MSI 648 HT READY-BUY WHERE?

Can anyone tell me where I can buy an MSI 648 HT Ready mother board.  I bought the MSI 648, but I have a p4 3.06 and want to be able to use the HT.
Thanks

No worries.  I returned the 648 and got a super micro.  It was more expensive, but the super micro does what it says it does.......   :P
Yes, MSI is a bit mysterious with the HT ready boards.  Not only is it impossible to find the 648 HT ready, but also the 655 HT ready.  Very sad indeed.   I would have prefered the MSI, only because it has a few more features.  But the super micro board supports HT, has 8x agp, so I go with that.
Bummer.

Similar Messages

  • Why msi 648 max HT ready cannot be OC

     ?( The problem is :
    The bios has an option in the frequency/voltage control menu called
    AGP/PCI Frequency (MHz)
    which gives me the ability to adjust the pci/agp bus clock frequency.
    This option doesn't work, and my clue is
    1-  When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and this
    option to 66/33 the computer boots normally until it starts loading the O.S.
    and errors saying that the OS cannot start due to lost system files, or Read
    Write error to Aux device, or it hangs.
    2- When I adjust this option to 80/40 and the CPU FSB to Auto (100 MHz), the
    computer boots normally and load the O.S. normally and everything goes just
    fine. and Sandra software reports the PCI clock frequency as 33 MHz.
    Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
    My system is:
    Msi 648 MAX  ver1.1 HT ready
    Intel P4 2.4Ghz 512KB bus 100 Mhz
    Msi MX440SE-T AGP 64MB DDR
    WD 80GB 7200 HDD
    Samsung 52-24-52 CD-RW
    Creative modem blaster v.90 di5655
    P.S. Logic 300W
    Win 98SE & WinXp
     ?(

    648 Max HT Ready CPU Support Status

  • MSI 648 Max-L

    MSI 648 Max-L (MS-6585) SiS 648 P4 (533FSB) Skt478 DDR ATX Motherboard w/Audio, LAN Retail
    400/533FSB, ATA/133, AGP 8X, 3DDR DIMM, 6PCI, USB 2.0, Audio, LAN, Bluetooth Pin
    93.49
    ok my question is... im sorry i just wanna make sure i buy the right motherboard ok ?
    can this motherboard support
    intel p4 3.06 Hyper threading
    1gb kingston ddr 333
    40gb ata133 7200 rpm
    maybe msi geforce fx the new one but i cannot find it on my online retail store so i probably going to buy an ati 9500 pro 128mb 8x
    windows xp prof...  this motherboard comes with ata133 cables for my HD?
    whow will work my system and whow much time my motherboard is going to work
    if this motherboard dont support the above config. plz sugest me any other motherboard... that will work perfect or just sugest me any other better version of mobo u guys have... and plz tell me where i can buy the msi geforce fx plz ...and for whow much thank u guys

    Make sure you get the HT Ready version. Utilizes the 648bo chipset and also has a sticker on the box. Im not exactly  sure how to distinguish the 2 different types because the model numbers are EXACTLY the same.
    Support Hyper Threading..
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=417&MODEL=MS-6585
    Doesn't Support...
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585
    -rob

  • Overclocking on an MSI 648-E Max

    Heres are my pc specs:
    P4 2.4Ghz B Processor (533Mhz FSB)
    80GB Seagate Baracuda
    MSI 648E Max ( Bios 1.5 - No HT)
    512MB DDR333 CL 2.5 Ram
    300 Watt PSU
    Geforce 3 Ti200
    Heres the prob :
    My FSB is @ 133Mhz, but as soon as i increase it above 140, the system becomes very unstable. Anything above 145 and the system does not boot.
    I have my Ram set @ Cas 3 , Normal Timing, MA1, 2.6V and @ 167Mhz.  I have even tried increasing the CPU VCore to 1.575 and the DDR to 2.8 - alas it does not work.
    I want to atleast get the CPU to about 2.6 Ghz stable.
    However, im not sure where the problem lies - ive tried just about all the options in the bios.
    Is there perhaps something i can do to fix this?
    MY PSU Says the following:
    +3.3V - 15.0A
    +5V   - 25.0A
    +12V  - 12.0A
    -5V   - 0.6A
    -12V  - 0.6A
    +5VSB - 1.5A
    Oh and my Ram is Apacer with Infineon chips on it. Please help - thanks

    Don't bather yourself I have the same problem.
    MSI FAKED US ALL A BIG ONE.
    The problem is in the option AGP/PCI Frequency (MHz)
    It doen't work and my clue is:
    1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and set this option to 66/33 the computer boots normally until it starts loading the O.S. and errors saying that the OS cannot start due to lost system files, or Read
    Write error to Aux device, or it hangs.
    2- When I set this option to 80/40 and the CPU FSB to Auto (100 MHz), the computer boots normally and load the O.S. normally and everything goes just fine. and Sandra software reports the PCI clock frequency as 33 MHz.
    Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
    My system is:
    Msi 648 MAX  ver1.0 HT ready S.N.(648 Max0304165360)
    Intel P4 2.4Ghz 512KB bus 100 Mhz
    Msi MX440SE-T AGP 64MB DDR
    WD 80GB 7200 HDD
    Samsung 52-24-52 CD-RW
    Creative modem blaster v.90 di5655
    P.S. Logic 350W
    Win 98SE & WinXp

  • Wanna OC msi 648 max

    I wanna try and oc this damn thing and see how it goes but my bios is retarded. if i change anything in it it will not start. no post no screen no nothing sits there and i think hdd light goes on but nothing is actually going. for me to go back i have to clear cmos and i have tried diff bios versions and all the same. so what the heck can i do? i plan on buyin new board and drives soon as seeing all msi crap sux. dont know y i bought em all there a bunch of liars. so if anyone got a way other than buying new board cuz thats on way just wanna see what this one got.  

    Don't bather yourself I have the same problem.
     :O MSI FAKED US ALL A BIG ONE. The problem is in the option AGP/PCI Frequency (MHz)
    It doen't work and my clue is:
    1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and set this option to 66/33 the computer boots normally until it starts loading the O.S. and errors saying that the OS cannot start due to lost system files, or Read
    Write error to Aux device, or it hangs.
    2- When I set this option to 80/40 and the CPU FSB to Auto (100 MHz), the computer boots normally and load the O.S. normally and everything goes just fine. and Sandra software reports the PCI clock frequency as 33 MHz.
    Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
    My system is:
    Msi 648 MAX  ver1.0 HT ready S.N.(648 Max0304165360)
    Intel P4 2.4Ghz 512KB bus 100 Mhz
    Msi MX440SE-T AGP 64MB DDR
    WD 80GB 7200 HDD
    Samsung 52-24-52 CD-RW
    Creative modem blaster v.90 di5655
    P.S. Logic 350W
    Win 98SE & WinXp

  • MSI 648 Max - help???

    I Bought the MSI 648 Max (HT ready) in April this year...
    Link
    Now i would like to buy a new cpu, and i was looking at getting a 3ghz, but the board details state that it can support a 2.8 and up??? what is this "and up"??
    Should i just go for a 2.8???
    any suggestions would be great!
    "Supports Intel® Pentium® 4 processor in the 478 pin package.
    Supports FSB at 400/533 MHz (100/133 MHz QDR)
    Core frequency from 1.3 GHz to 2.8 GHz and up"

    The Proccessor that i was looking at..
    Intel® Pentium 4 3.06Ghz / 512K / 533FSB 478-pin (Boxed)
    New P4 revision based on 'Northwood' 0.13 micron core +
    512Kb L2 Cache. Supports Hyper-Threading. (HT enabled)

  • What show 2nd termo-controller on a MSI 648 MAX?

    Hi from Russia.
    I have 43 motherboards MSI 648 MAX (HT-ready).
    My computers spontaneously freezes. I think, that this problem because of overheating motherboard chipset. Motherboard Monitor showing t80 Celsius on a 2nd termo controller. This is error, or really big temperature of a SiS chipset (t80 on all motherboards)?
    And i have other problem in a Counter-Strike.I press ESC when i play in OpenGL mode and i have black screen with freeze (video GF4 Ti4200 AGPx8 )
     Maybe anybody know how solve this problems?
    Please sorry for my english.

    Did you ever resolve this?  I have a similar problem
    Machine has been running with a 512 Mb/333 MHz module in slot 1 for 2 years with no problems.  I want to increase the memory size.  Tried adding all sorts of combinations of other modules, but won't boot.  I went out and purchased a compatible Kingston 1 Gb/333 MHz CAS 2.5, compatible according to Kingston site.  The memory counts to 1 Gb, and everything POST seems to work. I get a beep, and then nothing.  Trying different slots, the same problem.  The 512 Mb works in all slots, but not the 1 Gb. 
    What is the fix for this MSI memory upgrade issue?

  • Msi 648 max question

     ) hi,
    my motherboard is 648 max.. and I have a graphic cardwith 32mb memory.
    in the system setup where the agp memory is I can only toggle between 32 and 64..
     ?( dose that mean that I can't use a 128mb graphic card? ?(

    Good day,
    Here is the specs of the PC:
    Processor : Intel(R) Pentium(R) 4 Northwood 2.40GHz
    Mainboard : MSI 648 Max (MSI MS-6585)
    Memory : 2 x Apacer Technology 512MB DDR400
    Video Card : NVIDIA GeForce 6800 AGP
    Hard Disk : ST380011A (80 GB)
    DVD-Rom Drive : LITE-ON DVD SOHD-167T
    CD-Rom Drive : ASUS CRW-2410A
    Network Card : Realtek Semiconductor RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter
    Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
    PSU : ProCase SH-400WA8/P4
      +5V 
    +3.3V
    +12V 
    -12V 
      -5V 
      40A 
      22A 
      15A 
    0.8A 
    0.5A 
    I will run MemTest86+ later and report back the results.
    Best regards

  • How do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

    how do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

    Where is this example spreadsheet? Without seeing it I can only guess at what you are asking.
    To make a drop-down list (a pop-up menu in Numbers-speak), format the cell as a pop-up then edit and add to the list of items.
    If the example spreadsheet is pulling in a dollar value based on what car you chose in the pop-up, it is probably using LOOKUP or one of the other lookup functions, getting the information from another table (a lookup table). If, instead, these dollar values are what you are choosing in the pop-up, then you need to create a pop-up with these values in it.
    The Help menu includes a link to a page where you can download the Numbers Users Manual. It also has a link to the Formulas and Functions guide. Both are useful to new users.

  • Hello, I have paid the application ADOBE PREMIERE PRO CC, in Creative Cloud still shows "buy", where is the problem?

    Hello, I have paid the application ADOBE PREMIERE PRO CC, in Creative Cloud still shows "buy", where is the problem?

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Sound Problems with MSI 648 Max ( MS-6585 ) Board - Help !!!

    Hi,
    i have the MSI Mainboard: MSI 648 Max ( MS-6585 ) and when I put on the microphone i have a bad sound on my soundboxes like scratching or beeping.
    I have installed a new BIOS update and new Sounddrivers.
    I have Win2000 with SP3.
    Anybody can help me???
    THX  ;(

    Error404,
    I since you have a 648 Max and you posted in the Multimedia Forum, I moved the thread to PIV Motherboard  Forum for you.
    Good Luck,
    Richard

  • Can't update my AGP driver MSI 648 Max-L

    Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
    When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
    What seems to be wrong?
    Specs:
    WinXP SP1
    MSI 648
    512MB PC2700
    Radeon 9700Pro
    Thanks in advance!

    Quote
    Originally posted by zardoz66
    Hello, I have the MSI 648 Max-L (SiS 648 motherboard).
    When I try to update the SiS AGP driver from 1.13 to anything newer (the latest is 1.16a), nothing happens. The installer fails to run.
    What seems to be wrong?
    Specs:
    WinXP SP1
    MSI 648
    512MB PC2700
    Radeon 9700Pro
    Thanks in advance!
    I'm having the same problem while trying to istall SiS AGP driver 1.15 but i have no previous versions installed though.

  • MSI 648 max problems, please help

    Just put a new machine together and I am having some problems, hopefully someone can help.
    My machine seems to run pretty stable in OS, but dies when any game is played. It will crash anywhere from 2 minutes - 45 minutes in the game. Ive tried several games: C&C generals, unreal2, etc with the same results.
    Bios are updated and nothing is overclocked. Win XP is fully updated.
    Specs:
    MSI 648 max, 533fsb
    p4 2.4 northwood
    Seagate 80gig hd 7200rpm
    MSI g4 ti4200
    2 - 512mb pc2700 ddr333 dims (double sided)
    Antec 350w ps
    sb live
    48x liteon cdrw
    16x liteon dvd
    We are using a Kingwin KT-436S-WM case
    http://www.kingwin.com/product.asp?cid=15&pid=75
    It has a total of 5 fans with intake/exhaust
    HSF currently being used is the retail box HSF
    With the case sides on,  here are temps at idle after 10 minutes in OS:
    Proc: 136
    System: 91
    Vid card: 118
    With the case sides off, here are temps after running 10+ minutes in OS:
    Proc: 125
    System: 86
    Vid card: 114
    Here is the error that pops up (after crashing) when playing Command and Conquer: Generals:
    Technical Difficulties
    Sorry a serious error occured
    Thanks in advance

    Well my roomate cancelled the memory test after 12 hours, so I dont know those results.
    I do know that after removing 1 of the DIMMS, the machine seemed to be stable playing games.
    I sure wish MSI would have stated it only accepted 1 double sided DIMM.. especially when the reccomend Kingston ram, which is double sided......
    Me and my roomate BOTH bought this motherboard, while my roomate only bought 2 DIMMS of 512, I bought 3!!!!!!!!!!!!!!!!!!!
    So now it looks like we need to return these motherboards and get new ones... I HAVENT EVEN GOT MINE OUT THE BOX!!!!!!!!
    Any reccomendations on an MSI motherboard (or any) that support  double sided DIMMS? I am looking for 3 slots...
    thanks...
    Any other advise on how to get this motherboard to work with all this ram would help too, so we dont have to RMA through newegg....
    Anyone from MSI read this board?????
     X(    :O  ?(

  • MSI 648 Max - Display Problems

    I recently bought the MSI 648 Max motherboard, as my system needed an upgrade quite badly.  To cut the costs down a bit, I’ve used some parts from my previous system (eg the video card which is an 2x AGP, 64 Mb, Kyro based card) but got new RAM, CPU and psu.
    I put together the system (described below), loaded Windows ME, updated all drivers with latest releases, and the thing works but the quality of the display is really bad    ;( .  That is, I get lots of video artefacts (shadows, fading text, vertical lines, distorted colours, etc).  The video card was working fine on my other machine.  Also, Sisoft Sandra says that the card is operating at 2x AGP, as it should.
    I am not overclocking; some of the BIOS parameters I used are as follows (based on the OPTIMAL DEFAULTS):
    AGP Aperture Size                     128 Mb
    DRAM CAS Latency                      by SPD
    Timing Setting Mode                      NORMAL
    MA 1T/2T Select                      AUTO
    Primary Graphics Adapter      AGP
    Allocate IRQ to PCI VGA      NO
    CPU/DRAM Frequency Ratio      by SPD
    DRAM Frequency                      167 MHz (for now)
    CPU Frequency                      133 MHz
    AGP/PCI Frequency                      66/33
    DRAM Vcore          2.6 V
    CPU Vcore         AUTO
    The system temperature showed in the Health Status is less than 40 C (104 F).  
    I have tried the latest AMI BIOS (version 1.3), and then reverted to version 1.0, but I still have the same display problem.
    I would really appreciate some help.
    Ciao
    mystro
    ========================================
    Windows ME (v4.90.3000)
    Pentium4 CPU 2.4 GHz (133x18.0), FSB 533 MHz
    MSI SIS648 Max  (MS 6585) ver. 1.0
    2 x 256 MB Corsair DDR400 (CMX256A-3200C2, CL = 2-3-3-6-T1,
    Hercules 3D Prophet Kyro 4500 TV Out (Kyro I not II) 64 Mb, AGP 2x, 175/175 MHz
    IBM 40GB 7200RPM UATA100
    Mitsubishi 40x CD-Rom
    Yamaha 8424S CD-RW
    Adaptec 2930U SCSI card
    Eagle 350W psu, 190W (combined 3.3V & 5V)  

    boards agpx4 and 8 only so i dont advise using that card
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585

  • Intel 3.06GHz on MSI 648 Max L

    Hi,
    I have a question; if I were to purchase in the future a P4 3.06Ghz processor which supports HT, will it work on my MSI 648 Max without hyperthreading just as a normal processor? I understand that hyperthreading does not work on this board (the one without the udated chip). I'm just curious if the processor itself is supported. I don't see why not, it should just work as a single 3.06 processor. Thanks in advance.
    Razvan Scutaru

      I have the 3.06 running in mine , and the board is the one that does not have HT.. and it works just fine..
      The only thing that I have found is that you cannot run 400 mghz ram in it with spd setting.. you will have to go and set up the setting manual and then it will work.. don't ask me why I can't find it out..lol..
      But other than that it is one fast computer..
      also if you set the ram setting to anything other than  the fast setting  it will default back to 2.5 on the cas setting..
      But after running bench marks I can't see any improvement by running at a cas of 2..
      Also if you have a black screen when you are working with the bios you will have to clear them and reboot .
      I had one that gave me problems but it was the PSU that was causeing it.. 400 wat but in real load it was only putting out 328 wats..  and that will not work with a 9700 pro in this board.. at least it would not on mine.

Maybe you are looking for

  • I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion? to use icloud.

    Apple keep telling me I need to update to icloud but I'm not sure if Lion will work on my Mac. I've upgraded to snow leopard which seems to have knackered my .me or .mac account (whatever it's called now), so I don't seem to have any option but to up

  • Changing Field Labels of module pool screen dynamically

    Hi All, Can anybody tell me how to change field label of text field in dialog screen dynamically. The Screen/Transaction is standard one. I have created a Enhancement point for this change in one of PBO module's subroutine for this screen. This Field

  • Enemy territory and doom3 mouse annoyance

    I have three options:- 1. Do not disable dga in xorg.conf- :- If my move my mouse too much, some of the movement data is stored in some buffer or something. Press any key or move the mouse some more, this movement data stored in the buffer gets relea

  • Transferring information from G4 tower to Pro

    I have a G4 tower w/ 3 hard drives named Macintosh HD, 60GB Hard Drive and Main HD. The 1st came w/ the computer - the 2nd is on top of the 1st. The third is an ATA drive running off of a Sonnet Temp ATA133 adapter card. In starting up the Pro wanted

  • Error in a simple example

    Hi I'm trying to make a simple example working. The example was taken from director 11.5 scripting reference pdf. The code is in the function called BuildPolygons whithin a Movie Script. I also added a 3D window to the cast (menu Window/Shockwave 3D)