Msi 550 pro remote and hip software

I just got bgpvr up and running yesterday. It works great.
The msi remote will work within the gbpvr software musing a 3rd party interface called hip. I downloaded the first option software with plugins set the software for MCE remote and everything works just fine within gbpvr.
http://www.byremote.com.au/downloads/?SCLASS=HIP
Evan

I bought the MSI Theater 550 hoping that it would support PAL. But its not working.
Check this topic.
https://forum-en.msi.com/index.php?topic=113225.0
The image is highly distorted. This is very bad from MSI side. If it doesnt support PAL they should not have mentioned it. The site clearly says it supports both. Also on the box of the card it doesnt say anywhere if its NTSC or PAL version.
Someone from MSI please confirm. ATI website it shows theatre can support both pal and ntsc depending on the manufacturer.

Similar Messages

Unable to boot with MSI X58 PRO-E and OCZ3P1333LV6GK

Hi,
This is my first post in this forum.
I've had this system for about 6 months, and from time to time I kept having instant reboots and once the PC would never start, I think I've sorted that by first flashing an old MB BIOS and then the most recent.
Tree days ago I've had another instant reboot, but now the system stops/reboots when the coloured animation starts to appear above the "Loading windows" message. This happens with both Win7 32 & 64 bits and even with the windows 7 installation DVD !!!
I think I've tried all combinations of the other posts where the MB+memory was the same as mine.
Another strange issue is: the memory PN shown inside the BIOS (OCZ3G1333LV2G) is different from the label on the memory (OCZ3G1333LV6GK)!!
I've already tested with only one memory chip at a time, the result is still the same.
I've only got connected the following: Video board, 1 RAM chip, USB Keyboard & one SATA HD. No over clocking whatsoever !
What else do I need to do to finally boot to windows ?
Thanks in advance for any help.
Paulo
My System:
Mobo: MSI X58 Pro-E, model MS-7522, version 3.1
BIOS: 8.B
CPU: Intel i7 920
RAM: OCZ3G1333LV6GK (6GB)
Video: Sapphire Vapor-X ATI RAdeon HD 4870 2GB
PSU: Combat Power CP 750W
OS: Windows 7 32 & 64 bits

Hi Henry,
Thanks for the help.
"What are your RAM timings? Screenshot of CPU-Z Memory tab and SPD tab."
I've added a few screenshots of the memory, the SPD & CPU-Z tab, plus a MEM86 test with only on memory stick installed. It appears that the memory is OK... or not ?
"Do you have another video card you can try? Those Sapphire Vapor-X cards have been a problem for others in the past."
I wasn't aware of any problems with this video card, I use it mainly to send movies to my big LCD TV through the HDMI port. I don't have access to another video card, sorry...
I don't know what else to do, do you think it's the PSU ?
Regards,
Paulo
--I made it so your images show and are clickable
--Mike

Why is there a big difference in price for the Adobe Acrobat Pro 9 and other software???

I am looking at selling the ADOBE PRO 9 range of software but i am confused as to why one is selling at £20 and another at £200. The packaging is exactly the same and they look the same, so can anyone tell me why this is?? I had a customer asking me was it a student version or a full retail version and did it have a licence?? Do you get a licence with the cheaper version?? I will be very grateful if you could explain why the prices are so different.
Allison

One, you are in the COMPLETELY wrong forum for Acrobat... click the Adobe Forums link above-left and choose Acrobat from the list
Two, if you are selling software, you need to ask Adobe the price you should charge... and be careful you do not buy your stock from China, since it is most likely a pirate version
The SPACE here is provided by Adobe for users to help each other, but this is NOT Adobe support

MSI X58 Pro Overlocking and Voltages

Hi guys new here in the forums i would like to seek assistance or some bios pics in overclocking Intel Core i7 920/MSI x58 Pro 3.2GHz-3.8GHz. what would be the correct voltage for the ICH and IOH(on default values and for the above-mentioned speeds). your help is much appreciated thanks in advance

Disable Spread Spectrum & Extreme Memory Profile in bios Cell Menu. Disable Overspeed Protection in bios Advance Bios Features-CPU Features. Since RAM speed increase with base clock increases, you will have to 'experiment again to get the RAM stable. Set Mem. Ratio to 5, Uncore Ratio to 12, adjust DRAM, voltage & timings accordingly, set base clock to 166 or 167, leave all voltages (other than your RAM), on default. This should give you around 1660 RAM speed & 3.33G's, with Turbo, around 3.5G's .

MSI Theater 550 Pro - NTSC and/or PAL ??

I've read at most places the card supports both NTSC and PAL..but on www.msi.com.tw (global site), it claims the card supports only NTSC, and PAL support is arriving 'soon'!
Please let me know! I want to buy the card from Amazon.com - maybe a little more expensive here than most places, but I need it to be shipped internationally - South Africa, i.e. (and not just to the US). And yes, Amazon do claim the card supports both NTSC and PAL.
thanks in advance.

I bought the MSI Theater 550 hoping that it would support PAL. But its not working.
Check this topic.
https://forum-en.msi.com/index.php?topic=113225.0
The image is highly distorted. This is very bad from MSI side. If it doesnt support PAL they should not have mentioned it. The site clearly says it supports both. Also on the box of the card it doesnt say anywhere if its NTSC or PAL version.
Someone from MSI please confirm. ATI website it shows theatre can support both pal and ntsc depending on the manufacturer.

MSI 8348 CD-RW and Adaptec software

Can anyone help me out? I have fitted an MSI 8348 CD-RW drive. Its installed on the same IDE cable as the other CD drive, but set as master. I have loaded up the Adaptec Easy CD Creator 4.0 and direct CD 3.0. When I reboot and windows has launched, the little icon in the bottom right of the screen is indicating that there is no supported CD-R/RW drive supported. Anyone else come across this and if so is there a fix for it?
Cheers

Check for the latest updates for your Roxio (previously Adaptec) Software - it's likely that it just doesn't recognize your drive - patches are released to update the drive list. However, your version 4 is old and may no longer being receiving updates that will recognize your drive.
(did you receive that version of Easy CD with your drive?)
http://www.roxio.com/en/support/software_updates.jhtml
Actually, I've just checked:
http://rpp.roxio.com/drives/?page=supported_drives&ltr=M
and you'll see that your drive only received support with version 5.3.0.83 of Easy CD Creator basic. Version 4 won't work for you.

MSI 694T Pro AGP and PCI clocks in OC

Hi!
I wonder about when raising FSB on this motherboard; will there be any divider for the pci and agp clocks, so the pci stays at 33 mhz so I don't mess up any hardware there? And what about the AGP? ?(
specs are as follows:
1.2 celeron (100*12)
ATI Radeon 7500
I'll be happy for all responding! )
And excuse my english please!

Hi Assaf,
This gets to be more of a mystery!
Quote
Originally posted by Assaf
During the post there is a table with all the detected PNP devices and the IRQ they got from the bios.
Is there a \"PCI multimedia device\" listed there ?
No, there is no sign any such a device in the boot up information, which is a bit strange isn't it? It lists my other stuff o.k. - see below.
What other PCI cards do you have?
I have the following installed:
Network Adaptor 1: Realtek RTL8139(A)-based PCI Fast Ethernet Adaptor. The driver for this must be included in Win 2000 as I didn't have to install anything for it.
Network Adaptor 2: BT Speedway ISDN PCI Card Rev. A (Win 2000). I had to install the driver for this from the supplied CD.
Video Adaptor: NVIDIA RIVA TNT2 M64/M64 PRO. I installed the latest unified driver from NVIDIA (Version: 44.03
Release Date: May 14, 2003).
What puzzles me most is that when I rebuilt the system I started out with just the video card installed and no other adaptors (the card was using the Microsoft supplied driver) and there was no sign of the sound system then. So, unless there is something fundamentally wrong with the motherboard surely the sound should have been detected?
Cheers and thanks for your help.
Roy

MOVED: MSI X58 Pro Overlocking and Voltages

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=128737.0

Disable Spread Spectrum & Extreme Memory Profile in bios Cell Menu. Disable Overspeed Protection in bios Advance Bios Features-CPU Features. Since RAM speed increase with base clock increases, you will have to 'experiment again to get the RAM stable. Set Mem. Ratio to 5, Uncore Ratio to 12, adjust DRAM, voltage & timings accordingly, set base clock to 166 or 167, leave all voltages (other than your RAM), on default. This should give you around 1660 RAM speed & 3.33G's, with Turbo, around 3.5G's .

MSI Theater 550 PRO-E vrs ATI TV Wonder Elite

I would like to know which is a better product in terms of TV resolution on the Computer Monitor and recording: ATI TV Wonder Elite or MSI 550 Pro-E ? I understand MSI 550 Pro-E uses the same video chip which is used in ATI TV Wonder Elite. What about the TV tuner and its TV quality on the monitor and recording results ? Which is a better product ? Has anyone out there used both the products and compared them ? I am planning to get one of these but cannot make up my mind. Moreover, MSI tuner card is much cheaper when compared with ATI card :$40 less. I want to be sure that I am getting a good product or why bother to spend $40 more.

if they both use the same ATI Theater 550PRO chipset, then i imagine performance will be pretty much the same

MSI x58 Pro and Quad SLI

OK I am new to this forum first off. So hey! lol. Now maybe this has been discussed.... well im sure it might have been but I thought I would get a direct answer from somebody. I have the Msi x58 Pro mobo and I planning to run QUAD SLI with GTX 295's. Now my BIOS version is the oldest.... I think 7.0 which doesnt support SLI right? and I have read that MSI motherboards now supports SLI. WIll this configuration work and should I update my BIOS to the most current version??

Yes, update with the 8 series bios. That will enable SLI. Please, be sure to use the forum USB Flash Tool for the bios update.

MSI K8T Neo2 FIR and USB2

I am running MS Windows 2000 Pro with SP4 installed. The only USB ports on the board that show USB2.0 status are the ones between the com ports and the ones under the LAN port. All the others are relegated to USB1.0 status. The device manager shows them the same way. I have tried all the new drivers and nothing seems to work. I find it rather strange that only 2 of the 8 avalible ports are USB2.O enabled.
If anyone can hlep me out with this I would appreciate it.
SYSTEM CONFIG:
AMD Athalon 64 3000+ (Non Overclocked)
MSI 9800Pro video
1gb DDR 400 (512x2)
Seagate 40gb PATA
Seagate 180gb SATA
Audigy 2 ZS
Samsung CDRW /DVD-Rom
Logitec PS2 Keyboard and Mouse
APC Backup Unit
USB:
Logitec iCam 3000 Pro
Lexar Secure Jumpdrive 512
LG External USB2 CDRW
Windows 2000 Pro SP4 and Adobe Software.
IE6.01
Mozilla Firefox and Thunderbird
Various Games.

Hi
Get Wonka to chase up MSI, he will have more clout, perhaps.
I will recheck that all the wires are onto pins on mine, it took 3 seperate attempts to get the Neo Clawhammer working, missing the pins with wires - I need one of those magnifyong lights, and a new set of eyes and fingers.
Check with Balarc Advisor or similar, that the USB2 driver update loaded OK, you might need to install it again.
Hi Wonka, the 9th wire safely tucked away, tnx. BUT seeing how your here. Apart from the 2 front USB on this Thermaltake Skull. I have a 4 port USB front drive bay unit inserted, the header is onto the JUSB1, having removed the D Bracket header. these units work on all other MSI boards, noticed when using Mem sticks, reports USB device nor recognised, plug into back its fine. Puzzled
Cheers
jocko

Windows 7 pro x64 and palm centro

I'm running windows 7 pro X64 and the software installed just fine, but not the driver. Does Palm have any plans for a solution? Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS. Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture.
Palm Inc. has historically not divulged any "future plans" for software (or hardware). Will a third-party develop a desktop client? I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

MSI K7N420 Pro 200GB Atapi

Hi,
I have a MSI K7N420 Pro motherboard, and I just bought a 200GB Atapi MAXTOR harddisk, but I don't think it supports this large harddisks, what can I do about this ?
EDIT: The maximum I can get is 128GB !!!

http://www.seagate.com/support/kb/disc/faq/137_winxp.html
im sure the bios sees all 200 gb so its your o/s

MSI (ATI) Theater 550 Pro has fuzzy and quiet sound and perfect picture

I have just brought an MSI (ATI) Theater 550 Pro. It is connected to the antenna on the roof, and I am located in New Zealand (PAL) if that makes any difference. I have previously had problems with MPEG2 codecs, not that I see how that could be related.
My problem is that although I get a perfect picture, I do not get any sound. If I turn the sound up to full volume, I can just make out the beat of the music on TV in the fuzz that is outputed.
I have:
Windows Media Center 2005
MSI (ATI) Theater 550 Pro

Ok, that was a bit simpler than I expected.
I just downloaded a new ATI driver (from ATI site)

MSI Theater 550 PRO PCI - Video IN problems

Hello everyone,
This is my first post - I have an MSI 865 with a ATI All in Wonder 9600 working wonderfully in the AGP slot (MMC 9.13). I purchased an MSI Theater 550 PRO and slotted it in the PCI slot - installed the drivers from the bundled CD and the PowerCinema 3 application - the TV portion of the card works but the Video IN / S video In - does not work - displays only a black blank screen in the MMC 9.13 and in the PowerCinema the button for capture / preview is grayed out - is my card defective?
I tried to install the patch / upgrade from the MSI site for the VideoCapture to work but it fails saying that PowerCinema 4 is required to apply the patch.
What should I do?
Please help..

Yes, I certainly do get an excellent picture when I to the AIWs Composite IN / S Video In Dongle.
I have also tried to use another capture / display program - Media Center Classic (part of the K-Lite Codec Pack) and it too shows that the AIWs IN is working but the THeater 550 shows only a blank screen.
BTW I have installed the latest drivers from the ATI site (the ones with control panel and the C++ update).
The Dongle of the 550 Pro is alright (I checked it by connecting it to the AIW - so the problem doesnt lie there).
That leaves only two options - 1. Defective Card (most probably)
2. Some software problem (less likely - but highly sought)
Please do reply and let me know if you have come across this problem with the MSI Theater 550 PRO PCI with anyone else and how they have solved if they did.

Msi 550 pro remote and hip software

Similar Messages

Maybe you are looking for