MSI 651 Combo / MS6769 Problem with Temperature

Hi. I´m having some troubles with my mb, since 2 weeks ago. Suddenly, it starts to appear that cpu temperature go 70 º C (158 º F), and i hadn´t do anything. I changed the cooler, and put some new grease, and nothing happen. Then i searched in this forum, and i found a message simmilar, that said something about upgrade bios, and thas what i recently do (WS6769 v1.0 originally, then V1.3, then V1.2). But nothing...
What should i do? buy another mb? I don´t want to.
Thanks.
Claudio

Well, i´m pretty sure that it is the mother board, because, i already changed all what´s possible to change: processor, RAM, hd, power supply, processor.
Din: I don´t know what´s "corecenter". I already upgraded BIOS (to v1.2 that supuestly fix my problem), and put thermal paste (grease? in spanish "pasta disipadora") between CPU cooler and CPU. And i do change the processor (i put a p4 1,8GHz), with other FAN processor (CPU cooler), and the same temperature.
Danny:Those details you ask me:
In a label on the power supply (lVoltage MAXAmpere): +5V 30A, +3.3V 20A, +12V 15A, -12V 0.8A, -5V 0.5A, +5Vsb 2.5A.
It is a Maxpower 300 Watts ATX, model PX300.
On BIOS PC Health: Sys Temp: 18ºC/66ºF, CPU Temp 66ºC/150ºF (up to 70ºC), CPU Fan speed 2909 RPM, Vcore 1.68V, 3.3V 3.26V, +5V 5.10V, +12V 12.03V, -12V -12.19V, VBAT(V) 3.26V, 5Vsb(V) 5.14V.
I have a Celeron 1,8 GHz, socket 478, a MSI 651 Combo MS6769 Motheboard, with nothing else. Hd Maxtor 30Gb, Rewriter MSI 52x24x52.
The problem: From one day to another, it wasn´t load XP. It resets itself after a few seconds (about 5 secs). On the BIOS PC Health section, i actived the CPU Temperature beep on "too much degrees" (i don´t remember the exact name, but that´s the idea). And that´s how i realize that the temperature is the problem. I think it is how the motherboard inform the temperature, and it is a nominal temperature, not real. If it´s real, i already had a burnt processor.
Anything else that can help to find a solution for me?
Very thanks.
Claudio

Similar Messages

N560GTX-Ti problem with temperature

Hi,
I am owner of MSI N560GTX-Ti Twin Frozr II/OC graphic card and I have some problems
with temperature. I don't know if it is normal, but when i turn on my computer, I have temperature about
30°C (running only programs like steam, icq) and when I start some old game like MW2 or CSS, temperature
rises from 30°C to more than 70°C! and I think it is too high. Fan is working on 100%.
I have windows 7/64bit, newest drivers and windows often tells me when I'm playing game that i should change my desktop
to less demanding. I'm not sure if im translating this good :(. Later I can post that warning.
Please, what should I do? It is normal? or should I buy new fan or what? I don't know what to do.
Thanks for any reply

1, I have 3 fans in my case. Here is photo.
2, This is how my graphics card looks like from behind.
Hope this will help

HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

R7970 problem with temperature sensor?

So last month I RMA'd my R7970 and I just received it in the mail. Originally my problem was I had artifacting lines, and occasionally freezes. In the time between that I had ordered a 5450 just as a temporary card.
When I got my 7970 back I removed the 5450 and placed the 7970 in its place. However after booting up my computer the fans started going on max speed every few seconds while online. I looked at the temperature according to afterburner and it says its at 70c where my previous card was probably around 50 during normal use. I tried playing skyrim but it's not the funnest thing to play when you have the sound of a fan blowing at 50 mph. And while playing this the temperature went up to ~95c
The reason I'm thinking theres a problem with the censor is that I felt the exhaust from the pci slot and though it was warm, it was not 95 degrees of hot. I turned off the computer and took out the graphics card and placed it back in thinking that was the problem but its still just as loud. I figured I'd post here first and see if maybe I did something wrong before contacting MSI directly.
My specs are:
CPU: AMD 8350
mobo: gigabyte ga 990 fxa ud3
gpu: R7970-2PMD3GD5
psu: corsair cx 750
ram: gskill 16gb ddr3 1600(?)mhz

Hi I've replaced the paste on two msi 7870 as they do an awfull job of applying by putting about six times to much on. I used a Noctua NT H1 non conductive paste just a very tiny pea size and the temps have dropped by 10%c on both cards. They are now in crossfire mode and pretty quiet although obviously they run hotter in crossfire mode but max out at 65%c. I had to RMA one of these cards just two weeks ago as the temp diode set the fan at full speed once it hit about 60%c which was intolerable as I expect yours is. They sent me a replacement card and didn't query that I had broken the warranty seal when I replaced the thermal paste. I'm surprised at how hot your 7970 gets although I've never used one is that normal for this card, is it in a decent sized case, is something stopping one of the fans from moving eg a power wire etc. sounds silly but I had this problem with a small form shuttle a motherboard wire had to be reouted on a twin fan card for that reason. Hope you get it sorted

MSI CD53, i5 750 - Problem with CPU Fan Speed

Hello
I have problem with this counfiguration: i5 750, MSI CD53 Motherboard.
I Have processor overheating poblem. I noticed that processor easly can go up to 90C.
I check phisycal installation, and all its ok.
After that i check RPM of CPU FAN and i noticed that it cant go over 1000 RPM, so propably this is problem.
In MSI Control Center maximum i can set 1000 RPM.
I read that CPU FAN can go up to 3000 RPM.
Maybe i have something wrong set up in bios? What can i do with this?

Quote
CD53
Which board exactly do you have?
What is your current BIOS Version?
What kind of CPU-Fan are you using (3-Pin or 4-pin PWM (four wires) and which connector is it attached to?
What are your current fan speed/control settings in BIOS Setup?
Quote
I check phisycal installation, and all its ok.
Physical installation is one thing, but what about thermal paste (have you used a PROPER amount (too much thermal paste has the opposite effect))?
What about your case ventilation?
Quote
I noticed that processor easly can go up to 90C.
Please check the CPU's core temperatures with CORE TEMP, REAL TEMP or HW-MONITOR!

MSI X52P Combo Drive Problem...

Hello all
I recently purchased the MSI X52P Combo CD-RW / DVD-ROM drive to replace my old CD-ROM drive. Installation went well, XP Pro booted up, installed it's own ATAPI COMBO52XMAX driver and the drive appears as DVD/CD-RW Drive in my drive listing as expected. The only problem is, it will not read any disc in a normal XP Pro boot.
After investigating, the drive reads discs perfectly using my old Win98 boot disk which uses a different ATAPI driver (the drive flew through a dir *.* /s on the bundled 600MB odd Nero CD in seconds) and also works perfectly in Safe Mode.
As it worked perfectly in Safe Mode I took that opportunity to install Nero. I then rebooted and discovered that I can use the drive to burn a CD with Nero in normal mode (which reads perfectly in another drive) but again in normal mode won't read any discs including the one I burnt. I'm just trying to remember what the differences between Normal and Safe Mode are. They both use the same driver but doesn't SM use Real Mode Drivers?
Anyway, so far I've tried...
Every combination of IDE channel / master slave setup possible.
Updating the firmware, it's now the 1.40 version.
Checking this forum, seems other people have had similar problems.
A bucket load of things that perhaps only mad people would try.
For the record, there are no device conflicts and AMIBIOS reports it as VER 1.40 ATAPI COMBO52XMAX on boot up. Note, I have been building / tinkering / playing with PC's practically all my life but this is really the first time that I have been stumped with a hardware problem.
Any help / suggestions / ideas would be greatly appreciated. I know the drive works perfectly, just not in normal mode

AHA!
Getting somewhere.
Device Manager - IDE ATA/ATAPI - Secondary IDE Channel - Properties - Advanced Settings
Changing Transfer Mode from 'DMA If Available' to 'PIO Only' caused the drive to immediately spring into action and read discs of all types. However, I'm not happy with that so will fiddle further. PIO mode is processor intensive whereas DMA mode uses the disk controller to transfer data to memory without lugging the proc.
So without looking I am guessing that the difference between Safe Mode and Normal Mode is that Normal Mode tries to use DMA first whereas Safe Mode just uses PIO to be safe. My hard drives are happy chugging along in DMA mode so I'm sure the X52P should too.
Hope this information is useful to anyone else having difficulty reading discs.

MSI R7870-2GD5T/OC problems with fans

Greetings.
I just bought this card and got some problems with fans: when temperature of GPU rises above 52-55 degrees fans start spining at maximum speed.
Tried fix that using MSI afterburner/Catalyst control center - no effect, fan speed showed as I set up, but the tachometer shows 4400 rev / min, which is confirmed by the characteristic sound.
I hope that there is a fix for this beacause i cant RMA my videocard, I accidentaly lost the box, and since I paid 190€ i would like to have some support from MSI.
Thanks.
Edit: Noticed now that here nobody work for MSI, well an help would be great anyway

the Original box doesn't matter if its gone as MSI don't like them in original box as they won't return the card in it.
as long as you have the original receipt from your purchase and the Graphics card your all good....
as for the problem your having it will be a leak current on a faulty safety catch diode (201) as they got a bad batch a while back that when it gets hot it opens the fan circuit to maximum as it thinks the card is overheating. (either remove it carefully (as long as you do not damage the card your warranty is still intact as the removal of that component is what MSI suggested when the issue first showed up) or RMA the card)

MSI 915P Combo FR problems

Hello people! I have problems with my mobo , my mobo is :
"Motherboard ID   63-0100-000001-00101111-022306-GrantsD$0AAAA000_915P/G COMBO A7058IMS V1.9 02/23/06" ( everest copy/paste) . Now i have updated my bios to the 1.9 version, the latest available, before that, the mobo would not accept double sided DDR1, and after the update the problem persists, and i think one of the ram slots is not working properly , beacause it won't accept DDR1 single or double sided.
Does the latest bios-update contain previous versions?
Please help me , i want to upgrade my RAM and i can't find single sided memorys anywhere . Thank you in advance.
My configuration is:
CPU Type   Intel Pentium 4 531, 3000 MHz
Motherboard Name   MSI 915P Combo-FR (MS-7058)
Module Name   Corsair VS512MB400C3 ( single sided )
Video Adapter   NVIDIA GeForce 6600
Audio Adapter   C-Media CMI9880 @ Intel 82801FB ICH6 - High Definition Audio Controller [B-1]
Disk Drive   HDS722525VLAT80 ATA Device (7200 RPM, Ultra-ATA/100)
Optical Drive   HL-DT-ST DVDRAM GSA-4165B ATA Device
Network Adapter   Realtek RTL8139/810x Family Fast Ethernet NIC

What's the exact problem ?
you have one stick of ram and the system fails to boot with it ?
or you added ram and the system fails to boot ? or does not detect the extra ram ? ...

MSI VOX TV@nywhere -- Problems with blinking in down side of the window

I write to you because i saw your site and posts on forum.
First sorry for my bad english,but i need help...
I bought MSI USB TV@nywhere card yesterday, and i install
the drivers etc, but i have problems with connection on
COMPOSITE and S-VIDEO. When i set device to any of that two
connections and play video form DVD component player, i got a
picture and sound but i have some blinking (blinkering) efekt in place
of subtitles (down bar on the MSI PVS window).
First i have black bar on the screen,and behind is playing video, and if
I change types to PAL-B or any other, then it starts to blink and gets me
picture same like upper side of the window with blinking effect (name of the
connection is blinking on that "bar" in the application window).
on TV i have no problems, it works good.
i download new driver but i have the same efect...
did anybody have same problem, or you know how to make it works normaly?
thanks for all....
Dejan

I write to you because i saw your site and posts on forum.
First sorry for my bad english,but i need help...
I bought MSI USB TV@nywhere card yesterday, and i install
the drivers etc, but i have problems with connection on
COMPOSITE and S-VIDEO. When i set device to any of that two
connections and play video form DVD component player, i got a
picture and sound but i have some blinking (blinkering) efekt in place
of subtitles (down bar on the MSI PVS window).
First i have black bar on the screen,and behind is playing video, and if
I change types to PAL-B or any other, then it starts to blink and gets me
picture same like upper side of the window with blinking effect (name of the
connection is blinking on that "bar" in the application window).
on TV i have no problems, it works good.
i download new driver but i have the same efect...
did anybody have same problem, or you know how to make it works normaly?
thanks for all....
Dejan

Problems with temperature (Outlook 2013)

Hi guys,
Anyone had any problems with the temperature in Outlook as I have?

Hi,
We have the same Issue.
I have turned off the Exchange-Cache-Mode via accountsettings in Outlook. Restarted Outlook. Et voila! The Problem is gone. After that, I reenabled the Cache-Mode and the bug is still gone. But a few days later the bug happens again in the exact same way.
When I change the weather location there is no fix. Changing the location alters the file C:\Users\%username%\AppData\Local\Microsoft\Outlook\RoamCache\Stream_Weather_randomhashvalue.dat. Deleting that file doesn't help either.
The Problem is definetly client-based. Outlook 2013 (32-Bit) only. It appeared after 14.10.2014 which was teh Patchday for this month. Maybe it is a bug in an update? Maybe this one?http://support.microsoft.com/kb/2889951
I'll try to uninstall this Hotfix.

MSI FX 5700 Ultra problem with linux

Hi,
I know that linux are not officially suported by MSI VGA cards, but NVIDIA based VGA cards use to work under linux. I've got a problem with a recent purchase and until now I didn't found any answer.
Here is my problem, if anyone here have an idea :
I recently upgraded my video card Geforce 2 MX to a Geforce FX 5700 Ultra from MSI (FX 5700 Ultra TD128).
I've an Athlon XP 2000,
motherboard Gigabyte GA-7VAXP, 512 Mb,
distrib Mandrake 9.2
latest nvidia driver 5328
At startup after installation, Mandrake detected a new hardware, but it was not the right card name. The video test failed and X (graphic mode) didn't start.
Back to console mode, I discovered that even the console mode doesn't work properly : I have no cursor and the screen lines don't scroll up when the screen gets full (very hard to type commands or edit files).
I checked the XF86Config-4 : for me it seems ok. Actually, it didn't change from the previous card.
I've no errors in the XFree log (no lines with (EE)).
I went to the MSI site to look for a newer bios version, but there is'nt.
I tried both DVI and VGA connection with my LCD monitor, same thing.
I also tried running Knoppix (liveCD distrib), same prob.
I pasted below the message i've got on screen when I try to start X manually (this doesn't help much either) :
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
It seems to me that this graphic card simply doesn't work under linux.
Thanks a lot for any help.

To get X to work with your LCD during the installation process append nofb as one of the installation options.
I have a 17" LCD so you might like to compare the relevant sections in your XF86Config with these:
Section "Module"
   Load "dbe"
   Load "extmod"
   Load "fbdevhw"
   Load "glx"
Load "dri"
   Load "record"
   Load "freetype"
   Load "type1"
EndSection
(The Load "dri" gets removed prior to installing nvidia's Forceware drivers.)
Section "Monitor"
   Identifier "Monitor0"
   VendorName "Monitor Vendor"
   ModelName "CML174SX"
   DisplaySize 340   270
   HorizSync 24.0 - 80.0
   VertRefresh 56.0 - 75.0
   Option    "dpms"
EndSection

MSI P45 NEO2-F Problem with FSB 480+

Hey
Maybe someone of you can help me with this mobo. I try use fsb 500 with stable. My best @ its now 445x7,5 on my E8200
If i set 500x6 i have stable in orthox on 3-4h but if i try play game or i try use 3dmark system down.
Help please if someone know whats going on here.
My PC:
MSI P45 NEO2-F ; E8200 - Noctua NHU-12P ; A-Data 2x2gb extreme edition 1066+ ; 2x Samsung RAID0 ; GF 8600GE ; Enermax 625W
Maybe ist RAM problem??
Oh and i cant set GTL on 63-67% it's possible only on CPU GTL REF0, on ref1 and mch gtl i dont have this percentege :(

Quote from: lycanwrath on 25-December-08, 12:52:40
Hi man,
I too have problem with the GTL settings in my MSI P45 Neo2.
I do not hav sufficient GTLREF Settings on the BIOS(Not high enough)
Do u have a BIOS that can fix that?
If so can you give me the link plz.
Lycan i use now bios from oroginal msi site. its 3.3 - and on this bios i have full stable fsb 500 in auto set of course.
Even more i can say you - copmuter lunch on fsb 550 and GTL still on auto - but its unstable.
If someone have suggestion how to set a GTL please help - i real feel power of fsb 533

MSI P67A-G45 (B3) - Problems with USB3 & Updates & card reader, etc.

Hi, I have the MSI P67A-G45 (B3) motherboard and I'm still having problems with it (as from day one).
1) I still seem to have some problems with stability with the USB. I updated the drivers for the Renesas USB to the latest (2.1.39.0) from the station-drivers website,
I was thinking of grabbing the firmware update as well. But I wasn't sure if I should. The page also shows firmware updates for uPD720200 & uPD720200a, and I'm not sure which one is in my motherboard. Should I update? If so, which one is in my MB, uPD720200 or uPD720200a?
2) I'm also having trouble updating the Intel ME Driver and the Intel INF Update (although I'm googled that the INF update doesn't really matter).
3) I can't seem to get the firewire port working with my WD Home 2TB external HDD (it works through USB though).
4) I have an old internal flash card (SDHC/MS/MMC/etc.) reader from another desktop that I wanted to add to my MSI one. Is it possible to do so? Where would I plug it in?
5) Is there anything else I need to update: software or firmware? I've generally updated the stuff listed in the Live Update (except for the stuff I never installed).
Thanks. Please answer any of the questions if you can.

Quote from: xmad on 13-June-13, 01:03:41
Update the firmware and re-test:
>>Firmware and BIOSes<<
Scroll to the bottom of the page at that link and flash the USB controller firmware.
Thanks, Renesas update seems to have taken. Let's hope it's more stable.
I have a Core i5-2500k Sandybridge processor. Is there a point to me updating the BIOS & Management Engine to the latest? The support page for my MB says don't bother unless I have an Ivybridge processor?
Quote from: XFM on 13-June-13, 05:56:07
What PC is the card reader from? Some of those card readers such as from Sony & Dell will only work in the respective brand PCs they came from and not any other. I have one I removed from a Sony and it will not work in my rig. If the card reader is a normal 3rd party model purchased from a store it should work but may require drivers from the manufacturer of it. As far as plugging in a card reader they go to an internal USB header on the MB.
The old desktop was from computer maker Cisnet.
I plugged the 5-hole (or rather 4 holes, since one is blank) plug into JUSB1, but it seems to keep connecting and disconnecting in Windows 7 x64. Windows made drives for all 4 card slots, but whenever I put a memory card in, it would just connect and disconnect and the memory card would never show up. Is it a driver problem?
It's a Foxconn internal card reader, except I can't seem to figure out which model it is despite googling (not indicated anywhere on the card reader).
Don't really want to cough up $15-$20 for a new card reader, so I'm hoping to get this one to work. Thanks.

MSI 651 Combo / MS6769 Problem with Temperature

Similar Messages

Maybe you are looking for