Msi-6309 version 1 board - BLACK screen but cd and hd spin
Hi ya'all
Just wondering if anyone has any thoughts on this problem.
I was happily using windows 95 and my MS-6309 board with 733mhz cpu and 128mb ram.
my Power supply stopped working. I then replaced it with a better one. I thought i might upgrade my OS as well.
I then wiped the hard drive and installed windows 98.
Install went well, but on restart got some message about missing .vxd files.
Used another computer to grab the missing vxd files. cool should be able to replace the missing files.
But when trying to boot up the other pc, no go.
The screen stays black, the CD-Rom spins up, the hdd spins as it sounds like it is trying to boot - but then the red led stays red and goes no further. The LED BRACKET inside the case is Lit RED-GREEN-RED-RED (i have leds in a row rather that a d-bracket)
Can anyone shed some light on this problem.
thanks in advance.
Hi
Check inside the computer to be certain that everything is plugged in correctly. You can even reseat the memory and video cards to be safe. Also check to see if any of the capacitors have bulged ends or dark stains around their base. Especially the ones close to the cpu socket.
Clear the cmos by removing the AC cord and pressing the power button a few times to drain any electricity from the motherboard. Move the jumper to the clear position for about a minute before moving it back to the hold position. Plug the AC cord back in and try to reboot.
Similar Messages
-
I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
(core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle another problem that I tell him.
I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?baltwo wrote:
Can't recall which I used to do the dynamic repartitioning.
I'm betting that it was originally Partitioned with Snow Leopard.
As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition. -
I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you
Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.
-
my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.
Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything
Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
-
After yesterday's update sent a personal video it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
On my own windows operated laptop when l open the video the start button is crossed through
Is there something l need to do? I can view the videos fine on my iPad ?'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Equium A300 - webcam shows black screen but no picture
Equium A300, webcam shows black screen but no picture.
Anyone have isea as to how to regain picture?Hi
How did you check this?
Did you start the webcam software and checked the picture or do you the internal cam in connection with Skype or similar software?
Did you try to reinstall the webcam software?
No? well then do this -
Sending videos from iphone 4s to pc. Why do I get black screen but have sound
Sending videos from iphone 4s to pc. Why do I get black screen but have sound?
Ok I checked and unchecked the playback via camera yesterday and I got black screen both times.
I could delete the imovie prefs when I go over there today.
I'll try another FW cable but it worked perfectly for importing but what the heck I've got one I'll try it.
Yes camera was set to play and not record.
Plenty of free space -- 131 GB.
I'm pretty sure it's in NTSC DV format, but it's someone else's computer so it could have been changed by someone screwin' around not knowing what they're doing making changes.
PowerMac FW800 (G4), iBook 1.42 G4 SuperDrive Mac OS X (10.4.10) -
IPhone 6 black screen but works
After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
Any Suggestions?
Many thanks
iPhone 6 running the latest iOSIIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty.
-
When I play videos or TV shows on itunes for my PC, a black screen comes up and there's sound for a few seconds, but it stops and the counter skips to -11...
Welcome to Apple Discussions!
Does this happen with all videos?
Do purchased songs play fine on your iPod?
Does the sample video here (for the iPod) work?
Quicktime: Sample Files
Is the software on your computer and iPod up to date?
iTunes
iPod Updater
Update iPod's Software
Have you tried the Five Rs
btabz -
MSI Z87 GD65 - Hangs on black screen with 9C at bottom right
Pretty much what the title says, 'MSI Z87 GD65 - Hangs on black screen with 9C at bottom right'. Does anyone have any idea why it does this? It hangs for a while before eventually continuing with the start-up, this is most frustrating when I have an SSD and want a quick start-up. I have already looked it up in the manual to no luck. Help?
9C last for me like 1 to 3s, depending on the amount of USB devices attached. If I have only USB printer, keyboard, and mouse attached, it shows for roughly less than 1.5s.
-
I updated my phone overnight and now I can't get it to come on. I've tried everything, I have a black screen, white apple and a mine below that looks like it's trying to load but it has stopped. HELP!
You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
So far I have tried the following to no avail:
Checked my pc's device manager - it recognises the device and says it is functioning properly.
Checked the drivers to make sure they are upt to date.
Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
Reinstalled the latest itunes.
Reset the ipod.
Put the ipod into disk mode and reconnected to itunes.
Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
At this point I dont really want to part with another $300 odd dollars for a new one. -
Black screen after login and slow NAL
Hi,
We have a problem which we think is ZFD related. Immediately after the
login there is a black screen presented and the pc appears to be doing
nothing. After 30 seconds or up to 3 minutes the desktop appears. At
that moment the NAL starts and again we have to wait for 1 to 5 minutes
for the NAL to appear.
Here are some figures:
3300 users
700 applications
7 cluster servers
NetWare 6.5 sp5 + nw65sp5upd1 + iscsi65sp5a
GroupWise 7.0 sp1
ZenWorks for Desktops 7.0 sp1
(and iPrint, BorderManager 3.8, NetMail 3.5.2, Identity Manager 3.01)
Windows XP sp2 fully patched
Office 2003
Novell Client 4.91 sp2 + pkc
We are using DLU. The difference in the delay times is because of
hardware. On older hardware you'll have to wait longer. That makes sense
but keep in mind the oldest hardware is still a P4 1,6 with 256Mb RAM.
But 1 and a half minute extra startup time for a brand new pc is still
quite a lot.
We have had an expert at our site. The obvious like SLP, DNS was not our
problem. He took some traces and again no problems found. There are some
posts with ZFD 6.5 which mentions this black screen but no solution is
provided.
Most of our applications are associated with the users' container.
Anyone please?
Joost SannenHi Craig,
We'll follow up your advice and let you know. Currently I'm at home with
the flew so you have to wait for it.
Thanks,
Joost Sannen
craig wilson schreef:
> The "startup" times you are seeing are not the norm and vastly different
> from what most people see.
>
> You need to take steps to see what is causing your delays.
>
> The first thing is to determine where the delay is occurring.
>
> Login as a user that belongs to ZERO policies. No DLU. No Group
> Policies on a PC that has NO workstation Policies. The Windows Account
> should already exist on the PC.
>
> This is your base-line.
>
> Then Add in DLU but no other policy. (Test Volatile vs Non-Volatile)
> W/O DLU, test using Windows Group Policies that you have assigned.
>
> For DLU, you need to minimize the Profile size.
> New users on a PC for me usually add a few seconds but not a lot.
>
> The difference here is less than 1 second in a Windows vs ZEN
> Environment for the creation of the account. The delay is in creating
> the account which is handled by Windows in the same manner in both cases.
>
> For your GPOs, make sure you are following best practice of only setting
> the required settings. Do not set a value that is equal to the default
> value. Each setting you change increases GPO policy processing time.
> Again, Windows not ZEN processes this and the delay would be the
> identical in both cases.
>
> -------------------------------------------------------------------
> NAL Startup Time - This can be a load of things.
>
> Turn of "Reading of Groups" as a test. This is often a big cause of
> delay. You need to test how much of a delay this is causing.
>
> Do you have a large number of apps assigned to the user (by any fashion)
> with lots system requirements. Realize that if a user has 700 apps
> assigned to him but they only appear if they meet a complex set of rules
> this will cause delays.
>
> Do you have a large number of "Force Run" apps running upon the Start of
> NAL? This can cause huge delaays.
>
> Again specific tests to help.
> ------------------------------------------------------------------------
> After logon, are you attached to any replica servers located across a
> slow WAN link? We may need to try and make sure we delay attaching to
> these servers during initialization.
>
>
>
>
>
>
>
> -
How do I reboot my iMac in Lion? Right now it opens a black screen with Dos and asks me to insert the boot disk.I recently installed Parallels & Windows 7. Now if I have to turn the system off, it starts up as per above in Dos. know I need to start up and press a couple of keys, but which ones? I forgot....
A simple search around here, identified this thread https://discussions.apple.com/message/15762361#15762361
The More Like This box on the right has more. -
I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Maybe you are looking for
-
I cannot purchase items because it's says since it's the first time I'm purchasing items on this device so I have to answer security questions but it's not my security questions
-
Div Image not showing in Live View
Why can't I see my image placed within a Div tag in Live View? Makes no sense. I've changed the z-index to 1000, also tried 1 nothing changes. Please advise if anyone can help. Thank you!
-
I updated Itunes and now all of my songs are gone from my library
I just updated my account and now my library is empty. i can not find my songs anywhere. Can i plug in my Ipod and re add them from my ipod?
-
Tried all the suggestions but still aint working PLEASE HELP!!
I got my nano in january but it hasnt been turning on for about a month. Its fully charged and sometimes makes a beeping noise when it plugged into the computer. Two icons keep appearing a folder with a ! mark and a black and white battery. Ive tried
-
Can i send images by email as attachments rather than embedded in email
can i send images by email as attachments rather than embedded in email