MSI 52x CDROM behave like that!

When I insert MSI Motherboard Driver CD to my MSI 52x CD Drive to install new system, it's OK. But take a little time, CD Drive is spinning louder and stop reading. I eject that CD and reinsert, prompt insert a CD. I try to insert other CDs, the same reply. Is it gone? Help me.

OK... let's verify if this CD-ROM is actually working or not. Get a Windows 98 boot disk and boot yourself into DOS with the generic CD-ROM driver installed. Pop n any CD (e.g. Windows 98 CD) in the drive, and see if DOS can read it. If it can't read it, then you might want to return it for RMA.

Similar Messages

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

Kt333 Ultra 2 + Msi 52x Cdrom = Problems

im running the kt333 ultra 2 mother board, and have bought an msi starspeed 52x cdrom, problem i am having is that when it boots up, and scans the Ide's it throws out a bunch of ascii characters for the cdrom, in the bios, if i set that sec ide master to cd/dvd it wont find one, if i let it auto detect, it shows the strange ascii art. any ideas why to msi products wont work together?

HI sanityloss,
Can you list out your IDE devices such as :
IDE 1 master : ......
IDE 1 slave : ....
IDE 2 master : ....
IDE 2 slave : ...
(RAID) IDE 3 , IDE 4... etc
Also, tell us how you connect the IDE cable(s). Is it 80-conductors or 40-conductors type? Blue header on the motherboard?
And also how do you set the jumpers on all the drives, Master, Slave, or Cable Select?
Your issue here might be something wrong with all these settings, such as wrong cabling, wrong jumper settings, etc.
Please give us the information so we can sort this out.

How do I create a title, that behaves like a button?

Hi,
I'm using XML to load data from asp to flash. Here's the XML
example:
1. <?xml version="1.0" encoding="iso-8859-1"?>
2. <news>
3. <item>
4. <headline>Flash XML Based News reader out
today!</headline>
5. <date>05/09/1986</date>
6. <message>Today my new xml based flash news reader
came out, I am so excited!</message>
7. </item>
8. <item>
9. <headline>One day until the Flash XML Based News
reader is out!</headline>
10. <date>05/08/1986</date>
11. <message>Tomorrow my new xml based flash news
reader comes out, I am so excited!</message>
12. </item>
13. <item>
14. <headline>Two days until the Flash XML Based News
reader is out!</headline>
15. <date>05/07/1986</date>
16. <message>The day after tomorrow my new xml based
flash news reader comes out, I am so excited!</message>
17. </item>
18. </news>
And here's the ActionScript part:
1. // Initialize the xml object that our news will be loaded
into
2. var news_xml : XML = new XML();
3. // ignore all whitespaces inside of our xml file
4. news_xml.ignoreWhite = true;
5. // when the xml recieves a return from the load() function
call, execute this function
6. news_xml.onLoad = function( success : Boolean ) {
7. // if the xml file was successfully loaded
8. if ( success ) {
9. parseNews(this);
10. }
11. }
12. // call the load function on the xml object, passing in
the url of your xml file
13. news_xml.load("xmlTutorial.xml");
14. // this function will take our news xml object and parse
it
15. function parseNews( _xml : XML ) : Void {
16. // first we create an array that holds all the values of
the item nodes
17. var items : Array = _xml.firstChild.childNodes;
18. // now we want to iterate over every item in the items
array
19. // and parse the nodes as we see fit
20. for ( var i : Number = 0 ; i < items.length ; i ++ ) {
21. // here we set the text of the text field ( news_txt )
22. // the first thing we add to the textfield is the
headline then a line break
23. news_txt.htmlText += "" + items
.childNodes[0].firstChild +" ";
24. // next we add the string date followed by the date value
in the xml file
25. news_txt.htmlText += "Date: " +
items.childNodes[1].firstChild + " ";
26. // now we add the message, then two line breaks, only for
formatting
27. news_txt.htmlText += " " + items
.childNodes[2].firstChild + " ";
28. }
29. }
So far is everything clear to me. But what I want to do now
is that after a user clicks on title, next happens:
the current swf unloads
the flash sends data to asp (ID of an article and ID of an
author, which movie to load next).
How do create a title/button?I know how to make a title to
behave like a link (just add the
http://... in the headline tag in XML
document. But this,..... I just don't know how to do that.
THX for any help

2m, you are right. I should tell you about my concept. It's
all on the paper yet, because this is how I work - first I write
down everything on paper, study it and the next step in trying to
make it work on computer.
I have a main swf, I call it system.swf. System.swf receives
the info about the swfs, it must be loaded from html tag
<object><param>. The ID of the movies is send from
flash to asp and then via <object>back to flash. Does that
make sense? Is there a better way for that?
So, the system.swf is loaded for the whole time - let's say
it on level1. On level 2 are then loaded other swfs.It depends
which content the user wants to see.
About the article part:
first the user sees the list of last articles (title, date
and short description). When he/she clicks on the title, all the
action happens:
flash sends the data which article the user wants to read to
asp, asp searches in data base for the requested article and
creates xml, where are title, date and the whole content of the
article.
At the same time asp also sends via <object>tag in html
the id of the swf that must be loaded and the id of the author of
the article, so the swf, where the pictures of the all authors are,
will know what picute must load (this is the second swf that is
loaded on the article part - it's created like a gallery; the
author of the active article is bigger and if the user wants to
read the last article of other author, he/she just closes the
picture and then the images are moving in a slider way and when
he/she clicks on an image, it get larger and the last artcle of
this author is loaded).
And I wonder how can I make this all to happen: when the user
clicks on a title, all the var action happens?
If you have better idea how to create this, please, advice.
THX for the help so far

How to drag and drop a swing component that can make it behave like Visio.

1) How to make a JComponent drag and drop that behave like visio? I understand it's possible to drag and drop a text or image, but no idea on how to do that on JComponent. 2) After the JComponent is dragged and dropped, how to make the JComponent to be able to resize by the user using mouse 3) The area that the JComponent dropped should it be GrassPane, LayerPane, or ContentPane?

I see where you're going. I'm drawn to Thunderbird because it puts open emails in separate tabs, which makes finding a particular open message easier than searching the task bar for an open outlook message. I do see your point that tab happy programmers, probably too young to remember how cool we thought drag and drop was when it first came out, don't think much of it. As with a lot of software, each programmer has a very limited view of how it their program should be used vs how it is actually used in the wild.
People work in different ways. When I schedule an appointment with a client, this is often preceded by a series of emails related to whatever the client wants to discuss. I drag and drop those messages into the appointment window so that on the date of the appointment, I have a nice neat summary of the issues right there in the appointment window. I could use workarounds (save email and then attach to the appointment), but that's like a trip back to Windows 3.0 and it's, if I'm not mistaken, 30+ years later. I guess I'll continue to use Tbird for email and outlook for calendar, not my preferred solution, I'd like to flip MS the bird and cut all ties to outlook, and was hoping Tbird was the solution. Not yet, and perhaps not ever, based on your thoughts.

Im tryting to install new itunes but says windows installer, you are tring to use is a network resource that is unavailable. find folder itunes.msi i dont have a folder like that and anything i use that is related does not work. help me?

"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.

Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I have updated my iOS to 4.3.5.... And after that my 3gs iPhone still behaving like previous. Versions of iOS....... My iPhone. Showing no new feature which apple has added to iOS 5 like icloud , imessage... Should I update it again...?

I have updated my iOS to 4.3.5.... And after that my 3gs iPhone still behaving like previous. Versions of iOS....... My iPhone. Showing no new feature which apple has added to iOS 5 like icloud , imessage... Should I update it again...?

anshulmajoka wrote:
I have updated my iOS to 4.3.5.... And after that my 3gs iPhone still behaving like previous. Versions of iOS....... My iPhone. Showing no new feature which apple has added to iOS 5 like icloud , imessage... Should I update it again...?
iOS 4.3.5 is not the same as iOS 5. iOS 5 with the new features you list has not been released.
Stedman

I want to create a tail that behaves like a string

I want to create a tail and fasten one end to an object. The object is translating and has a small amount of rotation oscillation. I want the tail to behave like a string that has very little stiffness. It should curve from side to side as the object oscillates. I could probably figure this out by experimentation but I would much appreciate assistance.

Well, I don't know what you mean by "the object is translating", but to make a tail that behaves with a lot of curve, it needs to be comprised of segments. I would go with a replicator of a bunch of circles and then use the replicator sequence behavior to animate the curvature.
Andy

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

How do I get my Gmail account to behave like a POP account???

Ok, I've been using gmail as a POP account on my Mac for a while. Just got my first iPhone (3Gs). I synced it and set it up and everything was hunky dory. Then I decided to try out IMAP so I made a new IMAP account for my Gmail and disabled the POP account in Mail and removed it from the iPhone. After trying that out I realised I prefer to use POP. So I deleted the IMAP account from both Mac and iPhone... But when syncing my old POP account it behaves like an IMAP account on the iPhone... It doesn't have the same settings as my other non-gmail POP accounts... and loads all the folders from gmail... I have disabled IMAP in my Gmail account too... Still the iPhone seems to refuse to add a gmail account as anything but IMAP? I've even restored my iPhone to no avail...
Now if I delete a mail on the phone it never gets to my computer and I wanna be able to delete stuff from the phone without affecting the computer... gah!
Any suggestions?
< Edited by Host for language >

I gave in and am now using IMAP but I still find the behaviour a bit wierd...

My 13" Mac Pro behaves like everything is in slow motion. Takes forever to do anything, on or offline. Would this be a software conflict or a hardware problem?

My 13" Mac Pro behaves like everything is in slow motion. Takes forever to do anything. Wondering if this is a software issue or a hard drive problem?

Maybe some maintenance will help:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

.indd file behaving like an .indl file.

One of my .indd files is behaving like an .indl file. Anyone know how to get my .indd file back? The .indd file opens as if it is a library instead of a document.

That looks normal enough. Just this one file giving you trouble?
There are two things we could try next. First would be Replace Your Preferences. Next would be trying to open on another machine and do a Save AS and see if it can be cleaned up. Maybe even, if it opens properly on another system, try Remove minor corruption by exporting before bringing it back to your Mac.

MBP 2011 - Best way to make it behave like Mac Mini ?

I have a 26" NEC monitor I like and use for photo editing. I come from the Windows world. Late last year I bought a Mac Mini, hooked it up to my monitor and was getting used to OS X. Then my mini was stolen.
I recently replaced the stolen mac-mini with a 2011 13" MacBookPro i7 2.7, thinking I could hook it up to my NEC monitor like the mac mini, but I'm finding it's not really like that. It's more of a dual display setup that I'm finding awkward.
How can I make the external monitor be the main screen with dock and menu bar ?
Display settings are kind of primitive in this regard.
I can drag firefox from the MBP screen to the external screen, but the menu bar stays on the MBP. It's kinda weird. Moving the mouse back and forth isn't so fluid due to vast difference in resolution between the two screens.
Then there's the battery issue. If I leave the AC plugged in all the time, I read that isn't a good thing for battery life. It is however, convenient once in a while to pickup the MBP and carry it about the house.
What's the best way to make the MBP behave like a mini?

Thank you for the KB article, it helped.
The key is to have the power AC adapter plugged in on the MBP. Then, when it wakes from sleep after closing the lid the attached display becomes the one and only display with Dock and Menu bar up top. Otherwise, in battery mode, wake from sleep is a complete disaster. This clamshell mode seems to be very stubborn in battery mode. It wakes up, monitor flickers, goes back to sleep. Press a key to wake it up again and it just keeps going in a circle, like ground hog day and I never get to actually use the MBP.

'Darken' behaves like 'Multiply' in CMYK mode

In RGB documents, the 'Darken' transparency blend mode doesn't change colours, but only shows a colour if it is darker that the colour underneath it.
In CMYK documents, 'Darken' acts differently. It does the same thing as 'Multiply': it darkens the top colour based on the colour underneath. In CMYK mode, 'Darken' and 'Multiply' seem to do exactly the same thing.
How can I get an object in a CMYK document to do what 'Darken' does in an RGB document - only show if it has a darker value than the colour underneath?
(side question: why does 'Darken' behave like 'Multiply' in CMYK mode? What's the point of having two different blend modes that do the same thing?)
Here's Adobe's official description of Darken. This matches how it behaves in RGB, but not how it behaves in CMYK:
Darken
Selects the base or blend color—whichever is darker—as the resulting color. Areas lighter than the blend color are replaced. Areas darker than the blend color do not change.

Okay, so these two shapes (white stroke, solid fill) with 'Darken' blend mode look like this in RGB mode, which matches the description and expectations:
...but they look like this with 'Darken' blend mode when we switch to CMYK.
Looking at it more closely, it seems like it might be something to do with the different seperations: in the RGB example the overlap area isn't exactly the same as the normal blue as I thought it was at first.
It's also not always exactly the same as multiply as it was the first couple of times I tested: multiply seems to often blend darker.
So is there anything that simply only shows the darker of the colours?

Delete datagridview row using right click context menu does not behave like the delete key

I have a datagridview with editing enabled. If I click the row header and press the delete key, the row is removed no questions asked. I don't recall doing any coding to make this happen but I couldn't do copy and paste using keys so I created a context
menu with copy, paste, & delete. The delete option calls
dgvVX130.Rows.RemoveAt(dgvVX130.SelectedRows[0].Index);
The row is removed but the problem is this fires other events like RowValidating which fails. I presume because the row is no longer there.
The delete keypress is definitely a lot cleaner so my question is 3fold.
1) Why doesn't Rows.RemoveAt behave like the delete key?
2) Is it possible to issue a delete keypress to do the same thing?
3) Is it possible to suppress the RowValidating event or other events when Rows.RemoveAt is fired?

Interesting. My delete key does not fire the row validating event. When I use the delete key I click on the row header which does fire the row validating event and then I press the delete key. Row is deleted and no event fires. Works
just the way I want it to. I wish my context menu delete worked that way. I wouldn't know what chunk of code I can provide to show the Row Validating NOT firing when delete key is pressed but here is the context menu code that does fire Row Validating.
private void cmsEditItemClick(object sender, ToolStripItemClickedEventArgs e)
ToolStripItem item = e.ClickedItem;
switch (item.Text)
case "Copy":
if (dgvVX130.GetCellCount(DataGridViewElementStates.Selected) > 0)
try
// Add the selection to the clipboard.
Clipboard.SetDataObject(
dgvVX130.GetClipboardContent());
// Replace the text box contents with the clipboard text.
catch (System.Runtime.InteropServices.ExternalException)
MessageBox.Show("The Clipboard could not be accessed. Please try again.");
break;
case "Paste":
if (Clipboard.GetDataObject().GetDataPresent(DataFormats.Text) == true)
ClipboardUtils.PasteFromClipboard(dgvVX130);
dgvVX130.NotifyCurrentCellDirty(true);
dgvVX130.EndEdit();
dgvVX130.NotifyCurrentCellDirty(false);
bindingSource1_PositionChanged(this, e);
break;
case "Delete":
dgvVX130.Rows.RemoveAt(dgvVX130.SelectedRows[0].Index);
break;
default:
//code
break;
private void dgvVX130CellContentClick(object sender, DataGridViewCellEventArgs e)
//dgvVX130.IsUserSelectionEnabled = true;
dgvVX130.BeginEdit(false);
((TextBox)dgvVX130.EditingControl).SelectionStart = 0;
//((TextBox)dgvVX130.EditingControl).SelectionLength = 3;
public class ClipboardUtils
public static void PasteFromClipboard(DataGridView grid)
try
char[] rowSplitter = { '\r', '\n' };
char[] columnSplitter = { '\t' };
// Get the text from Clipboard
IDataObject dataInClipboard = Clipboard.GetDataObject();
string stringInClipboard = (string)dataInClipboard.GetData(DataFormats.StringFormat);
// split into rows
string[] rowInClipboard = stringInClipboard.Split(rowSplitter, StringSplitOptions.RemoveEmptyEntries);
// get current cell
int currentRow = grid.SelectedCells[0].RowIndex;
int currentColumn = grid.SelectedCells[0].ColumnIndex;
// get 1st cell in selected area
for (int i = 1; i < grid.SelectedCells.Count; i++)
if (currentRow > grid.SelectedCells[i].RowIndex)
currentRow = grid.SelectedCells[i].RowIndex;
if (currentColumn > grid.SelectedCells[i].ColumnIndex)
currentColumn = grid.SelectedCells[i].ColumnIndex;
// add more rows if need to paste data
/* if (grid.Rows.Count < rowInClipboard.Length + currentRow)
grid.Rows.Add(rowInClipboard.Length + currentRow - grid.Rows.Count); */
// paste
for (int iRow = 0; iRow < rowInClipboard.Length; iRow++)
if (iRow + currentRow < grid.Rows.Count)
string[] cellsInRow = rowInClipboard[iRow].Split(columnSplitter);
for (int iCol = 0; iCol < cellsInRow.Length; iCol++)
if (grid.ColumnCount > currentColumn + iCol)
DataGridViewCell currentCell = grid.Rows[currentRow + iRow].Cells[currentColumn + iCol];
if (!currentCell.ReadOnly) // H.NH added to avoid Read only case.
if (cellsInRow[iCol] == "")
if (grid.Columns[iCol].ValueType.Name == "String")
currentCell.Value = null;
else
currentCell.Value = DBNull.Value;
else
currentCell.Value = cellsInRow[iCol];
switch (iCol)
case 3:
currentCell.Value += "_ChangeColumnName";
break;
case 2:
currentCell.Value = grid.Rows[iRow].Cells[iCol].Value;
break;
else break;
catch (Exception e)
MessageBox.Show("Sorry, can not paste from the clipboard.\nError: " + e.Message, "Paste Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

MSI 52x CDROM behave like that!

Similar Messages

Maybe you are looking for