MSI 645 Ultra-C vs MSI 845 Ultra-C
Can somebody tell me widh mobo from this 2 is better.
For the moment I use MSI 845 Ultra-C but I'm not satisfy by it.
Its recommend to change it with MSI 645 Ultra-C (MSI 645 Ultra) or not?
Thanks.
I don't think that MSI 845 Ultra-C its a good mobo, I had problems with it from the 1st day I have it. I change it once. I don't know what to say I don't see some performances from my P4, and I think the mobo its the problem here. Or maybe its because I have just an GForce 2 MX400 and 128 DDRAM?
Now I just install WIN .NET Webserver Edition and it seems to work fine, but with WIN XP Pro its not working at all. Maybe you give some advices because I really don't know what to do.
Another ideea that cross my mind it was to chenge it with MSI K7N420 PRO + Athlon XP 1600+. Is this a better ideea?
Thanks
Similar Messages
-
Help needed pls!!! GF4 Ti4800 SE 8X on MSI 845 Ultra?
Hi folks,
I just purchased a GF4 Ti4800 SE 128mb 8X.
I own a MSI 845 Ultra ARU (6398), I understand this board only supports up to 4X AGP, but the GF4 card should be able to "downgrade" to work with a 4x motherboard, I hope.
Booting up is ok, but graphics start to tear on the window start-up screen. At the desktop, once i click the mouse, the desktop will hang like for 1 sec, then the monitor switch to Black screen, and then back desktop, this repeats when i click the mouse. There are also some weird colors here and there.
Can anyone pls advise?Quote
Originally posted by wonkanoby
serious vga card,is your psu in the same bracket
Hi there, thanks for ur prompt reply :D
hmm, sorry i don't realli what you mean by "psu in the same bracket"?
My PSU is a HEC 475W. -
OK VERY BIG PROBLEM!!!!
i built a computer from scratch, well old parts from my other computer!!the parts are 2.0gig intel cpu, 512ddr ram, 60gig harddrive, Msi 645 ultra(verison 1.1), geforce 2mx, and a 300W PSU. I put it all together fine I think . When i turned it on, Nuthing worked!!
I have the D-BRacket tool in the back and the lights first went 2 green top>1 green left, 1 green right which meant something like "Initialising Video Interface." and the computer didn't even work!!!nuhting, ZERO no bios no beep, but the power all worked. i fiddle around with things and Wen i turn it on again, the D-Bracket has ALL RED LIGHTS "CPU Damaged or inproperly placed" which is like impossible. ANd nuthing happens. I switch all my parts into my new one and nuthing is fried it all works!!put it all back together and the"Initalising video interface"lights happen again!!! i dunno whats wrong, maybe the mainboard partly fried or something i have no clue!! Monitor DOesn't show anything execpt a blank screen. Everything powers up but nuthing works!!What do you mean by multitasking not working? How? What happens?
In any event, you should be able to switch to another App by clicking the Home button and touching the other App. Restarting the iPhone should not be required. -
Hi, I have some problems with my computer.
Here is my configuration:
CPU: P4 1.6 ghz
Motherboard: MSI-6547 645 Ultra
Memory: 512 Mo DDR 266 mhz
video: MSI 8836 GeForces II GTSTi64
I build up this machine in January 2002 by myself and it work fine. But, this week my computer start to turn off automatically and reboot, after it reboot i can work on it for about 20 min. and then the same thing append. It even append to me when i was in the BIOS, so for sure its not a windows problem.
I have try another video card and i still have the same problem.
Any help would my appreciate, thanks.Quote
Originally posted by rounder
I also have a 645 Ultra that is doing the same thing. For me it started after I installed Windows XP.
Windows XP
MSI 645 Ultra MOBO
P4 1.8 Ghz CPU
512 DDR sdram
ATI Radeon 7500 All-In-Wondor vid card
Sound Blaster Live! 5.1 MP3+
maxtor 45 Gig HDD
Samsung DVD
TDK CDRW
Temp is a steady 122 F.
I can install a cheap vid card and I have NO Problem! ATI sent me a replacement card and it does the same thing, "Black Screen Lock-up" or just reboots. If both ATI cards are doing the same thing, there must be some kind of incompatability between XP and the 7500 AIW (no problems with ATI card and Win 98SE).
ATI has washed their hands of any future responsibility, so I am apparently stuck with a $200 vid card that doesn't work with my system.
Tell more about your system, bertz.
rounder
In my computer I had a Network-adapter which coused a problem of self-reboot when i tried to shut-down.
I replaced it with an older one - problems gone !!! -
P4 Northwood 533FSB on an MSI 845 Ultra ARU
Just got a simple question here. Have not been able to find an answer anywhere, so thought I would ask. Does the MSI 845 Ultra-ARU support the P4 Socket 478 533 FSB proc? I was running a 478 1.6 @ 2.1 on it, and wanted to get the pops a 2.4 to run on it, so he would not have to overclock. Game him the board, and Alpha, vid., and memory, and wanted to polish it off with this proc to get him off of the old 700 Athlon (just isn't right to keep yo dad @ 700 when you have 2 @ 2.1 :D ).
TIA for the input.
DarrellDoesn't support 533mhz FSB cpus. Only 400 but up to 2.6ghz. You can get your Pops a 2.4ghz 400mhz fsb cpu.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=34%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6398 -
Help with the MSI 645 Ultra!
I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?Quote
Originally posted by Confused_Bystander
I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?
ANy beep? -
Volcano 7+ on msi 645 ultra ver 1 . will it fit ??
well i want to get a thermaltake volcano 7+ A1254 for my p4 1.8a o/c to 3 Ghz on msi 645 ultra ver : 1 , but i heared that there is a problem between V7+ and msi 645 ultra ,they don't fit together ... is that true ,, please make things clear for me .....
thanksThe new ones are shipping with the new clip. Just make sure you don't get old stock. Contact Thermaltake about it - they sent me one free of charge.
-
just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ramHi,
Read the manual that came with your motherboard, it tells you were to connect the power button. Or, if that doesn't help you, I think you're better out turning your computer in at a service shop and let a trained technician do the work for you. 8)
Quote
Originally posted by golfer
just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ram -
Msi 645 Ultra C mainboars and windows 2003
hi,
does anyone have any experiences with installing windows 2003 on system with msi 645 ultra c mainboad.
please if you habe any experiences, email me at [email protected]
with regards
Igorspecification of pc on which I try to install windows 2k3:
celeron 2,0ghz. fsb 400 128k cache
mobo msi 645 ultra-c with o/b vga, sis 645 chipset
maxtor 40gh ata133 hdd
inovision toronado GeForce mx 200 vga w64mb
psu 300w
256mb ram apacer
problem is that after first rebut (setup initialization is O.K., drive is formated to ntfs file system and files are copied...)there is message "Error loading operating system" and system is in full stop. I could not find anywhere to see what is causing this message, could not find any experience with this chipset for windows server.
thanks for any kind of help or suggestion...
Igor -
What version PCI bus does the MSI 645 ULTRA-C Motherboard for Intel processors have?
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=315&MODEL=MS-6547
says 2.2 in description -
Help with motherboard MSI 845 Ultra-C
Hello, I have a problem with this motherboard:
When I connect something in the PCi slot, Windows recognize there are something there, but i can´t install it because it can't recognize the drivers. I tried to change the slot, I have installed the last drivers of the motherboard and there is no way to use the PCIs slot. All the things I have tried, works perfectly in another computer, i have the original drivers and they have work time ago. If anyone can help i'll very very pleased. Thank you!
edit: I have made a clear CMOS and it doesn't work
Forgive muy English, but i`m spanish.
In Spanish:
Buenas tengo un problema con mis puertos PCIs de una placa MSI 845 Ultra-C.
Cuando conecto algo a un puerto PCI (en concreto una tarjeta avermedia con sus drivers de casa, una tarjeta de red Realtek con sus drivers y otra tarjeta de red conceptronic c100i probadas en otros ordenadores y va perfecto) windows me dice q se a detectado un dispositivo pero nunca puede llegar a localizarlos, y ya creo q no es de los drivers. Sabeis de que puede ser?
Ya he probado a quitarlo y ponerlo en todos los puertos cada cosa por separado, han funcionado en este pc alguna vez tambien y ahora no van. Muchas gracias por su ayuda
Edito: Tambien he actualizado la placa base con los ultimos drivers q existianQuote from: Frankenputer on 25-January-08, 06:34:20
Would you please post what is in your system, including the Power Supply (manufacturer, multiple +12V rails or single +12v rail, and the amps on the +12V rail(s)). Please include the full specifications of your system(including the operating system). Look at my signature below to get some idea of what we'd like to know.
INTEL Pentium 4 1.6Ghz
256 MG DDR ram KINGSTON, 1 SLOT
motherboard MSI 845 Ultra-C VER:1
power supply: HipoMedia, model:ATX-250PCC12,
AC INPUT: 115VAC 7A 60Hz 230 VAC 4A 50 Hz
DC OUTPUT: +12V 13A 250W MAX
-12V 0.5A 250W MAX
NVIDIA GEFORCE MX400 VGA BIOS
HD: SEAGATE 40GB 7000rpp
DVD- LG 4120B
network card: conceptronic c100i
Avermedia AVerTV 103
windows XP Proffesional: including all sp2 updates.
I have already tried with windows XP Home Edition, windows 2000 Proffesional and Windows 98 Second Edition.
This is the information i know, if you need more, the audio is from the motherboard. Thank you again! -
MBO MSI 645 Ultra and Ati Radeon x1650pro 512MB agp
I tried to upgrade my comp. with new graphic card Ati radeon X1650pro, 512Mb, AGP. X1650pro works great 3 days and then colapsed. When I became a new one from shop, It hapen the same: work great 3 days and then colapsed. I dont know what to do. I have old MBO MSI 645 ultra, intel pentium 4 on 2,4 Ghz, 1280 RAM, 80Gb + 120Gb hard drives, Samsung DVD player and LG DVD-RW... I think this motherboard dont support Ati Radeon X1650pro graphic card. I have before Ati Radeon 9600pro 256Mb and it work perfectly. Dont tell me that its time to buy all new (MBO, procesor, etc...) Regards from Croatia...
If you place Ati 9600 back in system, is all OK?
Could be faulty 1650pro card...........
Please couls you list all components in your system......... -
MSI 845 Ultra-C and Western Digital WD1600BB
Hi!
I've got a problem with a MSI 845 Ultra-C based computer.
It worked before but there were problems with it's HDD and I wanted to install a new and bought a Western Digital WD1600BB. I connected the IDE drives like this:
IDE1: Western Digital WD1600BB (Master)
IDE2: Samsung Combo drive (Master) and the Other 80GB HDD (Slave)
The problem is that it doesn't detect the combo drive. When I push the button on it tha tray opens and everything looks nice except the bios. Before that the 80GB HDD and the combo worked well.
What should I do ? I would like to know if this motherboard can handle 160GB HDDs.
By the way this is my neighbours PC so please answer quickly if you can.
THXhttp://www.msi.com.tw/html/products/mainboard/testreport_pdf/6566/hd.pdf
120 gb was biggest they tested so 137 may well be largest -
MSI 645 ultra xp / 2000 problem please help.
I've got 3 MSI 645 ultra mobos. I've tried every thing i can think off to get xp installed and working. I don't get as far as formating the hard disk in the setup. I relpaced the power supply with a qtec 550 watt power supply (the gold one). i've flashed the bios to 1.9, i've used different hardisks and cables. I've checked the memory PC2100 and 2700. It's a pentium 4 1.5, I've tried a 2g in it as well. I'm using an ATI radeon 7500 but have tried a s3 agp card. All the other components work fine in another machine but not on my 3 MSI boards.
Please help some one out there must have had the same problem. I'll buy the first person who fixes it cakes!!!
Ta
GusHi,
I ran memtest 3.0 and there were no errors. it ran for 9 hours.
I am only using one hard disk at a time. it's set as a master on IDE1 and the CDrom is on IDE2 as a master. should I use cable select?? I also tried the hard disk and CD on ide2 and that did not work either.
Ta -
MSI 845 Ultra C with sound card???
I recently bought a P4 2 Ghz with MSI 845 Ultra C, Geforce 4 Ti4200 128.
A few weeks later i bought a simple sound card with surround support. Now when i try to install this software (Xp compatible) i get the error that the sound card is not installed and that the data is incorrect. I use the latest drivers from the internet. I believe this problem had to do with the onboard sound card of the motherboard. Is there anyway i can disable that???it is an XP bug, you might try windows update to see if MS fixed it.
Here is for example ATI's doumentation of the error.
I assume the bug won't be fixed by the update, so in that case you need to reinstall XP with the card already insalled in the slot.
Maybe you are looking for
-
Browse animation effects causing Bridge to freeze
Every time I select browse effects from the animation menu, Adobe Bridge launches (as expected). When I navigate to the "Text/Blurs" folder and open it, Bridge freezes. I know I can add an effect to my text without resorting to Bridge, but I'm follow
-
Ae crashing when opening project
Since of yesterday AE started crashing when opening a project which i worked on a few weeks ago. We opened it on a PC, saved, with a new name. and it would open just fine. When reconnecting the files (AI-drawing) it crashed again. Renamed the drawing
-
I'm using a macbook pro and its fairly new and when i put my email address into app store i forgot a letter and now i cannot download updates, help?
-
Pointing existing RAC nodes to a fresh Shared Storage discarding old one
Hi, I have a RAC Setup with the Primary Database on Oracle 10gR2. For this setup, there is a Physical Standby Database Setup (using DataGuard configuration) also with 30min delay. Assume that the "Shared Storage" of the Primary DB fails completely. I
-
C:windows\system32\comdlg32.ocx failed to load
well most of the treads i see about this are in spanish and needless to say i don't speak another language i only know english so regretably i am asking how i can go about getting comdlg32.ocx to load correctly on windows 7? every time i try to load