MSI 4600Ti MSI clock and info tabs ....

please someone help......
when I right click my desktop and see display properties I cannot click on the MSI INformation or MSI Clock tabs because everytime I do I get a 'Run a DLL as an APP has encountered a problem" error.
I have tried different driver versions including 45.32, 56.72 and 71.89 and none seem to work. I've also uninstalled, run Driver Cleaner and reinstalled and this still hasn't worked........I don't know what else to try and get these two tabs to work.
Please help.
Many thanks.

darier,
You need to go into your Windows Directory and delete the file msicpl.dll and then install the nVidia Drivers of your choice from the nVidia Website. I would use the 41.09s since they were the best I found for the GeForce4 TI's.
Take Care,
Richard

Similar Messages

Ti4200: problem with MSI CLOCK and info page

Help!
I've just install ti4200 128mb. Everything runs fine, 3d mark even showing 9300+
However, everytime I try to go to the MSI clock and information tab under display properties, I get a Microsoft reporting Error!
I've tried this at W2k and also failed!
I'm running up-to-date MSI v3000 nivida drivers.
P4 2.5ghz
ASUS P4S533
512mb ddr333 ram
WD 800jb
I think its the motherboard, any ideas?!
Thanks in advance.

What's all talk about install other drivers ?.
This is old problem if you would check some old threats.
Problem lies in ASUS mobo, nothing can fix this, yet.
If you have ASUS mobo, use 40.41 Nvidia drivers with Coolbit to overclock you want be sorry.
There is nothing in this flips that you miss.
MSI support knows about this problem you can try to send them note, but they will not response.
MSI support is one of the worst I have ever tried.
Like you everthing else runs great. I would be more unhappy about there is no hardware monitoring for G4ti, I thougt first it was in this flips but they only support it for G4 MX cards. Don't know whey but I'm very angry and I will never get another MSI card.
Regards
Finnbogi
G4ti 4400 VTD
ASUS P4S533
P4 1.8 @ 2.2

Quick Question: MobileMe and Info Tab in iTunes

Hi All
I'm new to the iPhone, but use a Macbook and MobileMe.
My very quick question is...
Should I be using the settings on the phone to sync to MobileMe while leaving the iTunes Info Tab settings unselected?
Hope that makes sense.
Thanks in advance.

Hi,
You can no longer sync contacts with iTunes 11.1.4 with mavericks OS X
http://support.apple.com/kb/PH12117
Jim

I have downloaded itunes 10.3.1.55, when my device connects and syncs, the Summary, Info and Music tabs display, but no text is shown.

I have downloaded iTunes 10.3.1.55, but when I attach my device and attempt to sync, the screens appear, but all the text is gone from the Summary, Music and info tabs. Books, Movies and Apps are ok. I can see buttons, but no text is on the box, so I don't remember what it does. I can see check boxes, but no text.

Don't reset your phone. Resetting will return the phone to factory settings and you will loose everything. Spend some time working toward a fix.
You might want to try a different USB cable. It is possible that your cable conincedentally went bad. I have had this problem before - even cables that will chrage the phone sometimes stop working for data purposes.

I was trying to merge my iPhone contacts with my mac. However, after the info tab at the sync I do not get the option to merge. only overwrite the iPhone or the mac.

I just set up my iphone at the cell phone store - they transferred my contacts from my phone (not mac/iphone related) I now want to merge my iphone contacts with that in my mac. Aftere the uncheck the "Automatically sync and info tab. I do not get the option to merge the two. Only options to overwrite the mac or the phone.
Any suggestions?
Thanks

this problem has been solved

MSI clock and MSI Info Tab TI 4600

Please Help
Every time I try to select the MSI clock and the MSI info tab under the properties control panel in Windows XP I receive a Run DLL error saying their is a problem with file msicpl.dll. I have resetup my entire PC from fdisk to dowloading new drivers the first thing I loaded was the video card and still same error. The card works fine besides this one problem please help.
I Have a P4 20 gig
512 2100 ddr ram
Asus P4S533 Motherboard
Email me or post please!!!
Thank you ?(

wyles,
Download and install the latest nVidia ForceWare Drivers
Delete the file msicpl.dll from your Windows Directory and the problem will go away.
If you want to be able to have the hidden functions, create a file with notepad and put this in it.
Quote
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableHardwarePage"=dword:00000001
"NvCplEnableAGPSettingsPage"=dword:00000001
Save it as agpsetting.reg to your desktop or anywhere you like. Then run it and it will give you all the hidden options from nVidia which include extra Resolution settings for your desktop and overclocking for both the memory and core.
Take Care,
Richard

5700 Ultra 3 - No ' msi clock' or ' msi info' tabs???

I have an FX5700 Ultra card from MSI with the original drivers that were supplied with it installed. Prob is that i used to have the 'MSI clock' and 'MSI information' tabs under display settings, and now they are gone?? I upgraded the nvidia drivers to Forceware drivers and all was fine, but then accidentally set the refresh rates for the adapter and monitor too high. I had to reboot in VGA mode, uninstall the drivers and reinstall the original supplied drivers on the MSI CD. Since then i have no MSI tabs under display settings?? Any suggestions?

man, if u wanna see the clock of the card, get a utilitary like rivatuner. it has a regfile which displays the clock . if u wanna see the clock displayed by msi and DOT, go to msi hp and get the latest driver from it. i recommend u to use http://www.nvidia.com latest drivers and use a utilitary to display your vga card clock.

NX7600GT No MSI info/Clock/Vivid/Starosd Tabs

Hi,
I also have tried several times intalling the MSI drivers 162.18 or 9147 and do not see the MSI tabs only Nvidia tab. I have followed the procedure of uninstalling using add/remove programs, rebooting into safe mode and then I have tried using various cleaners (Driver cleaner & Driver Sweeper). rebooting the system and then re-nstalling the MSI drivers. But still do not get the MSI tabs. I have also installed Dual Core Center & Starosd patch. I do not want to use Coolbits or Rivatuner as an alternative. I Purposely bought this video card because of the above utilities.
Many thanks,

Quote from: dodas on 26-August-07, 21:12:42
I first installed MSI 9147 drivers, rebooted and the all the others(including intel chipset). I think i'll live without them Big thanks for all your time.
look here for much better and usefull VGA applications, like RivaTuner, NvTray, nVHardPage SE, NvTemp Logger, AtiTool:
https://forum-en.msi.com/index.php?topic=107133.0
you are welcome.

How to get rid of D.O.T tab&MSI info tab?

Hiya people
Does anyone have any idea,s on how to get rid of the msi info and DOT tabs in the display properties
I,ve looked thru the forums and someone said the msi drivers introduce a new dll to the win/system32 folder and the only way is to format the drive ,i don,t wonna do that as i,ve just recently formatted.
Its not a major fault or anything as i think they are harmless, they just annoy me being there,i prefer coolbits for my overclocking.
Any idea,s would be greatly appreciated thanks
AthlonXP2800+ Bartoncore @2083MHZ WinXP pro sp1
Epox NForce2 8RDA+ mobo
2x512MB dualchannel enabled
MSI NX6800GT 256MB videocard @400core 1100mem forceware 65.73beta
Audigy Soundcard + 5.1 soundsystem
Sony Trinitron 21inch FlatDisplay

Quote
Originally posted by CDM
Well Congrats on answering your own question with in 16 minutes

I cannot use MSI clock or Info in properties

I cannot use MSI clock nor Info in display properties, nor can the 3d turbo work, it errors, it seems everytime I try to do MSI clock on my GF4 4200 128, it says error occured while windows was working with conrol pannel file c:winntsystem32desk.cpl
what do I do to fix this? thanks

Dave,
I since you have a Video Card and you posted in the Anything Under the Sun Motherboard Forum, I moved the thread to Multimedia Forum for you.
Good Luck,
Richard
P.S. Delete the file msicpl.dll and use the latest Detonator 4 Drivers from nVidia and you should be set.

Desp.cpl error opening MSI Info tab...

I've just installed MSI 45.33 drivers for my FX5600-VTDR128 card under Win2K SP4... This is from a clean install of the operation system and before installing the drivers the video was the default "standard VGA" you get during the win2K install...
The drivers work using directx diagnostics but when ever I go into the display properties dialogue and attempt to select the MSI Information tab I get the error dialogue:
"An error occurred while Windows was working with the Control Panel file D:\Winnt\system32\desk.cpl"
Anyone know how to fix this?
Thanks
Dave

Richard,
Unfortunatly because of problems getting my TV card to work I have to use the more recent MSI drivers than the currently available Nvidia reference drivers...
One thing I've noticed is that the desk.cpl file was one of the items updated in Win2K SP4... I might have to see if replacing it with an earlier version removes the problem. Anyway the MSI info tab being non viewable isn't that big a hassel so if I can't fix it I should be able to live with it...
BBFN
Dave

Unable to boot with MSI X58 PRO-E and OCZ3P1333LV6GK

Hi,
This is my first post in this forum.
I've had this system for about 6 months, and from time to time I kept having instant reboots and once the PC would never start, I think I've sorted that by first flashing an old MB BIOS and then the most recent.
Tree days ago I've had another instant reboot, but now the system stops/reboots when the coloured animation starts to appear above the "Loading windows" message. This happens with both Win7 32 & 64 bits and even with the windows 7 installation DVD !!!
I think I've tried all combinations of the other posts where the MB+memory was the same as mine.
Another strange issue is: the memory PN shown inside the BIOS (OCZ3G1333LV2G) is different from the label on the memory (OCZ3G1333LV6GK)!!
I've already tested with only one memory chip at a time, the result is still the same.
I've only got connected the following: Video board, 1 RAM chip, USB Keyboard & one SATA HD. No over clocking whatsoever !
What else do I need to do to finally boot to windows ?
Thanks in advance for any help.
Paulo
My System:
Mobo: MSI X58 Pro-E, model MS-7522, version 3.1
BIOS: 8.B
CPU: Intel i7 920
RAM: OCZ3G1333LV6GK (6GB)
Video: Sapphire Vapor-X ATI RAdeon HD 4870 2GB
PSU: Combat Power CP 750W
OS: Windows 7 32 & 64 bits

Hi Henry,
Thanks for the help.
"What are your RAM timings? Screenshot of CPU-Z Memory tab and SPD tab."
I've added a few screenshots of the memory, the SPD & CPU-Z tab, plus a MEM86 test with only on memory stick installed. It appears that the memory is OK... or not ?
"Do you have another video card you can try? Those Sapphire Vapor-X cards have been a problem for others in the past."
I wasn't aware of any problems with this video card, I use it mainly to send movies to my big LCD TV through the HDMI port. I don't have access to another video card, sorry...
I don't know what else to do, do you think it's the PSU ?
Regards,
Paulo
--I made it so your images show and are clickable
--Mike

MSI-PRO-E Motherboard and OCZ3G1600LV6GK

I have been doing some research and am deeply confused. I am going to be buying a MSI Pro-E motherboard and am planning on buying OCZ Gold Ram (3 x 2GB). I was looking at the timings and am getting confused. Some people are saying you have to mess with the BIOS to get the timing to 8-8-8-24, and others are saying that you don't have to do anything. So I am wondering if you actually have to do anything in order to obtain the timing of 8-8-8-24? Also Can the motherboard run RAM at 1600Mhz without overclocking or would I have to overclock the RAM in order to get that speed?
Here are the links to the RAM and the Motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227365&cm_re=OCZ_RAM-_-20-227-365-_-Product
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130226&cm_re=MSI_PRO_E-_-13-130-226-_-Product

Quote from: Disloyalcarrot on 16-December-09, 07:48:50
Thanks for the reply. Sorry I forgot to mention that I am going to be using a I7 920 processor. Also I found a picture of the bios settings someone had and they were doing the second method you mentioned. I don't think it has more than 1 XMP profile, and if it does I'm probably not going to change it because I will be using the second method. So just to double check to make sure I'm not messing this up, I want to set it to 2N not 1N right? (Just checking cause I read somewhere that you usually leave it on 1N.)
Typically you will want to use 1N but some RAM won't be able to do it properly...
Something else you may want to consider: If you use 1333 mode instead of 1600 you won't have to increase voltage and often can use much better RAM timings. I've some 7-7-7-20 Corsair RAM in here but when I found out that in 1333 mode it runs with 4-6-6-15 without the requirement to increase the voltage, I was very happy to leave it at that. There are also other timings which can nicely be set manually - my tRFC is 49 instead of 88 now!
Something which may speak against using XMS info: My corsair RAM is a triple kit, but somehow one module has one value set differently than the others in there...thus I'm using manual setup now (tRFC was set much too high anyway, it wasn't even using XMS info).
Screet

Msi video card n240gt and n9800gt problems with output HDMI

Hello to all
I have a problem I just bought a new Video card because I needed HDMI output. The previous card I have is a BFG Ge Force 8800GT 512 DDR2 running @ 1920x1080p 60Hz which works perfectly the only downside is it does not have HDMI out with 5.1. Now i installed the n240GT 512 DDR5 and tried watching BD ripped to the HDD and playing them back all i get now it jerking lagging bad also and have horizontal red and green lines scattered across the screen.Which i did not have with my 8800GT card thinking its a bad card so i bought another card from another dealer this time its a MSI N9800GT 1gig DDR3 and still the same problem.I Checked the resolution and its set to 1920x1080P refresh at 60Hz,i also changed the Hz to 24Hz and it cleaned up the lines but not all and picture still jerky picture. I have a MSI K9N NEO V3 Motherboard and all drivers updated current Bios. l used a DVI cable 40ft long with my Ge Force 8800GT and every thing worked fine, once I installed the new MSI Video cards N240gt and N9800GT I have the above problems and using a 50FT HDMI cable. I have a Samsung PN50A550 with 3 HDMI inputs 1 has my BluRay player hooked up with HDMI running at 1920x1080P at 60Hz and crystal clear picture no problems, input 2 has my HD Bell receiver running at same specs as input 1 no problems I tried the other HDMI inputs from the Samsung TV from the HDMI out from the card same thing. It has to be the cards that can`t support the TV what else can it be if not the MSI cards. Please respond ASAP Thanks Thumpalong

http://www.overclock.net/t/936561/psu-rating
You may want to borrow and test with another PSU.
We always recommend Corsair and Seasonic
I can't find anything on Topower other than that opinion piece of linked... getting frustrated. Most of the time I can find detailed info on most psu's not this time, so best to borrow and test.
Assuming of course that the older VGA's worked fine.

Probems with msi 875p neo Fis2r and network controller driver

Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2800 MHz (14 x 200)
Motherboard Name MSI 875P Neo-FIS2R (MS-6758) (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Canterwood i875P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (10/11/04)
Partitions:
C: (NTFS) 238464 MB (200326 MB free)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version V2.4
Release Date 10/11/2004
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 200 MHz
Maximum Clock 4000 MHz
Current Clock 2800 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
Network adapters:
Direct Parallel 5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Quote from: Jack t.N. on 14-November-09, 08:00:05
Clear CMOS with your PSU unplugged from A/C power. Then load "Optimized Defaults" in BIOS and retest.
thanks jimi... jack
will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

MSI 4600Ti MSI clock and info tabs ....

Similar Messages

Maybe you are looking for