MSI 7750 Power Edition OC.. Overheating .. please help.

i bought msi 7750 power edition. it's idle temp remains constant at 39` and while playing games like darksiders, temp reaches 79` even with moderate or low settings. the fan on such temp reaches max speed .. 99% and makes it really noisy. is the temp normal or is there any defect wid my piece ? .. Please Reply

Temp is absolutely normal under load. Anything below 9ß°C is nothing to worry. Try using Afterburner (>>How to use MSI Afterburner<<) and start Kombustor out of it to check tempa under maximum load.

Similar Messages

  • MSI 670 POWER EDITION SLI HELP!

    Okay so i recently bought another MSI 670 Power Edition card. I loved my original and wanted a bit of a performance boost.
    I run a MSI Z68 GD80 G3 mobo with i7 2600K. 16GB of Corsair Vengeance memory.
    So after a few days of testing i get about 10-20fps increase in certain games. Now after comparing my PC to other Computers with similar specs and my cards are faster than theres.
    I am not getting that much of an improvement as i should.
    On unigine Valley "Everything max at 1920x1080" i get a score of 2333 thats with both cards. To me that seems rather low or am i being silly. Also i was watching a video of a guy running the Metro Last Light benchmark and he was hitting over double what i had in terms of FPS.
    Then i read that it could be because i have a sandy bridge and it doesn't utilize PCI.E 3 correctly. Any help would be awesome THANKS :D

    Quote from: rydek on 14-July-14, 02:34:20
    I run a MSI Z68 GD80 G3 mobo with i7 2600K. 16GB of Corsair Vengeance memory.
    Then i read that it could be because i have a sandy bridge and it doesn't utilize PCI.E 3 correctly.
    As flobelix stated before, you are limited to PCI-E 2.0 because of your Sandy CPU.
    Talking about bandwidth, SLI with PCI-E 2.0 x8-x8 is the equivalent of PCI-E 3.0 x4-x4.
    Not very good, but not very bad either.
    Quote from: rydek
    unigine valley sli - 2349
    unigine valley single original card - 1718
    Tomb Raider Tress FX off everything Ultra average FPS 62.7 - SLI
    Tomb Raider Tress FX off everything Ultra average FPS 36.3 - Single GPU original
    Your scores are ok.
    With a better CPU (i7 3770K), the scores are around 2200 (single) and 3000 (SLI).
    Those with higher scores have overclocked GPUs (and CPUs).
    Tomb Raider is one of those few games with great SLI scaling (most of the games are not).
    As you can see, you get a 70-75% boost in this game.

  • PC suddenly restarts while playing games MSI 660Ti Power Edition OC 2GB

    Hi,
    I have the following problem since I replaced my graphics card (before 9800GTX+, now MSI 660Ti Power Edition 2GB) I got 3 random restarts while playing games. The computer is not overheating, the CPU's temperature is around 58-59 degrees after running prime95 for 3 hours. The graphics card temperature is 70 degrees after running furmark for 1 hour, the stress tests never failed, just when running games. The computer has been stable. For case cooling im using (2X12cm front, rear 1X14cm below 1X12cm and above 1X12cm +1 X14cm).
    I got two random system restarts while playing Doom 3 BFG and one system restart after playing Wolfenstein for 4 hours. The PC just restarts itself.
    What could be wrong? I have no more ideas? Should I replace the CPU cooler (im running the stock CPU cooler but all stress tests dont show overheating?!)
    Is it possible that the PSU is the reason, but it should be strong enough ...
    The system:
    GA 870A-UD3
    AMD Phenom II 1090T (cooler box)
    MSI GeForce 660Ti Power Edition OC 2GB
    12GB RAM (12GB Kit 3X4GB DDR3 Kingston Genesis 1600)
    Samsung 256GB 840pro
    WD Blue 500GB
    Thermaltake Thoughpower Q-Fan 750W PSU
    Housing NZXT Source 210 Elite
    OS: Windows 7 Ultimate 64-bit
    Thank you.

    The temps for the graphics card are quite normal. I have the same one and under load it will go to 70 to 75C, depending on ambient. What Nvidia driver are you using? Did you do a new driver installation?
    If I look at your CPU though, then you are very close to the max CPU temp and throttling may invoke the shutdown    http://products.amd.com/en-us/DesktopCPUDetail.aspx?id=640&f1=&f2=&f3=&f4=&f5=&f6=&f7=&f8=&f9=&f10=&f11=&f12=
    62C is max.
    Could also be your PSU that's not completely stable and continuous power draw may cause Overcurrent or overtemp protection. Speculating here as to probable causes.
    Another possibility is your RAM. That should normally be paired in 2's. Have you tested with only 2 modules ? Remember we don't support that MB here, but its just another test I would run. But you would know, probably having run it like that with the previous GPU.

  • MSI GTX660TI Power Edition problems

    Hi all,
    I have a problem with Battlefield since I have installed my new GPU the MSI GTX660TI Power Edition.
    I have a Acer Aspire i7, with 6GB memory and a Corsair GS 800W, Windows 7 Home Premium
    Since I have installed my new GPU my game freezes and my systems tells me that there had been a problem with the Nvidia Windows Kernel mode and that it has been restored.
    It happens with both BF3 and BF4....while typing this topic message the same thing happens.....
    It also says Directx error....but I have the latest drivers....
    Could it be the Bios, mainboard or is my GPU not working as it should?
    Thanks for your help.

    List full system specifications, read >>Posting Guide<<

  • On my login page where my username is and I enter my password, there is a message someone has put there I'd like to remove, and we can't figure what setting to go to to edit it.  Please help.

    On my login page where my username is and I enter my password, there is a message someone has put there I'd like to remove, and we can't figure what setting to go to to edit it.  Please help.

    it's in system preferences > security and privacy > general > show a message when the screen is locked.

  • I use to have pages on my mac and i can't find it now ,all the work i have done in the pass can't be edit any moor please help me

    i use to have pages on my mac and i can't find it now ,all the work i have done in the pass can't be edit any moor please help me

    - Why not redownload/reinstall Pages?
    - Maybe by
    http://answers.microsoft.com/en-us/office/forum/office_xp-word/how-do-i-open-mac -pages-in-a-microsoft-environment/5c0b2ab1-96d8-42e2-bf17-354bd0bfcf01
    - If you have an iCloud account, in a computer broser go to icloud.com>sign in>Pages Beta and upload to iCloud. You can then export/email in Microsoft and pdf format.

  • [Request] UEFI GOP VBIOS for MSI R7750 Power Edition

    Hello, I need a GOP/UEFI Vbios for MSI R7750 Power Edition.
    S/N: 602-V271-08SC1208010276
    ROM: goo.gl/tphw4h
    (Temporarily I have no permission to post a http link, so I had to give a shorten one.)
    Regards!

    here it is
    for flashing: http://www.techpowerup.com/downloads/2306/atiflash-4-17/
    flash syntax from pure DOS, after booting from bootable USB key:
    atiflash -p -f -noaper 0 xxx.rom [ENTER]
    where "xxx.rom" will be your vbios file which you want to update

  • IPhone 4S is not charging. Upon connecting to macbook air, it gives the power surge alert. Please help.

    iPhone 4S is not charging. Upon connecting to macbook air, it gives the power surge alert. Please help.

    What do you mean by "power surge alert"? What exactly does it say when you try to connect it? If you're talking about the message about a USB device drawing too much power, that can sometimes be caused by a bad cable or something stuck in the port. Do you have another cable you can try?
    = L.I.

  • MSI GTX570 POWER EDITION helppp

    Hi, I just bought my MSI GTX570 POWER EDITION from amazon. And it seem to be some problem about this card. It runs poorly on the 3d mark11. And on starcraft2 it recommend the setting to only "meduim, suggested for 258VRM" but aren't the gtx570 is equipped with 1280VRM. Is there something wrong with my card? I have updated all the newest drivers already.
    3d result  http://3dmark.com/3d...8UuRNSxXxfNyXL9
    print scr http://tinypic.com/r/xm5wz8/7

    Quote from: freshlemon on 26-August-11, 12:27:02
    it says, "Your Score is Low Compared to Similar Systems.
    There may be a problem."
    is there anything i can do to improve the performance?
    It's not low, as you can see the most people with the same card has the same scores and they are into the same big graph as you
    Quote from: freshlemon on 26-August-11, 12:27:02
    is there anything i can do to improve the performance?
    Overclock CPU or install fastest CPU or OC the GPU further or both

  • MSI 645 ultra xp / 2000 problem please help.

    I've got 3 MSI 645 ultra mobos. I've tried every thing i can think off to get xp installed and working. I don't get as far as formating the hard disk in the setup. I relpaced the power supply with a qtec 550 watt power supply (the gold one). i've flashed the bios to 1.9, i've used different hardisks and cables. I've checked the memory PC2100 and 2700. It's a pentium 4 1.5, I've tried a 2g in it as well. I'm using an ATI radeon 7500 but have tried a s3 agp card. All the other components work fine in another machine but not on my 3 MSI boards.
    Please help some one out there must have had the same problem. I'll buy the first person who fixes it cakes!!!
    Ta
    Gus

    Hi,
    I ran memtest 3.0 and there were no errors. it ran for 9 hours.
    I am only using one hard disk at a time. it's set as a master on IDE1 and the CDrom is on IDE2 as a master. should I use cable select?? I also tried the hard disk and CD on ide2 and that did not work either.
    Ta

  • Text Box Dashed. Can't edit text. Please Help!

    InDesign CS4
    I made a catalog a couple months ago and when I opened it up to work on it again all my text boxes have a dashed outline when selected. I can select the box, but when I switch to the text tool and click it is unselected and I can't edit the text. When I try to highlight the text the text tool just makes a new text box (with normal outline). I can add new text in new text boxes. All the catalog pages are different files and the problem is the same when opening any page which makes me feel like its some setting in the actual program rather then the files themselves. Nothing is locked as far as I can tell and overriding all master page items doesn't help either. Somebody please help. Thank you!

    Sounds like your text frames are on the master page.

  • Graphics card and power supply, can someone please help me?

    Hello everyone so i bought the new game Dragon Age: Inquistion for my pc and the computer is only about 2 months old but the game is running slow so my graphics card isn't powerful enough and I can't figure out which graphic's card  or  power supply to get that will be compatible with my computer. From what i see i'm going to need both.
    pc specs
    »HP Pavilion 500-223w Desktop PC (ENERGY STAR) 
     Product Number:   F3D69AA 
    8 gb of ram
    150mm x 140mm x 86mm (5.9 x 5.5 x 3.4 inches) power supply 300wat (which i want to upgrade)
    This motherboard supports processors with the following Integrated Graphics:
    Intel HD Graphics 4400 (GT2)
    Intel HD Graphics 4600 (GT2)
    Integrated Graphics is combined with the installed processor.
    See the Processor upgrade information section of this document for detailed information.
    One PCI Express x16 slot (Gen 3.0)
    NOTE:Integrated video is not available if a graphics card is installed.
    can someone please help me?
    This question was solved.
    View Solution.

    Hi,
    I ran a simulator for the Dragon Age: Inquisition and the processor and memory in your HP 500-223w meet or exceed the recommended requirements. However, the video in your PC doesn't meet the recommended level even at 1024 by 768 resolution.  The NVIDIA 750 would also not meet the recommended requirements even at 1024 by 768 resolution.
    The power supply will need to be replaced to support a graphics card that will meet the recommended requirements.
    The Corsair CX600 would be an excellent choice as it matches up the existing HP power supply dimensions. $65
    The AMD R9 270 would exceed the recommeded requirements for Dragon Age: Inquisition. These are on sale from $100 and up.  Do some measuring inside yiour PC.  This Sapphire R9 270 model would be a good choice at $130 afer rebate
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Editing in iphoto, please help....new to mac

    Hi, I need to put text (text boxes) on many of the pics I take for work....I can't seem to do this on iphoto...any suggestions...PLEASE HELP.

    evassor:
    Welcome to the Apple Discussions. You can't do that in iPhoto. You will need to use a 3rd party editor from within iPhoto to accomplish that . Some of those that can do what you want are Photoshop Elements, Seashore (freeware), Graphicconverter and Pixelmator. You can find a number of possible candidates at VersionTracker.com by searching there for "image editor". Here's how you would use a 3rd party editor with iPhoto:
    Using 2 Image Editors in iPhoto
    If you want to use both iPhoto's editing mode and a 3rd party editor without having to go back and forth to the Preference pane, once you've selected the 3rd party editor as your editor of choice, reset the Preferences back to "Open in main window". Then when you Control-click on an image, you can select "Edit in external editor" in the Contextual menu to edit in your selected editor.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • MSI R7850 POWER EDITION 2GD5/OC vs TWIN FROZR 2GD5/OC

    I had to do an RMA with MSI for the R7850 POWER EDITION 2GD5/OC I had, and it turns out they don't have anymore inventory of it, so I'm accepting a R7850 TWIN FROZR 2GD5/OC as a replacement.
    The only differences I can spot immediately are that I may lose voltage control, the Core clock comes slightly lower, and the heatsink is model III instead of IV.
    I imagine I can just overclock with Afterburner if needed to up the core clock; I'm wondering if voltage control could also be unlocked though? Also is there any other difference that I should be aware of?

    general difference between Power Edition and models with Twin Fozr,
    is that Power Editions has Enhanced PWM Design and offers triple voltage control [compared to regular model: + memory voltage and + Aux voltage]

  • Mebody Keep on getting a message that says write access not granted if i whant to safe my edited images! Please help? Preview check box already unchecked

    please help me with this problem? I keep on getting a message saying write access not granted, so i cant safe my files!

    The drive appears in the sidebar with a tiny lock icon, and when I try to copy a file from my internal HD to the external (top level directory, or drag the items right onto the icon), the following things happen:
    Open the Terminal in the /Applications/Utilities/ folder and enter the following:
    chflags nouchg
    followed by a space; next, drag the disk into the Terminal window and press Enter. The lock should now be gone.
    The fact that my account was named both as owner and group seemed odd, since in Group the access was "read only".
    Recent versions of Mac OS X create a group with the same name whenever you create an account from the Setup Assistant or System Preferences. The Group permissions don't apply in this case.
    I changed the Group access to "read & Write", but it's not "sticking" -- when I close teh details field and reopen it, or close the get info window and reopen, the Group access settings go back to "read only".
    Did you get an error message after doing this?
    Verify/Repair permissions were dimmed for this drive (I assume becuase it doesn't have MacOS X installed on it?)
    That is correct. The Repair Permissions mechanism uses data from the /Library/Receipts/ folder on a disk to function, and this data is only present on disks which have Mac OS X installed.
    (12377)

Maybe you are looking for