MSI 645 ultra xp / 2000 problem please help.
I've got 3 MSI 645 ultra mobos. I've tried every thing i can think off to get xp installed and working. I don't get as far as formating the hard disk in the setup. I relpaced the power supply with a qtec 550 watt power supply (the gold one). i've flashed the bios to 1.9, i've used different hardisks and cables. I've checked the memory PC2100 and 2700. It's a pentium 4 1.5, I've tried a 2g in it as well. I'm using an ATI radeon 7500 but have tried a s3 agp card. All the other components work fine in another machine but not on my 3 MSI boards.
Please help some one out there must have had the same problem. I'll buy the first person who fixes it cakes!!!
Ta
Gus
Hi,
I ran memtest 3.0 and there were no errors. it ran for 9 hours.
I am only using one hard disk at a time. it's set as a master on IDE1 and the CDrom is on IDE2 as a master. should I use cable select?? I also tried the hard disk and CD on ide2 and that did not work either.
Ta
Similar Messages
-
Java and MS SQL Server 2000 problem, please help
please help me. I am using java and MS SQL Server 2000, and I'm trying to access and verify the login. I'm getting the following error message: [Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index
Can any please help in this regard.
String userNumber = (String)userNumField.getValue();
char[] userPasswordArray = userPasswordField.getPassword();
String userPassword = new String(userPasswordArray);
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:odbc:Dikolobe_Data");
java.sql.PreparedStatement statement = connection.prepareStatement(
"SELECT USER_NUMBER, USER_PASSWORD, USER_CLASS, USER_STATUS " +
"FROM SYS_USER " +
"WHERE (USER_NUMBER = ? AND USER_PASSWORD = ?);");
statement.setString(1, userNumber);
statement.setString(2, userPassword);
java.sql.ResultSet result = statement.executeQuery();
if(result.next()) {
String userStatus = result.getString(4);
if(userStatus.equals("logged on")) {
String loginErrorMessage = "User with number: " + userNumber + " is already logged on.";
javax.swing.JOptionPane loginErrorPane = getNarrowOptionPane(72);
loginErrorPane.setMessage(loginErrorMessage);
loginErrorPane.setMessageType(javax.swing.JOptionPane.ERROR_MESSAGE);
javax.swing.JDialog loginErrorDialog = loginErrorPane.createDialog(null, "Login Error");
loginErrorDialog.setVisible(true);
else {
String userClassification = result.getString(3);
if(userClassification.equals("Administrator")) {
AdminHomePage newAdminHomePage = new AdminHomePage();
newAdminHomePage.setVisible(true);
else if(userClassification.equals("Educator")) {
EduHomePage newEduHomePage = new EduHomePage();
newEduHomePage.setVisible(true);
statement = connection.prepareStatement(
"UPDATE SYS_USER SET USER_STATUS = ? " +
"WHERE USER_NUMBER = ?");
statement.setString(1, "logged on");
statement.setString(2, userNumber);
statement.executeUpdate();
dispose();
}Doesn't the following link give you enough information?
http://www.google.com/search?q=invalid+descriptor+index
Anyway .. This error means that the given ResultSet column index which you're trying to retrieve the value from is out of the range. -
MSI 645 Ultra - Bios Toasted! Need help
Greetings,
A year ago I attempted to flash my bios on my 645 ultra, but really screwed it up (I flashed from windows). Don't ask why I did that, apparently at the time I had a brain fart! hehe. So anyways, how do I revert to the original bios? Anyway to recover? When I power up the board, it doesnt even POST...
Am I screwed? ;(
Thanks for the assistance guys 8)Best thing would be to have someone with an EEPROM programmer to burn it, or get a replacement from MSI.
A very risky trick, dont do this, if you do and screw EEPROM or a perfecly well working MOBO up dont blame me.
But sometimes someone has and old dont care MOBO and well your EEPROM is pretty useless so someone might try the BIOS swap trick (I warned everybody):
1. Get BIOS and programingsoftware
2. Find a PC working, turn it on boot on the DOS disc
3. Take the BIOS out - DO NOT shut down the power
(this is the dangerous part)
4. Put the wrongly programmed BIOS in the empty socket
(this is the extremely dangerous part
5. Program the BIOS
6. Turn of and put bios back in their right MOBO -
I have an MS-6457(v2.X) ATX mainboard with a D bracket but the two USB ports on the bracket do not work I have tried plugging in my usb mouse but nothing happens. I have plugged the lead in to both jusb1 and jusb2 but no go, is there some way that these ports need to be turned on? thanks for any help. Ron
looked in the bios they are already enabled are the ports in this "intergrated peripherals" the ones mounted on the motherboard? The ones I am having problems with are on the D bracket connected to the board with a fly lead. I have looked at the motherboard settings with Si Soft Sandra and at the end of the report there is a warning" W2533 disabled host controllers are present check bios" but I can not find any other settings to try apart from the one you mentioned which is already enabled any other ideas? Thanks Ron.
-
Hi, I have some problems with my computer.
Here is my configuration:
CPU: P4 1.6 ghz
Motherboard: MSI-6547 645 Ultra
Memory: 512 Mo DDR 266 mhz
video: MSI 8836 GeForces II GTSTi64
I build up this machine in January 2002 by myself and it work fine. But, this week my computer start to turn off automatically and reboot, after it reboot i can work on it for about 20 min. and then the same thing append. It even append to me when i was in the BIOS, so for sure its not a windows problem.
I have try another video card and i still have the same problem.
Any help would my appreciate, thanks.Quote
Originally posted by rounder
I also have a 645 Ultra that is doing the same thing. For me it started after I installed Windows XP.
Windows XP
MSI 645 Ultra MOBO
P4 1.8 Ghz CPU
512 DDR sdram
ATI Radeon 7500 All-In-Wondor vid card
Sound Blaster Live! 5.1 MP3+
maxtor 45 Gig HDD
Samsung DVD
TDK CDRW
Temp is a steady 122 F.
I can install a cheap vid card and I have NO Problem! ATI sent me a replacement card and it does the same thing, "Black Screen Lock-up" or just reboots. If both ATI cards are doing the same thing, there must be some kind of incompatability between XP and the 7500 AIW (no problems with ATI card and Win 98SE).
ATI has washed their hands of any future responsibility, so I am apparently stuck with a $200 vid card that doesn't work with my system.
Tell more about your system, bertz.
rounder
In my computer I had a Network-adapter which coused a problem of self-reboot when i tried to shut-down.
I replaced it with an older one - problems gone !!! -
Help with the MSI 645 Ultra!
I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?Quote
Originally posted by Confused_Bystander
I've got a very frusturating problem. I just bought the MSI 645 ultra mobo to upgrade my system, along with a brand new P4 2.0 GHZ processor and 512 mb DDR ram to go onto the board. My problem is as follows: The computer is not booting up. No OS, no BIOS, no nothing. When I turn the power on and hit the switch, all the hardware in the case starts up and sounds fine... but the screen remains blank. All four lights on the little diagnostic tool/usb port thingy that came with the board stay red, which, according to the manual, indicates a problem with the processor.
The processor is either bad (highly unlikely with it being an Intel chip) or for some reason its not working with the mobo. So, heres my question: Does an Intel P4 2.0 GHZ Northwood processor work with the MSI 645 Ultra?
Under the list of supported speeds, 2.0 ghz is not listed ?( . Can anyone tell me whats going on here?
ANy beep? -
Msi 645 Ultra C mainboars and windows 2003
hi,
does anyone have any experiences with installing windows 2003 on system with msi 645 ultra c mainboad.
please if you habe any experiences, email me at [email protected]
with regards
Igorspecification of pc on which I try to install windows 2k3:
celeron 2,0ghz. fsb 400 128k cache
mobo msi 645 ultra-c with o/b vga, sis 645 chipset
maxtor 40gh ata133 hdd
inovision toronado GeForce mx 200 vga w64mb
psu 300w
256mb ram apacer
problem is that after first rebut (setup initialization is O.K., drive is formated to ntfs file system and files are copied...)there is message "Error loading operating system" and system is in full stop. I could not find anywhere to see what is causing this message, could not find any experience with this chipset for windows server.
thanks for any kind of help or suggestion...
Igor -
Volcano 7+ on msi 645 ultra ver 1 . will it fit ??
well i want to get a thermaltake volcano 7+ A1254 for my p4 1.8a o/c to 3 Ghz on msi 645 ultra ver : 1 , but i heared that there is a problem between V7+ and msi 645 ultra ,they don't fit together ... is that true ,, please make things clear for me .....
thanksThe new ones are shipping with the new clip. Just make sure you don't get old stock. Contact Thermaltake about it - they sent me one free of charge.
-
just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ramHi,
Read the manual that came with your motherboard, it tells you were to connect the power button. Or, if that doesn't help you, I think you're better out turning your computer in at a service shop and let a trained technician do the work for you. 8)
Quote
Originally posted by golfer
just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ram -
Power supply for MSI 645 Ultra mother board
I need to replace the power supply for a MSI 645 Ultra mother board. I've available a switching power supply Allied model DR-B500E, that doesn't have the -5V output (infact its 20 pin ATX power supply connector has no wire in pin 18).
Can I use this power supply with the MSI 645 Ultra?
Thanks in advance for any help.Hi, here I am. Sorry for delay but I had some problems with the PC (as NTLDR missing).
However now is ok and I can confirm that it runs ok also with power supply without -5V output.
Thanks a lot for the support and best wishes for Christmas and new year. -
MSI 645 Ultra - AmiBIOS 3.31a
Hi,
I did not plug in the connector for the CPU stock fan as my stock fan uses those white, red, yellow cable for power. Hence my motherboard will keep beeping that it's High Temperature since it "did not" detect my stock fan running.
My question is, how do I turn that alarm off? I remember doing it before but I forgot.
MSI 645 Ultra - AmiBIOS 3.31a
Thanks in advance ...Quote
Originally posted by NovJoe
I'm out of ideas too...
Maybe you should just remove the chassis speaker connectors from the mobo . This is the simplest way to 100% solve the sound problems... but many implications to it also .
Woah .. there should be a way around this ......
anyone can help ? -
[TV@Master] Problem please help
I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please helpi meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now -
P6N Lots of problems please help
P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information. -
System D.O.T automatically why? problem please help me
hello everybody,
please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
MSI CD ROM
SONY FLOPPY
COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
AMI BIOS 3.4
SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !Hi,
Go to here for MSI LIVEUPDATE
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
Install and run program.........
BIOS problems:
http://www.msi.com.tw/html/support/bios/note/boot.htm
If you would like to download bios and install........
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
You can also choose 3.7 if wish too first.....
I am sure this will help you.
Del -
990fxa gd80 raid 0 problem please help me i am begging you
so i will start with my set up
990fxa dg80 mb
fx 8350 cpu
780ti
8 gig of ram
256 hdd
2x samsung 850 evo
750 hybrid drive
So at this stage all my data is on the 750 hdd and the disk is stored away. my problem started with me buyng 2 mx100 256 ssds . If my bios is set to ide or ahci they work fine i had my windows instaled on 1 of them all woks fine. Once i switch my bios to raid ( before i set up my raid 0) boot up win 7 instalation i do not see any drives ( i know is normal) load the drivers for the raid controler (sb950 for w7 as it says in themanual) and only my 256 hdd shows up but not the ssds . Than i set them up in ld raid 0 same problem . Tryed on another 2 mbs ... 1 same and a gygabite same problem. So i was sure there is a problem with ssds. I got rid of them got 2 new 850 evo 250 gb same problem. please help me i am so desparate i am willing to pay woth body organs for helpI..have a few questions...
1. You set BIOS to the RAID mode, and under that option there's a Board SATA RAID ROM, do you set it as Legacy ROM?
2. Did you enter Ctrl+F to initialize the drives/Delete Array(If they're used SSDs) and create RAID0?
3. Is your Win7 64 bit or 32 bit?
4. I assume it's 64 bit, did you copy the W764 folder for driver loading?
And make sure you get the driver from here:
http://www.msi.com/support/mb/990FXAGD80.html#down-driver&Win7 64
Maybe you are looking for
-
MacBook wireless issue (ongoing) & DIY airport card replacement
Hello, With reference to the ongoing MacBook/OSX (10.5.3) Leopard intermittent wireless issues discussed in this forum has anybody gone ahead and taken matters into their own hands and purchased and installed a new Airport card for their MacBook from
-
Which jar file is required for jsp dynpro page programming ?
Hi all: I use NWDS wizard to create one small jsp dynpro page application. However the project has some errors, it said " This compilation unit indirectly references the missing type com.sapportals.htmlb.page.DynPage (typically some required class
-
HT1420 I can't find the store menu... where's it at?
i can't find the menu in the itunes store help me!!
-
i have 10.9.4 on my mac, and i need Wireshark to work, because we use it in lectures (in my education,, i'm not english speaking by birth).. I have installed Wireshark 1.12.0 and there no prob starting up when its not connected to XQuartz, but it kin
-
Hi, I want to create workflow for the documents created like notification creation, order creation, etc., What are the steps to create. As I am fresher to create work flow, kindly clarify me in detail with the step by step procedure, Regards, Mah