MSI 5900U VTD256 tv out problem

Where can I get the cables for the TV out from?
Ive got the card but only recently went to use the TV out. THe people who supplied it to me never gave me the cables for it so I cant use it.
Is there a dept at MSI where I can buy them as Im abit stuck without it.
Its the breakout box I am looking for.
The tvout on these cards isnt a standard SVHS connection.
Its a 9 pin connector.
Help..
Craig

Thanks for your reply.
I got it to work after installing detonator version 28.32. The supplied driver which I think is version 28.90 didn't work. Very weird...   :(
Anyway, since it's working now, I haven't tried switching the VGA port. The monitor is currently plugged into the inner VGA port (closer to the AGP port). I have no idea which one is VGA1 and VGA2...  ?(
I just hope that nVidia will fix this issue with the upcoming detonators.

Similar Messages

  • MSI MX460-VTP tv-out problems

    I just buy one MSI MX460 with VIVO, but TV in/out only works with the supplied drivers (Detonators 27.20). Installing any other version only appears one cyan screen in the TV.
    The same thing with video capture, installing WDM drivers 1.19 the video in don't works, only with the supplied drivers (WDM 1.11)
    Please help me!
    My system:
    - MSI MX460-VTP 64MB DDR
    - WinXP SP1
    - AMD TBird 850
    - Soyo K7VTA-B KT133
    - Micron 512MB RAM
    - SoundBlaster Live! 5.1

    do you uninstall the drivers before installing the new ones?, if not try that as drivers can be picky at times

  • MSI G4MX460-VTP TV-Out Problem

    I just bought this card coz of the video in and out features. However when I tried to set the TV-out using Clone mode from nView, the TV only shows a light green screen. I have tried different drivers including the latest 40.41 detonator but still no luck. On some drivers the TV screen is grey with some artefacts all around the screen. The second monitor output works perfectly fine when I apply Clone mode. Another thing that makes me think this a driver problem is that when I used a program called TV-Tool, the TV out works but the primary monitor flickers.
    Anyone can help me? Here's the spec of my system:
    Celeron 566
    Abit BE6-II Motherboard
    256MB RAM
    SB Live
    Thanks in advance...
    Kind Regards,
    Ari

    Thanks for your reply.
    I got it to work after installing detonator version 28.32. The supplied driver which I think is version 28.90 didn't work. Very weird...   :(
    Anyway, since it's working now, I haven't tried switching the VGA port. The monitor is currently plugged into the inner VGA port (closer to the AGP port). I have no idea which one is VGA1 and VGA2...  ?(
    I just hope that nVidia will fix this issue with the upcoming detonators.

  • MSI mx460 vtp tv out problem

    Im pluging into my the with svideo (cable fine channel to video"
    Got the latest 30.00 driver.
    capture works OK
    tv out using nview gets the signal to my tv "the reason i can tell is my tv screen turns bleu as per winXP but the tracking is way off
    thats the only way how i can explane the lines
    i cant see any background or icon just bleu with line ...
    i need help please  

    Thanks for your reply.
    I got it to work after installing detonator version 28.32. The supplied driver which I think is version 28.90 didn't work. Very weird...   :(
    Anyway, since it's working now, I haven't tried switching the VGA port. The monitor is currently plugged into the inner VGA port (closer to the AGP port). I have no idea which one is VGA1 and VGA2...  ?(
    I just hope that nVidia will fix this issue with the upcoming detonators.

  • TV OUT Problem this is how I solved.

    Well, first of all I cannot  guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
    How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.
    The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20,   , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.
    The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT).  The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.
    Than It came the must boring part.  ;(  I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):
    Nvidia 28.32. work with nview.
    nvidia win-xp-2k-2835 work with nview.
    nvidia win-xp-2k-2880 doesnt work with nview.
    nvidia win-xp-2k-2890 doesnt work with nview.
    nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
    nvidia win-xp-2k-2920 doesnt work with nview.
    nvidia win-xp-2k-2942 doesnt work with nview.
    nvidia win-xp-2k-2960 doesnt work with nview.
    nvidia win-xp-2k-2980 doesnt work with nview.
    nvidia Win2k-xp-29.90 doesnt work with nview.
    nvidia W2K_XP_V29.90 doesnt work with nview
    nvidia Win2k-xp-3020 doesnt work with nview
    nvidia Win2k-xp-3030 doesnt work with nview.
    nvidia Win2k-xp-3082 doesnt work with nview.
    I got all this drivers from a really nice site: 3dchipset .
    Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.
    And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once.  X(
    That all folks

    Yes, that's how iMessage should work. Try this. Sign out of Messages on both devices. Sign back in on your phone and wait until it activates. Go to Settings>Messages>Send & Receive. Make sure Start New Conversations From is set to our mobile number. Then sign in on your iPad using the same Apple ID as you use on your phone. Once it activates, verify the settings. I've got iMessage syncing across my iPhone, iPad and MBA. Every once in a while, there's a glitch but rarely.
    Best of luck.

  • Does MSI FX5900SP VTD256 like ASUS A7S333?

    I just got my new MSI GeForceFX5900SP VTD256.
    After uninstalling my previous board and configuring my new card, my computer froze with a blank white screen.
    After variuos unsuccessfull setups from at my BIOS, I decided to format and reinstall my Windows2000 with SP3.
    As soon as I install my video drivers, the problem comes back.
    Fooling around with my BIOS setup (AGP apperture size and stuff) and my card memory, 2D and 3D frequences, I could put my system to work ok for a longer time. But it freezes at the and anyway.
    I found that my cards conf was unable to detect my AGP slot speed and capabilities (mine is 4X). And it detected it as "AGP(on PCI mode)".
    I then updated my mobo BIOS and installed a new VGA driver from ASUS. Now my fx5900 can detect my AGP speed and now it displays "AGP" instead of "AGP(on PCI mode)".
    I thought that would work but it still freezes after a moment. I unplugged all my periferals, leaving only my HD, CDRW and video card on fearing that it could be something with power force.
    If I use only regular apps, like browsing the internet and stuff, my comp works for about 10 min before freezing. But if I run 3Dmark 2000, it crashes right in the 1st, 2nd test.
    Any IDEAS what is going on? Is it overheating (the cooler runs ok and the temperature when I check is cool)? Is my card malfunctioning?
    Here's my systems config:
    Athlon XP1700+
    512MB DDR
    HD 40GB seagate 7200RPM
    Mobo ASUS A7S333 - bios as331600 and most recent drivers
    MSI GeForce fx5900SP VTD256 with most recent drivers
    Config on BIOS set to -
    AGP Aperture size = 256MB
    Agp "Speed" = 4X
    Video card = AGP VGA Card
    Supprt for PCI2.1 = enabled
    Fast writes = Enabled

    What is a PSU? Power Supply Unit.
    If it is, I will check it tonight and I will post it here.
    Do you really think this is a power related problem?
    I have already unppluged everything, leaving only my video card and HD turned on, eacho in its own power cord.
    Thx in advance. I hope I can get this to work. My games are staring at me...
    P.S. I'm thinking in buying ASUS A7V8X-X. Do u think this board will present no prblem with my new card?

  • MSI 6967 or PC2PC license problems!!

    I have 2 MSI 6967, also known as PC2PC.  The drivers on CD are erratic, but I previously managed to get it to work fine with a upgrade to a newer 1.3.x driver.  Now with 1.4.x the damn thing is asking for a license key on install (I was unable to retain the compressed driver file that worked, regrettably).  
    So I went to the slightly rubbish web form to get these, and I entered the correct BD address for each of my devices (I know this to be true, as I when I try to re-register these the web service gives a 'rogue registration' response, so it must store the registered BD's), and obtained a 32-digit key for each.
    When it asks for one of these keys on install, I give it, and it seems ok.  That is, until it has finished, whereupon the bluetooth system tray icon remains red (inactive, or problem), and only the option to 'Start using Bluetooth' is given on right-click.  Naturally I tried this, but it says:
    "Your bluetooth software license does not include use with this Bluetooth device. [6]"
    When I click OK, it then tries to get me to point it to a new, valid license file.  The only one I can see is in the unpacked files that came with the driver download.
    I entered the BD correctly on registration, and it must have been valid as I got a 'valid' response i.e. the web form authorised it as an MSI bluetooth device with that address (presumably the whole purpose of the form, apart from spamming you to high heaven).  I can't do anything else now as it won't let me re-register these BD's anyway.  I can't find the mysterious older driver that worked now, as you can only download the latest (i.e. ) one.  I can't even verify the BD's now, as it doesn't give me the option to go to configuration of the device (although surely they are fixed identifiers anyway, like MAC addresses?).
    Come on MSI, this is POOR service!!  I own these devices, I paid for them, you let me use them for a while and now you have told me to shove it...  If there is no way around this insanely crap rigmarole, please make a driver history available.
    I recently ordered a new-build pc, and I specifically avoided MSI motherboards and other components because of this specific problem I am having with my 'legacy' MSI bluetooth omponents.
    Can someone please let me know how I can get my stuff working again?

    hi
    i bought the adapter today and it was shipped with the old 1.3.1 drivers that didnt work on my w2k pc *EDIT*(bttray say no device, but w2k devicemanager say device is ok and drivers are running)*/EDIT*. so i tried to get the update and ran into the same stupid problems (wrong license file message) :(. the only positive think is that by reading in this forum i find out that:
    1. im not alone with my problems.
    2. if msi was thinking when the talk about 'link to the future', that i have to read lots of rather old postings, that only states that msi didnt care about the problems, or simply can't fix them. and the only solution ist to go to the darkest corners of the internet to get a crack for something that i already payed for.  i think its better for me to stay in the past and never again buy parts from msi, not for me nor for any of my customers (i'm nearly 15 year's in the pc/network troubleshooting bussines).
    3. tomorrow i have to go back to the schop where i bought this useless pice of hardware and give it back. then i wait that the acer adapters are available again. (i use already one on my notebook and was fully satisfied with it, and had mostly no problems at all, at least not such stupid ones).
    greetz nb

  • MSI VX6600-VTD256 (602-8988-010)

    Hello:
    I have MSI VX6600-VTD256 (602-8988-010)
    When use the drivers on the install CD that came with the card by
    running "setup" from the root directory of the CD everything works fine.
    However if I use the latest MSI drivers (nvidia_xp2k.v71.22) or the
    latest nvidia drivers (71.89_win2kxp_english) I get anomalies and or
    artifacts on my desktop.
    I would like to know why card works fine with the drivers on the install
    CD, but has problems with the latest drivers even though the latest
    drivers are in fact newer.
    System Information
    Time of this report: 5/11/2005, 17:59:25
           Machine name: DEFAULT
       Operating System: Windows XP Home Edition (5.1, Build 2600) Service
    Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
               Language: English (Regional Setting: English)
    System Manufacturer: Compaq Presario 061
           System Model: PP195AA-ABA SR1300NX NA510
                   BIOS: Rev. 3.11
              Processor: AMD Sempron(tm)   3000+,  MMX,  3DNow, ~2.0GHz
                 Memory: 512MB RAM
              Page File: 242MB used, 1007MB available
            Windows Dir: C:\WINDOWS
        DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
         DxDiag Version: 5.03.2600.2180 32bit Unicode
    DxDiag Notes
      DirectX Files Tab: No problems found.
          Display Tab 1: The file nv4_disp.dll is not digitally signed,
    which means that it has not been tested by Microsoft's Windows Hardware
    Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from
    the hardware manufacturer.
    Display Devices
            Card name: MSI NX6200
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_00F3&SUBSYS_98901462&REV_A2
       Display Memory: 256.0 MB
         Current Mode: 800 x 600 (32 bit) (60Hz)
              Monitor: Default Monitor
      Monitor Max Res:
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0010.7125 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
     Driver Date/Size: 1/9/2005 17:32:00, 4033664 bytes
          WHQL Logo'd: No
      WHQL Date Stamp: None
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 1/9/2005 17:32:00, 3330304 bytes
    Device Identifier: {D7B71E3E-43B3-11CF-076C-9AB803C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x00F3
            SubSys ID: 0x98901462
          Revision ID: 0x00A2
          Revision ID: 0x00A2
          Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
    ModeWMV9_B ModeWMV9_A
    Sound Devices
                Description: Realtek AC97 Audio
    System Devices
         Name: Agere Systems PCI Soft Modem
         Name: VIA CPU to AGP Controller
         Name: VIA Standard PCI to ISA Bridge
         Name: VIA Standard Host Bridge
         Name: Standard Dual Channel PCI IDE Controller
         Name: Standard Enhanced PCI to USB Host Controller
         Name: VIA Rhine II Fast Ethernet Adapter
         Name: Realtek AC'97 Audio for VIA (R) Audio Controller
         Name: VIA OHCI Compliant IEEE 1394 Host Controller
         Name: VIA Bus Master IDE Controller
         Name: MSI NX6200

  • MOVED: MSI K8N Neo 2 Platinum Problem

    This topic has been moved to Overclockers & Modding Corner.
    MSI K8N Neo 2 Platinum Problem

    A lot of things could be wrong but it will be easier to figure out if we know what you did.  When you say you changed settings in Bios, do you remember your last settings and what you did?
    It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
    Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
    If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life.  Consider removing parts and testing them in an other machine.  Start with CPU and memory?
    Good luck.

  • MSI-Z87-G45 Killer networking problem

    MSI-Z87-G45 Killer networking problem, need help please!!!
    1st instahttps://forum-en.msi.com/index.php?topic=172016.0ll-  internet works- but when I tried to do the "test" in the control panel for KillerNetwork, it failed to load, it said that I needed to install flash. I closed out that window that popped up for running the speed test and got a message that says that in order for the killer networking to work correctly I must perform the "speed test". So I went and downloaded the latest version of "flash player". tried the test again and got the same results. How the heck can I do that if it doenst see that I have "flash" installed....Grrrrr  btw-Flash has been verified and works on the web page where that "test" resides if I go directly to the site, just not via this dialog box that the control panel uses.
    So I deleted the control panel and driver and reloaded them.
    Went to do the "speed test" and got a repeat of the above, so I left it alone and tried to play a game...the lag was horrible, the worst I have ever experienced - unplayable, so I guess that message about the speed test is 100% a must!!
    I have tried everything I can possible imagine, I even reinstalled windows and all the drivers again....still nothing works with this "speed test dialog box"....What to do??
    Thanks in advance-Rob

    Thanks I will try that, if not, it seems the adapter may have an issue beause the internet is jacked up on it right now.
    On that control panel program, I wonder why they wouldnt just program it to take you to the site via the browser and not try to keep it embedded inside that pop-up window<-------hey!!! that just gave me an idea- I wonder if the problem is that it is a type of "pop-up"!! Dang I will have to wait until tonight to try that - "enable pop-ups" ....never thought to try that since it wasnt inside the Chrome browser window itself...maybe its the fix!! "ummm" maybe!!! naaa it cant be that simple ...can it?? lol
    I realy hope it is, well either of these...that lan adapter was the whole reason I went with this MSI board!!

  • MSI 870a-G54 Hard drive problem.

    About a week ago i reinstalled Windows because it started to slow down (virusses and what not) And as soon as i reinstalled everything (programs games etc etc) One of my harddrives used for games did not show up at the bios and at My computer.
    So this entire week i've been trying to get it to work again and i've narrowed down the problem today to the BIOS and/or motherboard not giving the power to the HDD in order for it to start and be recognized in BIOS and Windows.
    What ive done to come to this conclusion:
    - Reinstalled Windows twice,
    - Replaced CMOS Battery,
    - Flashed the BIOS to every BIOS setting the MSI website had to offer. None worked for the HDD to get powered up again.
    - Moved CMOS jumper,
    - Changed SATA and powercables on harddrive,
    - Tried the HDD on another test PC i had and reformatted it there as well,
    - Only hooked up the not working HDD to the PC, (HDD did not spin up, and came to the conclusion at this point that motherboard or BIOS is the culprit)
    - Unplugged the powercable to the not working HDD and plugged it back in when the PC was running and i could feel it spinning up, after this i restarted the PC so that the HDD would still get power and it was recognized by the BIOS and Windows and i could use it. As soon as i shut down the PC entirely and restarted it the HDD would not spin up. And i had to unplug power to the HDD and plug it in again and restart PC for it to work properly.
    - Checked for bad sectors nothing found,
    Everything else is working perfectly. Except that one HDD not getting the power when booting up the PC.
    The HDD in question is the "Samsung HD502HJ 500gig" used for Steam games.
    PC Specs:
    CPU: AMD Phenom II x4 955 Black edition. Put on a new CPU cooler last summer (Cooler master Hyper 212 Plus)
    Mobo: MSI 870a-G54
    PSU: Antec EarthWatts EA650 (650 Watts)
    Graphics card: Powercolor PCS+ HD5870 Put on a custom cooler last summer (Arctic Cooling Accelero Xtreme 5870)
    RAM: Kingston ValueRam 1333Mhz DDR3 (8gigs 4x 2gig) Bought 4 gigs extra last summer
    HDD1: Seagate ST3160812 AS 160gig used for Windows 7 Ultimate 64 bit (Works perfectly)
    HDD2: Samsung HD204UI 2TB used for Storage / Other games than i have on Steam. (works perfectly) Bought last summer with the cooling/system upgrade
    HDD3: Samsung HD502HJ 500gig used for Steam games. (Does not work anymore after reinstal) Bought 2 years ago along with the rest of the PC
    I am completely at a loss here as to what the problem is. I do not have the funds to buy a new piece of hardware at this time (i think the entire week of struggle would back that up for me lol...). And ive basically tried everything what i know and what i've found through Google and friends. Might have been better going straight to MSI forum and post my problem here but narrowing it down to this not only helps me but the person that is going to post below in this thread as well lol.
    Thanks in advance and i hope to hear from anyone soon.

    Quote from: Bas on 09-March-12, 19:16:21
    Try drive in different PC, as it looks like it died.
    HDD's always spinup as soon as power is applied, ergo I think the drive died.
    Ive tried it already in 2 different PC's and i have to apologize here for not mentioning that earlier in the topic.
    The drive spins up perfectly in both of those PC's and ive checked for bad sectors on both of those PC's as well and it showed that the drive was 100% healthy on both PC's
    The drive was working perfectly fine before the reinstallation of windows. Thats why i dont think the drive has died. Because it would be weird that the drive just suddenly gave up right when im reinstalling windows..
    It also doesnt add up when i plug the powercable back into the drive while the PC is running and it spins up then and works perfectly until PC is shut down. Thats why i had it narrowed down to the BIOS and/or Motherboard being the culprit.
    My best guess is that its software related because the PC does boot up so its not a hardware problem.
    P.S.
    A friend of mine said that it could be a powersaving issue. But ive looked into the BIOS and i could not find anything about it.

  • Time out problem in BPS

    BPS friends,
    We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
    We are on BW-BPS 3.5.
    How can I solve this time out problem? Please respond to me.

    Hi Pat,
    How many record did you copy ??
    Could you restrict the copy in not 1 package ??
    Package per package ...
    I suggest you ..
    e.g. you have restriction by a 0CALMONTH / something ..
    Then,
    You can copy e.g. for January to March, then March to August, etc.
    You can automate it by planning sequence.
    Hopefully it can help you a lot.
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • AirTunes with AirportExpress cut or drop out problems - my solution...

    I buyed 2 of the Airport Extreme one month ago (Firmware 6.3, Itunes 7.1.1), never got them working fine, till yesterday...
    I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
    I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
    In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
    I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
    I hope this will help others with the cut or drop out problem. If you have a working AirTunes system, please post your setup. Mostly I'm interested in a Setup with working WPA...

    Thanks, I hope I can help others with this annoying problem...
    Sorry, I forgot to write about the RF Interference. Belive me, I spent hours and hours searching for a solution in the Internet and every checkbox the Admin utility offered me to try out... I'm working as a system engineer, and supporting computer systems since the early 90ties, so I'd say I have a bit knowledge about all the networking, WLAN, Audio... In school we had the Apple Mac I with the 12" monochrome monitor and appletalk for networking quite funny!
    But back to the RF interference: At the moment I activated it on both AX I own. I have a microwave, wireless phone and I'm living in a Area with many WLAN access points. I can choose between 6 networks!
    I'm the only one with a network higher than channel 6, so this area is clean at least.
    As my AirTunes do work at the moment, I'm not going to try if I could also deactivate it.
    Next step is to try if I can connect the AX Router to the internet. A connection to my ADSL router should do that, but up to now I had very strange behavior when plugging in a ethernet cable to the AX. If this will work, it will be my final solution, at the moment I only see it as a workaround...

  • The Video Out Problem...Fixed?

    I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
    It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
    I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

    I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
    That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
    What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
    ted.h.

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

Maybe you are looking for