MSI 6309 V2.0 Overclock using Fuzzy Logic 4

Hi Folks, I am new here and new to MSI MOBOs. I have got a MSI 6309 V2.0 Mobo with a PIII 800 CPU. I want to overclock this using Fuzzy Logic 4. When I try doing this I get lots of message boxs with 'privileged instruction'. ;( Can someone tell me if this MOBO is supported by FL4 ?( and secondly if this MOBO is the same as MSI 6309 'LITE' ?(
Thanks in advance

The ratio can't be changed while operating.
The ratio the board booted with will be kept.

Similar Messages

Pc restarts using fuzzy logic 4

I don't know why, but my pc restarts now when I use the fuzzy logic software. The only thing I change now is I downloaded the new NVDIA 45. driver and add a hard disk at the IDE3. Does anyone know why?
ANyone know where to find the NVDIA 44. driver? Its better. I use the new version in FIFA and the players shirts seem to have holes at the collar. I can see their necks. And the graphic is not that all good.

http://download.guru3d.com/detonator/
weak 12v line on psu
what are max amps of label 3.3 5 and 12v

Is to possible to control a motor by using fuzzy logic toolbox in Labview and motor interfaced with PIC microcontroller

sir
I am doing a PG project on fuzy logic control of robotic arm,In this first i need to write a code in LABVIEW fuzzy toolbox and interface that that code with PIC where motor is connected and a tachogenerator should be connected to motor to send speed to LABVIEW through PIC microcontroller where ADC is inbuilt in it.
Please help sir me whether it is possible to do that ,if not tell me do i require any interfacing device ,I am very new to labview

Now for this problem, Fuzzy can be easily used to control the plant. Here is the softwares that would help in this task:
- LabVIEW Full Development System (FDS) 2009 or later - The is the LV version that allow you accessing the latest Fuzzy Logic develoment
- LabVIEW PID and Fuzzy Logic Toolkit 2009 - This has PID and Fuzzy Logic functions available for you to develop your controller
- LabVIEW Control Design and Simulation Module 2009 - This is a complete set of functions that allow you to simulate and develop advanced control applications. In your case, you probably will be using this module for simulation of the DC motor.
Now, you also will need a way to read the encoder and control the voltage applied to the motor. You have several options from NI for that process. Probably a multi-function Board could help since they have digital counters and Analog Output signals. However, I can't recommend what would be best for this application, but the ideal platform is the CompactRIO platform for your application. They have a Real-Time controller and integrated Input/Output modules with signal conditioning that could allow you to directly drive the DC motor. I would advice to go to our webside (http://www.ni.com/compactrio/) and verify what this platform does. For this platform, you will also need the following sofrware:
- LabVIEW Real-Time Module 2009 - Allow you to develop you application in Real-Time for deployment.
Hope this helps.
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

MS-6309 v5 Celeron 1.2 + Fuzzy Logic 3/4

this is a msg i posted to the MSI support mail.
Hi!
Im using an old MS-6309 v.5 mainboard with the 370 socket
and a Celeron 1200 tualatin on WinXP SP1.
This is my problem :
Im trying to use Fuzzylogic to overclock my system and simply doesnt
work it gives a error message that really doesn´t make sence.
In my manual it say that my mainboard supports Fuzzylogic 3.
I have all the latest updates for both windows and from liveupdate.
and i have come to the conclusion that it´s either something wrong with
my mainboard OR that fuzzylogic doesnt support my mainbord in WinXP, or
perhaps that the configuration in the BIOS is wrong. But i have tried
everything. I have tried FL4 also but same thing there.
Please help me before i go crazy.
sincerly / John
Any suggestions would be helpfull .. Going APE! :]

I've currently got mine running at 1.31 GHz by raising the fsb to 131 MHz in the BIOS, which isn't too bad, but that's as high as the BIOS will allow with a Celeron and I know this thing will go faster. It barely hits 90 degrees F with 100% load for several hours. 8o
With the higher multiplier (12x) on your CPU, it's very possible that 131 MHz fsb is about as high as you'll get it anyway. So, you might not really need FuzzyLogic to max it out. Just be sure you've got good cooling, turn it up slowly and watch your temps. No response from MSI? X(
I really wish this software worked, it looks pretty cool. Oh yeah, for some reason, I had to enable or disable 'Quick Boot' in the BIOS to get it to overclock (can't remember which at the moment). Enable it, I think. Otherwise, it would repeatedly reboot, slowing itself down each time until it hit something like 666 MHz! :(

How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?

I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop.
Plz Help me in this regard...................
i have attache snapshot of my program
Attachments:
fuzzy in simulation loop.JPG ‏52 KB

Hi Sankhadip,
Sorry for the late response. I was looking at your code and
I noticed that the graph scale does not start from zero. That might be the
reason why you don't see the transient in the simulation. To change the scales
simply double click on the lower limit and set it to zero. If this is not the
expected results, can you please post the expected results, so we can see what are the
differences between the results . Also, you might be using different
solvers, and that gives different results as well.
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National
Instruments

Re: using fuzzy logic

You can use a STring similarity algorthm that will guage how close one String is to another. One such algorithm is the Levenshtein distance algorithm but it tends to work best with long Strings. I'm sure there are others out there if you look i.e. try Google.

You can use a STring similarity algorthm that will guage how close one String is to another. One such algorithm is the Levenshtein distance algorithm but it tends to work best with long Strings. I'm sure there are others out there if you look i.e. try Google.

Using fuzzy logic over clocking

Last time I used it It was ok-I gained a 400mhz boost. Now when the application is testing settings, my pc restarts by itself. Know why?
"bump"

Was the setups and the settings the same the last time round and this time round when you o/c?
All the Best... :D!!!

PC hang when using fuzzy logic to OC

For some time now, the pc seems to hang whenever I want to OC. I can only think of the GF2ti card as the culprit, not wure what else it could be. I think Nidia new drivers do not permit OC easily. Anyone can pinpoint the problem & help me.
I use to get from 2.8>3.0 easily without any problems. the software will stop when reaching favourable figures, but now the software does not stop running, testing speeds. the speed does not increase, just stay constant at aroun 3.0ghz. When I stop the software, the whole pc stops. Help. thanks.

not sure. Anyone knows about this board. I think its not that powerful. The AGP, PCI is locked.

MSI 648Max-L + Fuzzy Logic 4 = Freezeeee.....

Dear all,
I need your help.
I have install Fuzzy Logic 4 on my PC but when I click DEFAULT or AUTO, my PC just Freeze..
I have installed all lastest BIOS, MSI and SIS Driver which are downloaded from MSI website.
Help.....
P4 2.4B (533)
MSI 648Max-L (MS-6585)
512MB = 2 x 256MB Kingston PC2700 DDR333
Maxtor 20GB 5400rpm ATA100 (PM)
Western Digital 40GB 5400rpm ATA100 (PS)
Asus DVD 16x ATA66(SM)
Maxtor 20GB 5400rpm ATA100 (SS)
Sound Blaster Live! Value (Disabled onboard sound)
Altec Lansing 4100
Asus V9180TD GeForece4 MX 440 64MB DDR with AGP 8x
3Com 3c905c 10/100 NIC
Symbios SCSI Card + Yahama CDRW 16 x 10 x 24
Enlight 300W ATX Casing
Windows XP Pro + SP1

Quote
Originally posted by NovJoe
In this case, then I'll suggest you not use AUTO adjustment. Instead do manual adjustment by yourself, please kindly post your +3.3v, +5v and +12v rails as I need to see if they falls within +-0.3v to 0.5v for each rail.
All the Best... :D!!!
The rails are as follows:
+3.3v = 3.26v (high=3.26 low=3.25)
+5v = 5.11v (high=5.11 low=5.08)
+12v = 11.9v (high=12.1 low=11.9)
They are all within +-0.3v to 0.5v for each rail.
My Vcore = 1.44 (high=1.44 low=1.42) This Vcore is way low compared to the 1.712 that icetea40r mentions his 645E Max U is running. Is this my problem? Do I just have my Vcore set way, way low?
The motherboard is running Windows 2000 (Version 5.0, Service Pack 4). Fuzzy Logic 4 will not display Memory voltage or AGP Voltage. It displays “N/A” for both. It displays the CPU voltage correctly.
The memory is Seitec 256 MB PC2700 DDR 333 MHz CL 2.5 (which I purchased as installed “house memory” when I purchased the motherboard. The AGP slot is occupied by an ATI Radeon 9000 Pro. The CPU is a 2.53 GHz Pentium 4 Northwood. I have never successfully used Fuzzy Logic to adjust the system status or overclock the system. I have uninstalled and reinstalled Fuzzy Logic but it still has the same problems.

Temp. Fuzzy Logic 4! WinXP

Got a few questions, maybe some of you clever folk can help?
1) I use Fuzzy Logic 4. Not for overclocking or anything, its just to keep an eye on my system temp. etc.
I can't get the CPU Fan RPM displayed it just shows ----
does anyone know how to make this work??
2)I'm runing Win XP Pro with SP1 when i go to shut down windows logs out etc but doesn't shut down automatically - I have to wait and then press the power button to power off! Any ideas??
3)My CPU fan runs about 2500rpm is there any way to increase this?? (intel bogg-o)
I don't seem to be having the temp probs alot of you are experiencing. At idle my CPU runs between 40-45 degress C, when I'm absolutely raping it during really heavy encoding processes for hours on end - it never goes above 63 degrees. Thats just with a bogg standard intel heat sink & fan!!
Thanx in advance! :P

U can use the MSI PC aleart 4 program.

Fuzzy Logic 4 Turbo problems

Hi!
I just tried to use Fuzzy Logic's auto clocking. It does this tests and then reboots. Then I read from manual that there should be someking of Turbo-button I can use after rebooting to use best possible clocking. My problem is that I don't have any Turbo-button! Can anyone help, please?

if u want you can redownload it here(big link): link
it is still better to overclock through the bios

Fuzzy Logic 4 help!

How do I use Fuzzy Logic 4??
I can install it, I can run it but I am buggered if I can actually change anything, all I can do is look at temp, voltage, multiplier, fsb speed and CPU speed.
I thought this tool was to enable you to manipulate the CPU speed??
I have a K7N2-L mobo 2100XP (TB 'b') CPU and using win XP home.

How do I use Fuzzy Logic 4??, you ask...
The short answer is: you can't. It doesn't work with the nForce2, as MSI makes clear.
System:
Mecca Future Dreamers CP101
Thermaltake Purepower ATX420W
MSI K7N2G-L
BIOS 3.2
XP2000+ T'bred
1 x 256MB Spectek PC2700
Maxtor 40GB 7200RPM
JustCool internal HD cooler
Maxtor 6.4GB 5400RPM
Lite-On 32x12x40
NEC 100MB Zip drive
Win 2k Pro (SP 3)

Is fuzzy logic vi good for discrete system

If modeling a system using PID is too hard or too difficult, I want to use fuzzy logic, but according to the NI control manual, fuzzy logic is good for a continuous system.
Can it be used on a discrete system? for example, turn on a heater for 2 second and shut off, wait for 10 minutes, and then meausre again and go through fuzzy logic?
Can my idea be fulfilled?
Thanks

To work with fuzzy logic does not require any transfer function as it is a fully descriptive, the disadvantage is that you have to know very well the operation of the plant and has something to do with trial and error, but when setting the rules correctly, your system is completely stable.
Jonathan Cruz
CHALLENGER
K U D O S __ B I E N V E N I D O S

My project title is fuzzy logic controller for rotary crane. need to reduce sway of pendulum

helo. i want to ask whether my block diagram is correct or not. there is no error occured but no waveform will generate. i give the picture of my block diagram and my front panel. really need help. big thanks!
Attachments:
macam jadik je.JPG ‏42 KB
front panell.JPG ‏28 KB

Please look at this post for instructions in how to use Fuzzy Logic with RT. However, notice that this only works with RT, not FPGA:
http://forums.ni.com/t5/LabVIEW/Problem-of-using-fuzzy-in-my-project/m-p/1772362#M615631
Hope this helps
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

Programming fuzzy logic controller design

Hi,
please i am using fuzzy logic controller design. Inputs and outputs data are connected to an OPC server.
My question is: could i access programmatically (in the vi ) to the fuzzy logic controller design to prevent to enter in it each time that i need to change values ?
Samer,

Hello all
The PID and Fuzzy Logic Toolkit 2009 was completely redesigned.
There are new API VIs and a more intuitive user interface for creating controllers.
You can create MIMO controllers with unlimited inputs and outputs, and also modify the controller on-the-fly.
Check it out the new features and let us know your needs on Fuzzy control.
LabVIEW PID and Fuzzy Logic Toolkit User Manual
Regards,
Bruno Cesar
National Instruments

MSI 6309 V2.0 Overclock using Fuzzy Logic 4

Similar Messages

Maybe you are looking for