MSI-6967 - Bluetooth dongle problem with a phone!
The Error is "The Bluetooth Serial Port connection failed: The remote device closed the connection". and When I try to connect to my phone with Mobilet. It becomes instantly "disconnected". I have a N-gage. I tried also to use mroute, In Spite It gives the error about connection, It shows that it connected. But Mroute does not show the phone properties and Nokia Suite does not start....
I tried two N-gages to be able to do that. But it gives the same error...
What can I do about this problem..?
version 1.3.1 (software)
bumpin
Similar Messages
-
MSI 6967 bluetooth headset problem
I have recently bought a MSI 6967 as it supports the headset profile. MSI was installed with the 1.4.2.10 drivers. When i tried pairing my Jabra bt200 headset i was able to record normally on sound recorder however, i wan't able to use MSN yahoo etc... as the microphone would not pick up any sound.
Is there anybody out there that would be kind enough to help me sort out this problem. I have winxp sp1
thanksbumpin
-
Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth
Hello NiiTeye,
I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
iOS: Troubleshooting Bluetooth connections - Apple Support
Sincerely,
- Brenden -
I have a problem with my phone n73
i have a problem with my phone n73
my memory work good and i can see it from gallery but when i want to save some thing it save directelly in memory dont give me choise and when i want to sign ring tone for alert or ringtone or massege i dont see any thing i save in memory or phone i see only tones whice come with phone
what can i do plz.you need to go to file manager scroll right to memory card
find the tune you want as ringtone
select options-copy to folder-choose phone memory-choose sounds-choose digital-choose tones-save it here-
it will now apper in the tones selection
you can directly save txts and mms to memory card via message settings
i think if you do this bluetooth files recieved will be saved to memory card as well
pics can be saved to memory card via camera settings and the same for video clips
to save music use pc suite or even better a card reader
hope that helps mate -
Problems with IP Phones registration to CUCME on SG200-50P
Problems with IP Phones registration to CUCME on SG200-50P
System setup:
- Router Cisco 2811 with IOS 12.4(24)T5 Advanced IP Services, CUCME 7.1, DHCP Server
with HWIC-4ESW
- Switches:
- old - SLM224P
- new - SG200-50P (SLM2048PT), OS v1.3.2.02
- IP Phones 7911 and 7931, OS v8.4.2
One VLAN (for desktops and IP Phones) and one IP subnet, no voice VLAN.
Network diagram:
C2811---HWIC-4ESW---SWITCH---IPPhones
Problem description:
1. In the old setup with SLM224P everything works fine.
Connected phones almost immediately (1-2 sec. after power up) get ip address, configuration and registers to CUCME.
2. When switch is changed to new SG200-50G:
- ip phones get their ip address and tftp configuration very slowly - about 10-20 seconds
- ip phones cant register to CUCME at all. On the router with SCCP debugging turned on there is no sing of registration attempt
- after reconnecting the old SLM224P situation backs to normal
Things that have been checked or tried without success:
- ports speed and duplex auto, correct detection - although not tested with manual settings
- CDP/LLDP on/off
- smartport mode auto and most static settings, also with disabled smartport
- power cycle / reset
- spanning tree and port security settings
- solutions from that post - https://supportforums.cisco.com/thread/2232161
None of the above methods worked.
The only action that allowed ip phones to register was changing smartport role to static IPPhone + Desktop.
After that when phone was disconnected and then reconnected the problem exists again - no registration (IP Phone status DECEASED in CUCME). Same with power cycle/reset.
Please advice.
Thanks in advance.1 - You have created the voice vlan?
Nope, flat network, one ip subnet (10 hosts and 10 phones)
2 - Have you set a phone on an untagged access port for the voice vlan to see if it works?
Yep, phones are connected to untagged access ports of the one and only vlan
3 - Have you tried to set the auto voice vlan on the switch so it dynamically assigns the role for ip phone + desktop?
Not sure about auto voice vlan setting, although there was no triggers to AVV - no static voice vlan, no CDP/VSDP advertisements of voice vlan.
We've tested static and auto smartport roles (independently of auto voice vlan feature) with successful auto-detection.
The switch was pretty much in default out-of-the-box config (beside management parameters).
4 - When rebooting the switch, you did ensure to save the start up to running config?
Yes, running to startup
5 - Have you manually set spanning tree PORT FAST for the phone ports?
No, we haven't tested that. But portfast should be set automatically for the desktop and ip phone smartport roles. -
My iphone 4 was crushed on the road. Bought a 4 replacement tried to restore it in itunes to get my contact info and it said there was a problem with my phone and I should contact apple store. What does that mean please?
Is the replacement exactly the same as the original ie same memory size & same version? If so it may require updating the OS software before trying to restore your stuff from the backup.
-
Hi every time I go to write a tx my phone asked for my sign in details like I have just bought something like an app of song ect I just press cancel and it goes away but still pretty annoying is there a way to stop this or is there a problem with the phone ? Thanks
If the login box keeps popping up either your acct is disabled or you are mistyping your pw.
Go here and try out your pw and reset if necessary:
http://appleid.apple.com/
Click on Manage ID and go from there. -
Why apple stoped iphone 5? What's the reason?? Is there any problem with that phone... Because iphone 4s is still in market.. But they stopped iphone 5.. What's wrong with iphone 5????
It was replaced by the iPhone 5C, which is essentially the same phone except for the case, better LTE converage and a larger battery.
-
I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.
I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick -
Has anyone else had any problems with their phone over heating and shutting down?
I've had my phone for less a month and I've already had issues with my iphone 4. On several occassions it has overheated and shut down. On one occasion I put the phone in the side pocket of my purse where, I also had a charger for my camera. When I removed the phone, it was hot...not warm but hot! On another occasion I was at the movies and put the phone face down on my lap, at one point i touched the phone and again it was hot. When the movie was over, and I looked at the phone it had shut down....this has happened a few times more since then. I've also had problems with the phone shutting down on it's own. I took it to my local apple store and the representative looked at my phone and ran a diagnostic check for me. He said the everything on my phone looked normal and that my phone probably needs a "breaking in" period...to give it a couple of months...He really didn't tell me much more...I don't use my phone for more than the basics...calling, texting, and some mild app use...I don't understand how I can be having these problems when I've had my phone for less than a month...The rep tried selling my the Apple insurance. He told me that through ATT I only have 30 days, and I would be better off getting this insurance. I feel very dissastisfied with the service I got. I was done with my appointment within 10 mins, I don't think the representative took the time to listen to my concerns.
Thanks for your reply, but I guess whether this was a silly question is a matter of opinion. That is the whole purpose having these forums...so that people can post their questions, silly or not. Maybe you are an Apple expert or have "techy" knowledge, but I don't. So what may be silly or stupid for you, can be completely different for a novice apple consumer like me. If you must know, I did do my research, and I did do the basic trouble shooting.All to no avail. I took my phone to the apple store, had it diagnosed and was told some very inaccurate information. I ended up going back today, and got a second opinion. This person actually took the time to talk to me and to better explain Applecare and my warranty. She also told me that there is no such thing as a "break in" period, and when there is a shutting down issue, even after a "restore" that it was better to get it replaced. Which is what she did. She replaced my phone. Obviously, the first person, by his own admission, was too tired and ready to go home to actually take the time to explain and offer other options...
-
I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?
In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets. -
What bluetooth EARPHONES work with i-phone 3gs
what bluetooth earphones work with i-phone 3gs i've looked at a couple but found not compatible, so any suggestion's would be great
The iPhone is not designed to pair via Bluetooth to any computer (Mac or otherwise) except for personal hotspot and it will only do that if your cellular plan supports it. Following is a link to bluetooth profiles supported: iOS: Supported Bluetooth profiles
If you are trying to pair for Handoff or Continuity, note 2 things: 1- Both devices must have bluetooth turned on and they must be in range of each other, but you do not pair the devices as you would for other bluetooth uses; and 2- Handoff and Continuity do not seem to be working for a large number of people and there is no clear answer that is solving this for them. -
I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding thisWow. Lots of help. Thanks apple
-
I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?
I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps! -
Im trying to update, but all it does is backup my phone, My itunes is updated, BTW, I just went to Apple bar, i had previous problem with prior phone, now im having this update problem with thyis new phone, someone HELP!!
Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.
Maybe you are looking for
-
hi all I have done 103 movement type with 100 quantity... but i want to do GR 105 movement type with 110 Quantity.... System is giving Error M7022 which is maintained as a warning only......... SAP MM
-
Have two cell phones, different numbers. Each has their own apple id. How can I merge them so apps purchased on one phone show on the other. But.as each has their own email address, I want to keep these email addresses separate on their own phone?
-
Hello, I use mail, my version is (uname -a) Darwin Igors-MacBook-Pro.local 11.4.2 Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 x86_64 and I want to define my message font to particular font, f.e. ari
-
How do I save a single pic to my gallery from a text message
I am able to save pics from a text message if there are multi pics; However, if there is only a single pic sent to me, I can't figure out how to save it to my gallery. Please help.
-
DBAdapter polling with logical delete x distrib polling x DB rows per trans
Hi all. I'm trying to configure a DBAdapter with "logical delete" polling strategy, distributed polling (cluster environment) and a defined number of "Database Rows per Transaction". When I check the box "Distributed Polling", the SQL generated gets