MSI 6600 GPU and Neo 4 ultra problem ----- PLEASE HELP -----

I just got done building a beautiful system with the K8N Neo 4 platinum matched with a MSI 6600 PCIE video card. Everything went together perfectly. After many reboots and getting everything set up the way I want, I accidently moved the monitor, and the DVI cable was loose. I did this during a reboot.
Now the system will not boot up at all past the post screen. I can not get into BOIS at all. I tried unplugging, clearing CMOS, and reseating the video card. However, I am really out of options for what I can do.
Does anyone ave any suggestions, or perhaps has seenthis before?
Thanks,
Doug Heerema

Opps nevermind what I said. I misread your second paragraph. As you can't get past the post screen I have to ask if the HDD's are running like it would in a normal boot? If so then you may be set to some other scan frequency than the Monitor can handle. If so then you need to try it as Eddie suggested with a normal CRT so that you can reset to the panels native resoluition and frequency. Some Flat Panel displays don't like anything else. If that works then try to remember the last operation you did before this happened. As whatever that was likely changed the operating frequencies to somethiong the monitor did not liuke. You will need to review that before trying it again.

Similar Messages

Problem: codebase, jar and image reloading problem please help!

Hi Java Gurus,
I have written an applet that extends JApplet for viewing webcam. In order to reduce the download time I put my classes into a doorcam.jar file. The following is my <applet> tag in my html file.
<applet code="CameraApplet.class"
archive="doorcam.jar"
codebase = "webcam/classes"
width="375" height="475">
<param name="imagePath" value="http://judge/webcam/images">
<param name="webCamImage" value="door.jpg">
<param name="COMPort" value="COM2">
<param name="frameRate" value="10"> 
<param name="host" value="judge">
</applet>
The fist problem is that my class file does not get loaded from the jar file if i provide the "codebase" attribute as above. Instead the browser load every single class file from the webserver. This has some problem too. Coz the browser sometimes just thorough NullPointerException or ClassNotFoundException. After much of debugging I found out that the problem is the IE browser which seldom fails to load classes or image file from the server. If i referesh the browser the applet and all its classes loaded successfully and runs smoothly. This behaviour never occurs when running with "appletviewer".
I wanted all my classes to be loaded from my jar file. After much of trial and error I found out that if i remove "codebase" attribute the browser loads the classes from my jar file and applet loads very fast. This is where the second problem comes in. The browser does not reload my webcam image file so that the webcam become alive with live images, like before.
If I run on "appletviewer" everything works fine my web cam is displayed properly. But in IE browser the image does not get reloaded when I refresh my image to give live to my webcam display. The refresh method is given below.
private void refresh(final URL url) {
Image webCamImage =getImage(url);
webCamImage.flush(); // flush out the previous image
webCamImage = getImage(url); // get a new image
webCamImageIcon.setImage(webCamImage); webCamImageIcon.paintIcon(webCamLabel, webCamLabel.getGraphics(), 15, 15);
When I add the "codebase" attribute back, the image gets reloaded for every refresh() and everything works fine. But the classes are also loaded from the server. And occasionally also suffers Class loading and image loading problem. As I presented earlier, when I do refreshing in the browser everything gets loaded and the applet function correctly with web cam displaying very well.
The problem is so strange that I could not find any way to solve it.
It would be a great help to me if somebody provide me some work around to the problem.
I tested on Windows 2000, Windows XP, IE 5.5, IE 6 with J2SDK 1.4.0.
Thank you all very much in advance.
best regards,
Judge

Thank you so much for the suggestions. I did tried the way u suggested. The problem still the same.
I think its the problem between IE browser and Java Plug-in.
I which SUN would find these incompatibilities and solve these problems.
I even tried using java SDK and plug-in 1.4.1 it even worst. It can't even load an applet. And it does not show any loading messages nor any error messages. It just show a cross sign on the upper left coner.
I would be so glad, if Sun would try to eliminate the inconsistancies such as caching, loading, initializing etc between browser and its Java plug-In. For example, applets behave well in appletviewer and behave unpredictably in browser environment.
I have seen so many people in the forums with all sorts of problems because of this.
Right now I m desperately looking for work around to my problem.
If somebody would provide me with the solution to my problem it would be a great help to me.
thank you all so much.
best regards,
Judge

MSI K8N Neo 4f problems please help.

My rig
Processor
AMD Althon64 3000+ Venice
Mainboard
MSI Neo4f
Graphics Card
Leadtek GF6600GT Extreme 128mb
Memory
2x512 Twinmos ddr400
Display
Viewsonic VX912
Storage
Hitachi 250GB SATA
Optical Storage
MSI DVDRom/ LG 4163B DVDRW
Casing
Cheapo
PSU
Verudium Vortex 430w
Audio
On Board
OS
Win XP SP1
The above rig bought 3 weeks ago,
and its been giving me unstability problems. After installing winxp SP1, when I start installing drivers, these problems would come.
1. PC would freeze up now and then.
2. USB keyboard and mouse sometimes wouldn't work after bootup although PC is still running
3. Blue screen! now and then.
4. Sometimes different software installation would give error but re-running the installation would be fine.
The above mentioned problems could is still persisting after 2 weeks. I've reformat and reinstalled winxp 4-5 times and the above would still occurs sometimes, even in the middle of installing drivers. It comes randomly and not during a specific software/driver installation.
I've run memtest and RTHBRIBL overnight with no errors and I'm suspecting motherboard. Strange thing is that the MSI live update program help me flash bios on my motherboard and would still prompt me I need to flash my bios everytime.
I've basically almost isolate everything except motherboard. I hope someone can help me determine if it is my motherboard problems. I've going crazy already.

Quote from: Tango on 14-August-05, 21:16:35
Do you have Cool n Quiet enabled?
If so disable it , and report back.
Verudium Vortex 430w
Please post the voltage rail ratings.
Have you tried Prime95?
http://www.mersenne.org/freesoft.htm
It is a stress test that runs under windows and also can be used to test your memory.
EDIT: http://www.alevtav.com/products.php?brand=1&ATSid=4a2fe5368de8eb29c5723c93b90aec9f
If that is your PSU it is fine.
What nforce drivers are you using?
yes thats the vortex i have
cool and quiet disable thru bios
nforce drivers. seems to have more problems with the newer downloaded from MSI website. but can't really confirm
I've download prime 95 but I did not run it because by running RTHBTIBL will cause my cpu temp to go to 47 deg c. But I'll try it tonight.
note that I'm not running raid. just a 250gb SATA hitachi HD.

Neo 965 problems--- please help

Hi
i have a neo 965 mb and it has worked fine for about a month, now when i this morning boot the computer, first it takes very long time to boot 3 or 4 min.
it stays and try to detect ide drives for a very long time. when it finaly boots it cant find my other sata drives and it says that there is no network connection. Any suggestion or shall i rma the board?
The system is
Mb MSI neo 965-f
PSU antec 550 wat
2 gb crossair ram
1 160 gb sata disk (main)
1 200gb maxtor sata disk
1 250gb seagat sata disk
1 120 gb ide disk
1 samsund dvdrw
1 e6600 dualcore " 2.4
1 msi 7900gto gfx xRD
BIOS VER 1.5
which should be the newest bios
any ideas how to solve the problems

I have solved the problem, i have moved the sata connectors to connectors 2-5, then it found all disks and dvd drive. i haven't connected my ide hard drive. It took a reinstall of window, but it works perfect now again.
Peder

G585 wired and wifi networking problems - please help!!

Just purchased a new G585 a couple weeks ago. After trying Win 8, I realized what a complete POS of an OS it is and installed Win 7.
2 Major problems:
1. Ethernet connection erratically disconnects - no rhyme or reason - sometimes works other times doesn't. I've tested on two diff networks - the same behavior.
2. Cannot install wifi - tried the drivers from Lenovo site - no go - tried drivers someone had recommended (broadcom wifi5.100.196.18) these did not work either - device still unrecognized in device manager
This is my 9th Lenovo laptop over the years. The others were great. This one seems to have serious issues.
Can anyone assist please???

I have had these same connectivity issue since I bought the laptop in March of 2013. It is January 2014, and is will still drop connectivity for no apparent reason, be incredibly slow when it IS connected, and sometimes just sop seeing the network altogether (and this happens on every netwrok I have attempted to connect to).
The most obnoxious thing is that after spending several hours over multiple days on the phone with tech supprt, they said I needed to send it in for repair. So I did. It was gone two weeks and when I got ti back, they claimed that had repaired it, but everything was exactly the same.
Combine that with the lack of help for the company and the fact that this seems to be the only laptop where edge swipes on the touchpad cannot be disabled, this Lenovo laptop is the worst computer I have ever owned, period. And I mean ever.
If there ACTUALLY IS a way to fix this issue, I would love to hear it, bit nothing that anywone ever suggest actually works. I thought maybe if I upgraded to Windows 8.1 it would help, but the Lenovo site lists the G585 as a model you shouldn't update because of monitor driver issues witht he upgrade. It really looks to me like Lenovo has written this model off completely.
I will never buy another Lenovo product and I will direct other people to other brands. Words cannot describe my frustration and disappointment.

MSI GE70 2OE-029CZ Start-up problems, please help

Hello guys. My name is Mike and I need some help from you. Half year back I bought notebook MSI GE70 2OE-029CZ from Czech Republic and it wont boot up now. I used this notebook normally without problems until now. Four days back I finished my work and turned notebook off. Next day, after I came back home, I turned notebook on and suddenly it turned off after 4 seconds. It showed only MSI logo, I did not get in to bootloader. Then I turned it on again and same thing happened again. Except it was running only 1-2 seconds. After this notebook did not start up again. I have checked power supply with voltmeter and got suitable voltage. I did let the battery to discharge little over night and in the morning I tried to put it on charger. The battery diode lighted up. But still could not start it up. I already filled out MSI Service webform yesterday, but still did not get any response. Im just posting it here if someone of you has some idea i could try. Also does anyone got any idea why are mine audio jacks not golden? They are just black. I supposed they had to be golden plated. Sorry for my bad grammar, I am not born English speaker . Thank you for you help and time.

Hello,
I am sorry you experience this problem and probably I would be frustrated if such a thing would happen to me.
Sorry if I dis-read something, but have you tried turning the laptop ON without the battery just with charger? And other way around (with FULL battery but no charger)?
About HDD: you can take it out, but would be BEST if you make backup somewhere once you take it out and send it TOGETHER with the laptop, as the problem might be somewhere with the wires.

Ipod Nano 3G and Bose Sounddock Problems - Please help if you can?

Hi all,
Hope you can help me out, I have just purchased a Nano 3G and its all fine when working with head phones.
Tried it in my Bose Sounddock and it has several issues:
1) will not charge at all
2) will not let me change songs when docked
3) when removed it locks for up to 20 secs
4) bose remote will only let me alter volume not songs or rewind
5) if I press off on Bose remote it goes off for 5 secs then comes back on
Please can anyone help explain or offer solutions to this please.
many thanks
Chris mills

Hi megan,
I am swapping my Ipod this weekend. it's a fault with them and I don't think anyone has the answer to solve it.
hope you can do the same.
cheers
chris

Firewire and audio interface problem, please help

Hi all
I'm not being lazy, i've spent hours trawling through forums and google trying to find a fix but cant so hope someone here can help.
Basically, I've been using my Macbook for Logic Studio with an audio interface (Motu 8pre). This was connected via firewire 400 to firewire 400 and worked absolutely fine no problems.
I've recently got a Mac Pro. I've installed Logic onto it, my Motu 8pre driver etc etc and noticed that the firewire socket on the Mac Pro is different. I've been on the Motu website and quite clearly they say that a firewire 400 to firewire 800 cable will work fine with modern macs (this can be seen in more detail at bottom right of this web page http://www.motu.com/products/motuaudio/8pre
I've bought one of these cables and plugged them into my interface and Mac Pro respectively, switched on the device as i have been doing for the past year with my Macbook, but the MacPro just wont seem to recognise it.
How can I get this interface to work with my Mac Pro?
I've tried connecting to different ports on back and front, restarting machine but it just wont work.
Am I missing something simple here?
Can anyone help?
Thanks in advance
Adam

Ok its official I AM a muppet.
Went onto motu site again and noticed they released an update driver for snow leopard. Downloaded it and it works fine.
Fixed.
Thanks

Problem with Spotlight and some system problem, Please HELP!

I'm using iMac G5 with iSight (10.4.8)
Recently, I've noticed that my spotlight didn't search anything, when I type something it just do nothing.
I try to re indexing the spotlight by move the HD to the privacy zone in the spotlight preference but nothing appear on the list. I can't add anything to the privacy zone both by draging the folder or click + button.
Then I search for the application that can clear the cache and re indexing the spotlight, I found Onyx and Maintenance.
Both of them can't be open, it say that I have to use an admin account.
Even I was logged in as a Admin, I have only one account in the system and set as an admin already.
So, I search on the internet and someone suggest another way to re index in terminal by using this command: sudo mdutil -E /
First I open the terminal and type the command, it said "-bash: sudo: command not found "
So, I try to use terminal by boot on the DVD that bundle with iMac, and same result.
I tried boot in single user by press command and S when boot and type sudo command, same reult.
Another information, I noticed on my macbook when I open the terminal, it will show this info:
Last login: show the time
Welcom to Darwin!
My computer name
But on my iMac, it didn't show anything except only the computer name line.
What should I do? Thanks

Highly recommend that you read, reread and understand the consequences and then follow the directions as presented on X Lab
http://www.thexlab.com/faqs/stopspotlightindex.html
That is before you follow some of the directions you find on some of these discussions. Even mine.

Clone Stamp and Healing brush problem, please help!

Hi there, I'm new to the forum but I have been using Adobe creative suite for quite some time now. As the thread title describes, I'm having an issue with my photoshop clone stamp and healing brush tool that I can't seem to fix on my own. I searched the internet all day, scrolling over many other posts but I can't seem to find anyone else who is having similar issues like I am having here.
This is kinda hard to explain but the issue I am having, is that when I go to use either my clone stamp or healing brush tool, the layer I am working on whether it is a flattened background or normal editable layer, get shifted as soon as I press the option key to make a selection and then when I go to move to the area to use these tools it acts like I've duplicated the entire layer and drags it around the screen, even though no such copy and paste has been made. All of my other tools are working normally and I wasn't having this issue last time I worked on anything in photoshop.
I am running:
a Mac OSX 10.5.8
CS4 extended version 11.0.2
Any and all help is greatly appreciated.

Your probably seeing the clone source overlay.
Go to Window>Clone Source and either uncheck:
Show Overlay for no overlay or check clipped to show the overlay
clipped to the size of the brush.
There is also a photoshop macintosh forum for future reference
(you posted in the photoshop elements forum)
http://forums.adobe.com/community/photoshop/photoshop_macintosh
MTSTUNER

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

MSI 6600 GPU and Neo 4 ultra problem ----- PLEASE HELP -----

Similar Messages

Maybe you are looking for