDGE and voice cannot happen at the same time, surprisingly when I am on voice call I cannot connect to internet via Wifi too

How can i use offline & online database in the same time?

how can i use offline & online database in the same time?
my database in another server when the connection true it connect
but if not does not work
i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

User, please tell us your Jdev version!
There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
If you can't connect to the db the application will not work.
Timo

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

MSI 290X Can't use Displayport and HMDI at the same time

Similar Messages

Maybe you are looking for