MSI 4670 Video Card and NVIDIA/ATI drivers on K8NGM2-FID

I installed an MSI R4670-2D512 video card yesterday and had a problem with drivers that I'd like to understand better.  What I did was uninstall all the NVIDIA drivers, install the board, install the ATI drivers, and update the ATI drivers (with reboots).  In the end, I had no LAN connection, and XP's hardware warnings (and Device Manager) showed no "Other PCI Bridge," "SM Bus Control," and "Video Controller."  Reinstalling drivers from the motherboard's CD got all those going again, but I'm wondering if that's created any underlying NVIDIA/ATI conflicts.  I've disabled GeForce 6150 under Display Adapters, leaving the 4670.  That covers the video controller, but should I do the same for the other two?  And should I have even needed any of the three?  Thanks.

Quote from: BOSSKILLER on 22-November-08, 03:56:04
"I've disabled GeForce 6150 under Display Adapters, leaving the 4670.  That covers the video controller, but should I do the same for the other two?  And should I have even needed any of the three?  Thanks."[/i]
Show us what you mean.
Actually, I misspoke: video controller and Display Adapters were in different categories.  What do you want to see?  Under Display Adapters, both the ATI 4670 and GeForce 6150 are listed.  I disabled the latter (right click, disable), so there's a red X through it now.  The three yellow '?' that were under Device Mgr > "Other Devices" are no longer there.  They were listed at the time under "Other Devices," but once those motherboard CD's drivers were reloaded they dispersed to other locations with new names and the Other Devices category disappeared.  I'm guessing one of those three is now called the "NVidia NForce Networking Controller," since when the problem arose there was only a "1394 Net Adapter" under Network Adapters.  I couldn't find the other two, hence I wouldn't know what to show you.

Similar Messages

  • Is there a known conflict between a CalDigit FASTA-GU3 sata/USB 3 card and an ATI Radeon X1900XT video card?

    Hello all.
    I am having trouble with my Mac Pro (circa 2008) not powering up the monitor (an Apple HD Cinema Display 23 inch).
    Here's some history.
    For about two weeks I was having trouble waking up the monitor from sleep. I would have to reboot the computer to see the screen.
    Then the screen wouldn't wake up after many reboots. I tried the Apple Cinema Display on my MacBook Pro laptop an on an older Mac Mini. The display didn’t' work on any of them.
    I then hooked up a Samsung monitor to all three computers in turn. The Samsung worked fine with each.
    From that I deduced that it was Apple HD Cinema Display that was at fault.
    I replaced it with one I bought from a friend - in perfect working condition.
    The new Apple Display worked fine with my Mac Pro.
    Problem solved - or so I thought.
    Now, a few days later, I am having a repeat of the same problem. The Apple Cinema Display won't wake up.
    I removed all the peripheral devices, still no joy.
    I removed and reseated the video card (after blasting all with compressed air).
    Still no joy.
    I then removed the CalDigit FASTA-GU3 sata/USB 3 card I installed about a year ago.
    Now the Apple Display came back to life.
    So my question is, are there know conflicts between a CalDigit FASTA-GU3 and an ATI Radeon X1900XT video card?
    If so - is there a fix?
    Also open to other theories.
    Other tech specs:
    Mac Pro (from around 2008) 2 x 3 GHZ Quad Intel Xeon.
    OSX Lion
    The video card is an ATI Radeon X1900XT (512 MB)
    Apple HD Cinema Display - 23 inch
    Many thanks.

    Thanks for the info on the Expansion Slot Utility. I found it and ran it. It shows no problems. It shows the ATI Radeon X1900XT to be properly installed and running at full capacity.
    I found a reliable dealer of flashed ATI Radeon 5770 cards. A couple of trusted friends have had good luck with cards from the dealer.
    So I will have that on stand-by for when/if the existing card fails completely.
    Thanks everyone for your input.
    A

  • My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

    My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

    http://discussions.info.apple.com/thread.jspa?messageID=12248238&#12248238
    http://discussions.apple.com/thread.jspa?threadID=2649035&tstart=0

  • 2 computers running windows-xp. niether will show video in itunes, only a black or a green screen. I went to video card and downloaded the latest windows drivers. All videos worked well after rebooting the drivers.2hours later the screen reverted to green

    i can down load videos to my iphone 4 and play them. I ONLY GET A BLACK  OR GREEN SCREEN AND NO VIDEO USING WINDOWS XP  SP3 .
    I UPDATED THE WINDOWS DRIVERS  FOR THE VIDEO CARD AND EVERYTHING WAS WORKING FINE FOR 2 HOURS. NOW i AM BACK TO THE SAME GREEN SCREEN PROBLEM AND NO VIDEO.
    VIDEO ON YOU TUBE WORKS FINE. IS ANYONE KNOWLEDGABLE IIN THIS AREA?

    Hello, Glenn,
    This forum is really intended for those who are managing iTunes U sites, not for problems with using iTunes U content, per se. You'll probably get more help if you ask in the general iTunes forums:
    iTunes for Windows
    Regards.

  • When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

    when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

    Hi fabiangs,
    I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
    What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
    I look forward to hearing back from you.
    Best,
    Sara

  • After installing MSI GTX980 Video Card PC won't shutdown completely (Windows 7 S

    Hi all,
    I'm posting this here because it started post video card install.
    After installing a new MSI GTX980 Gaming video card install into my Windows 7 PC it won't shut down completely, monitor and keyboards all turn off but fans keep spinning and LED light on  vid card also remains on.
    It's also happening in safe mode, it also won't shut down from login screen, a Restart however works fine.
    Didn't have problem with previous card EVGA GTX780.
    Motherboard is a Z77 AsRock Extreme 9 with latest bios (1.90).
    Have reset Bios to defaults and updated Windows
    Using latest Nvidia Drivers 344.16
    Unfortunately can't test with other card as I no longer have it.
    Given it's happening in SafeMode I'm inclined to think it more hardware related then software.
    Not sure what else to try.
    Other than the above the new video card has been running flawless.
    Thanks

    Thanks for reply it appears the problem isn't related to new card thankfully as I tried another vid card and onboard vid and problem persisted.
    Sleep doesn't work either, actually both the sleep and hibernate options are greyed out in Windows.
    I scanned PC for malware and restored it to last know working point, no idea whats happened but I suppose I won't know outright if its software or hardware without a clean install.
    Specs:
    AsRock Z77 Extreme 9 motherboard
    Corsair HX PSU
    MSI GTX980 Gaming Vid card
    OSZ 256 SSD
    8GB RAM 2133Mhz
    Quote from: JLio01 on 13-October-14, 15:41:08
    Did you try to unplug your video card and see if the problem remains? Does sleep(S3) mode work fine? What's your specs?

  • Video Card and PSU upgrade for HP pavilion p6310y?

    Hello,
    I am a mild gamer and I would like to upgrade my video card so I could play games like minecraft and maplestory without my frame rate dropping every 5-10 min.  When this happens it sounds like the fan in my computer is working really hard and the game is almost unplayable.  I also play a few games from steam such as Gmod and Borderlands, however the games that seem less graphic intensive give me more problems. 
    Should I and am I able to upgrade the video card and psu for this HP pavilion p6310y?  or possibly get a better card for these game without upgrading psu?
    Processor is Quade core AMD Athlon II X4 630 / 2.8 GHz
    6gigs of ram
    1 tb harddrive
    NVIDIA GeForce 9100
    300 watt power supply
    Windows 7 64 bit
    Any help would be much appreciated!

    Hi,
    Yuo might try updating the video driver from the NVIDIA web site.
    Your PC has a 300 watt power supply.  If you don't need DirectX 11 (used for better detail in newer games), then the NVIDIA GT 240 1GB or 512 MB DDR5 is about tops for a 300 watt power supply.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Mac Pro Locked Up and Now  One Video Card and Audio Not Working

    Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was the monitor and that was not the problem.
    I tried doing a formal shutdown after the restart and this also did not clear up my problem.
    Everything was working fine prior to the lockup. Any suggestions would be much appreciated.

    If you've added RAM and are using the nVidia 9400m video driver, you may be using incompatible RAM
    http://www.nvidia.com/docs/IO/60555/MemoryCompatibility_List_DA-04576-001v01.pdf
    My wife's MB is locking up when watching videos; hulu, iTunes, VLC. The above is the only answer I've found.
    BOL

  • Upgrade video card and power supply or upgrade my pc?

    I have a :
    HP
    Series Pavilion Model M8530F(KT334AA) Type Media Center / HTPC Processor AMD Phenom X4 9550(2.2GHz) Processor Main Features 64 bit Quad-Core Processor Cache Per Processor 4 x 512KB L2 Cache Memory 5GB DDR2 800 Hard Drive 750GB 7200RPM SATA Optical Drive 1 SuperMulti DVD Burner with LightScribe Technology Graphics NVIDIA GeForce 9300GE with Hybrid SLI Technology with 256MB dedicated video memory, DVI and HDMI capabilities, and support for Microsoft DirectX 10. Up to 1919MB Total Available Graphics Memory as allocated by Windows Vista Audio High Definition audio Ethernet Integrated 10/100/1000Mbps network interface Keyboard HP multimedia keyboard Mouse HP optical mouse Operating System Windows Vista Home Premium 64-bit Software Included Photo and Video
    muvee autoProducer Basic: Automatically create professional looking home videos and burn to DVD
    Entertainment
    Cyberlink DVD Suite Deluxe: Automatically fix and edit videos and create CDs and DVDs. Edit, burn and archive data to discs.
    Productivity
    Microsoft Works 9: Includes a word processor, spreadsheet, database and calendar
    Microsoft Office Home and Student Edition 2007 Trial: 60-day trial version
    Adobe Reader 8: Read and print PDF file
    PC Security
    Norton Internet Security 2008: Protect your PC out of the box (60 days of complimentary live updates)
    Online Services
    Easy sign-up to major dial-up and broadband Internet Service Providers:
    - MSN dial-up (offer included)
    - NetZero Dial-Up (offer included)
    - NetZero Accelerated Dial-Up (offer included)
    - Juno Turbo Dial-Up (offer included)
    - High Speed Internet Services Comparison Shopping
    Motherboard Chipset NVIDIA GeForce 8200 Chipset
    CPU CPU Type Phenom X4 Installed Qty 1 CPU Speed 9550(2.2GHz) L2 Cache Per CPU 4 x 512KB CPU Socket Type AM2+ CPU Main Features 64 bit Quad-Core Processor
    Graphics GPU/VPU Type NVIDIA GeForce 9300 GE Graphics Interface PCI Express x16
    Memory Memory Capacity 5GB DDR2 Memory Speed DDR2 800 Form Factor DIMM 240-pin Memory Spec 2GB x 1 & 1GB x 3 Memory Slots (Available/Total) 0/4 Maximum Memory Supported 8GB
    Hard Drive HDD Capacity 750GB HDD Interface SATA HDD RPM 7200rpm
    Optical Drive Optical Drive Type DVD Super Multi Optical Drive Spec SuperMulti DVD Burner with LightScribe Technology
    16x DVD±R, 8x DVD+RW, 6x DVD-RW, 8x DVD+R DL, 4x DVD-R DL, 5x DVD-RAM, 16x DVD-ROM, 40x CDR, 32x CDRW, 40x CD-ROM
    Audio Audio Chipset Integrated
    Communications Modem 56K LAN Chipset Integrated LAN Speed 10/100/1000Mbps
    Front Panel Ports Front USB 2 Front IEEE 1394 1 Front Audio Ports 2 Card Reader Front panel 15-in-1 memory card reader: supports SmartMedia, xD, MultiMedia Card, Secure Digital (SD), Mini Secure Digital, Compact Flash I, Compact Flash II, IBM Microdrive, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo, RSMMC, MMC Mobile, MMC+
    Back Panel Ports PS/2 2 Video Ports 1 DVI, 1 HDMI Rear USB 4 Rear IEEE 1394 1 RJ45 1 port Rear Audio Ports 6 ports S/P DIF 1 port
    Expansion PCI Slots (Available/Total) (2/3) PCI-E x1 slots
    (0/1) PCI-E x16 slot
    Mouse Mouse Type HP optical mouse
    Keyboard Keyboard Type HP multimedia keyboard
    Physical Spec Dimensions 16.54" x 15.16" x 7.60" Weight 32.00 lbs.
    Manufacturer Warranty Parts 1 year limited Labor 1 year limited
    Sorry for the long copy and paste. I read that I can upgrade the video card and power supply. But atm when I play world of warcraft at ultra settings, I tend to lag really bad in the new instances with the new cat expansion that came out. I wanted to know if I should upgrade the video card and power supply for better performance or just upgrade my whole pc tower.  Fyi, I am running a Acer X243w lcd flat panel monitor if that helps too.

    My brother has a high end laptop with a built in, high end gaming video card (I forget which one). He's able to run the game on full-on Ultra. 
    I have an integrated video card which games the game on.. 'cartoon'.. mode. It's lower then low. When someone shoots a powerful spell at me, I go into a DOS Prompt. (not really, but it's pretty bad).
    Funny thing is, I can still kick my brother's butt in any PVP match he wants to set up. 
    But I guess his graphics are pretty....
    As for which video card works best, I'd have to do some research. After that graphics update they did with CAT,  it's kind of a toss up again.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
    Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
    Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
    Any help is greatly appreciated, thanks.

    It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
    There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Msi r6450 video card won't work

    just received a new video card and for whatever reason, my pc won't see it.  it's the msi r6450 md1gd3 card.
    I've got an older gateway desktop with 1pci express slot.
    as near as I can tell, the mb is a c51pvgm.  it's a model 5220 gateway machine using an amd athlon x2 chip 3800+. it has nvidea onboard 6150le processor.  using winxp sp2. 
    bios is set to recognize the pciexpress slot first.  fan comes on within the card but it is not being recognized in the device manager.
    thoughts?
    Thanks

    We can't support Gateway machines but just MSI stuff. Make sure it is not PCI-E 1.x as a six series Radeon and later PCI-E 2.1 and above card wouldn't work then. To be sure the vga is working test it in another machine

  • What is the best PC platform for LR 4? Especially optimum video card and amount of RAM?

    I have a high end i7 Windows 7 64bit PC with 12GB ram and 3TB disks - some in RAID 0, yet LR sliders lag and image scrolling/rendering can take up to 5 seconds, which makes editing hundreds of images in a session a pain.
    I am using an ATI Radeon video card and 27" monitor (2560x1440). I am prepared to buy any graphics card or even switch to an iMac, but want snappy LR performance.
    What is the recommended setup, please?

    Running LR in a window, approx 1400 x 900 made the sliders responsive and smooth!
    My system drive, which is also the LR Catalog is RAID 0 and is 250MB/sec access, which is as good as I can get with SSD
    I have an AT Radeon HD4800 video with latest driver
    I am running LR 4.1 RC2
    I have tried exiting all non-essential programs, including AV (with internet disconnected) - made no difference
    How much would I spend on a video card upgrade? Up to $750, however from what I am reading, LR doesn't use GPU acceleration so this is a waste of time and money.
    I am going to try my i-7 MacBook Pro, driving the 27" monitor, as a comparison, and report back.
    Thanks for all the responses so far. If you can add anything, please do so.
    Are there any configuration guidlines to make LR quicker, anywhere?
    My other band-aid is to manually transfer my project's raw files to the HDD, and then pre-view them with a fast browser, to weed out the rejects, before importing the rest into LR for editing and filing.
    I looked some good programs, for this:
    PhotoMechanic ($150)
    Seems to be the ultimate, and is both Mac and Windows, however price is difficult to justify.
    Breeze Browser Pro ($70)
    Fast but pricy compared to LR with all its features, but may be a goer, considering the time it saves.
    Fast Picture Viewer ($40 + $10 for code pack)
    Also very fast, but no tree folder view, which I find limiting. Price is getting better.
    XNView (Free)
    Good option. Bit slower than the paid apps, but still quite good.
    FastStone Image Vewer (Free)
    Comparable to XNView, just a tad slower, but seems that development has been suspended. I did see a 64bit codepac though, which I hadn't look ed at.
    There are too many more to list. Do any of you guys use anything like this?

  • Multiple Video Cards and FCP

    I'm looking at getting a mac pro, and I'm wondering if there is any point to getting multiple video cards (2x NVIDIA GeForce GT 120 512MB).
    I've been editing in FCP on a G5 for years now, and only had one video card.
    Does the current version of FCP7 utilize them? Or does any of the other Studio software utilize them?
    And if FCP7 does take advantage of multiple cards, where am I going to notice the difference if I add multiple cards... rendering? exporting? playback?
    Any advice would be great!

    We see this topic in various forms about weekly.
    FCP does not use multiple cards. In fact, FCP really doesn't take advantage of a single card's GPU. But Motion does, which means if you have .motn files in your FCP project, you may see some kind of boost.
    I don't know anything about the 120 but, personally, I will never buy another nvidia card. The minimum for Motion would be the Radeon 4870.
    FCPv5 and v6 had issues with some FxPlug filters supplied with Motion if you had multiple monitors plugged into multiple cards but not of you had multiple monitors plugged into a single card. This got fixed in FCP7.
    bogiesan

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • Looking to upgrade the video card and power supply in the K330

    Hello, I'm looking to upgrade the power supply and video card in the Lenovo IdeaCentre K330 but I need to know if these parts will be accepted by the mobo.
    Here's the card name (no link, don't know if theres a restriction to off site links) ASUS 2GB GDDR5 DIGI+ VRM technology Graphics Cards HD7770-2GD5
    The power supply name follows: Xion High Performance 1000 Watt ATX Power Supply XON-1000P14F
    Thanks for reading, and extra thanks for a good reply

    Thanks for replying, I have looked into other PSU's and came up with this: XFX PRO750W Core Edition 80+ Bronze ATX 750 Energy Star Certified Power Supply
    Feedback? And main question is, will they both (video card and PSU) be compatible with the motherboard that come standard in the K330?
    I don't really have a need for the front panel except the power, and backontrack buttons.
    Also, the reason why I'm getting a high wattage PSU is because I might later decide to build my own PC with the upgraded parts, and put the old parts back into the K330

Maybe you are looking for