MSI 787-G46 slowly boot and not load DVD drive after bios 1.6 beta2

I used bios version 1.5 without any problem. Now I loaded bios version 1.6 beta2 and when the PC starts at the lower right corner of the screen appeared the letters A2 for about 10 seconds, which was not. So I gave back 1.5 bios and the problem persists. I also found that it has the effect that the system does not load DVD drive.

Quote from: makac on 23-October-13, 12:40:18
In the new bios 1.6 beta 2 added item: Patch SATA driver detection issue and add item to control.
I do not know where it's set in bios, can not do this problem?
I was having similar issues with this bios after enabling RAID the hard drive BBS listed my drives multiple times and wont let you change the order, also trying to boot to the operating system would just display some EFI shell. I can only assume we will need to wait on another release for a fix.
https://forum-en.msi.com/index.php?topic=173627.0

Similar Messages

  • Safari slow and Not Loading Web Pages after changing Modems?

    Hello...I recently changed from an AT&T DSL modem to a Knology Cable Modem to improve speed and overall network capablity.  However, ever since I have changed I have had problems with Safary lagging or not loading the websites.  It doesn't do it all the time, but periodically.  Sometimes it is worse than others.
    Basic issue: When using Safari, it stalls when loading a website.  Sometimes it will load, other times it will say that Safari cannot load the website.  If you wait a while and retry loading it, it may then load it.
    Has anyone else seen something similar to this or know what I can do to fix the problem?  It is rather frustrating.
    Thank you,
    Jim

    If Safari is getting very slow:
    (Presumably you regularly empty your Safari cache by deleting the following file:
    Home/Library/Caches/com.apple.Safari/cache.db
    and clear your History)
    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
    http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
    and here:
    http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)

  • Install iTunes 7.6, and loose my DVD Drive after it.

    I run: Windows Vista Ultimate PRE-SP1. Lite-ON Blu-Ray DVD Player.
    I install iTunes v7.6 and get the following after reboot:
    "Warning! iTunes was not properly installed. If you wish to import or burn CD's you need to reinstall iTunes."
    My DVD drive is no longer recognized by my computer. Windows Hardware says there is a driver error. Re-installation of these Drivers results in same error. Upon removal of iTunes the error magicly dissapears and there is my DVD drive again.
    Please Tell me someone knows of a hotfix for this issue! I am missing my iTunes.

    No this is an Apple issue. I ran out and bought 4 Mac's laptops last year when I had to buy a "Vista" computer.
    Because of my business I have to use PC (software). since I purchased Vista I was unable to use my 3 video pods (my kids and mine). itunes did exactly what you are discribing here. I totally blamed microsoft..
    HOWEVER after downloading service pack 1 and purchasing a new iphone 3G it was working like a charm ....NOT a problem. I used "mobile me" to sync my outlook and was happier than I had been in over a year with BOTH my PC and Mac.
    After the upgrade last week (I upgraded 8-1-08) my PC sees the CD/DVD drive however itunes is disabling it. I have a ton of software on my PC Office ultimate 07, Photoshop 6 Roxio 10 all of it. NONE of those had updates.
    I am NOT happy with the thousands that I have placed into apple the last 6 months. I really thought this was Microsoft...it is not.
    I am lucky because I have a Mac Pro to sync my iphone too (even though I am NOT proficent on a Mac yet). I actually signed onto these boards to see if I could run it on Mac since I installed it on PC..
    I tried to see if I would downgrade to the previous version ...no luck...apple likes to install as soon as you boot up...I also tried to restore to a previous time (prior to the upgrade) that also didn't work..itunes again downloaded immediatly after a reboot.
    Apple needs to get a fix...I was going to automate a business with MACs...I have my kids on both now..I have an appointment with their business sales..
    I think I will bring this computer in and tell them we will talk AFTER you fix this simple problem.. I would HATE to lose patients medical records because of a bad download.

  • Boot and page load very slow after 2nd HD install

    Good morning.
    I recently added a second slave HD (80 GB with a OS X partition) to my beige G3 MT. I am using the original 9 GB drive as the boot drive. Northing else was changed.
    Since that time, the boot time has increased significantly (2-3X pre 2nd drive).
    Also, page load times have been increased with the Norton AntiVirus symbol being displayed.
    1. What's causing the slow boot? Is the CPU looking at the new drive and applying Norton before the original boot drive?
    2. Are there settings in Norton that might help?
    3. Is it even worth continuing Norton use for this OS 9.1 machine?
    Thanks for your time!

    Hi, Bruce. NAV is probably scanning the entire new drive at startup, thus accounting for the major startup slowdown. And no, there's no good reason to have NAV installed at all. Your Mac doesn't need antivirus protection.

  • Why is my mac book blank and not loading when I turn it on?

    Why is my mac a blank screen when I turn it on and not loading?

    Jasmin325<
    Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
    https://discussions.apple.com/docs/DOC-5431
    A couple of shots in the dark here.
    Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
    Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

  • My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

    My LG G3 gets stuck in an "updating" loop and not load new emails. How do I fix this?

    If you toggle Airplane mode On/Off, does it resolve?

  • I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - Try the remaining items of:
    iOS: Troubleshooting applications purchased from the App Store

  • I just got the first get and im trying to download the ios onto it and it will just stop and not load anymore how do i make it keep going?

    i just got the first get and im trying to download the ios onto it and it will just stop and not load anymore how do i make it keep going?

    You are only as young as you feel......
    This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on only the albums or playlists that you want to sync.
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want.

  • Safari is loading webpages extremely slow and not loading images...

    Not loading webpages a lot of the time and not loading images on sites such as Facebook, Twitter, etc. I'm new to Mac and I'm running Safari on a Mac Mini. Help? Also deleted ~/Libraries/Safari and it didn't work.

    Please answer as many of the following questions as you can.
    1. Have you restarted your router and broadband modem since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    2. Are any other web browsers installed, and are they also slow?
    3. What about other Internet applications, such as iTunes and the App Store?
    4. Are there any other devices on the same network that can browse the Web, and are they also slow?
    5. If you can test Safari on another network, is it slow there too?
    6. If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • FCPX hanging and not loading

    Hi there, I'm trying to reopen a job on FCPX and seems to be hanging and not loading. Can someone please help
    This seems to happen often
    Alf

    I dragged Event Renders to trash and renamed event files using back up files
    2 events work however the remaining 5, still does not allow me to load project. so at this stage the only way I can open project completely is with 2 events which means half project is offline. is there an easy way to manually add the events/footage so I can relink the missing files on the timeline?

  • FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk

    FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
    I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
    Since when I start FCPX it too cannot finnd the project or event directories.
    Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
    Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
    Please help if you can.
    Thanks
    Barry

    Thanks... alas no one has responded.
    I think I have the structure that you are recommending.
    I have a root level directory (Final Cut Events) with the files in them.
    The puzzling thing is that it used to work before the migration!.
    Anyway I'm going to move the contents to the root and see what happens.
    On a slightly different note...
    I also posted a question about CPU utilization. Can I ask a question or two?
    While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
    However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
    What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
    Please look at the attached utilization for CPU and disk activity.
    Thanks for any thoughts... Barry

  • NTKERN.VXD could not load device driver

    I just installed the MSI 6380LE board with an AMD 2100+ CPU.  I have the nVIDIAGe2 Ti video card.  Two problems.  When I restarted the computer after transfering my WD 20Gb HD, Phillips CD-RW, and SMC lan card to my computer it went thru the New Hardware sequence.  No problems there.  My printer was detected on the USB port in the back.  However, when I went to print, got a cannot communicate with printer error from my Lexmark printer program.   I went to my device manager and noticed that the following occurred:
    VIA VT83C572/VT82C586 PCI to USB Universal Host
    ---> USB Root Hub!
    This is repeated three times in the device manager.
    When I click on properties for the USB Root Hub it tells me that the NTKERN.VXD could not load device driver.  
    Second issue.  I have a new case that has front USB ports, however, the pin connectors are all separated and I am not sure how to hook them up to the MB correctly as I did not notice in the manual the pin assignments for those connectors.  ANY help is greatly appreciated.  And yes, USB is enabled for all in my BIOS setup.
    Thanks in advanc!!!

    well I did the same thing with my KT3 Ultra ARU, but it works fine other than the low system stability and generally slow behavior of the HDD's since they were not optimized for this board.. but generally everything works fine, but I will need to reload windows in order to have everything moving smoothly again, plus when you do reload windows you will notice a definite speed increase, and if is generally a good idea to back up your important files and do a clean install ever so often, Most IT techs reinstall their OS's every 6-8 months.

  • Failure when connecting MS SQL SERVER from ODI ! could not load JDBS driver

    i have some trouble with connecting MS SQL SERVER from ODI.
    I have already downland jdbs driver 3.0 (and 2.0 ) and copy the sqljdbc4.jar to D:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers( where the oracle jdbs driver is already exitst )....but i have this error :
    could not load JDBS driver class..
    thanks

    After more investigation and even more chocolate, we've identified the problem and it's now working. For anyone else who strikes this problem in future, here's something to check/consider/try:
    Even though Squirrel SQL Client was connecting and working ok using the MS JDBC driver (v 3.0), it recorded this in its logs:
    Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the INTERSECT operation.
    We've found that the open source jTDS driver does not have the same issue as the Microsoft one.
    We've installed the current jTDS driver, recorded the driver name (net.sourceforge.jtds.jdbc.Driver) and the JDBC URL (jdbc:jtds:sqlserver://<hostname>:1433/<database>) and the connection is now working fine.
    Hope this helps other people...
    Thanks to those of you who offered suggestions and things to check...much appreciated.
    Robyn

  • VDS didn't start: Could not load JDBC driver

    Hello,
    I want to start the VDS Tutorial, but I get an error:
    Exception: Data source 'Derby database' failed. Check your CLASSPATH! (in Tools
    -> Options) Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
    Shutting down...
    Data source 'Derby database' failed. Check your CLASSPATH! (in Tools -> Options)
    Could not load JDBC driver 'org.apache.derby.jdbc.EmbeddedDriver'
    But I add the derby.jar file in the VDS under Tools - Options - Classpath
    Have you any ideas...?!

    I try to start the server without the tutorial and that works...

  • Mail does not load the mail after opening with 10.10.3 on macbook air

    Mail does not load the mail after opening with 10.10.3 on macbook air

    Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
    If it's red, this usually means it's missing the password.
    For Incoming messages, set in the account window, under Account Information tab.
    For Outgoing (SMTP) messages, follow these steps:
    EDIT SMTP SETTINGS
    In Accounts window > Outgoing Mail Server SMTP:  select to Edit SMTP Server list... from popup.
    Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
    Under Advanced Tab:
    Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
    Verify if your server require SSL.
    User Name. Enter full email address  eg.  [email protected]
    Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password  more info)
    Open Connection Doctor under Window in the Menu bar.
    Do you see green light now for your account SMTP?

Maybe you are looking for