MSI 785gtm-e45 usb not recognizing

HI all.  i just built this pc yesterday using this mobo MSI 785gtm-e45 with AMD phenom X4 2.5ghz along side with 2ghz of ram ddr2 800mhz and installed windows 7 ultimate 32bit . everything went well thru the installation of the os, cept  when i went to plug in my jump drive the lower right hand box said /!\ usb is not recognized. im using a ps/2 mouse and keyboard it connects thru the internet, i even downloaded drivers from the website and installed and still im getting that warning. any idea of wut could be the culprit

Quote from: Svet on 26-July-10, 07:10:13
>>If you are having problems with USB ports, read this topic.<<
I am having the same problems, but this is also affecting my onboard USB connections. I have disconnected the panel USB connections (they only had 8 wires anyway, so no need for the posted reply in that thread) from the mobo. I cannot even get the mobo to recognize a USB mouse plugged into a PS/2 adapter.

Similar Messages

  • MSI E350IA-E45 USB Not recognised after cold boot.

    Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
    And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work? 

    Quote from: mickas on 12-August-11, 20:09:58
    I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
    How did you connect up the USB ports to 5VSB?
    I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
    This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
    So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

  • MSI 785GTM-E45 Will not POST

    Hello All,
    I just assembled a new system from Tiger Direct and cannot get a good POST. Original problem was an electronics burning smell and no video but all the LED's and fans came on and Hard drive spun up. I took the RAM out and one of the DIMMs was so hot that the sticker peeled off. I put that one aside and took the one from DIMM 2 and put it in DIMM 1. I am now getting a 3 beep POST message. I think that is 3 long beeps and points to a memory error. Go figure huh? Should I first just try and find some cheap DDR2 and try that?
    System is just an AMD Phenom II using all the mobo sound and video. RAM is patriot ddr 2.
    Thanks

    >>Posting Guide<<

  • 785GTM-E45 - Will not boot

    I purchased a bare bones system from Tiger Direct for a basic livingroom multimedia pc to basically run Boxee and we browsing.  The kit included: MSI 785GTM-E45 DiabloTek Barebones Kit - MSI 785GTM-E45 Motherboard, AMD Phenom X4 9750 CPU, CPU Fan, Patriot 2GB DDR2 RAM, Seagate 500GB HDD, DiabloTek Elite ATX-Mid Tower Case, 450W Power Supply (Here is a link to the system: http://www.tigerdirect.com/applications/searchtools/item-Details.asp?EdpNo=500255&sku=B69-0367&SRCCODE=WEM2675N&cm_mmc=email-_-Main-_-WEM2675-_-tigeremail2675).
    I have built several systems in the past and I have never had an issue before.  I received everything in the mail and assembled but the system would power up for about 3 seconds then turn off - essentially the cpu fan would turn on then off immediately.  After doing some troubleshooting it turned out to be a bad power supply.  TD shipped me a new case and I transferred everything over and it now turned on just fine and stayed on.... BUT it would never load the bios, etc.  I have cleared the cmos, reseated and double checked for extra mounting pins on the MB case, reseated the ram.. no fix.  I even followed the "flow chart" here: http://www.msi.com/service/cannot-boot-up-properly/
    I have unplugged everything and put the motherboard on a nonconductive surface...same result.  Unplugged everything and unplugged the RAM hoping to get some system error beep.. NOTHING..ugh
    The motherboard powers up, CPU fan turns on, the HDD spools up and runs but that is it.  No USB ports light up, the DVD drive does not come to life and there are no system beeps and the monitor never gets any input from the motherboard.  I am not running a seperate video card - just the onboard video.
    What are some next steps for troubleshooting to get the system up and running?

    Exactly!  No beep codes at all.  I unplugged everything including RAM to see if I could start troubleshooting component by component but with no beep codes.  I have been swapping out RAM/HDD/removing from the case and starting it up on a non-conductive surface, you name it...no boot and no beep... 

  • MSI 785GTM-E45 Bios Startup Random Freezes Help?

    Hi all,
    I hope I am posting this in the right forum, because it is a bios startup problem. I have been searching the forums from here and other places extensively for the past few days as well as trying pinpoint the problem on my own computer. My problem is every now and then when I boot up, it takes a really long time to get past or freezes at "initializing usb controllers" or it just freezes on "hypertransport flood sync." Some people say its the cpu, motherboard, ram, etc... So I have just been testing to see which component is causing the problem.
    I recently purchased parts to build a new computer from frys. The parts are:
    1. MSI 785GTM-E45
    2. AMD Phenom II X2 555 BE
    3. Patriot Extreme Performance 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model PDC24G6400ELK
    4. Antec EarthWatts Green EA-430D Green 430W power supply
    5. PNY Geforce 240 GT
    6. 80 gb pata WD harddrive and NEC pata dvd-rw.
    At first I thought it might've been that I was unlocking the cores and they were unstable, turns out the 4th core is unstable. However, I still get the weird freezes at initializing usb controllers and hypertransport flood sync even when I am running the stock 2 cores. Plus I purchased another AMD 555 to test it out, and its the same. Then I turned my attention to the ram, I ran memtest86+ on it and the ram appears to be good. And I don't think it is the power supply either, I can't really test it cuz I only have one. It can't be the video card because I was having this problem before I even installed the video card (I was using onboard waiting for something to go on sale). I am beginning to suspect that it's just a bad motherboard. I have even tried updating the bios to 8.5, I can now support X6, but it still doing the weird random freezes.
    Was wondering if others had any ideas or suggestions. Thanks.

     For your current system as is that PSU will be OK. If you think you will be upgrading video to something beyond a 250GTS & x4 CPU then I would recommend the TX650W instead. newegg usually has the best prices for the Corsairs and only online store I buy from in the past couple of years.
     If you look at the specs at newegg you will see where it says how many rails it has. Also n'egg usually has picture of the PSU label and you can see there, it will show for example 2 rail: +12V1@18, +12V2@18, note the number after +12V. A single rail will have 1, for example the Corsair in your link +12V@30A

  • Msi 785gtm-e45 Video issues

    Hello everyone, hope you can help.
    I have just changed from a Lanparty Jr series (due to a bios failure) to a Msi 785gtm-e45 motherboard. Everything is okay apart from running the graphics card which does not output any video. I first thought this was a bios setting so I tried setting the video default to pci-e, no change. I'm currently running on the on-board graphics (HD4200) with the 9600gt also inserted, the odd thing is that windows sees the card so I installed the latest drivers and tried again but still no change. The card is functional as I had it running not long ago in my previous machine. I have also tried resetting bios settings to default. I have searched for similar threads and found a couple although none come to conclusion to the problem. My PC specs are as follows:
     - Athlon 64 X2 5600+ 2.9Ghz
     - Msi 785gtm-e45 v1.4 running bios ver 8.8
     - Corsair Ballistix Sport 4gb (2 x 2gb) DDR2 6400
     - XFX Geforce 9600gt 512mb
     - Hitachi HDP725050GLA360 500Gb SATA
     - Windows 7 Home Premium 64bit
     - Corsair VX550W 550w (41A @ 12v / 30A @ 5v / 28A @ 3.5v)
    Any help or advice is welcome.
    Cheers.

    Did you unplug your PSU from A/C power to properly >>Clear CMOS<< at any point after inserting the video card?  If not, please give that a shot.

  • MSI 785GTM-E45 BIOS CPU fan voltage control

    Hello MSI gurus,
    I've replaced the MB in an older HP media center with the MSI 785GTM-E45 running BIOS V8.8 out of the box.
    CPU = Athlon 64 X2 4200+
    My problem is the stock CPU fan has a 3 pin connection (voltage controlled) and is running at 100% speed all the time.  From what I've read on the forums there are a number of people that have this issue (with other MBs with 4 pin cpu fan headers) and don't want to switch to a 4 pin CPU fan (PWM controlled).  I am in the same situation.
    I am hoping that there is a BIOS for this board that has an option to switch to or enable voltage control on the CPU fan header.
    I have tried enabling the CPU smart fan target but no matter what settings I chose the fan remains at 100%.  The H/W monitor of the MB indicates a CPU temperature (33C) well below the target (tried all options from 40C to 60C in 5C increments). 
    I have tried MSI's dual core center and it had no effect on the fan speed.
    I have tried the 3rd party freeware SpeedFan and if had no effect on the fan speed.
    I am not able to check if I have the latest BIOS or even find changelogs for existing BIOS verions because MSI seems to only direct BIOS downloads for this product to the Live update application.  I have installed the live update program and it indicated V8.8 was the most recent veriosn of the BIOS for this board, although I have seen posts indicating the Live Update application is not to be trusted.
    Dual core center, SpeedFan, and Live Update have all now been uninstalled.
    I know the fan I'm using will change speed because I can connect a 3 pin fan controller and manually dial down the speed.
    I know the BIOS can read the fan speed becase it correctly shows the RPM changes when I use the hardware fan controller.
    Can anyone direct me to a BIOS version for this board (or some secret keystroke) that enables automated 3 pin voltage control on the CPU fan header?
    Thanks in advance for your time.

    For those who are interested I received the following answer from MSI technical support.  Personally I find this to be a flaw in this board's design.  I chose this MB to replace a dead MB in a HP media center for a friend.  If I was buying this board for myself I likely would be using it as a HTPC because of the mATX form factor, HDMI on board, and backward compatibility for CPUs.  However, due to the added cost of purchasing a new heat sink and fan I would be RMAing if I had bought it for myself.  Considering many of the top performing after market coolers still come with a 3 pin fan it was a poor decision for MSI to not include support for automatic speed control of a 3 pin voltage controlled fan.
    Quote
    Dear Sir/Madam,
    Thanks for contacting msi technical support team!
    We are sorry that because of the circuit designs,we could not add cpu smart function for 3 pin's connector fan in the BIOS. The difference between 3pins and 4pins is that the second has a temperature controller but the first does not.We would suggest you utilize a 4-pin CPU Fan in order to control the CPU Fan speed.
    Sorry for any inconvenience caused you!
    Best regards,
    MSI Technical Support Team

  • MSI 785gtm-e45 gpu overclock?? could it be??

    Hi guys, I'm new in the forum. Last saturday I bougth this motherboard (MSI 785GTM-E45) and I tried to overclock the ati 4200 integrated gpu but I can't. There isn't an option in the BIOS, not even with MSI Dual Core Center, or AMD Overdrive or ATI Tray tools or ATI GPU tools... so I would like to know if this new BIOS version has te option to change the MHZ in GPU. Thanks in advance!!

    Yes, that may be the case.  But this is a Micro-ATX-Mainboard which simply does not have this option in BIOS.  What is the point of overclocking the low-profile onboard-video chip of a mATX-Board besides increasing the chip temperature?  Overclocking onboard video chips is not going to turn them into high-performance full-featured video cards either.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • Have reinstalled ITunes correctly-after USB not recognized for new Shuffle

    New Shuffle- 1st time it says USB not recognized- Apple sends me info to uninstall and re-install I-Tunes- I-Phone is still seen- try Shuffle- first message says USB port recognized- next one says something about hardware not being installed properly. Try again and am back to the original problem- USB not recognized. Of course Apple Support is now closed- any ideas?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

Maybe you are looking for