Msi 7900GT driver install problem

Hey all,
I have a problem installing my msi gf 7900GT... this is a fresh win xp sp2 install, everything works smooth, but when i try to install my gfx drivers, i get a black screen with white dots, right after the install, then i reboot...
after the reboot, my screen goes on and off , and while my screen is on, my pc goes very slow, cpu usage = 50 %...
i have installed thix gfx on this exactly same pc without any probs...
when i uninstall the gfx drivers, everything is aok .. so any help would be very welcome ! thx
pc info:
p4 3.4 D
msi 975X platinum
msi 7900GT PCI
160GB SATA HD
2 x 512 DDR2

Quote from: Stu
if you do have a PSU in your PC, have a look on the label on its side and post its specs
Quote from: foofio
tried out an other psu , 500W , but still the same probs, and it worked perfect before with the same exact psu ... so don't really think it's the psu that causes the prob...
7900GT needs a lot of power, so you need a good quality stable PSU. without knowing more about your PSU, it is difficult to say if your problem is power related or not
the other thing you need to try is to test this VGA card in another known working computer, then you can see if the problem follows the card, or stays with your computer

Similar Messages

Isight driver install problems

Hello all, well after installing SL then Win 7 then running bootcamp inside windows almost everything is working correctly. The only error i'm faced with is the iSight drivers do not want to correctly install. At boot up i get a driver install error but when i go into the control panel it says the device is working correctly. Anyone else run into this problem?

Tnx, but the club sux! ;P
I?ve now tried everyting...
all other PCI card removed
onboard lan disabled
tried all pci slots
installed a fresh WinXP x64 and did driver-add on the soundcard first thing, in all slots etc
cut back on perihpals for more power
updated MB Bios
NOTHING works (
And yes, I have a valid ID number PCI\VEN_02&DEV_0005&SUBSYS_00202....
Whats left but RMA!?!
Hmm, just remembered, didnt disable the USB ports... can it... no.. or?!?
*gone checking*
/M

Driver install problems on X

Hi my name is Mikael and I?m about to go nuts.... AARHG!
Seriously this has been the toughest hardware to install ever, and I?ve been into PC hardware modding etc for 0 years! not that I?m an expert because of that but....
to the problem....
Doing a normal install with the included install CD gets me to the "driver install" part in the setup, at 84% completed, the computer stalls... reboot takes me back to the start with partial stuff from the install still in the system but not uninstallable as there is no SB X-Fi line in Add/Remove program.
Uninstalled the drivers with the application in the support directory on the install cd... rebooted and installed only the driver with the same app, and some minutes into the install the computer stalls again...
Manually installing the drivers via add/remove hardware gives me a lovely Bluescreen.
Installing in Safe mode works until I boot back to normal mode... either I can't even get into windows before I get a bluescreen or I sometimes get in and no hardware drivers have been installed says the Device manager, and wants to install the device again... resulting in one of the above scenarios...
Tried using IRQ 5 and on two different PCI slots, disabling a hardware sharing the same IRQ once, didn?t make a difference... Disabeling Onboard Sound card AC97 in MB-Bios gets me the message when booting to windows "the soundcard/hardware that uses this software can't be found....."
Sorry for the long post, but I hope I gave a understandable explanation to my problem so someone can help me as I would be very glad if someone did! ;o)
Cheers!
Message Edited by Mikae on <SPAN class=date_text>0-05-2006 <SPAN class=time_text>02:42 PM
Message Edited by Mikae on 0-06-2006 0:22 PM

Tnx, but the club sux! ;P
I?ve now tried everyting...
all other PCI card removed
onboard lan disabled
tried all pci slots
installed a fresh WinXP x64 and did driver-add on the soundcard first thing, in all slots etc
cut back on perihpals for more power
updated MB Bios
NOTHING works (
And yes, I have a valid ID number PCI\VEN_02&DEV_0005&SUBSYS_00202....
Whats left but RMA!?!
Hmm, just remembered, didnt disable the USB ports... can it... no.. or?!?
*gone checking*
/M

MSI 770 c45 audio driver install problem

Good day,
I have built a system consisting of
MSI 770 c45 mb
Athlon II 245
4 gigs ram markvision
1000 gig (storage) and 320 (os) hitachi hd
9400 gt video card
media card reader
dvd burner (liteon)
generic case and power supply
the problem I am getting is that I have installed Windows xp with sp3 slipstreamed and I am getting problems installing the audio drivers from either the cdrom that came with the mb or from msi website. Lan & system drivers are installed.
I have upgraded the bios
I have booted up with Ubuntu 9 live cd and I can get sound. which means the audio section of the mb is ok.
I have tried to install the driver in safe mode and still no luck.
Help!......... I have no idea what to try next.

https://forum-en.msi.com/index.php?topic=115476.0

Msi tv vox instalation problem

Wem i try ti instal the driver wo coms with the cd , apend a error ( the language of the windwos xp is diferent that the new one that cames whith the cd) só i cant see instal the product, please hel me.
Its the first thing that i by from MSI and the last one too .

now i have a problem with the sound , wem i recorde a movie the sound have a delay , MSI SUCSS , MSI feddback

NForce driver install problem

I downloaded the nForce XP 2.45 drivers. When I double click on setup, the nVidia logo pops up with the progress bar reading "NVIDIA nForce Drivers Setup is preparing the InstallShield Wizard, which will guide you through the rest of the setup process. Please wait." When the blue bar goes to the right and finishes, it just stops. The nVidia logo and the progress bar disappear and nothing else happens. No install, nothing. Any insight as to how this can be fixed will be greatly appreciated. Here are the specs of my computer:
AMD Athlon XP 1700+
MSI K7N2 Motherboard
Envision 910e 19" Color Monitor
Windows XP Professional Edition
128 MB DDR GeForce4 Ti4200 Video Card
1024 MB PC2100 DDR SDRAM
40 GB 7200 RPM Western Digital HD
Lite-On 16X DVD ROM
Lite-On 24X10X40X CD-RW Drive
VIA AC'97 Audio Card
Teac 1.44MB Floppy Drive
NVIDIA nForce MCP Networking Adapter
Toshiba Cable Modem with AT&T Broadband Internet

Thanks for your responses. You brought some things to my attention that I forgot to include in my original post. 1) This is not a new build. I just want to update my drivers 2) I am reluctant to delete my old drivers for fear that I might not be able to reinstall them. And now, the driver CD that came with the motherboard is experiencing the same problem. 3) Restarting the computer did not help. I don't think the file is corrupt since now I am experiencing the same problem with the CD. Are there any programs/services/etc. that could cause this problem if disabled? And the Detonator drivers install fine. I'm really stumped.

Sound Driver and Driver Installment Problems

I have been having trouble trying to get my sound driver to work on my
MacBook Pro in Windows XP. After updating my MacBook with all it current
upgrades, I loaded up Bootcamp to install Windows XP now, I have followed
all the instructions in the guide and have succefully installed Windows XP but,
when I run Windows and start to install the Drivers from my Mac unto
Windows, close to the end I get a message that it could not finish properly.
Now, I find that all runs well except an important thing like my sound. I go
into the sounds control menue to see if there is a driver and as i suspect
nothing. I also check for my network and nothing and same for my eject
button, that doesnt work either. Please if someone can assist me on this
problem it would be much apprecitated and that way I can use my music
programs which I have not been able to use.

Your question has nothing to do with the installation of OS X. Post it in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Driver Installing problem photosmart 5522

ENGLISH
I can not install my HP printer to my notebook with Windows 8 X64.
Not with the disc and not by download
Printer HP Photosmart 5522
It starts installing and then stops suddenly with the following message:
installation Error
Invocation of Driver Package Install Error 13 has yielded package 'C: \ Program Files \ HP \ HP Officejet 6500 E710n-z \ DriverStore \ Pipeline \ hpvpl09.inf
HP print and scan doctor + the installwizard don't help.
Can anyone help me?
PS. the error is translated from Dutch to English
DUTCH
Ik kan mijn printer HP niet installeren op mijn notebook met Windows 8 X64
Mijn printer: hp photosmart 5522
Niet met de bijgeleverde disc en niet via download.
Installeren start en stop dan plots met volgende melding:
Installatiefout
Aanroep van DriverPackageInstall heeft fout 13 opgeleverd voor pakket 'C:\Program Files\HP\HP Officejet 6500 E710n-z\Driverstore\Pipeline\hpvpl09.inf
HP print and scan doctor + de instalielwizard helpen ook niet.
Kan iemand mij helpen?
PS. de error is vertaald van nederlands naar engels

Hi @svennius,
Welcome to the HP Forums!
I understand that you are having a problem with installing your HP Photosmart 5522 on Windows 8. I am happy to help!
Some questions, if you do not mind:
How is the printer being connected? Wireless or USB?
Are you still able to make copies with your printer?
Do you see any error messages on the printer's display screen?
In the meantime, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Reinstall using the HP Printer Install Wizard for Windows.
Hope this will help, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Satellite S3000-X11 - Display Driver install problem

Hi,
I am trying to install the display driver for my laptop and have downloaded the zip file 'display-20080414134834' from the Toshiba website. This file contains both a BIOS update and the display driver.
Unfortunately when attempting to install the BIOS update I am told that I need to insert a floppy disk, which, sadly, is impossible given that this model of laptop does not have a floppy disk drive! It only has a DVD Drive, and not a rewritable one at that. Secondly, on attempting to install the display update (having failed with the BIOS) I am told to insert the disk containing Setup.exe. I don't know if this refers to the aforementioned floppy disk or another CD that perhaps came with the computer. If it did come with the computer however, it is not in my possession now (this is a second hand laptop that didn't come with any driver software).
My question is how am I supposed to install this update and driver without a floppy disk drive or a cd containing setup.exe? Is there a way to get around this? The file I downloaded was the only available one from the Toshiba website, so there doesn't seem to be one available which doesn't require either of the things I'm lacking.
If anyone can help I would be very grateful because this is preventing me from playing some computer games!
In the meantime the generic driver is fine for browsing the internet etc.
My operating system, by the way, is Windows XP Professional.
Processor: 1.1 GHZ Celeron
RAM: 256mb
Please help!
Thank you.

Thanks for the reply, I didn't buy a floppy drive but you put me on the right track for a successful workaround.
I used a programme called Virtual Floppy Drive (available at http://chitchat.at.infoseek.co.jp/vmware/vfd.html) to create a disk for the bios update. I was then able to install the graphics driver without a problem. I'm quite amazed that this worked, but it did.
So, there's a possible way to get around this problem.
I'm off to play all the video games I haven't been able to play for a while! Haha.

Lenovo g580 2189 driver install problem

I have a lenovo g580 with windows 8
when i try to install drivers i get some errors,any driver with other error:
smart audio hd with dolby- failure with non reason'
tuchpad ealn....-"ask for dspint package"
i download all the drivers from lenovo official web and i have energy mangement for windows 8
one more problem is in "fn" function,i dont see any fn function in the screen (no wifi,bluetooth,tuchpad,camera....)
only music. when i touch fn+f5 to turn off/on wifi the system shows on "airplane mode".
thanks

finally did it!!!! i had the same problem and now it works!
you first install the driver, and will tell no driver found ..., then go in C:\drivers\Bluetooth Driver (CyberTan, Liteon)\Broadcom\Win64 and execute Inst.exe and let it install all what it needs, don't press anything. if it still not works try install the same exe after activating bt with fn+f5.
win64 is for the one who have 64bit and I think that win32 will work for the one who have 32bit.
le: I have win7, i think it works the same for win8.. try it..
le2: and something else, I disabled UEFI from bios. I don't know if this is important, but it works for me with UEFI disabled.

ODBC Driver Install Problem.

Hi,
I am having a problem installing the Oracle ODBC driver from the Oracle 9i 9.2.0.1.0 client CD onto a Windows 2000 professional SP4 machine.
The Universal installer says everything is installed but the driver does not appear the the Windows ODBC adminstrator. Having a quick look at the registry they seem to be installed but they do not appear in the list when trying to set up a new data source.
The client install works OK as SQLPLUS and the other tools are fine.
Has anybody else had this problem?
Thanks,
Richard

Thought I would post this, as it's taken me a whole morning to get to the bottom of it - but I cannot find it anywhere else on the Web, and it will hopefully save a lot of frustration!
WARNING - ALTERING THE REGISTRY CAN SERIOUSLY AFFECT YOUR MACHINE - DON'T BLAME ME IF THE FOLLOWING DOES NOT WORK, AND DO NOT PROCEED IF YOU ARE IN AANY WAY UNSURE OF WHAT YOU ARE DOING!!!
The 'Drivers' tab in the ODBC Data Source Administrator will only show a maximum number of drivers, as the number shown appears to be limited by the size of the registry key(!!!!!). Whether this is a limit on characters, or size, I do not know, but the ODBC Data Source Administrator 'Drivers' tab will not read past a certain number of characters in the registry key HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers. Anything beyond around 5830 characters (it seems to vary depending on the key name, and this is according to Word's 'Word Count' functionality - and this includes blank spaces, so it may be size related) is ignored.
To replicate this....
# Export the registry key HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers, and take a copy of the file for editing / trashing
# Open the copy in Word, and do a Word count
# Chop it until the last entry takes you over 5840 characters
# Delete the registry key, then MERGE the copy back in
# Open the ODBC Data SOurce Administrator, and look in the 'Drivers' tab for the last driver that was in your Registry, you will see that it is cut off at the end!
E.g. My last entry is "IBM WTX Oracle Wire Protocol"="Installed" and this just shows up as IB in the 'Drivers' list, with 'Version' 'Company' columns etc all blank.
So if you are in a large organisation like ours, and no-one ever bothers to clear the things out, then even if you have the driver registered in the registry key , it will not show up if it is too far down the list.
Can I get a prize from Microsoft for finding a bug in their OS? I hereby name this the 'Blowtree Effect", and will happily take cash or a new iPad for my troubles!

GX630 bluetooth driver install problem

I got the GX630 a week ago.... I tried turning on the Bluetooth and it tried to install the device but it couldn't find a driver when I pointed to the CDrom driver disk. I read the manual and browsed the MSI driver download page for the GX630 and no bluetooth driver is listed. The manual says the bluetooth is in combo with the modem. Does this mean the modem driver is used? Thanks in advance.

Look here for bluetooth drivers: http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513

MSI PVS Software Install problem

Hi,
I'm having a problem installing the MSI PVS software...When I start 'SETUP' the Intervideo PVS screen starts, all activity stops for about 4 seconds, and then an error message appears: 'Setup can't continue, RPC call failed / RPC can't start' (rough translation, original message is in Dutch).
Anyone seen this before ?
Other software installs without a problem, no viruses (Norton Antivirus Latest edition and updates), no Blaster worm related RPC thingy. Blaster removal tool couldn't find anything...
Radio part and soft works fine, WinDVR3 demo version installs without a problem...and TV part is functional. No remote functionality though.
Any suggestions to get the original soft working ?
System: Win XP Pro SP1
AMD Athlon 2000+
CSE K7S6A motherboard, no overclocking
512 Mb DDR
40 Gig IBM HD
Hercules Radeon 8500LE 64 Mb
2x LAN Network card
TV@nywhere MSI
Nokia 17'' monitor
Sound Blaster Live

my suggestion is ... Dont bother
just use Girder and the msiremote plugin for the remote (I do and it works great )
for capture I use VirtualVCR - freeware and full sourcecode available

MSI Media Live install problem

Just got myself a Media Live but I have a little bit of a problem with it and I hope someone can help me...
I've tried installing many different OS on it from Windows XP to Vista to 7 and even tried the XBMC live OS but all have the same issue... install fine until the reboot, black screen, then screen garbage (like a mess on the screen).
It's connected via HDMI as I don't currently have another way to connect it.
Spec is...
AMD Athlon 64 X2 5600+ 2.9GHz Socket AM2 512KBx2 L2 Cache OEM Processor
Extra Value 2GB Kit (2x1GB) DDR2 800MHz PC2-6400 240pin Extra Value Ram
Western Digital WD3200AAJS 320GB Hard Drive SATAII 7200rpm 8MB Cache - OEM Caviar Blue
Now I know the 5600+ isn't in the list of CPUs which are compatible however it is recognised after a bios update.
Also, my ultimate boot CD's "portable" version of XP runs fine on it too, reports the CPU, all the ram, everything.
Any help is much appreciated. If it sounds like it's the CPU then I may toy with sending the 5600 back and getting something else (advice).

That's my last resort at getting it working as it'll add a further £50 to the cost of the machine as I can't return the 5600+ (it'll be covered in thermal grease) and have no use for it for anything else.
The power used by the 5600+ (65 W) is the same as the 5200+ (which is in the list) and the PSU is more than capable of providing it. Also, with the "live" (portable) version of XP running fine on the PC I can't see why the CPU would be the issue...
Specs of the 5600+ (my CPU)
* Core Speed (MHz) - 2900
* Wattage - 65 W
* L1 Cache Size (KB) - 128
* L1 Cache Count 2
* L2 Cache Size (KB) - 512
* L2 Cache Count 2
* CMOS - 65nm SOI
* Socket - AM2
* Revision - G2
Specs of the 5200+ (listed as being suitable)
* Socket - AM2
* Model - AMD Athlon 64 X2 5200+
* Revision - G2
* Wattage - 65W
* L2 Cache Size - 1MB
* Core Speed MHz - 2700
* CMOS - 65nm SOI
Other than the core speed I fail to see how these two CPUs differ.
I'm not ruling it out, I just can't spend a further £50 on this machine, I would rather spend less on a new mobo which does support the CPU.

Nokia N80 driver install problem

I have downloaded the newest nokia pc suite and have connected my brand new nokia n80 via the usb cable to the USB 2.0 hub which is then connected to my computer. My problem arises however when I the computer tells me it has found new hardware on device USB 2.0 HUB i then select the option to install automatically then after a bit of searching it says the device may not work properly as the driver has not been installed so could anyone tell me how to fix this problem or give me a link to download the driver??

heres some pics to show u what i mean.
http://img459.imageshack.us/img459/605/1xh9.jpg picture 1
http://img529.imageshack.us/img529/6079/2tp5.jpg picture 2
http://img529.imageshack.us/img529/181/3oe1.jpg picture 3
http://img459.imageshack.us/img459/8862/4tm5.jpg picture 4
http://img92.imageshack.us/img92/5297/5qk7.jpg picture 5
i hope these pics help you to understand what I am talking about also the last picture has the dialouge box telling me to change something via the phone UI how would I go about doing this??

Msi 7900GT driver install problem

Similar Messages

Maybe you are looking for