MSI 6380 LE K7T266 Wont detect 512 PC 2100 DDR

Hi. Today when I started up my computer I noticed that only 256 PC 2100 DDR was showing up as I have 512 DDR this was alarming. I have tried swapping around my ram sticks and it seems as though slots 2 and 3 are not working. I bought a new 256 DDR today and tried that but the new memory was not detected. Is there any bios setting or something that I could have changed by accident? Why wont it detect more than 256 DDR? Also what will happen if I use a 512 DDR stick PC 2700, will it just get clocked down to PC 2100 or will it just not work as this mb only supports 2100? Thanks.
Lance

Hi,
Maybe you have a fighting memory stick? Happens sometimes....try a different brand.
And yes it's no problem to use PC-2700, it will work as PC-2100...

Similar Messages

MSI FX5600VTDR windows xp wont detect Code 19)

Windows XP wont detect MSI FX5600 VTDR
I tried using the MSI 45.33 driver for some reason windows xp has locked in it own driver
vga display controller I cant update the driver
when I try to add new hardware I get the Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
hope someone can help

Clean un-install old VGA drivers, reboot, let hardware manager to detect new hardwares, manually select location of your drivers for your Windows version and install.

Msi-6380 k7t266 pro2-ru keeps restarting

I have just been given a msi-6380 k7t266 pro2-ru from a friend who has just bought a new board and therefore gave me his old one. But i have plugged everything with a radeon 9000 128mb graphics card and an athlon 1400mhz and 512 2100ddr ram and the pc begins to load and the top two diagnostic leds light briefly and the buzzer beeps once and then all 4 red lights come on and the pc restarts itself. ?( This would indicate to me that it is a CPU problem, but i have changed the cpu with different ones and similar results occour??? ;( Does anyone have any idea what this problem may be????? I would be very greatful for any help.
Many Thanks
Chris Tootell

Chris,
Since you have a KT266 Motherboard and you posted in the nVidia/AMD/SiS Motherboard Forum, I moved the thread to Via Forum for you.
Good Luck,
Richard

MSI 6380 RAM Question....Why won't it detect?!!?

Hi all,
I currently have 2 x 256 mb PC2700 DDR sticks (double sided) in my MSI 6380 mobo. I went out and bought myself another double sided stick today and the damn board won't detect the extra stick for love nor money :(
I know the stick works as it reads fine in other slots. MY brother has told me that some motherboards just don't like having 3 sticks. Is this true of the 6380?
If so is there any work around?
Many thanks

Try running memtest on the new stick you just bought. It runs under dos so you won't have to worry about only 256 with windows. Take the old two out and test it by itself. You might have just gotten a rotten dimm. Another thing you could try is putting it in another slot. Your third dimm slot could be bad.

MSI 6380 K7T266 Pro Boot problem

My computer will not boot. The D-LED on the motherboard (MSI 6380) shows one of the LED in red when booting. Since I do not know is that's LED 1 or 4, the following is the reference from the D-LED in the manual:
1. Testing RTC (Real Time Clock)
2. Boot Attempt - This will set low stack and boot via INT 19h.
Can someone help me? What seems to the problem and how to resolve it?
I am using the following:
MSI 6380 (K7t266 pro), BIOS ver 1.9, PC2100 DDR (256mb), 64mb 4x AGP, 80gig HD, NIC, CDR, and 56K Modem.

put power on and off agian, acpi enabled !! in bios, do not use pci slot 1 and 5, if there is Creative and a modem on that place

MS-8448M MSI Live Update OSD wont dect later Firmware

--------------------------------------------------------------------------------
MSI Live Update 3.53 OSD wont detect later Firmware
error message:MSI Live Monitor found no available version from MSI Server
I just installed the MS-8448M (X48) (ATAPI COMBO48XMAX ) Drive
The firmware is Version 1.10.I downloaded Version X48-Vs120 I want to update the drive but live update state no updates are available yet I downloaded one
I tried to update through Dos with no luck

:wall:well I found it OMG!
Model below
-MS8448M- MSI DVD/CDRW COMBO BLK/WH PAN
X48MK0309011494 1
Live Update Info:
MSI Live OSDTM Version: 3.53.000
Optical Storage Drive Information:
(1) OSD Manufacturer MSI
(1) OSD Model Name MS-8448M
(ATAPI COMBO48XMAX )
(1) OSD Chipset Vendor MediaTek
(1) OSD Firmware Version 1.10
and NOTE here is the link:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=499
-------------------------------------------------------------------------------------

NEED HELP ON MSI 6380 KT266

Please, I Need help.....
first of all, at night, my System seems ok when i print a picture. then the problem came at the morning, when the PC wont even turning on! after some time, about 1-3 minutes, the PC turned on on itself!!! sometimes the PC rebooting it self when the LED indicating the RAM, and the Processor scanned....then i came to the result that the PS was damage, it was 300W PS
then i bought a new 350W PS, and i plugged all, and it seems it isn't solving the problem...but when I move the RAM from bank 1 to bank 2, the system seems more stable....then i have a conclusion that it was the RAM, so i brought the PC to the MSI distributor on my Country ( Indonesia ).
after a while, they doesn't want to replace the RAM / Motherboard ( the Mobo is for 2 years warranty, and they distribute the RAM, Apacer, too ), because they said it was the PS, so they returned it to me....
so, I ask my friend about the PS, and he said that if the +5V below 4.9V then i was the PS, and it's true, it is @ 4,810v - 4.893v on the BIOS....but how this is connected to the RAM bank 1? i have a 25A for +5v at my PS. until now, the only thing i've done is to reduce the FSB to 100, and moving the RAM to Bank 2. but it's still unstable for sometime.....
*ADDITION* and when finally the PC succeed on Windows, suddenly, i hear a sound, similar to when
you turn the system off..."clack" ...when it does, the PC hang, and after a few seconds...it reboot itself
Do you guys here, experts, could help my on my problem? how to increase the +5v? please, help me....i'm so desperate....
this is my spec :
MSI 6380 KT266 Pro
Athlon TBird 1,33 Ghz @ 1 Ghz ;(
ThermalTake V7+
Arctic Silver 3
40 Gb Quantum
PowerColor GeForce 2MX 200
Apacer 256 PC 2100
Nippon Power Supply 350 W

@ Idle : 45
@ Full Load : 48
there are no combination @ my PSU but these are written on the label :
DC Max OUTPUT 350W+
Voltage
230V
Red +5V, 25A --> it's only 25A, isn't it too low?
orange +3.3V, 28A
Yellow +12v, 12A
White -5v, 0,5A
Blue -12V, 0.5A
Puple 5vsb, 2.0A
Gray P/G, OK
and um...what should I do next, wonkanoby?
and..nope...I'm not that noob on CPU thing....and I've use the AS3 about 3-4 months...i spill AS3 on the die at least the same size as a rice ( sorry for the bad english ) :D

I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer.

Macbook Pro with Retina wont detect monitor on mini display port to dual-link dvi adapter

So after reading Jeff Atwood's post, I decided to jump and give it a shot. So this week I got my monitor in from Korea, and I already had my Apple mini display port to dual-link dvi adapter, hooked everything up - and nothing. Monitor doesnt show a signal, and no display shows up in user preferences.
To verify the monitor actually works, i plugged it into my windows box - and boom, right away there it is in all its glory. So I called apple support, after spending about an hour going through the "are you sure its plugged in stuff", the tech finally admitted to being stumped and blamed the adapter. Not to be deterred, I then went to my local apple store and talked them into trying their adapter to rule out the adapter - regardless of the adapter, the mbp wont detect the monitor.
Just for fun, i tried my old single mini displayport to single dvi, the monitor is recognized, but that obviously cant drive the right resolution, so i just get a backlight. Same deal when i try the hdmi port with a hdmi to dual-link dvi adapter on the end of it. Also tried display port to the same hdmi with adapter on it (the joys of working in a dev shop - cables to test everywhere)
I have read / tried a ton of things:
re-installed / uninstalled air display, just to be sure it was gone. went through all my apps just to see if there is anything like this i could think would be effecting it
install gfxCardStatus to ensure i am on the nvidia (discrete) and not the internal card
Played with different settings on SwitchResX to try to force the res over hdmi - no love - os rejected each one
I bought the monoprice adapter wondering if it was just the apple adapter since the apple adapter has been panned, no love from it either
Reset the PRAM countless times
I have two other adapters coming in to test with in a day or two - maybe one of those will be magic, but at this point i kinda think its software on the mac. My Spec:
I am running Mountain Lion with all the latest updates
New MBP with Retina (2.6g processor, 16gig ram, nvidia video card)
Here is the ebay link to the monitor
Now the other weird thing is pretty much universally these auctions say the monitors cant be run on a laptop - which makes no sense to me, because its just a connection, if the video card is strong enough (which my machine better be) it shouldnt matter the source. The listing mentions its a "by-pass" monitor, which is something I and google have never heard of.
So any sage words to make my day?

Magic was, I have to have the adpter plugged into the mac, let it recognize all with the monitor powered off.
then power on the monitor, and boom gloriousness
For future generations, setup that works:
1) MacBook Pro with Retina
2) Monitor From Korea (example auction)
3) Accell Mini DisplayPort to Dual-Link DVI Active adapter (amazon)
4) Boot mac, plug in adapter, let it recognize the monitor, power on monitor

Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

Upgrading to Windows vista means itunes wont detect my ipod?? Help please.

Recently upgraded to windows Vista. Big whopdeedo.
But anyway, when I plug my ipod in, windows tries to update drivers for it, but of course failas horribly.
However, this is having a knock on effect that means itunes wont detect my ipod. So, while my ipod recharges, I cannot sync it. Thus I can't add new songs and what-not.
Please help.

Yes my ipod is jailbroken, but this has never proved an issue before.
Its not just itunes that now wont recognise my ipod, my other software wont either, and they used to work with the jailbroken ipod.
This all started after i synced a nano, then connected my ipod and a screen came up saying ipod camera connected.
I click on the camera icon in mycomputer and properties tab then selected take no action in the events tab.
This hasnt resolved my issue, and the ipod still comes up as a camera in mycomputer, the only difference being im now not prompted to choose a program to view my photos with.
This is really getting up my nose, as for the second poster, sorry that article was no help at all.
Please someone help me

I have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

i have a dvd in my macbook and cannot eject it. the issue is it wont detect it. i cant find the dvd in finder. what do i do?

Dear Mary,
Good Day...
Restart the macBook holding down the mouse button of your trackpad.......
Good Luck....
Regards
IK

WD Elements External Hard drive wont detect on my MBP anymore. HELP!!

I was desperate to transfer my files from my WD external drive to my MBP but to no avail. So I searched online and found MacFuse and NTFS-3G. So I installed them both and after that, my WD Elements wont show anymore. It was working before prior to installing MacFuse & NTFS-3G. So I tried to remove them both but still the same problem. It wont detect my WD external drive anymore. The light on my WD drive is lighted up as usual but can't be found on Finder. I also tried to remove the WD external drive from my MBP and it recognises that my WD is there! Its says did not unmount correctly, something like that. I also tried to isolate the problem using another computer, this time, Windows and it works well.
The Culprit of all this is when I install MacFue & NTFS-3G
So I am stuck, any help would be highly appreciated.

Remove MacFuse and NTFS3G. remove them correctly, get the directions from the vendor(s). Don't put it back
Do you have any backups or are you winging it?

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

I purchased a 3rd party mini displayport to hdmi adaptor. My 2011 macbook air with thunderbolt wont detect the display.

Is the display turned on? Sometimes it is the simplest of solutions, when details are missing.

MSI 6380 LE K7T266 Wont detect 512 PC 2100 DDR

Similar Messages

Maybe you are looking for