MSI 645Ultra bios 1.9B1 with Fast-Writes option.

you can get it from here:
http://members.optusnet.com.au/boris_m/ms-6547-191.zip
Im using it btw.

nah not official... remember when i was complaining about this board that it doesnt support fast-write and stuffs.... well that complaint got the msi engineer going... assaf gave me this bios to test it out and i hooked boris with it also...  so feel free to test it...
as for me it seems nothing so far... it just feels like they added option on the bios for it, nothing amazing really =D

Similar Messages

  • MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -

    MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -
    coz i want to enable it so i can get higher 3dmarks score.
    so i'm wondering if it supported but i think it doesnt but not sure.
    k thx.

    I am assuming here, that it is always on and that turning it off isnt a option via the less than robust bios' that MSI gives us.  That being said, there is a utility called NVMax that allows you to switch it on and off as well as 2x/4x agp, assuming again, that you have a NVidia graphics card.  
    Try that Emazy, Im curious to see if you get lockups like I do when I check it off.  For me at least, it appears to be on, but greyed out.  Sisoft says that it is capable of fastwrites but not enabled.
    As I mentioned before and as Assaf confirmed, the difference is negligeable and in most cases causes to instability.
    I think Fast Writes was as big a hype as MMX was. :]

  • MSI 865PE-NEO2-FIS2R AGP Speed & fast writes

    Does anyone know how to enable either or both of these items I have just purchased an ATI 9800 Radeon and my AGP speed is only 4X and fast writes are not enabled ?

    First let me say thanks for your input.
    From within my driver tab SMARTGART I have 2X, 4X, 8X it is set at 4X if I slide the slider to 8X it makes me reboot and it's still at 4X.
    I Have a P4c 2.40 @ 3.0 Ghz
    Thermalright SLK-947-U with a 92mm fan
    Hercules All In Wonder 9800 SE softmodded drivers turning it into a 9800 Pro
    OCZ PC4000 Dual Channel 4 x 256 MB CL3 DDR EL Memory @ 500Mhz
    4x Maxtor 80GB Hard Drives
    If I put the same card into my other computer with an AMD XP3200 on an Asus A7N8X it boots into windows by default at AGP 8X
    Any ideas ? I know some motherboards I have had have this option in the bios.

  • Kt3 ultra and 9600xt fast write

    Amd Barton 2500
    dr. thermal ti-77n
    Kt3 Ultra standard mobo w/5.7bios
    Antec performance II sx835II case w/350 psu
    Corsair 512 2100 x3
    Ati 9600xt
    Audigy ZS gamer
    as some of u may be aware the 9600 family of cards are very picky about fast writes. In order to run games without lock ups/crashes i must enable fast writes. The problem is that when i do, i get corrupt text, lines around my cursors, video lag etc etc. I recently switch to a barton 2500 that is running a 1.87ghz at 133fsb, before i ran an 1800 that did not have any of these problems with fast write enabled. bios and xp recognixed it as a 2500+ and i have the ratio set to auto and memory set to HCLK. I tried varios drivers for the gfx card and all produced the same results. Also tried all combinations of bios fast write on gfx control panel off, on etc. any ideas?
    TIA
    -leo
    pic of lines/box around cursor

    fast write disabled = game willl lock, the 9600 family of cards are notorious for this, i was able to fix my corrupt text and cursor problem by moving the slider under troubleshooting in the ati panel down a notch. in game im still seeing some problems though, hopefully the game specific forums can give me some help. thiis is really annoying because the dam game ran fine with my 1800 i went to the 5.09 drivers on the reccomendation from another forumite.
    screeny to show in game problem for those that care
    www.theoldschoolers.com/Forums/uploads/post-11-1134154170.jpg
    anyways this is more specific game related matter now, but i figured id post up a follow up for u guys anyways

  • K8t neo fast write on/off?

    Should i keep agp fast write(6800 gt) on or off, i heard some k8t owners had problems with fast write...

    See here:
    http://www.pctuning.cz/Default.aspx?CatID=75&LayId=2&ArtId=19189&ChapID=4944
    Just look at the graphs, you'll get the idea.

  • Regd FAST refresh option in a Materialized view

    Hi All,
    I am using a pipeline function in which I am creating a table of records and a few cursors to fetch data from various tables.
    Now this PL/SQL table is being used to construct a Materialized view.
    Creation of Materialized view is happening fine but not with FAST refresh option. It gives an error " Cannot create a FAST refresh Materialized view from a complex query."
    The query which I have used for the view creation is
    CREATE MATERIALIZED VIEW CUSTOM.ABC
    PCTFREE 0
    BUILD IMMEDIATE
    REFRESH FAST ON DEMAND
    AS
    SELECT A.Number,
    A.Guarantors_Number,
    A.Guarantors_Name,
    A.Personal_Garantee_PCNT,
    A.Company, LG.Source_System,
    A.Type_of_Info,
    A.File_Gen_Date,
    A.Periodicity
    FROM
    TABLE(CUSTOM.CDM_LG_PACK_PF.CDM_LG_FUNC) A;
    where CDM_LG_PACK_PF is the package and CDM_LG_FUNC is the pipeline function I have written to fetch all the records.
    Please help me on how can I do a FAST refresh on this materialized view.
    Thanks in advance,
    Gaurav

    Welcome to the forum!
    FAST refresh doesn't mean that the operation is fast (time wise), it means it's an incremental refresh.
    If you have a complex query, you can't use a FAST refresh - that's what the exception tells you.

  • How to disable AGP Fast Write with MSI 875P Neo-FIS2R ??

    How can I disable AGP Fast Write with the MSI 875P Neo-FIS2R ? I can't find an option for this in the BIOS !

    You wont usually find this option in most MB BIOSES , as the only Option that SOME BIOSES Have is the Option to enable, disable SBA (Side Band Addressing) for the AGP Bus....In order for you to Disable or Enable the FW, You Must have the Option in your Vidio Drivers Controll Panel.....If you have a NVIDIA Card, you Must go to  http://www.guru3d.com  And Download the program "NVHardpage" and then Open the Program and you wil have the Choice to Enable these options and they will then appear in your Vidio driver CP >> "Activate "Coolbitts" (this is NVIDIAS Overclocking Utility) Activate "Harware Options", and then Activate "AGP Options" and finally Activate "Performance Options"........If you have a ATI Card then you must Download one of thier "Tweeking Utilities".......I will Post the Direct "Link" for NVHardpage in a Minute, just say yes to the Lic. Agree. and download......Here>> http://download.guru3d.com/nvhardpage/  ...........Sean REILLY875

  • Fast writes enabled in BIOS but not in Windows 2000

    WPCID and SiSoft Sandra report that fast writes is disabled despite being enabled in BIOS.  When fast writes are enabled with NVMax, all games crash within 30 seconds.

    Hi there:
    Do you have Windows 8.1 Pro or Enterprise 64bit OS edition?
    Please read this:
    http://blogs.technet.com/b/canitpro/archive/2014/03/11/step-by-step-enabling-hyper-v-for-use-on-wind...
    http://windows.microsoft.com/en-in/windows-8/hyper-v-run-virtual-machines
    Additional:
    http://www.howtogeek.com/196158/how-to-create-and-run-virtual-machines-with-hyper-v/
    http://www.eightforums.com/tutorials/2493-hyper-v-how-use-windows-8-a.html
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Airdisk - SLOW read speed, but FAST write speed with Leopard 10.5.1?

    I've been complaining for a while about my random problems with reading files from airdisk. My solution has always been to relaunch finder and re-mount the airdisk when it slows down.
    I just noticed the speed cut down to and when looking at the activity monitor, it's fluctuating up and down and never seems to go past 1.5 to 2 MB/s.
    HOWEVER, what I did just notice is that my write speed is consistently 3-4 MB/s with no fluctuation at all. Interference is not an issue, as I'm on N-only mode and in 5GHZ.
    Is there anything I can do aside from waiting until 10.5.2? This does this issue in every AEBSn firmware. Thanks.

    I experience the same problem (slow read: 2,8 MB/s, fast write: 6,3 MB/s) with my airdisk over a LAN-connection with 10.5.2. I atteched the USB-drive directly to my iMac and then it's the other way around: fast write, slow read (although considerably higher and normal throughtputs so drive is OK).
    Anyone having some suggestions? The airdisk is formatted as HFS+ (GUID) with journalling on, Airport firmware 7.3.1 and the most recent updates installed.
    Message was edited by: jnmen

  • MEGA 865 Deluxe with MSI DR8-A 8x8 DVD±R/±RW Writer

    Hi everyone,
    I am just about to put this box together, please advice..
    Heard any compatibility issue on this one? IE, ejecting problems or loosing functionality in PC or HIFI mode? or any issues at all....
    MEGA 865 Deluxe with MSI DR8-A 8x8 DVD±R/±RW Writer
    It will be a bummer if I go put this together and it doesnt work properly. That will be money down the tube.
    Thanx.

    I have the same box and optical device. I have yet to get an audio CD to play completely through in HiFi mode. It will play for 3 to five minutes and then quits, LCD reads No Disk. I can get it to start up again with no problems but it only plays a few minutes at a time.  It works fine in PC mode both in playing Audio CD's and DVDs so I am guessing that my problem lies in Hi Fi circuitry/or wires. I believe you should be able to use the 865 in Hi Fi mode without O/S, Memory, or even a CPU. Good luck.
    DS

  • Enable fast writes 845g msi mobo

    just downloaded sisoftware sandra and in mainboard information it tells me that my mobo supports fast writes but they are disabled.  ?(  would this affect video perfomance? and if so how do i enable them?

    They are usually enabled in bios or in display properties if they are supported (sisoft sandra is not always right about this).  In some cases the hardware may contain the capability but can not be enabled.  The actual performance difference is measurable in bench tests but may not be noticed in actual use.

  • BIOS Mod MSI 1763 GT70-20D whitebook with a 4700MQ and 780M

    Hello svet,
    hello community.
    i have a MSI 1763 GT70-20D whitebook with a 4700MQ and 780M, sold by a german manufacturer called "Hyrican". The laptop performs well, but I would like to have all options. Yet, I don't know if its possible with my Notebook to flash a custom BIOS?
    here is my information:
    BIOS Version E1763IMT.70A (do i need a update? Is it old?)
    BIOS Build 07/08/2013
    EC VERSION 1763EG61 Ver5.06
    EC BUILD 07/23/2013
    intel core i7-4700mq @2.4ghz
    intel haswell graphocs
    dimm1 8192 ddr3
    dimm2 8192 ddr3
    donation:  6UM66611NA340921Y
    thanks in advance and great job!
    best regards

    hello,
     you mean to unlock all bios options or/and some other kind of customization?
    Quote
    BIOS Version E1763IMT.70A (do i need a update? Is it old?)
    will pm you shortly for query

  • REQ - MSI U270 BIOS mod with unlocked UEFI option

    Hi guys, I'm new to this board.
    I've searched everywhere and couldn't find any MSI U270 BIOS mods. I'm trying to upgrade to the Windows 8 BIOS, but since the update package can only be used under UEFI mode, I'd have to enable UEFI in my BIOS. BUT, there isn't an option to do that, and there isn't a DOS version of the BIOS update either.
    Thanks in advance.

    unlocked bios won't help you with this

  • Msi star key 2.0 3x faster wireless network adapter with windows 7

    Hi,
    I have msi star key 2.0 3x faster wireless network adapter product. Could anyone please provide me information whether it is compatible with both 32-bit and 64-bit Windows 7 operating system? Thanks in advance.

    Quote from: tempaccount1234 on 05-April-11, 19:27:06
    Could anyone please provide specific information? Will the Vista drivers work for Windows 7. I am not able to use them. Is there any setting required? Please help......
    No Vista drivers often do not work in W7.
    You better buy a new device that has W7 drivers.

  • [Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

    Hi,
    I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard.  Most of the peple can't use their graphic card in all situations.
    My PC is :
    -MSI K8T NEO-V
    -AMD-64 3200
    -Power : 400W
    -ATI RADEON 9800 PRO
    -1 Go DDRAM (2x512 in single channel)
    -Hercules Digifires 7.1
    I bought a new MSI K8T NEO-V with AMD 64.
    The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
    But in AGP 4X, all the game run without problem with all setups of BIOS !!!
    I tried all the drivers (the new and the old drivers).  Even if all are updated, it freeze.
    There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
    So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
    Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

    What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
    You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
    If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

Maybe you are looking for