MSI 6380 Problem with DVD burner

Hello
I have a prob with my new DVD burner. Maybe someone of oyu has any idea what could be the prob.
I have an Athlon XP 2400 (T-Bred) on my board (MSI Kt7 266, MSI 6380 v2). I have done the C37 mod and removed the cap. Everything worked fine. Processor correctly recognized etc.
First my old DVD burner and my old DVD-ROM stopped working (means they didn't react to any commands anymore, I pres sejecct and nothing happens...) and after thorough testing (different combinations with correct jumper setting master/slave/CS..., new cable...) I thought they're broken and got a new DVD burner. But after installing this one - sampe problem.
This is the problem in deatils: The bios does recognize the burner in autodetection in the bios or with the setting "auto". Then it says "DVD" for the respective IDE channel and during bootpu it shows the correct name of theburner (LG GSA-4163). But the drive does not react on commands. If I press eject the lamp on the drive starts blinking but nothing happens, the tray does not open. It blinks a few times then blinks a few times very fast but nothing happens. The drive is listed in the explorer in WIN but I cannot access it. Also, the device manager shows no problem. All my HDD's work fine even on the same IDE channel.
Does anyone encounter a similiar rpoblem or have any idea how to solve this?
Thanks.

I got another psu, more powerful then my old one. Same problem though. Can it be that this is the third optical drive in a row that fails?
Strange is that with the new psu (3,3-28A, 5V-35A, 12V-26A, 410W combined, ANTEC Truepower) my hardware monitor shows that for all the power the values are lower compared to my old psu. It shows 3,26 V 4,9V and 11,7V repsectively. With the other psu all values were higher. Is that an error or does this new psu suck?

Similar Messages

Re: K7T266pro2 Board mod - Problem with DVD burner/DVD ROM

Hi there!
I did the mod and installed a Athlon XP 2400 (T-Bred) on my board. Everything worked perfect, I had the 3.7 bios and it recognized the processor correctly, same for WIN, Sandra etc. System is stable, temperature are much lower compared to my old 1700XP.
But there exits a problem and I am not sure if it's related to the removal of the cap. First my DVD burner and my DVD-ROM stopped working and after thorough testing (different combinations master/slave/CS...) I thought they're broken and got a new DVD burner. But after installing this one - sampe problem.
This is the problem: The bios does not recognize the burner when it's in "auto" setting, it does so when doing autodetection in the bios. Then it says "DVD" for the respective IDE channel. But the drive does not react. If I press eject the lamp on the drive starts blinking but nothing happens, the tray does not open. Sometimes the drive is listing in WIN but it's not accessible.
All my HDD's work fine even on the same IDE channel.
Does anyone encounter a similiar rpoblem or have any idea how to solve this? I am sure itt must be a bios issue (to test I have flashed the 3.74 beta bios but problem remains).
Thanks.
Cheers
P.

Hello! I tried to reply, but was thrown out of the forum without passing "Go". In short:
Have only one optical drive in.
Make it Master at the end of the cable.
Disable DMA for it.
If this one works now, continue with the next.
Don't re-enable DMA till both are working.

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

Firewire problem with DVD burner

After update to snow leopard no support anymore for external dvd burner from lacie. the systemprofiler shows it, but I can not use it anymore. I'm so frustated!-(
Everytime the same: DO NOT CHANGE A RUNING SYSTEM!

HI,
Check out the vendor site for 10.6 updates for compatibility with your Firewire drive.
Also, use Apple feedback. http://www.apple.com/feedback/macosx.html
Carolyn

Problem with DVD burner

When i try to insert a CD or DVD into my PB's internal dvd burner and immediately ejects it. Have tried a bunch of different brands of CDs and dvds. Same results. It takes the disk in and then immediately ejects it. Any ideas as to what's wrong?
thx
lenn

It may need a cleaning, go to your local office supply store and buy a DVD/CD cleaning kit which will clean the laser in your drive.
Sometimes resetting the PRAM takes 2-3 attemps so try at least 2 more times and while you are it also reset the SMC 2-3 times back to back. The correct instructions for both can be located by clicking Intel iMac SMC and PRAM resets

Problem with DVD burning

I was trying to burn DVD with GUI it failed multiple times, so I tried with growisofs, but problem is the same:
:-[ WRITE@LBA=10h failed with SK=5h/INVALID ADDRESS FOR WRITE]: Invalid argument
if I try again it shows
:-[ WRITE@LBA=0h failed with SK=5h/WRITE PROTECTED]: Input/output error
so this process just destroys my DVDs
Do you know what may be wrong? I use same DVD type as before, same burner, same software (I was able to burn one, then it stopped to work). I tried even reboot and power off, nothing seems to work.

I'm having a similar problem, I didn't bun DVDs for some time just to see that now I can't anymore...
My message is:
Executing 'mkisofs -r -J /media/extern2/backup-2010.05.30/ | builtin_dd of=/dev/sr0 obs=32k seek=0'
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.25% done, estimate finish Mon May 31 01:16:31 2010
0.49% done, estimate finish Mon May 31 01:16:31 2010
0.74% done, estimate finish Mon May 31 01:18:46 2010
/dev/sr0: "Current Write Speed" is 8.2x1352KBps.
:-[ WRITE@LBA=0h failed with SK=3h/POWER CALIBRATION AREA ERROR]: Input/output error
:-( write failed: Input/output error

Has anybody had problems with DVD's burnt with Optiarc drive

I am burning movie DVD's through iDVD. The movie formats are initially QT with PCM sound encoding. They seem to work well on an old Samsung DVD player, but stutter on a brand new Samsung computer. I do understand it could be a problem with the newer computer, but I would like to hear if anyone else has had any problems so I can see if the problem is more widespread.
OPTIARC DVD RW AD-5630A:
Late 2007 20 inch Alloy iMac
Model: OPTIARC DVD RW AD-5630A
Revision: 1AHM
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Any help appreciated
Cheers
Mick

I too am having trouble playing DVDs burned with my Optiarc drive. Sorry I don't have the solution, but I can add a data point to the story about problems with DVDs burned with Optiarc.
My current hardware: mid-2007 24" iMac, built-in Optiarc DVD RW AD-5630A with firmware 1AHM / MMC-3.
My scenario: after making home movies with iMovie '08 and iDVD '08, I either burn to DVD (TDK 16x DVD-R 4.7 GB) straight from iDVD or I save as disc image from iDVD and then burn the disc image from Toast 9. In either scenario, I can play the DVD on my iMac or any other Mac or Windows computer. However, it will not play on my Xbox (original Xbox, not the 360) because it freezes when trying to mount (sometimes the Xbox will not recognize the disc as a DVD, and sometimes it will begin mounting the disc and then freeze before displaying the title menu).
Before I bought my new iMac, I had the same workflow on an older 2003 17" G4 iMac that has a Sony DVD burner, and those discs play fine on all DVD players including my Xbox. To test the hypothesis that something happened to my Xbox around the time that I upgraded to my mid-2007 24" iMac, I burned several DVDs using my older iMac, and they continue to mount and play fine on the Xbox. On both my older and newer iMac, I have Mac OS X 10.5 Leopard installed, same version of Toast 9, and I burn at the slowest speed (2x) on both. So it seems that the problem can be isolated to the Optiarc DVD burner, but I'm not sure if there are other factors at play here.
I searched the Optiarc site (www.sonynec-optiarc.com) but could not find a firmware update for the AD-5630A. However, I did find this site via Google:
Liggy's and Dee's modified NEC and Optiarc firmwares
http://liggydee.cdfreaks.com/page/en/Optiarc-AD-5630A/
Because I was not sure about the site's reputation or validity of the firmware, I have not tried it yet.

Problem with DVD Player

I inherited this computer and have spent the last couple of months upgrading it. Put a gig of ram in and added a PCI card to help with a multi screen setup but now I have hit my first major head ache. I bought a Pioneer DVR - 104 off of ebay and installed it no problem. The only issue is once I went to test out my dvd feature I found I had no DVD player. I tried updating the system but it would not install it. So I finally was able to get 3.1 off of this site and it won't start up. It just blinks on the dock once and dissapears. I checked the specs and this machine came with the superdrive but my father opted out of it, why I don't know, so there should be no issues with the hardware, can anyone help me on this?
867 mhz G4 Mac OS X (10.3.9) 1.25 GB RAM, 60 GB HD, 3 Monitor Display

Hi-
I'm sorry the extras is in OS 10.4- my mistake. In OS 10.3, I believe the DVD player is in the main package. I couldn't find it to install seperately. So.......
Let me recap-
1- The DVR reads install discs
2- DVD's won't play because DVD player does not run
3- DVD-R discs show no response
So-
1- The DVR is reading
2- The version of DVD player may not be compatible
3- There is no burn support
To check burn support, in System Profiler, check if under Burn Support "Yes" is showing.
My current thinking is, that since there was no DVR in the origional configuration, you may need to reinstall (Archive and install) the OS 10.3 to get the proper DVD player installed. this should also configure burn support.
The other way to get burn support is to use the patchburn that I gave you the link to.
BUT, I think you should do things one at a time. My advice is to first get the DVR to read, play and burn in that order. There is obviously a problem with DVD player, so, unless some else can advise differently, I would try the Archive and Install of the OS 10.3.
It may also be good to run the OS 10.3.9 Combined Update:
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
trying the combined update now wouldn't hurt. If it does not remedy the situation, try the Archive and Install, then update.
Best-
Chris
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-110D,(IntHD)120&160,LaCie160,23"Cinema Display

Problems with DVD Player 3.0.1 in G4/466

Problems with DVD Player in G4/466
Yes, I've a g4/466 with two disks. In the first there's system 9.2.2 and the DVD player goes perfect. In the second I've system 10.2 and the 9.2, and the DVD Player (3.0.1) on the system 10 begins to jump in the dock, but stop and nothing happens, I can't open it...
There's any way to reinstal it form system disks???
Or any download to check the error?
Thanks

1. Try using Pacifist to extract it from your Mac OS X 10.2 installation disks, and then run the combo updater for your version of Mac OS X and any applicable DVD Player updates.
2. Open the Console application in the /Applications/Utilities/ folder and look for lines relating to the DVD Player.
(18543)

Problem with Wave Burner

Hi
I'm having a problem with Wave Burner hanging when I try to play audio files. The last time I used it, several months ago, all was well but now after importing my audio files and pressing play the program hangs up and can only be closed with force quit. This also happens opening saved files which played previously. Logic and Pro-tools are still working fine. No problems there.
Im using a digi003 with Core Audio. Logic 8.02 OS version 10.5.8. I mac 2.66 dual.
Any help would be appreciated. Thanks!!

I thought I'd try this again
In Wave Burner if I select the internal audio as playback it works. It's only when I select the Digi003 as playback that it hangs. It used to playback through the 003 fine.
Anyone?
Thanks!

DVD Player has problem catching up with DVD burned from DVD SP

I have a DVD with about 20 small videos and when I watch them either from the menu that plays the chosen video or from the Play All list I created with a story, it was often starting the videos already into the video by a second or sometimes a few frames. It did NOT do this in simulator or on the computer DVD player, but it did it on a few of the external DVD players I had hooked up to TVs. I played it on 4 DVD players and it had this problem on a handful of the videos on just two of the DVD players. They were always the same videos too.
So, I inserted a 15 second slug of video that I exported from FCP to give the DVD players time to process before the video actually started playing. The problem with this is that it moved the video track fine, but it moved the audio just slightly off from the video. The maddening thing is that it moves the video in such a way that it is off by part of a frame. How the heck does that happen????? And it won't let me move it to the nearest actual frame.
So, I need help. How do I fix it to where the audio still lines up to the video or how can I avoid the first problem so that I don't need to insert a slug?
I have to submit this DVD Monday morning to discmakers - help please!!!!

I suggest that you create 15-second silent audio slug that you can use to move the audio the same amount you have moved the video.
John Link

Problem with a burn

I created a project in iDVD that looks great while previewing in iDVD. I tried to burn it several times and it gets to the end and gives me a multiplexing error (something about progress error). The movie I've got going in is a .mov file from First Cut Express. Really frustrating to wait 20 minutes 4 different times to get the same result.

Hi
a. How did You go from FinalCut to iDVD ?
I do. In FCE/P Export as QuickTime.mov
NO - QuickTime Conversion
NOT - Selfcontained
b. How much free space is there on Your internal (start-up) hadr disk
Mine have a minimum of 25Gb when working with iDVD. IMPORTANT
c. What brand and type of DVDs did You use.
I only use Verbatim
Only DVD-R
d. Burnspeed ? The one on the DVD pack (auto selecting)
I do set it down to x1 but may be x4 is OK - x16 gives to many errors on my disks
Else read.
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

UDMA problem with DVD player

Hello,
I have a problem with my new MSI DVD player(model MS-8216M) :it will not work in UDMA mode 2 as it is supposed to in any normal, acceptable configuration. When I connect it as a secondary master or slave it works at multiword2 or PIO and will not go higher. It will only work in UDMA mode 2 if I connect it through my harddrive (but drops back down to PIO after a while)or when it is a Primary slave and my HDD is a Secondary Master (but also goes back to PIO after a while).
Here's what I have already tried:
Removing the secondary IDE channel in device manager, reboot and let windows auto-detect. Bought a new IDE cable. Re-installed windows twice since i bought it (Not upgrade).Tried various Master/Slave and IDE combinations (and always changed jumpers correctly).
Could someone please shed some light on this annoying
problem? I exchanged this drive twice already so I don't think that the MSI is at fault. Is it my motherboard? Please help.
Thank you
Nyah

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=63%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-8216M
see if that firmware is newer
what does bios say drive is can help with what firmware you have

Problems with DVD created in iDVD

I have a project I put together using Final Cut Express and Logic Pro. I created the DVD project using iDVD, and am having problems with the disks that I burn - they hang part-way through on various devices (after multiple burns).
I then saved the image to an .IMG file and tried to burn it on 2 different computers using different media (DVD+R and DVD-R) and at different burn speeds through Disk Manager. The disk burns ok, but fails validation with the message "Unable to burn ... (Verification of the burn failed.)"
When I mount the image on my local hard drive and play it through DVD Player, I experience no problems. This is really, really strange.
Brian

Nope. Can't do it that way. Much better to do a fresh install to each mac......or Unless you made a bootable clone of your existing HD with CCC or SuperDuper on a like mac system. Did you do this?
In other words, to clone an existing HD you'd have to format the ext. HD to mac os extended and then move the ext. HD to a similar mac from which you would boot you mac from like this:
Click Here
Hope this helps but if not just comer on back.

HP Pavilion DVD-3013eo recovery problem with dvd`s Win 7 x64

Hi, i have a problem with my dv7-3013eo pavilion, recovery dvd just wont work, they are original but here's the problem:
in recovery pavilion says something like this on start recovery program is not compatible of this version of windows, but it proceed, then it Boot's then the installation stars and then uiadump32exe crashes, and pavilion says start recovery again? that shall i do?
My windows version is WIndows 7 x64 Home, and computer is broken. dvd are fine and this is first time i have to use them.

Hi:
I don't have an answer for you, but I have a workaround if you can't get the recovery disks to work.
You will only have the option of installing the English, French or Spanish version of W7 Home Premium 64 bit.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to DVD's for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Now, instead of burning these to a DVD, use the Windows 7 USB flash drive installation tool available at the link below and follow the instructions on the page to install.
You will need a 4 GB flash drive or larger.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Paul

MSI 6380 Problem with DVD burner

Similar Messages

Maybe you are looking for