MSI 3D TURBO EXPERIENCE Doesn't Work

I was told that I could read my GPU tempertures with this program that I got with my MSI Geforce 4 4400. I installed the program but the window closes after about two seconds and it says that the temperature is 0. Anybody with this program know how to fix this? Thanks.

It appears my suspicions were partly correct.
Evidently there are versions of the GF4 that do not support Hardware Monitoring. If you find any discrepancies, please notify me by PM.
A little birdy told me:
List of VGA cards that support Hardware Monitor
Blank means Not Supported
Website already modified
Ti4600-TD8X (MS-8900)
Ti4800SE-TD8X (MS-8900) Supported
Ti4800SE-VTD8X (MS-8900) Supported
Ti4200-TD8X (MS-8894) Supported
Ti4200-TD8X64 (MS-8894) Supported
Ti4200-VTD8X (MS-8894) Supported
MX440-TD8X (MS-8888)
MX440-T8X (MS-8890)
MX440-VTD8X (MS-8888) Supported
G4Ti4600-VTD (MS-8872)
G4Ti4400-VTD (MS-8871)
G4Ti4200-TD (MS-8870)
G4Ti4200-TD64 (MS-8870)
G4Ti4200-VTD64 (MS-8870)
G4Ti4200-VTP (MS-8886)
G4MX460-VTP (MS-8867) Supported
G4MX440-T.(MS-8866) Supported
G4MX440-P(MS-8866) Supported
G4MX440-VTP(MS-8866) Supported
MX440SE-T(MS-8878)
MX440SES-T(MS-8873)
G4MX420D-T(MS-8878)

Similar Messages

MSI 3d Turbo Experience

Is MSI 3d Turbo Experience able to work on Windows XP and also is it able to work with Geforce FX 5600TD 256MB?

It appears my suspicions were partly correct.
Evidently there are versions of the GF4 that do not support Hardware Monitoring. If you find any discrepancies, please notify me by PM.
A little birdy told me:
List of VGA cards that support Hardware Monitor
Blank means Not Supported
Website already modified
Ti4600-TD8X (MS-8900)
Ti4800SE-TD8X (MS-8900) Supported
Ti4800SE-VTD8X (MS-8900) Supported
Ti4200-TD8X (MS-8894) Supported
Ti4200-TD8X64 (MS-8894) Supported
Ti4200-VTD8X (MS-8894) Supported
MX440-TD8X (MS-8888)
MX440-T8X (MS-8890)
MX440-VTD8X (MS-8888) Supported
G4Ti4600-VTD (MS-8872)
G4Ti4400-VTD (MS-8871)
G4Ti4200-TD (MS-8870)
G4Ti4200-TD64 (MS-8870)
G4Ti4200-VTD64 (MS-8870)
G4Ti4200-VTP (MS-8886)
G4MX460-VTP (MS-8867) Supported
G4MX440-T.(MS-8866) Supported
G4MX440-P(MS-8866) Supported
G4MX440-VTP(MS-8866) Supported
MX440SE-T(MS-8878)
MX440SES-T(MS-8873)
G4MX420D-T(MS-8878)

Turbo boost doesn't work

Hello friends. I just formatted my laptop 3 days ago and my turbo boost doesn't work any more. It keeps at 2.50 gHz all the time. I can't play games properly etc. What should i do? Thank in advance. Sorry for my bad English :c

Try this: Go into Power Manager, switch to Advanced mode, and switch the CPU setting to Maximum Turbo on AC.
Turbo stopped engaging for me a while back, and one of these things worked.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

3d turbo experience moniter isnt working

I have a MSI GeForceTI4400 128mb and when i go into 3d turbo experience to see my temp and fan speed and stuff like that, it is grayed out and i cant do anything but change the size of my screen, core speed, memory speed, and multiple desktop. but the information screen in bottom right is working as well, but core screen, fan and temp screen are grayed out. I have tried to reinstall many times but im wondering if its drivers or bios or what, i have the new 40.41 drivers i belive for my card, so i dont know what else to do. Please help ?( ?(

thanks, I noticed that you have 305/660 next to your graphics card, is that your core clock and memory clock speeds, and if that's so do you have any special cooling to accomplish that, im always scared to over clock not to explode a 200 dollar graphics card or processer heh. know of any good sites that will help me with some information on over clocking msi cards and that such. Thanks again for your help Denis )

MSI - P7N Diamond ESATA doesn't work under XP

I have 2 P7N Diamond motherboards and am running XP Pro/sp2.
I have never been able to get the esata ports to work. I have spent the last 4 months RMAing boards back and forth to MSI. I have tried at least 4 motherboards, 3 esata external drives, and 3 cables (all 6 feet).
Sometimes on the upper port (lower port doesn't work at all), the drives get detected in bios as gibberish. Other times it is listed correctly in post, but then I get a "9th slave hard disk error". I press F1 to resume, enter the bios, and the drive shows up. The drive never gets detected in windows, however.
In bios I have the Extra IDE/RAID Controller enabled and RAID mode is set to IDE.
In XP I have the JMP36X IDE Controller installed.
During all this time, MSI Tech Support has insisted that I am doing everything right. I called them last night and they mentioned doing an rma yet again, but when I called back today and talked to someone else, he told me that esata only works under vista in AHCI mode. He said that it won’t work under XP in IDE or AHCI mode.
Hope someone can help me!!

Thanks for the reply.
Quote from: NovJoe on 19-July-09, 17:51:41
Have you tried to install the RAID controller driver using F6 option by using the XP installation disc?
I did that when I installed XP.
Someone provided this link to set up AHCI mode. Plan to try that in the next day or two.
http://http://expertester.wordpress.com/2008/07/27/how-to-enable-ahci-windows-xp/

Getting rpm values from the fans on the MSI NEO2-FIR motherboard doesn't work

I currently have 6 Noctua NF-S12-1200 120mm fans spinning in my computer but i am unable to get rpm values from them except the cpu-fan. It doesn't work to get a readout from the others with either, BIOS, Dual Core Center or Speedfan. Regarding Speedfan is it true it don't support the SuperIO Chip on the Neo2, the FINTEK F71882F? It's not currently listed in their supported temperature sensors list.
So whats the problem? Shouldn't atleast DualCore Center atleast show the rpm's from the other chassis fans?
Or the fans don't support sensor readings?
Thanks!

Quote from: Jack on 13-October-10, 00:15:36
Well, there is nothing that can be done about. SysFAN 1 & 4 support sensor readings, #2,#3 and #5 don't. You can also see that in BIOS Setup. #1&#4 are the only ones that show up there (H/W Monitor section). This is not a malfunction or a bug. You have to live with no fan sensor readings or be creative about the wiring.
The problem is that i use the UNLA cables from Noctua which half the speed of the NF-S12 fans i run with. And it blocks the rpm readouts in Speedfan and BIOS.
http://www.noctua.at/main.php?show=productview&products_id=5&lng=en
Strange thing is that the CPU fan reads fine with the ULNA cable attached but the SYSFANS will not read the rpm with the ULNA cables.
What is wrong?

Core i7-2720QM on Macbook pro 2011: Turbo Boost doesn't work! It's possible?

I test my core speed with MacCPUID that show real time cpu frequency. I try it in normal condition and running extreme application. Everytime my cpu frequency is something like 2.199 - 2.200 but never more than 2.200 ghz.
So I have to think that Turbo bost is not active on macbook pro and all the things in apple website about this feature are false!
Is it possibile? Who knows something more about this?
Greetings,
Stefano

Yes, there is Turbo Boost active on all MacBook Pros. There is no real way to measure turbo boost unless you're in BootCamp, using Intel's Turbo Boost Monitor. The Intel website states that not all CPU measuring software will correctly display the turbo frequency because it's either not current, or doesn't support turbo boost. If you have BootCamp installed go ahead and search Intel Turbo Boost Widget. download, and install it, this will give you correct results. You can't really measure turbo in OS X.

MSI GT628 - WLAN Button doesn't work

Hello. I've just noticed that even when I don't press the WLAN button (led indicators for wlan are off), I can still access wlan points. Does anyone have the same problem? Anybody know how to fix this? I've already got System Control Manager running, and the buttons work for the Webcam, Bluetooth, and P1.

I upgraded to Windows 7 from Vista a few days ago, and I just recently noticed...
Doesn't having your WLAN on all the time use your battery or something? I'm not that bothered as well, but since its working against the expected behavior I thought I'd ask people who know better. Just had my notebook for a week. ^_^

How do i get serial number 2 if the msi help desk software doesn't work?

i have been trying to register my msi 980 ti for the MGS promo but i cant get the msi help desk software to work just keeps saying "The MSI Help Desk is only for MSI product." although i clearly have a msi video card, is there any other way to get the ...

Quote from: sply011235 on Yesterday at 18:05:14Can´t find Windows 10 Drivers for GT 72 2QD (4th Gen CPU)
Anybody knows if MSI is working on them? Will they become available?
They are not available on the MSI US...

[Vox] MSI VOX TV Box doesn't work

Hi,
I hope somebody here can help.
I loaded up the drivers from the CD that came with my MSI VOX TV Box USB 2.0 and nothing is happening. I also tried the drivers and software from MSI's website.
When I load up the hardware driver, I get an error message saying the driver doesn't pass the Windows Logo test. If I continue with the installation, my computer recognizes the card, but I can't do anything with it. The software that came with the VOX (it came with Intervideo MSIPVS 3) doesn't load up. The WINDVR.exe program shows up in the processes when I click on CNTL-ALT-DELETE, but the program doesn't do anything on my computer.
I am running Windows XP Media Center on my laptop.
Please let me know if you can help or if I need to provide any other info.
Thanks.

Hi,
Thanks for replying.
I am running Windows XP MCE version 2002 service pack 2.
Dell Inspiron 6000
Intel Pentium M 1.60GHz
797MHz, 512 RAM
60GB hard drive
I am using the power adapter that came with the Vox. I used it with the power supply as well as just with the USB 2.0 cable.
Please let me know what other information I should provide.
Thanks.

Re: how do i get serial number 2 if the msi help desk software doesn't work?

Look for a small sticker at the back of the card.
it should be like "FXXXXXXXXX"
The font is a bit small.

MSI Help Desk
Please run MSI Help Desk software and click System Info at the lef...

G4MX 440-T 3d turbo experience warnings!!!

i have bought a msi mx 440-t card. i have a asus cusl2-c motherboard with a pentium 3 processor. whenever i install the msi 3d turbo experience the msi live monitor gives me warning messages that "core temperature is unusual. it is now 3.06 volt." or "memory i/o voltage is unusual. it is 2.68 volt." but when i open the flah program the bars in a green region indicate voltages around 2.54 and 2.56 volts. my local dealer says that it is nothing and i should uninstall the software. is he correct or my card is malfuctioning. is the card getting heated and will be damaged or is it nothing to be afraid of?

FOR ONE THING ,try to delete the shortcut for 3 dturbo experiance.exe,and goto were you installed it,use the 3 dturbo.exe instead, you will find it in c:Program Files/msi/3dturbo,if you did a standard install.i see your board suports 4x agp,,,,,,3.0 volts is indicative of 2x agp,but it looks like you have your bios set to 4x right?
do you have the latest bios???? ?(
go here http://www.asus.com.tw/support/download/item.aspx?ModelName=CUSL2-C

3d turbo experience alerts

i have bought a msi g4mx 440-t card. i have installed the card carefully and checked the slotting repeatedly.
i have a asus cusl2-c motherboard and pentium 3 800 mhz processor and 256 mb sd ram. now when i install msi 3d turbo experience it shows me messesges from time to time like "core voltage is high 3.06 volt" or "i/o voltage is high 2.68 volt" etc . should i be alarmed or is it just a bluff by the software. also i got a score of 3737
in 3d mark 2001. is it ok for my machine. please let me know. thank you

thanks, I noticed that you have 305/660 next to your graphics card, is that your core clock and memory clock speeds, and if that's so do you have any special cooling to accomplish that, im always scared to over clock not to explode a 200 dollar graphics card or processer heh. know of any good sites that will help me with some information on over clocking msi cards and that such. Thanks again for your help Denis )

My turbo doesn't work for games. MSI GE60 ONC

Hello everyone,
I got a problem with my GE60 onc.
I had problems with the internet and stupid ad pop ups, so I asked a friend if he could look at it.
He has a pc himself and knows a lot about all this kind of stuff. So he plugged in a portable drive where he had programs to clean his own pc with on there. He opened this anti junkware program and it was inside of the cmd. He fixed all the pop up ads and stuff, but now when I try to start up games the turbo button doesn't light up and my games run much slower. (Cube World, Dayz, Payday 2) And I don't know how to fix this...:( If someone knows how to fix it I would gladly appreciate it!
Thanks guys.

What Windows version are you using? Did you install the Windows system on your own?
Can other quick launch buttons work properly?
- Try to do an EC reset by removing the battery and the AC adapter, then reattached them back on for a reboot.
*Share your EC version by looking into the BIOS menu.(Press Delete button after seeing MSI logo on the screen while powering on> Main> System Information)
When you say the game is running slower, do you mean there is game lag? or lower FPS? or you mean the frequency...?
Also did you try to update the graphics driver? What graphics version are you using?

MSI R5970-P2D2G Woes: Lockups in 3D Applications + Fan Controt doesn't work.

Hello,
Yesterday (5/10/10) I received my MSI R5970-P2D2G in the mail. I've been in the market for a HD5970 for quite a while, but living in Latin America it's been next to impossible to get one. I finally managed to get a brand new R5970 through the Amazon marketplace. Anyhow, since the card arrived yesterday I've been trying to get this thing to run properly.
The card locks up mere seconds into any 3D application, roughly when the GPUs reach around 75C. A Furmark multi-GPU stability test will make the card hard lock my system in mere seconds, whereas 3D Mark Vantage actually manages to get through most of GPU Test #1 before hard locking. It usually hard locks somewhere in between the end of GPU Test #1 and the beginning of GPU Test #2. I've only been able to complete the 1-minute Furmark benchmark once. Let's not even get started with trying to play any games. My system just hard locks minutes in.
The other problem I have is fan control. Manual fan control through CCC doesn't work. If I tick the "Manual Fan Control" checkbox and try to move the slider and hit "Apply", the fan immediately jumps to 100% speed regardless of where the slider is. Unchecking "Manual Fan Control" leaves the fan running at 100% for a few minutes before it starts slowing down. MSI's own Afterburner utility doesn't even let me move the fan slider (odd, because it lets me do it on my Diamond HD5870).
My PSU is overqualified to run this card. I've run it through OCCT's 1 hour test with no problems. Same deal with my CPU/RAM overclocks: they've endured hours of Prime95 as well as OCCT with no issues at all. My mobo's BIOS is updated to the last version. I don't think it's a hardware problem.
I've tried:
-Using my old 5870 to uninstall ALL ATI software and drivers, then running CCleaner and Driver Sweeper to get rid of all ATI driver remnants. Shutting off the PC, switching to my R5970, and installing brand new drivers.
-Using a spare drive with a fresh installation of Windows 7 Ultimate 64-bits to try and get the card to run.
-Underclocking the card to see if it ran stable.
-Returning my CPU/RAM to stock values.
-Checking all connectors, trying different PSU connectors, and physically examining the card for any signs of damage.
I made a similar thread over at Anandtech asking for help: http://forums.anandtech.com/showthread.php?p=29817320#post29817320
You can go check it out if you want to find out all the stuff I've tried. About the only thing I haven't tried is flashing the video card BIOS, but there's nothing to flash it too! AFAIK there is only one version of MSI's BIOS for the R5970.
Basically, I'm sort of stuck with a $700 paper weight right now. The few seconds (or minutes) the card manages to run, FPS is sky high and it works like it's supposed to. It always causes a hard lock when GPU temps are nearing 75C though, although I've tried "manually" changing the fan speed to 100% and it still crashes after what seems like a set amount of time. This is all at stock values, mind you. I haven't tried OCing at all. I'm just baffled at the whole thing, as the card is clearly capable of running like it should, it just seems like it can't handle running like it should for more than a few seconds or minutes in some cases. To me, it really seems like the card is borked. Oh yes, the VDDCI Phase #1 sensor doesn't work, reporting a flat 0 on GPU-Z.
Any ideas before I contact the person that helped me buy this card to arrange for a return?

My MSI HD5970 is working like it should, tested it all day.
I used MSI Afterburner and MSI Kombustor to watch the temps on full load, the fan is working and no problems.
(at 65C, 70C, 75C, 80C the fan goes faster, 81C was my max temp on full load)
Maybe i am lucky

MSI 3D TURBO EXPERIENCE Doesn't Work

Similar Messages

Maybe you are looking for