MSI-6580 (845PE MAX 2.0) Numlock

Problem is Numlock , in BIOS Numlock is OFF but Numlock LED on keyboard is ON.

Quote
Originally posted by PicAsso
Problem is Numlock , in BIOS Numlock is OFF but Numlock LED on keyboard is ON.
OK! I update BIOS 3.40 to 3.50 is OK! Numlock LED is OFF

Similar Messages

  • MS-6580 (845PE Max VER 2.0) not POSTING with 2GB of DRAM -- POST with only 1GB

    Ok I am currently fixing a client's PC, he wanted a RAM upgrade from 1GB to 2GB. I purchased a Komputerbay 2GB (2 X 1GB) DDR DIMM (184 PIN) 333Mhz DDR333 PC2700 kit, it was the cheapest I could find. The problem is, the system will not POST with the two 2GB modules installed, only with 1GB on either DIMM slot. I've tested them both RAM modules, and they work. Before, the PC had 2x 512MB DRAM installed, and it was working, so I don't think there is anything wrong with the DIMM slots.
    When I start the system, I get two paused beeps, and some weird noise, not sure what is.
    I've read the motherboard manual, and it says the maximum support is 2GB DDR 333mhz.
    Any help would be appreciated, thanks!
    PC Specs:
    [ALL SETTINGS ARE STOCK -- NOT OVERCLOCKED]
    CPU: Intel Pentium 4
    MOTHERBOARD: MS-6580 (845PE Max) ver.2
    PSU: Q-Max 350W ATX
    GPU: nVidia e-Geforce2 NV11-A1 MX400 64MB

    Quote from: Mike on 22-October-11, 03:36:53
    Does it post with only one 2GB dimm installed?
    I don't believe the board/chipset will support 4GB(2x2GB).
    http://eu.msi.com/product/mb/845PE-Max2.html#/?div=Detail
    I don't know where you're getting 4GB, I never said anything about 4GB - I must have made a type but what I mean was: The motherboard wouldn't post with two 1GB modules (2GB) as specified to be the maximum according to the manual. It would only post with 1GB(1x1GB or 2x512MB) or 1.5GB(1x1GB + 1x512MB) of RAM.
    No worries, the problem is resolved now.

  • Using scsi board with MS-6580 / 845PE Max

    I'm trying to get an adaptec 2940U2W scsi board to install in my comp.
    The comp hangs on the dialogue:
     "Initialising Intel(R) Boot agent version 4.0.22 PXE 2.1 build 083 (wfm 2.0)
    If I try and use Ctrl S it takes me to a very corrupted AMI set up page where nothing is visible
    Any suggestions?

    Initialising Intel(R) Boot agent version 4.0.22 PXE 2.1 build 083 (wfm 2.0)
    Looks like you've got your PC triggered to boot from the LAN. What you need to do is to go into your BIOS, change your boot sequence accordingly so that you can avoid/reach to boot from your Adapter SCSI drive AND your LAN, depends on what you need. Remove them from the boot sequence and disable any related boot device configs in the BIOS.

  • MSI 845PE Max Lan - MS-6580 Ver.2.0 boot failure

    I recently purchased this mainboard and components. All's working fine except for 1 strange issue:
    On each 1st boot-up (after I powered down) the harddisk (UDMA 100, 80GB Western Digital) is not detected. This results in a boot failure.
    After this 1st failure I reset and from then on booting is OK, harrdisk is succesfully detected (although it always takes about 10-15 seconds before detecting).
    Anyone else experiencing the same problems?
    This is my config:
    - MSI 845PE Max Lan
    - 2,4GHz P4
    - Western Digital 80GB 7200rpm (set as master, only device on its cable)
    - ATI Radeon 9700
    - 512 MB DDR (pc2700)
    Hope anyone can help out.

    Note: FSB533 CPU is required in order to choose DDR333 selection in the BIOS setup
    thats what is says here
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=364&MODEL=MS-6580

  • 845pe max (6580) new bios version 3.7 out...

    today 845pe max(6580) got new version 3.7 bios out again...so fast, just updated 3.6 last month me just updated, so far temperature change for 57c to 48c when idle after updated new bios :D  but still quite high X(

    X(...think can confirm bios ver 3.8 got problem.
    its no more in msi website, think msi took its out.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=364
     :O never test the bios properly and just release...

  • Does MSI 845PE Max supports LBA

    In fact all is in the title... Does MSI 845PE MAX (6580) supports for LBA drive?

    Yes, as you need to have the patch incorporated in order to recognize the total drive to start with. There is some info here: http://support.microsoft.com/default.aspx?scid=kb;en-us;305098

  • 845PE Max (6580 v.2.0) and Maxtor DiamondMax 9 Plus - Problem!

    Hi!
    My mobo (845PE Max - MS 6580 v.2.0) detecting my hard disk (Maxtor DiamondMax 9 Plus 80GB ATA133 7200rpm) as the drive working in UltraDMA/2 mode (ATA33). What is wrong? How can I set it to work in mode UltraDMA/5 (ATA100)???
    Please, help me as quick as possible.
    Best regards
    Martin "Kenickie"

    System: MS Windows XP Pro. No Service Pack 1 installed yet.
    But it doesn't matter.
    Disk is recognized as UDMA/2 by BIOS!!! I upgraded BIOS to newest (3.40) but it didn't help.
    This Maxtor is connected as Primary Master, and there is a CD-Recorder (TEAC CD-W516EB) on the same cable as Primary Slave. Teac is also recognized as UDMA/2. At the secondary Controller I have CD-ROM Drive (TEAC x32).

  • 845PE MAX V2.0 MS-6580

    I HAVE 3 SAME MB WITH SAME SETTING AND SAME CARD, LOAD WITH WIN 2000, ALL HAVE THE SAME PROBLEM. TIME TO TIME IT WILL SHUT DOWN BY IT SELF AND REBOOT AGAING. AND I CAN'T FIND THE PROBLEM, UPDATE MOST THE DRIVER BIOS TO 3.50, INTEL INF, AND EVEN RELOAD THE WIN 2000, STILL HAVE THE PROBLEM, CALL UP THE TECH SUPPORT THEY CAN'T FIND OUT THE PROBLEM IS (DISABLED ALL THE WAKE UP EVEN, SET DRAM FREQ. TO 266MHZ, DISABLED DRAM TIMING BY SPD, CAS# LATENCY 2.5)..... HOPE ANYONE WILL HAVE THE SOLUTION FOR IT. THANK YOU.
    CPU: CELERON 1.7GIG
    MB:  845PE MAX V2.0
    BIOS: 3.50
    HD:  MAXTOR 20GB
    RAM: 512MB PC2100 1PC HOUSE BRAND
    AGP: ATI RADEON 7000 32MB
    NIC: LINKSYS LNE100TX ETHERFAST PCI

    ACIDBURN88888888,
    What is your PSU, how much output for +5V?
    Go to this link, it'll give you lots of help you need. http://www.msi.com.tw/program/e_service/forum/index.php?threadid=1135&boardid=16&styleid=1
    All the Best... :D!!!

  • MSI 845PE MAX

    i'm using the mainboard MSI 845PE MAX
    does anyone else uses this board?
    i just wanna know if this board can support AGP 8x graphic cards
    can anyone tell me? 

    hello, nope its support maximum AGP 4x. but good news is that you can use any AGP 8x VGA on it without almost any limitation. differents is quite little. only few visual increament. nothink performance related.

  • MSI 845PE Max Motherboard TV CARD problems

    hello,
    i'm use to MSI 845PE Max motherboard and avermedia tv card. i'm plug in to avermedia anywhere pci slot in motherboard but not installed avermedia. error is "ACPI bios system motherboard extension" How i can install to avermedia tv card.. HELP ME..!
    PoWeRGuArD

    i'm plug in to avermedia anywhere pci slot in motherboard
    dont understand this bit,try different pci slots

  • MSI 845PE MAX-L mobo no power whatsoever

    Hi,
    Just upgraded my mobo, RAM & processor to the following:
    MSI 845PE MAX-L mainboard
    Intel Pentium 4 2.4 GHz
    DDR-DIMM PC2700 512MB
    Put everything together and worked a treat from Monday. Reinstalled all my software including XP and had everting running smoothly for over 24 hours with the tower boxed up (so no possibility of accidentally touching any componentry).
    This morning I tried to switch on the machine and NOTHING. No response from the mobo no fans no lights no beep - nothing.
    Checked all leads in place.
    Then tried power supply (Eagle ATX 350W Switching Power Supply Pentium 4 compatible) on my old ABIT mobo together with my old 256 Mb SRAM & Hercules 3D Prophet 32MB graphics card. It worked!
    So put same setup back on the new MSI mobo, i.e. just graphics card, 512Mb DRAM, power supply & Intel 2.4 processor. Still nothing. Pretty sure got all my leads from the tower in all the right places on Mobo as they matched the previous configuration and that wouldn't have worked before, right?
    Whats going on, why does my pc work one day and then can't be arsed the next?
    Lloydich

    I had an Eagle 350watt PSU come supplied in my new case but i didnt trust the PSU so i took it out without even trying it.
    What is your complete system build setup?
    Those el-cheapo PSU's are not really upto running the most intense of systems despite what the manufacturers say.
    Unplug a few components from off the PSU and try to boot up again... its not impossible the PSU is dead... honestly if you spend alot of money on a new system it seems criminal not to get a decent PSU, im not criticisng here im just surprised how many people dont consider getting a 'good' PSU to power their new state of the art PC's.
    Try the unplugging of a few components that connect to the PSU if this dont work for you then if possible try a better PSU (350 watt does not neccesarily mean its good, some cheap 350 watt PSU's are less powerful than a good 300 watt PSU)

  • MSI 845PE Max-L

    Is there a compability problem between Radeon 9200 Atlantis,P4 2.66 Gig prosessor and MSI 845PE Max-L ??
    Memory module is DDR 400 512 Ram,HD is Maxtor 120 Gig ATA 100
    Every single component works fine with my other Motherboard ( MSI 845E Max )
    but when I try to start these in 845PE Max-L only thing that happens is prosessor cooler spins 2 seconds...then totally silence....I got a motherboard replaced once
    already....
    I cleared CMOS
    tried another graphic card ( Geforce3 Ti 500 )
    Nothing happens even with default settings...
    Highly unlikely that two broken motherboards has been given to me !?!?!?!
    Please someone tell me what to do..
    E-Mail,MSN or here at the Boards...
    - THX -

    "Lower you DRAM Freq to 333MHz and increase you DDR Voltage to 2.7v, thereafter incrasing your AGP Voltge to 1.6v."
    Why ? and how ?
    cannot go to BIOS..
    and I just asked if there is a compability problem...
    Danny : no other cooler movement :(
    just prosessorcooler spins few times,
    there are no shorts between board and case through the standoffs.
    I took motherboard out of case ( in case of that )
    Whole F****n thing is starting to me off...
    Never had this much problems with MSI-boards :(
    So,once again ; every component works in 845E max ,same case,same powersupply etc.
    Only sure thing seems to be : 2 broken motherboards ! ( god damn )

  • 845PE MAX and MSI TI 4800SE Problem! Please Help!

    I'm tring to upgrade to a TI 4800SE on the MSI 845PE MAX Motherboard. But windows XP won't boot. I can't get in the BIOS setup. Just the MSI logo at startup, and it retarts every 8 seconds. Please help! Tried uninstalled ATI driver first.
    System:
    P4 2.4Ghz
    MSI 846PE MAX
    ATI All-IN-Radeon
    Windows XP

    Is that video card 4x or 8x AGP.  Not sure but I think that mobo only supports 4x agp.

  • 845PE Max Problems :(

    Hi,
    I just installed the new 845PE Max 6580 motherboard.
    My system specs are
    3.06 ghz Pentium 4
    512 MB PC2100 DDR SDRAM
    Radeon 9700 pro with latest 3.1 catalyst drivers
    SoundBlaster Live 5.1
    DirectX 9.0
    Windows XP
    The problem is that the system randomly hangs without any bsod or any error. I cant hit the reset switch or power it off from the front. Only way to turn off the system is by switching off the button on the power supply at the back.
    Any kind directx application (game or benchmark) hangs, be it 8 or 9. I thought it was as a result of directx 9.0 but it hung on 8.0 as well.
    Random hangs also occur while playing any audio. Another thing is when i power up after the system after it crashed my logitech cordless mouse stops responding unless i swap the usb slot at the back.
    I've updated the bios as well as the usb 2.0 drivers off the website but still no luck.

    got the latest intel inf from MSI website. turned off hyperthreading as well in the BIOS.
    the power supply came with the case i bought a week back. brand new... http://shop.store.yahoo.com/svcompucycle/silverchenming.html
    still getting these random freezes. freezes on me while listening to music on winamp, running IE, watching any movie on windows media player and games based on the unreal and like engines. somehow games like nba, fifa work fine.
    also i made sure the radeon power supply not being shared by any device. the PCI slot below the radeon is empty as well.
    i bought the motherboard from newegg.com and the worst part is apparently i cant RMA it back!
    its driving me nuts. please there's gotta be a way to fix this. i'm sure some people are running the MSI 845PE with the radeon 9700 pro without any problems.
    god..its going to drive me nuts if i'm going to shell out $120+ more to buy a new motherboard if it comes down to this.

  • 845PE Max won't detect X800 AIW

    I'm having an issue with my old 845PE Max mobo. I've had the Radeon X800 All-In-Wonder work before on this mobo, but after a recent format the card just won't budge! The mobo detected the card as a plug & play gfx card and everything went smooth, but after the recent format things didn't go as smooth.
    When I boot the computer with the Rad now, XP doesn't detect it as a plug & play card and the annoying vgasave is initiated. I've read and tried several fixes. Installed the newest INF update with the MSI Update Tool (which didn't do the trick), tried the INF update from Intel and finally booting XP by hitting F8 and running VGA Mode, none of which worked.
    What I don't get is why the card worked fine before the format, but not after?!
    Probably time for me to get out from under my rock and get a new rig, but I'm not willing to give up on this one quite yet. Any ideas would be greatly appreciated.
    Regards,
    Fischer
    PS: Before you ask, I've got SP2, Framework 2.0 and the whole nine yards in XP updates.

    Thanks for the input. I'll try, but if it doesn't work I'll just plug in a dated Nvidia card and pass the rig on. I'm crawling out under the rock and getting a new mobo+chip+ram+pci express gfx, and design a new rig. :D
    To reflect on this mobo: I've had this mobo since it came out, quite a few years ago, together with some cheap 512 sticks and a Intel P4 2.4 Ghz which I've been able to squeeze 3.1 Ghz out of with a later dual rad watercooling solution, and it's been running like this for years without a glitch. So, I think it's safe to say that I got more then my moneys worth. Salute!
    Thanks for the help, both of you.
    Regards,
    Fischer

Maybe you are looking for