MSI-7125 K8N neo4f ram slots not working

I have had this motherboard for a little over a year and a few days ago I was on the internet got up for a minute came back and the display was black, I reset the computer and it wouldn't come back on so I disconnected the power cable opened the case and started looking around and couldn't see any physical problems with the board so I took the Video card out, then the ram disconnected the hard drives and optical drives I cleared the CMOS by taking out the battery and leaving it disconnected for 20 minutes,after that time I reinstalled all the components and pushed the power button you could hear it botting up the hard drives and optical drives all the fans were running but no display, So I thought to myself check the ram I started trying different ram slots and there it is the only slot that would work with a single stick of ram was slot #2(purple) and the only slots that would work for 2 sticks were both of the purple slots, I had read the manual and this was very strange considering it say's not to install ram into the purple slots while the green ones were not in use, I am not sure why this just started with no warning I have always use the first 2 slots since I purchased this and never had a problem with this motherboard except for my North bridge fan starting to slow down I replaced it before it quit working other than that I haven't done anything else to it. I would extremely appreciate it if someone could help me out with this problem sorry for such a long post.
THOMAS

Well I've been working on computer's professionally(for place I worked) and privately tried supplemented my income for a while, and most of the problems I seen was either memory related or OS related, I know it wasn't my OS been running fine for a month or so after re-format and just figured it had to be ram related and started checking it out and I was correct . Although I never seen this problem before and that it is aggravating( I just received an email from MSI) and it said I was at the end of my 3 year warranty and that it will cost me $45 bux for them to check it out. I just bought this last year dont see how that is possible. I guess I'll try to redo BIOS to 5.2 and see what happens.
THOMAS

Similar Messages

Ram slots not working after CMOS reset

Im using MSI K9N Neo V2 mb, and it was doing fine until i reseted CMOS. Now 3 out of 4 ram slots are not recognized by BIOS nor Windows. Im sure that ram memory is ok, cause ive checked all of it by replacing it between ram slots, and they're only working in slot nr 4.
I know that the MB is old, but everything was working fine, and suddenly went wrong after CMOS reset
Things i did to fix:
Updated BIOS
Msconfig memory uncheck box
Cleared CMOS with jumper
Replaced CMOS BAT
Checked if smth's wrong with cpu
Cleared RAM slots with rubbing alcohol
System wont even boot without memory in DIMM 4 (ram slot 4), and BIOS only recognizes memory in DIMM 4
This is really frustrating, because there is no reason for smth to not work all of a sudden
Any help? Tnx
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

There is a known issue with Powerbooks with the lower memory slot failing, and it sounds like yours may be starting to fail. At one point there was an Apple recall for a small sliver of Powerbook systems to fix that.
The alternatives are to run with 1GB in the upper slot, try one of the internet vendors that say they can fix that (check references), or install a used logic board. I don't believe Apple is repairing Powerbooks anymore, so if you want to buy a used logic board, you'll need to install it yourself, or perhaps an Apple Authorized Service Provider would be willing to do the work.

Gaming 5 ram slots not working

Hi
I gave just upgraded my mobo and cpu to z97 gaming 5 and i5 4690k. The issue I have is when I use ram slots 3 or 4 the system with not boot and the error code 03 will be displayed. Slot 1 and 2 are working its just when I try and use slots 3 and 4.
As per instruction I should be using slots 2 and 4 but cant.
Any Ideas. Current ram is a data 2 x 2gb

Hi I have tried both individually in each slot, as soon as I use 3 or 4 PC doesn't post. The debug error 03 is displayed on the mobo. No I don't have other ram to try. As I say it works I. 1 and 2 .

RAM slot not working

Hey everyone,
I recently bought some RAM for my Mac Book Pro. It came with 1gb, and I bought two 1gb sticks. I put in both sticks of new RAM and my computer would come on but the screen would remain blank. After doing some tests, I found that the lower RAM tray was not working with the old or new RAM stick, and that the upper tray worked with the new and old one. Has this happened to anyone, or anyone have any suggestions on fixes? I tried canned air and it hasn't helped. Currently, I am using the new RAM stick in the upper tray, but would obviously like to take advantage of the lower tray as well.
Thanks!

Sounds like bad news, I'm afraid, Davide. It is likely that the slot itself is damaged. I have seen situations where RAM "reappeared" in the past after an SMC or PRAM reset, but I doubt this is your problem here. Still worth trying, I guess.
Run the Apple Hardware test (on one of the DVDs that originally came with your computer) too, but I suspect it will either need a motherboard repair or replacement.
Rod
(PS - fine surname you have there! )

RAM Slot Not Working for Macbook 2009 - Looking for Alternatives

Tested RAM slots and found that the second slot (slot closest to interior of computer) is not working properly. Switched both 4gb cards in back slot and the computer would not start up, only would beep....definitely not faulty RAM cards because they both work in the first slot.
I've researched this on forums briefly, the consensus seems to be logic board replacement.
I really don't want to invest more money into this older computer - Macbook Pro mid-2009.
Are there any other troubleshooting options here? I don't think it's the OS and do not have any Time Machine data set up before Mac X nor do I have an partitions set up on an external.
The computer is not terribly slow but when using Final Cut Pro X it tends to lag. All of the specs for my computer fall in the recommendations for using with FC10
Could I get an 8gb RAM card for slot 1?
Any advice would be much appreciated.
Thanks!

Does not look like it supports 16 GBs of RAM meaning only 4 GBs/slot.

RAM slots not working (lower)

Hi folks - I had a problem with my PowerBook running very slowly. Helpful friends suggested increasing the RAM. When I set about doing this I found that there were two 256 Mb cards in the machine.
I replaced them both with 1 Gb cards and the Mac was back to a speedy machine. Not long after thanking my friends, I got a 'fatal message' telling me I must restart the machine. When I did this there was no 'sueme' sound and I was back to only 1 Gb of RAM. The lower slot was empty according to the system profiler.
I went to bed dejected!
This morning I removed both 1 Gb cards put back the 256 Mb cards and the machine booted up as usual with 512 Mb of RAM.
So I have put back the 1 Gb cards and have a 2 Gb machine again.
Does anyone know what went wrong? Will it happen again? Do I need to have the machine looked at by a specialist?
Thank you in anticipation
Dunc

There is a known issue with Powerbooks with the lower memory slot failing, and it sounds like yours may be starting to fail. At one point there was an Apple recall for a small sliver of Powerbook systems to fix that.
The alternatives are to run with 1GB in the upper slot, try one of the internet vendors that say they can fix that (check references), or install a used logic board. I don't believe Apple is repairing Powerbooks anymore, so if you want to buy a used logic board, you'll need to install it yourself, or perhaps an Apple Authorized Service Provider would be willing to do the work.

1.25 GHz Lower Ram Slot not working

I've got a 15" G4 1.25GHz. When I went to upgrade my RAM (I use Samsung) I noticed my lower slot is dead. I don't know how long it's been that way. I see others who've posted the same issue, and all mention that Apple knows about it and has documentation on it. Can someone point me to that? I've had this thing 3 years and had to replace the battery twice and the power adapter 3 times. Now this...not too impressive.

Your pB is not covered by:
http://docs.info.apple.com/article.html?artnum=303173
Joe

Need Help...bottom ram slot not working MBP

I have a mid 2009 MBP, i upgraded the ram to 4gb per slot a couple years ago. I did some troubleshooting and found the bottom slot is now inoperable...
3 questions:
1. Any tricks to get that bottom slot working, besides loosening the screws, or using an eraser and then a lead pencil on the connection prongs... which was suggested in ohter threads.
2. Can i use one 8gb ram in the one operable slot?
3. Where can i find a replacement part for this problem?
Any info would be greatly appreciated!

!. No other suggestions to offer. Bring the MBP in for a free evaluation at an Apple store genius bar. If it is a simple repair, they may do it gratis.
2. Yes.
3. Try iFixit.com and Powerbookmedic.com. They have parts, prices and instructions.
Ciao.

HELP!! NO AIRPORT, SOUND, USB, RAM SLOT NOT WORKING

A couple of days ago i opened up up my 06 macbook pro. i opened it up to clean the airvents bc the laptop was getting crazy hot.so I cleaned out all of the dust and when i put everything back together, it wouldnt boot. i got a black screen and the hd light was on (not blinking, solid). so i took out one of the memory sticks and it booted. but now that it booted it says i have "no built in output" "no airport card installed" and one of my usb ports isnt working and i was thinking maybe something wasnt connected to the LB but i went backed and triple checked adn all of the connections seem fine but idk. could it be possible that the logic board might have shorted out while i left it on the chair when i took it apart?? or it just might be a connection that i might have forgotten?? please help me as i dont have money to buy a new laptop. on the bright side the MBP doesnt get hot anymore.
thanks to anyone who helps me
also watching videos on safari was a problem, and i switched to chrome and it fixed it right up, but all of these problems happened at the same time. (not sure if relevant)
p.s i already tried a smc and pram reset

might be a connection that i might have forgotten??
It's possible. However, you already stated that you "triple checked." No harm in checking again incase you blinked too fast the 3 go-arounds.
Check out KB Articles: http://support.apple.com/kb/TS1367 Troubleshooting when your computer won't turn on and http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on
Another option would be to take your MBP to you local Apple Store or an AASP for a FREE diagnostic test. This way you will know exactly what is wrong & how to fix since it appears you know your way around the guts of a MBP.

Satellite U300-151 - SD card slot not working

I have the following model Toshiba Satellite (U300-151 PSU30E-074017AR ) the
SD card slot not working I install windows XP SP 3 ,& the driver is installed 100% , I need to solve this problem ...
plz chk this link:

Hello
I think on your notebook are missing some drivers.
The SM Bus Controller driver is in the chipset driver package. So try to install it and maybe it works.
The drivers you can find on the Toshiba website.
Have you installed it with a Microsoft disk? The Toshiba recovery disk creator contains all necessary drivers and tools that you need and so this would be maybe an option for you to reinstall the OS.
Greets

MY iphone ram is not working what can i do?

HI i am ahmad my iphone 5s ram is not working my iphone is suddenly get down from my hands and get power of plz tell me what can i do

Hey there Ahmad.altaf27,
It sounds like you are unable to turn on your iPhone 5s. I would recommend the troubleshooting from the following article to help you get the issue resolved:
iOS: Not responding or does not turn on
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Regards,
Sterling

MSI K8N Neo 3 Sound Not Working

Hello All
I recently got MSI K8N Neo 3 but the problem is that I don't able to detect the sound card in Windows XP.
The sound card don't detect in Windows XP Service Pack 2 Till November 9 Updates.
My System Specs are
MSI K8N Neo 3
AMD Sempron 2500+ 64-bit
Kingston Value RAM 512MB
Nvidia Vanta 16MB
HardDisk Sata 250GB Western Digital
Power Supply 20 Pins (Not 24 Pins) 300 Watts (Atleast Written)
I don't know the where the problem is . The Audio is enabled in board. I have updated one motherboard bios before checking but the sound was not working so I got new one in replace. I don't upgrade the bios and install Windows XP Today but no sound.
Looking Forward to solve this problem.
Regards
Faisal

Yes, the PCI Sound card is not there. If the sound card is not detected, How I can move the sliders. The Sound icon is only show when the drivers are there and my sound card is not detected. Maybe some hardware conflict or some voltages problem. That I want to confirm. Which thing is creating problem?
Thanks for your Reply...
Further Suggestions Needed

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

HELP!!!!! 915GM Speedster-FA4 PCIe x1 slot not working - SORTED

Hi, I am at my whit’s end with this motherboard, I cannot get the PCIe x1 slot to work. When I use the PCIe x16 slot it recognises the option card OK but the x1 slot will just not see it.
I know the network socket 1 needs to active for the PCIe x1 slot to work.
Any help would be appreciated.
SORTED - IRQ clash with the onboard boot ROM for Lan socket 2 - NOT DOCUMENTED - MSI PLEASE TAKE NOTE

Sorry there is no MSI in here....
It seems that nobody used that config to be able to help.
And no, I'm not from MSI either

Why is one of my ram bank not working on my iMac?

I have an iMac purchased in 2008 equipped with one Hynix 1GB PC2-6400-ddr2-800MHZ ram. I have two ram banks. I wanted to upgrade the ram and purchased 2 Crucial DDR2 PC2-6400 800MHZ ram bars. When I insert one of the Crucial bar in the ram bank occupied by the old ram, it works. But when I insert the second Crucial bar in the second bank, I hear the usual starting chime, but then it doesn't go any further and the screen stays black. I tried and re-tried to insert the bar, but always get the same problem. Any idea what causes the problem?

Try with one crucial module and your original Hynix module. Does it start? Swap Crucial modules and try again. If it starts with one module and not the other you got a bad module from Crucial. If that's the case they have a lifetime warranty and great customer service.
If after trying different combinations in different slots you isolate it to a bad ram slot then you're looking at a bigger problem. Believe it or not ram slots can fail, even if they've never been used. The heat inside an iMac alone could cause solder joints to fail and render a slot useless.

MSI-7125 K8N neo4f ram slots not working

Similar Messages

Maybe you are looking for