Msi 7950 green lines

got a replacement 7950 from msi via rma about 10 months ago been running through hdmi.ive had to change to dvi now I have green lines through the picture.an xbox was connected to the tv via dvi runs fine.the tv im using now has no hdmi hence the dvi.any help appreciated.

can you show a photo to show us?
have you tried different cable?
btw this green line sounds familiar to me,
i remember they appeared in some conditions when using external display,
but don't remember details about it

Similar Messages

Strange green lines with ATI 4850 iMac in Aperture, then crash.

Well, I have been running my iMac, 3GHZ, ATI 4850 for about a week now. I have had 2 lockups in OSX, 1 in boot camp and 1 graphics crash.
In OSX, all the crashes/lock-ups happen after I get these strange green lines, artifacts, that run across part of my screen. They change in length but generally always run horizontal. I can seem to find a way to post pictures here, but I have a couple screen grabs here:
http://atothe420k.blogspot.com/
Since I have to power off in the middle of Aperture, I am also getting corrupt databases, which take forever to rebuild.

Well, I called into Apple Care, after my machine crashed again twice today, once in a web browser and once under EveOnline. The person said to download and use some fan control software. It installed, but didn't do much, couldn't get it to change fan speed or anything else.
I installed iStatPro, which is great, and kept checking the temp of the ATI card, it would crash when the temp was up around 65-70 degrees C. Not sure if that is high or not.

24" iMac displaying small green lines

I'm having a big problem with my iMac 24" when I'm using Aperture or iTunes music videos in full screen mode.
I am getting groups of little green lines about an inch long and a pixel or two deep, stacked in groups of five or six on top of each other like a small wavey flag. These little "flags" are spread all over the display and make for one annoying interuption of either the video I'm watching or the photos I'm editing in Aperture.
Sometimes when I'm scrolling through my shots quickly in Aperture the lines become much larger and then red and blue blocks of lines appear, they disappear again when I give the scrolling a rest for a minute or so.
I'm using 2Gb RAM, the 9600 graphics card and all my software is bang up to date.
Any ideas any one?
John
Cheers
iMac 24' Mac OS X (10.4.8) 2GB RAM, 256Mb,

Clean erase and reinstall to factory conditions did not help with the graphic corruption/glitches.
Here are the actions I've performed so far:
•Got iMac on Tuesday (three days ago) and proceeded to immediately install all updates, including the EFI 1.1 firmware update
•Installed Aperture, the problem started showing itself sporadically
•As I imported more and more Aperture projects the problem started getting more widespread, it started showing up in Dashboard (problem is equal on both internal and external monitors)
•World of Warcraft started showing the flags/squares/lines in the menus, as well as major geometrical corruption in the 3d views (planes intersecting the world, characters warping, etc.)
•Reset SMC (unplug all cables, wait 15 seconds, plug back in without holding power button)
•Reset PRAM/NVRAM (several times)
•Ran without any software in background
•Ran Memtest (5-pass, single user mode for max available RAM) all tests passed
•Ran Apple Hardware Test three times, once the standard test, twice the extended, none show any errors
•Wipe drive, reinstall from restore discs, no updates installed whatsoever, no additional software installed, and it still exhibits the error inside of PhotoBooth, just as it did before, and just as it did for Janet in the post I link to above. PhotoBooth seems to show the most artifacting when the effects are turned on.
I'm taking it in tonight, we'll see what they say. I will keep this thread updated with my actions and any responses I receive.
One thing I feel I should mention is that I don't think it's Aperture's fault. It's just the main indicator for us since we all use it and it makes heavy use of the GPU.
Also, my problem started out small and got bigger over the 2/3 days I was using the machine, indicative of a developing hardware issue. If it was a software glitch, it would be less likely to behave that way.

My macbook pro keeps flashing green lines across the screen then freezing, can anyone help?

Back in December my macbook started doing this thing quite regularly where it would flash black or green lines all across the screen, for maybe half a second, then the screen would freeze, so I would power it down manually then back on again. I took it into a store and paid a lot of money for them to "fix" it, but when I got it back it was still doing it. I just recently took it in to a different store and the guy said he couldn't reproduce the problem, but replaced the RAM and gave it back to me. Within a day of having it back the same thing happened, twice. At this point I'm not sure what to do, the money I spent on "fixing" it could almost have bought me a new one. The most recent time I shut it off, when it was turning back on it stopped on the grey screen with the apple and started making a continuous beeping sound, which I took a video of. Does anybody know why any of this is happening??

Hi Were you using the apple store for the repairs you had done? As to the point of taking in to a store to have it repaired and getting it back with the same problem. It should have been taken back to the same store as they have to stand behind what they do. You do not say what they repaired. The store replacing ram without knowing what the problem is ,is questionable. If you are going to change ram for the original apple installed ram, you need to make sure it is compatible with your MBP. One of the best sources for this is Macsales.com. As to the Beeping sounds here is a link on it. You do not say if this is one continuing beep or more than one repeating itself.http://support.apple.com/en-us/HT202768

Laserjet 2605dn color printing problem, Blue/green line on page.

I have an HP color laserjet 2605dn that has started to print a faint,thin blue/green line from top to bottom about 3 inches in from the entire right edge of every page. I ran the cleaning cycle with no change. Any suggestions on how to correct this?

I have very similar problem on my 2600n which is printing 2 vertical green lines very close together about 1.5 inches from left edge. All toners are in supply override mode with black toner reading: Estimated Pages Remaining 0
Color cartridges contain toner with 329 pp remaining according to supply status page.
Is this problem likely to disappear when toner cartridge(s) are replaced?

Trying to burn disk but indexing never seems to move on , no green line

can anyone help here

vruff
You have not supplied enough information for us to help you with your specific assumed Premiere Elements issue.
Top of the list...what version of Premiere Elements are you using and on what computer operating system is it running?
Is this a "it worked before but not now" or "it never worked before" problem?
When are you seeing these indexing messages and where?
a. When you first import the media into the project and see this activity in the progress bar at the bottom left or right of the workspace?
What is the specific message - indexing, conforming of rendered files, conforming of audio files, or other?
or
b. When you are in the share area of the program and the burn to disc is in progress or other in this area?
c. Where are your source media stored?
Do you run into this problem when you are opening a project created in one version in a later a later version?
Details of the project(s) involved would help
a. properties of source media
b. project preset
c. definition of burn to disc - is that burn to DVD-VIDEO on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc?
Please review and consider and then we can decide what next.
Thank you.
ATR
Add On...in your details, please explain what you mean by no green line...when, where, and what are you doing?

My 27" iMac displays vertical green lines when turned on and then will not boot up

Can anyone tell me why my 27" iMac displays vertical green lines when it is turned on and then will not boot up?

Welcome to Apple Support Communities
The display or graphic card are damaged. The only thing you can do is to take your computer to an Apple Store or reseller to get your computer repaired.
If you use an external display with your Mac, connect it to your computer and see if these lines appear on the external display. If so, it's a graphic card problem

My MacPro 10.6.8 has a thin green line on the screen.

My MacPro is just over a year old now and I have a thin green line on the screen. I hooked it up to my TV and on the second window (the TV) the green line wasn't there. Whats the issue? How do I fix it?

From what you are saying, sounds like a line of pixels out on the display.
Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.
Have you tried connecting the display to another computer? If so, is the line still there?
What kind of display is it? Can you swap the data cable and try a different cable, could be a cable issue.
Any adapters in use? If so, try swapping those to rule them out as a problem.
Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.

How to remove dotted green lines in pages 5.2 documents?

How do i remove dotted green lines in Pages 5.2 documents?

That's right. Use Pages '09.
You can export to Pages '09 from Pages 5.2.
Peter

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. Help?

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.

I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.

Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

JPEG files are not layered files they are just image files so the green lines are a part of that file.
Usually cross lines are added to prevent anyone from using the file without proper rights, its a way of safeguarding the artwork.
You have to ask the owner of the file to remove the lines for you.
hope this helps
thanks

Dynex 32" Flat screen with green lines and audio problem

I bought thisDynex 32" flat screen in September and it has started to develop problems. It will be on and green lines start forming and go away. Then the sound goes in and out. The green lines come back and the sound works sparsely. I am wondering what is the issue. I have tried unconnected everything; leaving the power off for hours. Somedays it works great or sometimes out of the blue it just craps out but lately I am getting more bad days than good ones. Any help or suggestions would be great. All I got from Dynex was that I had to bring the TV back to BestBuy and have a master technician look at it....

Sounds like it needs servicing. If you bought it in September it should still be under the 1 yr manufacturer warranty. You can bring it into the store with your receipt and have customer service send it to service for you. It will be returned to the store and can be picked up when service is complete. I will say, however, warranty service can be lengthy. Expect to not have your TV for a few weeks.
If you like posts that I make, be sure to click on the star underneath my name. Thanks!

Why do I have a green line on edge of screen

New MacAir my pride and joy. I have only had it a few months from new and hardly used it. Now it has a green line running down the edge of the screen.
Is this a software problem or hardware problem?

Welcome to Apple Support Communities
That's a hardware issue, probably with your display. Unfortunately, the only thing you can do is to take your computer to an Apple Store or reseller to have it repaired. If the computer is in warranty, the repair will be free of charge

How do I avoid or get rid of thin green line bordering my video in Compressor?

Hello!
This is my work flow:
Edited an 18 minute 1920 x 1080 ProRes video on FCP 7, exported a master video file ProRes 422 self-contained QT movie, sent to Compressor (tried Best DVD 90-minutes and ProRes codec settings) to prepare files for a SD DVD in DVD Studio Pro.
My issue: I am getting a THIN GREEN LINE bordering my entire video on the Compressor file.
My master video file is perfect, no green line, however once it's gone through Compressor (tried both Best DVD 90 minutes and ProRes codec settings) the video has a thin green line that I can see in the DVD Studio Pro preview and simulation. The burned DVD also has it.
I would like to author the work in DVD Studio Pro as it is a looping video work for exhibition so I have the video file 6 times on the DVD rather than have it re-start at first track every time.
Seems like it has to do with downscaling the 1920 x 1080 video to SD for DVD.
Searched the web and there doesn't seem to be a clear explanation for it besides this discussion about 16s but doesn't clarify in regards to the problem downscaling to SD DVD.
Thanks so much to anyone with the magic answers!

>prepare files for a SD DVD in DVD Studio Pro.
My issue: I am getting a THIN GREEN LINE bordering my entire video on the Compressor file.
My master video file is perfect, no green line, however once it's gone through Compressor (tried both Best DVD 90 minutes and ProRes codec settings) the video has a thin green line that I can see in the DVD Studio Pro preview and simulation. The burned DVD also has it.
PAL - 1080 / 576 = 1,875
NTSC - 1080 / 480 = 2,25
DVDs are standard definition, so your original file has to be compressed to those pixel dimensions. As you can see above the number of HD horizontal lines don't divide by an even number into SD horizontal lines, so you get partial lines left over that the TV system doesn't really know how to interpret - that's the green bit.

How can I remove red and green lines from a footage?

I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

@Ann Benns
I will try to do that. Thank you!
@Bill Hunt
Well, the raw footage is an avi filmed with a handycam. This error occurred
the next day after I finished the editing in Adobe Premiere cs5. It might
be something wrong with the title graphics that I use, but still if there's
a solution I would like to find it out as this error occurred before.
Cristina

Msi 7950 green lines

Similar Messages

Maybe you are looking for