MSI 5900 Ultra ram specs plz!

Hi,
I can't seem to find any information on what ram my MSI 5900U is using.  I know the msi 5950's are using 2.2ns ram.  
can someone help clear this up for me please.  I can't find anywhere this information.

The MSI FX5950 Ultra uses 2.0 ns DDR memory, and the MSI FX5900 Ultra uses 2.2 ns Hynix DDR memory chips.
 The H2O Guru
If You Build The Circuit The Electrons Will Come!
Enermax  550 v1.2 EG651P-VE PSU
+3.3V=36A / +5V=36A / +12V=36A
+5V & +3.3v = 200Watts
nVidia MB Drivers v3.13
nVidia VGA Drivers v53.03

Similar Messages

  • 45.23's Resolved SBA Issue on MSI 5900 Ultra

    Couldn't enable SBA on MSI 5900 Ultra with 45.20 drivers. Fast Writes was ok. 45.23's resolved issue allows me to select, but have to reset after each reboot.

    The motherboard chipset drivers (excluding those for the onboard LAN and audio) were installed before the nVidia drivers.
    I re-installed the operating system (item 3 in my first post).
    P.S.
    Just used Driver Cleaner and tried again but still no joy.

  • MSI 5900 ultra

    can i have the latest FX5950 Ultra-VTD256 bios please i want to try something...

    Quote
    Originally posted by urosov
    I have flashed the Asus FX 5900 (non ultra) to FX 5950 Ultra (Gainward bios) and i have 100% with 2 of 2 cards! I have also succesfuly flashed the MSI FX5900 Ultra, non ultra, SP and FX version of the cards wich all of them were running 3dmark 03 for 9 hours now. I can confirm that you get a temp drop of about 8°C on all cards! This mod is simply fantastic!!!
    Gigabyte FX works also (tested)
    Asus FX 5900 works
    MSI FX's work
    this guy claims it works with the gainward bios so i assumed an msi bios would suit me better, also it is supposed to raise vcore on ur card and lower your temps, im hoping to get lower temps since mine seems to heat up alot... plz can i have it pretty plz? oh go on glenn i can see ur 5950 in ur sig! :P

  • MSI 745 Ultra RAM Problem!!!

    Hello,
    I currently have a MSI 745 Ultra Motherboard with the latest installed firmware.
    Ok here is my problem.
    I bought 2 sticks of ram from http://www.crucial.com/uk, the memory was 512MB 333Mhz.  I instantly started getting errors within windows, something like "IRQL_NOT_LESS_OR_EQUAL" and "PAGE_FAULT_IN_NON_PAGED_AREA", the error occurred totally at random, the computer can be running for 5 mins or 5 hours before the error occurs and I can be doing anything from playing a game or browsing the internet.
    First thing I did was run memtest to see if there was a fault with the memory, It found no errors at all.
    Second thing I tried was to reinstall windows, This didnt solve the error ethier.
    Third thing I tried was to only use one memory module, This is the odd thing, Both memory modules work fine on there own with no errors at all.
    Can you please help?
    Barry

    Quote
    Which Windows (e.g. 9x, ME, 2K/XP)?
    Windows XP
    Quote
    Are all DRAM timings set to default or auto detect in BIOS?
    They are all set to the motherboards default
    Quote
    Have you tried moving the second module into the third DIMM socket?
    Yes I have tried all three ram sockets, they all work fine when 1 ram stick is in and I have tried every combination of 2 ram sticks.
    Quote
    post some system specs like mine in my sig down there, cpu what fsb,
    try fsb/dram ratio at 1:1 in bios.
    Athlon XP 2400+  266fsb
    MSI 745 Ultra Bio Version 1.7
    2x512MB 333Mhz Crucial DDR
    Radeon 9800 pro 128MB
    Soundblaster Live
    2x120GB Maxtor Harddisks 7200RPM
    Pioneer 105 DVD-R(W)
    Liteon 16x DVD Drive
    Nexus NX-3500 350W 3.3v - 28A / 5v - 30A / 12v - 18A
    I hope all this information helps you try to solve my problem
    Barry

  • MSI 845 Ultra - Ram probs

    I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board.  ?(

    Quote
    Originally posted by Bass_Player69
    I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board.  ?(
    Check yr manual page 2-6 for full details ....
    Intel Chipset i845D/E/G/GL ...etc can ONLY 4 DDR Memory bank.

  • MSI 5900 Ultra bios mod help!!!

    Has anyone else with the 5900U  tried flashing to 5950u?  I have tried using MSI 5950U bios but found it "flickered" too much for my liking and now am back to original bios.  
    I would like to hear fellow MSI users opinions on this particular card and what kind of experiences you've had with the bios flash.
    Ultimately I would like to flash my card to a 5950U but would like to hear more opinions with MSI cards before I try again.  
    All help is greatly appreciated.

    hi,
    See H20 reply about ram speed.
    Your guess could be right.
    The temp is lower. When you autodetect for speed adjustment, it gets lower speed reflecting its 5900 root (maybe hardware control/lock), but still higher than I can oc the 5900. At default it is 475/950. Manual adjustment reach 503/1.02g, but not stable.
    Maybe new nVidia driver can help.
    There is another site, http://www.mvktech.net that you may have visited, where there are alternate msiBios (probably the same though). Seems rev2 works for people on some forum.
    Notice that not many msiUsers here are onto this topic. Any guesses? Restrictions?

  • MSI FX 5900 ultra or PowerColor 9800 Pro

    Hi
    I have the following system but I am stuck with the Graphic.
    Intel Pentium 4 'Northwood' 3.0CGHz (800FSB)
    MSI 875P Neo-FIS2R
    Corsair 1GB DDR XMS3700 TwinX (2x512MB) Platinum CAS3
    LiteON LTN-525(S) 52x CD-ROM
    Sony CRX220A 52x24x52x CDRW IDE
    Pioneer DVD-120 Tray Load
    Seagate Barracuda Serial ATA V 120GB
    Thermaltake Xaser III V2000A Aluminium Super Tower
    Antec TrueBlue 480W PSU
    Creative Audigy 2
    WIN XP PRO
    My ? is which graphic card shall i buy MSI 5900 ultra or PowerColor 9800 Pro with 256 MB???
    Thanks. ?(  

    ATI is supposed to have better picture quality and better AA quality, but most reviews admit it's a pretty close call.

  • MSI NBox 5900 Ultra wont work at 8x AGP

    I recently bought a MSI 5900 Ultra 256 in the NBox package. I installed it and loaded the latest drivers and began playing DAOC. It was great for half an hour then it locked up. I also had an issue where my refresh rates were really bad and it was drawing like one frame every 10 seconds.
    I rebooted the pc and turned off 8x agp. Botted it back up and played for the rest of the evening.
    I just put in a new 500 watt PS with a 32A 12 v rating, so I would hope the PS isnt at fault. I also had recently cleaned all my nvidia drivers off the machine as I had installed an ATI 9600xt.
    Please help.
    I already spent a week working on an XFX 5900 ultra that I ended up sending back, I dont want do that again. Also, I have noticed a number of other folks here who have had the same issue.

    I have the latest bios and drivers on my pc. I am not too sure what the grease has to do with it not working in 8x mode. I am not real sure what the 3.3 and 5v Amps are actually. The image on the website is very blurry. I looked up a review and found this information:
    3.3v 28 A
    5v    30 A
    3.3v / 5.0v Combined Load - 200W
    3.3v / 5.0v / 12.0v Combined Load - 480W
    The review was found here:
    http://www.systemcooling.com/modules.php?name=News&file=article&sid=1371
    I am going to try a full whip and reload of my machine. If this doesn't work I guess I will return the card and go ATI from here on out.
    Could this have something to do with the fact that the motherboard is an nvidia chipset? Do MSI mother boards have issues running nvidia FX cards?

  • MSI K7N2-IL 2M/B and MSI MS-StarForce GeForce FX 5900 Ultra

    Hi
    I wonder if you could help me.
    I am curious, the below is the spec of my machine.
    AMD Athlon XP 3000 + 333 FSB CPU
    MSI K7N2-IL 2M/B
    256 GEFORCE FX 5900 ULTRA GRAPHICS
    though the graphics card is reported as MSI MS-StarForce GeForce FX 5900 Ultra [Nividia GeForce 5900 Ultra] in Windows control panel.
    I am needing to learn more about exactly what is what in this PC.  
    I have installed MSI Live monitor and have upgraded to NVIDIA nForce System Drivers though my graphic driver is still reported as 4.4.0.3 or 43.51 [another question why are there two versions given to graphic drivers?]
    As Live monitor doesn't report any further updates possible when there are newer Nvidia drivers from the Nvidia website - can I install these ?
    Also I am looking for a utility to monitor, change fan speed and temperature, is the Nvidia  system utility ok to use?  It says that it's only compatible with
    nForce3 Pro
    nForce3
    nForce2
    I'm not sure if I only have Nforce ?
    I would really appreciate any help you may give - I know that the above probably sounds as if I'm as thick as 2 short planks.
    Thanks in advance
    ~ The Doctor.

    nVidia Drivers
    you can get all your drivers there
    both board drivers and vga
    you can use speedfan for temp
    http://www.almico.com/speedfan.php
    boards hardware does not support changing fan speeds though

  • Will a MSI NBOX 5900 Ultra fit in the new mega 180?

    has anyone tried to stuff a msi gffx 5900 ultra nbox version into a mega 180? does it fit? i am considering purchase but the i can smell the irony coming when i think about trying to fit my monster msi video card into that  tiny msi box.
    Zwit

    HI
    yes ive put a msi 5900 xt and the fan is also 26 dba
    all this works fine
    ms 180 deluxe
    3000 xp
    lg 4082b
    1 gig ddr 333
    msi 5900xt
    250 gig fdb hdd
    120 wd hdd
    thx

  • MSI FX 5900 Ultra...

    hi,
    i bought this one a few days ago and was
    just wondering why this card have no MSI TWIN FLOW
    cooling system (it only have the nvidia referenz cooling).
    does the 5900 ultra have no twin flow?
    or should i have to change it?
    p.s. sry for my bad english.
    greetz

    ATI is supposed to have better picture quality and better AA quality, but most reviews admit it's a pretty close call.

  • Geforce FX 5900 Ultra (256) Ram DDR crash

    recently my Geforce FX 5900 Ultra (256) Ram DDR has started crashing, i play a game tehn after a while the game freezes and i hear a loud screeching noise that almost deafens me through my headphones my omly option is to then turn off the pc as i can do anything with the computer :( i checked the tem pof the card just in windows normal operation and its 50 degrees celsius is this normal?

    Actually that models isn't bad at 20A but a little light considering all the hardware you have, try going barebones without all the PCI cards and the fairy lights.
    You didn't post your IRQ shares, and I'd hedge my bets the PCI cards are not in the best slots due to IRQ conflicts. It's a first I've seen of a crash like that but it would not surprise me if it is an IRQ conflict.
    Again, remove all PCI devices and reboot a few times, USe the "Reset Configuration Data" setting in the BIOS after you remove each or both PCI cards at boot.
              color=#000000 size=3>520TS
          src="http://www.hiper-pc.com/static/images/triple-fan.jpg" width=150>
    Features:
            Active PFC
    Double Ball-Bearing Fan
    Triple Fan
    Gold Plated Connectors and fan grill
    Adjustable fan speed-Silent function
              DC OUTPUT
              +3.3V
              +5V
              +12V
              -12V
              -5V
              +5VSB
                size=2>520W
               Max Output
                Current
              28A
              52A
              20A
              0.8A
              0.5A
                size=2>3A
               Max Output
              Wattage
                size=2>260W
              240W
              9.6W
              2.5W
              15W
                          src="http://www.hiper-pc.com/static/images/spacer.gif">
                size=2>500W
              size=2>27W

  • Need power spec for System Fan Header MSI K9N4 Ultra-F

    I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
    I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
    fan burn out the header? I don't have the board yet (it's in the mail - really)
    so I can't use MSI Tech Support (I don't have the serial # yet).
    thanks
    Tomana

       Forgot to add fan headers can take at least 6W/0.50A fans.

  • MSI KT3 Ultra ARU Startup Trouble

    I am running an MSI KT3 Ultra ARU Mainboard with an amd athlon xp 1500+ processor, a GeForce4 Ti4200 made by Gainward (64mb), two AOC 120MM case fans, one 80mm case fan, a thermaltake volcano 7 speed variable Heatsink, two crucial 512MB pc2100 DDR Ram Chips a sony 16x12x40x cdrw and an LG 16x dvd rom, as well as a 20gig tape drive by HP and floppy drive.  The hard drive is a maxtor diamondmax 60GB.  all this powerd by an Antec 350W PSU.
    Specs over with, heres the problem
    I can only boot from floppy disk.  Booting from the hard disk gives me an "Error Loading Operating System" error, I have tried two other drives and both of these drives have OS's on them, winnt4 and winxp respectively.  The Maxtor drive is clean but not new, I am formatting it as we speak to see if that works.  I have tried to boot from a bootable win2k cd on two different CDRW drives as well as an old CD Rom drive, and a DVD rom drive.  I always get this error "Searching for Boot Record from CD.....None Found" proceeded by the "Error Loading Operating System" error.  I am running everything off the three IDE plugs, with round IDE cable(I have tried flat ones, no luck with those either)  I am not attempting to run this in a RAID array at all.
    Anyone got any ideas as to why this problem would be occuring????

    hi nailz,
    Hope this may solve your problem. In the BIOS, Advanced BIOS Features, set "Boot Sequency" 1st, 2nd, 3rd boot devices to the SAME one, ie Floppy for all, or 1st Master HDD for all. Then reboot. Disable "Try boot device' first. Repeat this until you get the board to boot the device.
    If can't,
    Clear the CMOS and retry.
    If can't,
    (In the BIOS) select all IDE devices and set to NONE. Set "Clear NVRAM" in PCI Configuration. Save and exit the BIOS, then re-entering BIOS in the next boot, enable all IDE devices. Save and exit, re-enter BIOS once more, check the "Boot Sequence".
    Yup... try changing around with IDE settings in the BIOS. Good luck.

  • MSI FX5900 Ultra Installation

    Hi,
    I'm having difficulty installing the drivers for a MSI FX 5900 Ultra.  The following explains:-
    1.  Upgraded to Gigabyte 8KNXP motherboard with 3.2 MHx P4, 1 GByte DDR 3200 RAM and MSI GeForce FX 5900 Ultra, using same hard drive without re-installing the operating system initially.  PSU is a 430W Enermax.
    2.  Had trouble (as described below) installing FX 5900 Ultra drivers but eventually after a few attempts it appeared to work but there were problems with a flight simulator (Falcon 4) locking up frequently so decided to do a complete re-install.
    3.  Re-installed Win98SE, with the FX 5900 Ultra being the only card fitted and it worked correctly on the Standard VGA drivers.
    4.  Installed nVIDIA 44.03 drivers by running Setup on the MSI CD.
    5.  Restarted when prompted, reached Windows Logo screen, then reached C:\ prompt but would not go any further.
    6.  Restarted and it went to Safe Mode on the Startup Menu.  Continued the restart in Safe Mode and Device Manager showed MSI MS-Starforce GeForce FX 5900 Ultra installed, hardware version 161, on IRQ 5 with "This device is working properly".
    7.  Restarted and went to startup menu again then selected Normal and continued the restart.  This gave "Windows protection error.  You need to restart your computer."
    8.  I've tried installing the drivers by using "Update Driver" in the Device Manager and browsing to the CD but the same thing happens.
    9.  I've tried installing DirectX 9.0 before installing the FX 5900 drivers and the same thing happens.
    10  I've tried the nVidia 4.03 drivers and the Detonator 45.23 drivers and the same thing happens.
    Any help would be very much appreciated.

    The motherboard chipset drivers (excluding those for the onboard LAN and audio) were installed before the nVidia drivers.
    I re-installed the operating system (item 3 in my first post).
    P.S.
    Just used Driver Cleaner and tried again but still no joy.

Maybe you are looking for

  • To save the sales order number in custom table while creation of the order.

    Hi Experts, Does there exist any exit to save the sales order number in a custom table while the sales order is created in VA01. The requirement is to capture the sales order number in a Z table when a field (payment terms ) is changed during the sal

  • Performance Report domain controllers

    Hi AD experts, I'm lookink for a tool to generate performance report on some DC's. a script to createt Data collector Set (on Perfmon) like http://archive.msdn.microsoft.com/ExPerfwiz and the tool to parse the report like PAL : pal.codeplex.com Is th

  • Lighroom 3 writing metadata to image files?

    Hi, I have been wondering why my backups (differential) weregetting larger than they should, and I noticed that some of the files (.psd and .jpg, and mayde few .tiff) were modified. Interestingly, I do not see this happening to cr2-files, that I most

  • ICC profile naming

    Is there a way to change an ICC profile to make it more easily found in the list of icc profiles in photoshop.  I have a micorsoft 7 system

  • Set 5ghz network to be default for Macbook Air?

    I just got an Airport Extreme and I have given the 5GHZ network a separate ID and set up a MacBook Air to connect to it. However, it keeps defaulting to the other network. Is there a way to change it so it default connect to the 5ghz name?