Msi-6390:cmos check sum error

please help me:
i bought a 6390-msi motherboard.
the problem is that when i start the system after checking the ram and cpu (it understand the correct cpu and the correct amount of ram) this message appear:
"Cmos check sum error.loaded default"
and when ever i change any thing in the setup program and save the changes (for example changing the boot sequence in the bios features) the system doesnt boot again and i have to clear the cmos by changing the jumpers.
i asked some expert ,they said maybe the problem is the battery ..but i changed the battery but the problem is still appear.
please help me ...
thx :(

There's a slight chance that you got a dud battery, or dirty contacts on the battery holder.
Check the battery voltage reading in the BIOS settings - it should be at least 3.0V (a fresh battery should be around 3.2V).
As I said, it's only a slight chance that it's the above problem, but when the obvious solutions don't work, you have to explore the more obscure choices.
Cheers

Similar Messages

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

Check Sum Error A215-7427

I have developed a new problem. Almost every time I start up the computer I get a check sum error. At first it would not come up at all, now it will after pushing <F1>, or going into bios. If I shut the computer down and immediately boot it up, there is no error. I have had a system battery error, but it doesn't appear very often and the date is correct.
Other symptoms include the battery level in the system tray always shows 100%, and plugged in, no matter what state it is in. The Fn key no longer brings the options down, nor does it put the computer to sleep with <FN><F4>. I have the computer set to put it to sleep when I close the cover, but that does occur either. When I put it to sleep, and open the cover it boots, gives me the check sum error and then tells me that windows did not shut down right.

You have multiple problems and probably are going to need multiple solutions.
Checksum errors are typically caused by settings in the Bios or the RAM. Make sure that you have the latest Bios. Next, go into the Bios and set the Bios to its default, Save & Exit. See if that takes care of the Checksum error. If not, look at your RAM. Remove one module, leave the other one in and see if that takes care of the Checksum error. If not, switch the RAM and try again.
Are you sure that the computer set to go to sleep when the lid is closed? Go to Control Panel. Click on the Power Options icon and then click on Change plan settings under whichever power plan that you are using. Now click on the "Change advanced power settings" link toward the bottom of the window. A new window will open. Click on the plus sign (+) to the left of Power buttons and lid. Finally click on the plus sign (+) next to Lid close action. Verify that the computer is really set to go to Sleep when the lid is closed. If not, hit the down arrow to select Sleep mode, click the Apply and OK buttons at the bottom of the screen and the sleep problem should be gone. If not, you probably have a Windows problem and may have to reinstall the operating system.
The FN key combinations are run thru the Toshiba Value Added Package for Windows Vista. Reload the program and try again. The program is on your Recovery CDs and this website.

Delete previous check sum error

delete from     Exception getObjectNameDefaultPSchema("L", "SNP_CHECK_TAB", "W") :
where     SCHEMA_NAME     = 'ODI_POC_TGT'
and     ORIGIN           = '(12002)COE_Project_Stock_Transactions.Int_Customer'
and     ERR_TYPE           = 'F'
Please help as to why I get this error again and again ?

I am also getting the same error ,This is because of colon (:) at the end of First line in your sql statement.If you delete this colon and restart the session then it will work properly.But i don't know Why this colon is added for most of CKM steps.
Jai

Error message "bad check sum" on Satellite pro 6100 when starting up

I recently tried to turn my laptop on when i got the message "bad check sum"(i think it said that) "check system press[f1] to continue. After i pressed f1 it came up an options screen i didnt do anything to it and just continued then it loaded and shut down again. also i have to lie the laptop on its back just for the first green LED to come on and when i have the battery in the charger does not charge the battery and even when it does start to charge and i try to put it on the same sequence of orange LED's appear .
so what does the message bad check sum mean ?
thanks

Hi,
That means that the cmos (bios) battery is low on power and you should hang your machine for minimum a day on AC because the bios battery loads then.
Such error appears when your cmos batt. is not full then the bios losts his settings and the checksum which would be performed by the system at startup will be faulty since the bios needs a check to know if everything is OK.
Its a security feature which indicates if your hardware is ok or not. If the error appears more than once, then you should bring your machine to a technician or at least a local servicepartner for a checkup.
Greets

Error in the generation of check sums of library

Hello
I am getting below error when trying to logon to xMII.
com.sap.engine.services.deploy.container.ExceptionInfo: Error in the generation of check sums of library files of application sap.com/xappsxmiiear in operation startApp.
This is a new installation on windows 2003 on SQL server.
Server is up and running clean with out any issues.
But not able to logon to the home page.
Regards
Basis Dude

Every time I have to manually start service "sap.com/xappsxmiiear " in VA.
But if I restart system it is not comming up automatically, I have to manually start again.
Any one had same issue before ?

MSI 870-G45 Checking NVRAM Hang

I just built a new computer, and it often hangs when restarting by doing one of two things.
1. It hangs at "Checking NVRAM" right after the HDD's are detected.
2. The motherboard beeps 4 times, and then says a BIOS update has been requested via USB. It does a little routine checking for a USB and then telling me I haven't inserted a USB 3 times before it automatically restarts the computer. Sometimes it'll beep 4 times again and do the same thing, sometimes it'll go into the "Checking NVRAM" error, and sometimes it'll boot fine.
Essentially, it's hit-or-miss if it'll hang or not on either of those. I'd say about 80% of the time it does.
Here's my specs:
Antec Three Hundred Case
Antec Truepower New 750W Modular Power Supply
MSI 870-G45 Motherboard
AMD Athlon II X2 255 CPU
Corsair VS2GB1333D3 2GB DDR3-1333 RAM (in the first slot)
ASUS Radeon HD 5450 Silent 1GB PCI-E Video Card
2 x DVD drives
6 x SATA drives
Here's what I've tried so far:
1. Disconnect everything except memory & video card
2. Boot motherboard out of the case
3. Reset CMOS via the jumper and by removing the battery
4. Flash BIOS with the newest version
Any ideas?

Fredrik, sorry but it's not nVidia ram
http://en.wikipedia.org/wiki/Non-volatile_random-access_memory

How can I change a check sum in a tabular form

How can I change a check sum in a tabular form?
I have added an extra field and now get an error when updating because I need to change the check sum, how do you do it?

Question asked and answered many times !
Insert a section break just before the page to move.
Insert a section break just after the page to move.
Select the page's thumbnail
cut
Insert a section break where you want to insert the page.
paste
The required infos are available in Pages User Guide which isn't delivered to help helpers to help you.
Yvan KOENIG (VALLAURIS, France) mercredi 5 octobre 2011 14:33:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Check Sum on downloadable files for linux e.g.linux_11gR2_database_1of2.zip

Which tool is used to verify check sums on downloadable files such as linux_11gR2_database_1of2.zip ?

Here is my blog which has answer to your question
http://oraclechamps.blogspot.com/2010/04/invalid-block-type-install-error-11g.html

My iphone 4 8gb is not updating or restoring to ios6.1.3 its shows sum error (21) or your iphone is not eligible for this build

my iphone 4 8gb is not updating or restoring to ios6.1.3 its shows sum error (21) or your iphone is not eligible for this build

Read this for error 21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Pavilion a1240n Bad BIOS Check Sum Starting Bios recovery

I have a Pavilion a1240n when i turn on the computer the first screen that comes up says Bad BIOS check Sum starting BIOS recovery
Checking for floppy...
Floppy not found!
Checking for CD ROM....
CD ROM not found!
Checking for Floppy...
Floppy not found!
It does this continuously and I cant get pass the screen any Ideas on what could be the problem and how I can solve this issue
Thank you in advance

Hi,
I have a Media Centre PC M7260In. I started the PC after many days. Now while i start the PC it shows the Error as below.
Bad Bios Checksum, Starting Bios Recovery
Checking for Floppy
Floopy Not Found
Check for CD-Rom
CD-Rom Not Found
I already done the procedure as per link.
1.Remove the Battery
2. Change Jumper setting without Power Cord and reset as default.
No Change Please Help
Thanks & Regards,
Shiju

Bios rom check sum

When I turn on my computer it says, bios rom check sum. I know nothing about computers and I would like any advice please thank you

Assuming this came up and there was no fiddling with the PC before this, then either the BIOS has been corrupted or there is another hardware problem. I would first try to replace the CMOS battery, then if that does not work, it might be time to consider replacing the motherboard or the whole PC. The spec page for that PC says it is from late 2007, which if the CMOS battery was never changed, then that might be the problem.

MSI-6390

The system is a msi-6390 with a 60 gigabyte hd, 512 ddr memory, CPU is a Athlon XP 1800, OS is win98se.
The system has been very stable. The cpu temp consistantly below default warning temp. Ok, the problem it won't start up. It doesn't even momentarily turn the power supply fan on it's as if it isn't getting any power. I have checked the power cord and it is good. I have checked the connections, and the switch(power supply& Case.) I dont have a another known good power supply to swap. I could go buy one easy enough though. I am simply asking if anyone has seen this symptom before?

no this board does not require that connector. I have two of these machines one is a Athlon XP 1800, the other is a Athlon XP 2100 the only differences between the two are the cpu's and peripherals. the 1800 is the one with the problem it is a stock system onboard s3 video, ac97 onboard sound and 512 ddr ram the other system (2100) is a MSI 6390(Same Lot) and it does not use the 12v aux connector.

Error in loading the WSDL file. Check the error log for more details

Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
Sachin

Hi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios

Msi-6390:cmos check sum error

Similar Messages

Maybe you are looking for