MSI 7970 Lightning...display problems
I just got today the Lightning 7970. I have tried two of the displayports and they work, but when I switch to one of the other two displayports...the computer doesn't even post. So to recap...of the 4 displayports, 2 do fine and 2 don't even post on reboot.
Is it that you only get two of the 4 displayports for booting...and the other 2 are used when in windows?
My computer is running
Windows 8 64bit
Latest 12.11 drivers
6gb of ram
I7 920 intel cpu
not sure, can you check if they will work within windows?
Similar Messages
-
Hello,
yesterday I received my MSI Ligthning, mounted it into my PC, boot and everything was fine...
I did some runs of Unigine Valley Benchmark, 3DMark Fire Strike benchmark, played a little bit to check if everything is fine and yes everything was fine...(by the way no more than 60c heat for the GPU).
But
after 2 hours, I was using Internet Explorer and suddenly my PC crashed with a kind of weird green screen... it was not possible to do anything, I had to reboot.
Unfortunately when I rebooted I saw some weird red dots in the displayed texts during the boot process... so I went into my mobo bios screen and saw here several red dotted lines accross the screen..
Anyway I tried to boot Windows with no success: after the splash screen I was not able to get the login screen... only a black screen...
I tried to dismount and mount again the card with no success.
I have the feeling my card is dead
By the way I tried to boot using the LN2 bios with no success (3 beeps).
My system is:
PSU Seasonic X650 (54amp +12v rail)
Mobo Asus P7P55D-E PRO
CPU i7 860 - 3.6GHz
8GB DDR3 GSkill
Windows 7 - x64
Crucial SSD M4 - 256GB
Raid 0 Seagate HDD 7200.14 - 3TB
Thanks if you have any idea to suggest before I RMA my card
Note: I put back my previous graphic cards and everything is fine... so no problem with the mobo or something else I guess.test the card in another PC
-
MSI 7970 Lightning GHz Edition, black screen problem
Hi all,
I am very dissapointed on the MSI product now. I bought MSI 7970 Lightning BE GHz Edition, when I don't overclock the graphics card and play games I will get black screen or sometime I will get message that "AMD graphics card stopped responding". So I bought a 950W PSU but still problem is there. If I underclocked the card at 600MHz both GPU and memory clock I don't get the problem. But what's the point of having this card paid $500 for nothing. I am so fed up with this card. Please someone help....
My System Spc :
Asus P8Z77-V LX motherboard
16GB RAM
Core i7 3770
PC Power and cooling MKII 950W PSU
Thanks.watch the attitude! you have got a faulty card it happens occasionally as all manufacturers have a 1-3% defective rate not just MSI so do not start with your bashing as its against the rules here!
there are hundreds of individual parts on a board and any one can go bad causing a problem so if you are going to bash anyone bash AMD's GPU's as that is the most likely problem here on the card and MSI do not make those so keep your "I learned a lesson about MSI... it's a piece of junk" to yourself !
>>Please read and comply with the Forum Rules.<< -
Msi 7970 Lightning - Latest Bios
Hello,
What is the latest version of bios for my Msi R7970 Lightning?
CPU: Intel Core I7 3770K
MOTHERBOARD: Asus Sabertooth Z77
RAM:Gskill Sniper 1866MHZ DC 8GB
HD: SSD 120GB OCZ Agility + 2TB WD-20EARX Sata 3
GPU:MSI 7970 Lightning
PSU: Corsair HX750
SN: 602-v278-028b1205102982
I have several problems with BF3- DX error (DirectX function "GetDeviceRemovedReason" failed with DXGI_ERROR_DEVICE_HUNG: Device hung due to badly formed commands...)
Cheers
GROKQuote from: Svet on 28-June-13, 16:40:43
save and upload your current vbios to check it
Hello Svet,
My bios
http://www.teamanotherview.com/downloads/msi_7970_Tahiti.rom
Ty,
Cheers
GROK -
Msi 7970 lightning flashing help.
Hello guys, my friend has a very strange problem.
He bought a msi 7970 lightning, but he can not change anything in msi afterburner, so no extra vcore, no higher power limiter.
if he runs a benchmark like firestrik or 3d 11, it says its a 7950
on 1 bios, the ln2 it runs on 1150, on the other 1 it runs at 1050 he has the shaders of a 7950, but it is the 7970 lightning.
no he whants to flash it, but what are the exact commands to use when he is in dos.
please do not say return it to the shop, because it takes 8 weeks to get a card back, and the shop says oke flash it, but HOWQuote from: flobelix on 17-March-14, 02:24:40
Use the attached
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
TV278MH.170 is normal vbios and TV278MH.180 is LN2.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (170_180.rar) and put the included file (TV278MH.170 or TV278MH.180) on that stick.
Rename TV278MH.170 / TV278MH.180 to 170.rom / 180.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 170.rom (or 180.rom) [ENTER] and let it flash the vbios.
If still no help remove current drivers in safemode using >>Driver Fusion<< and install latest AMD drivers after reboot.
oke we tried it, we used the 180, now the core clock says 1050 no succes -
Msi 7970 lightning BE artifacts & weird stuff
Hi,
I'm having a lot of trouble with my msi 7970 lightning. Since a few months ago it started showing weird artifacts. I've mede a few video but ''I'm not allowed to post external links'', or at least so say the board.
The card it's stock speed (core and memory), the fans profile it's also at stock. I'm using the last Omega 14.12 driver and I've tried all the amd drivers from the last year. My cpu is an i7 3770 and my pc has 8 gb of ram.
The card serial number is:
S/N: 602-V278-040B1306042942
Now cames the pain. I had to stop playing Diablo 3 bacause some weird artifacts, then I quit playing Guild Wars 2 for the same reason (see the first video) and now I had to stop playing Dragon Age Origin because of the artifacts, which comes out at high to ultra setting (manageable by the card), and because the game keep crashing randomly to desktop (directX Error) or even freezing (Application Hang, ID 1001 Error). I have seen also weird artifacts on Watch Dogs and Battlefield 3 but fortunately I didn't like those game so much...
What should I do? I have even tried a clean win 8.1 installation...I'm really discouraged.
This card has still six more month of warranty, should I return to the shop?
Thanks in advance,
rozUPDATE:
B2 error solved. I tried the second bios on my msi z77 mpower motherboard and it wasn't update to the last release, so it was incompatible with amd 7970 card. Now I've update it the video card regularly boot.
Reading online i found that a possible explanation of the artifacts on 7970 cards is due to Hynix GDDR5 video memory ( H5GQ2H24MFR-R0C) voltages which are pushed too by manufacturers. So some people solved the issue reducing the memory voltages (see youtube) and clock speed.
Msi kept them under hynix scpecification, that's to say 6000 Mhz at 1.6 mV, maybe could be a defective module. I mean this card was build for overcloking so it seems weird to see these artifacts when the card is in full load and reaches 75-80 °C. In fact I've no issue, at least for now, with Crysis 3 at high details because the card never hit 70 °C. -
I just got my self MSI 7970 Lightning but it looks like the card is defective im getting this
once a day on my main monitor i tryed several driver versions, switching to different monitors etc. but nothing works i still get this "crash", my rig is still running and secondary monitor is working fine but to fix this i have to restart my computer. Does anyone have any ideas besides returning the card.what PSU you use?
provide full system specifications, read >>Posting Guide<<
also tell S/N of the card and save and upload his current vbios that's installed. -
7970 lightning - displayport problem
I am attempting to hook the 7970 Lightning up to three NEC ex231w displays, with two mini DP to DP cables and one DP to DP cable with a mini DP adapter. When I use just Displayport cables, I get no picture on any of the displays. I am assuming Windows is booting (though I'm not sure), but I get something like "displayport not detected" on all three displays and then no picture.
However, when I use a DVI cable as one of the connections (along with two DP connections), I am able to get into Windows as usual, including setting up Eyefinity.
Is there something I need to enable in order to be able to use just Displayport connections?
Other details:
Windows 7 Home Premium 64bit
AMD 12.3 CCC drivers
MSI 990fxa-gd65 (bios v19.5b4 from 11/28/2011)Quote from: SegaStep on 09-July-13, 14:30:36
@Svet .. Im going to be able to test it with http://www.raidmax.com/psu/rx_1200ae.html over the weekend .. And if it does work without problems with that .. Would you recommend i get one of those ? brandwise ? i know its no corsair name brand or other .. but this is in my price range ..
also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
Quote from: SegaStep on 09-July-13, 14:30:36
@Svet .. Im going to be able to test it with http://www.raidmax.com/psu/rx_1200ae.html over the weekend .. And if it does work without problems with that .. Would you recommend i get one of those ? brandwise ? i know its no corsair name brand or other .. but this is in my price range ..
i would stick to trusted and quality PSU
for the price of this PSU: also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
you can get corsair one http://www.newegg.com/Product/Product.aspx?Item=N82E16817139022&Tpk=corsair%20PSU%20850&IsVirtualParent=1
Quote
also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
nope, im attaching latest version with gop support -
MSI 648 Max - Display Problems
I recently bought the MSI 648 Max motherboard, as my system needed an upgrade quite badly. To cut the costs down a bit, I’ve used some parts from my previous system (eg the video card which is an 2x AGP, 64 Mb, Kyro based card) but got new RAM, CPU and psu.
I put together the system (described below), loaded Windows ME, updated all drivers with latest releases, and the thing works but the quality of the display is really bad ;( . That is, I get lots of video artefacts (shadows, fading text, vertical lines, distorted colours, etc). The video card was working fine on my other machine. Also, Sisoft Sandra says that the card is operating at 2x AGP, as it should.
I am not overclocking; some of the BIOS parameters I used are as follows (based on the OPTIMAL DEFAULTS):
AGP Aperture Size 128 Mb
DRAM CAS Latency by SPD
Timing Setting Mode NORMAL
MA 1T/2T Select AUTO
Primary Graphics Adapter AGP
Allocate IRQ to PCI VGA NO
CPU/DRAM Frequency Ratio by SPD
DRAM Frequency 167 MHz (for now)
CPU Frequency 133 MHz
AGP/PCI Frequency 66/33
DRAM Vcore 2.6 V
CPU Vcore AUTO
The system temperature showed in the Health Status is less than 40 C (104 F).
I have tried the latest AMI BIOS (version 1.3), and then reverted to version 1.0, but I still have the same display problem.
I would really appreciate some help.
Ciao
mystro
========================================
Windows ME (v4.90.3000)
Pentium4 CPU 2.4 GHz (133x18.0), FSB 533 MHz
MSI SIS648 Max (MS 6585) ver. 1.0
2 x 256 MB Corsair DDR400 (CMX256A-3200C2, CL = 2-3-3-6-T1,
Hercules 3D Prophet Kyro 4500 TV Out (Kyro I not II) 64 Mb, AGP 2x, 175/175 MHz
IBM 40GB 7200RPM UATA100
Mitsubishi 40x CD-Rom
Yamaha 8424S CD-RW
Adaptec 2930U SCSI card
Eagle 350W psu, 190W (combined 3.3V & 5V)boards agpx4 and 8 only so i dont advise using that card
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585 -
So i may have celebrated a little to early hmm ..
I just received my 7970 Lightning BE .. PC turns on fine, can play video, ran a few bench marks ( sometimes ) .. but with a bench like fur mark, pc just shuts itself off .. I started with one power cable thats splits into two 8pins .. thought maybe there is 2 much for the one port on the psu to handle .. then tried 2 separate cables each coming from their own port .. pc still shuts down with to much stress .. i have also tried both bio's on the gpu .. I am either guessing its a problem with the card, or with the psu, though the psu did work perfectly with a 6870 .. Hoping someone can help ..
https://www.dropbox.com/s/gs291rq9d8ncefx/bios%27s%20BE.rom .. Thats the current bio's if that helps .. maybe it needs an update ?
I have also uninstalled/reinstalled all software like catalyst/afterburner .
Any insight/thought as to whats causing the PC to shutdown would be delightful .. i checked to see if the motherboard posts an error code unfortunately it doesnt.
This here is the PSU i have http://www.hardwaresecrets.com/article/Huntkey-X7-900-W-Power-Supply-Review/1446
Rest of the specs are in sig ( besides the 6870 havnt changed yet )
Many thanksQuote from: SegaStep on 09-July-13, 14:30:36
@Svet .. Im going to be able to test it with http://www.raidmax.com/psu/rx_1200ae.html over the weekend .. And if it does work without problems with that .. Would you recommend i get one of those ? brandwise ? i know its no corsair name brand or other .. but this is in my price range ..
also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
Quote from: SegaStep on 09-July-13, 14:30:36
@Svet .. Im going to be able to test it with http://www.raidmax.com/psu/rx_1200ae.html over the weekend .. And if it does work without problems with that .. Would you recommend i get one of those ? brandwise ? i know its no corsair name brand or other .. but this is in my price range ..
i would stick to trusted and quality PSU
for the price of this PSU: also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
you can get corsair one http://www.newegg.com/Product/Product.aspx?Item=N82E16817139022&Tpk=corsair%20PSU%20850&IsVirtualParent=1
Quote
also, on side note just out of interest @svet .. that bio's i linked was it upto date ?
nope, im attaching latest version with gop support -
HD 7970 Lightning BE - problem.
I've got HD 7970 Lightning Boosted Edition. After 1-2hour's of gaming the GPU shutdown the screen and it's black. The sound is still played and i can talk with friends over teamspeak. It happens almost on every game. The GPU temps are around ~65. How can i RMA it when facture is posted and i cant dig to it?
Quote
I've got HD 7970 Lightning Boosted Edition. After 1-2hour's of gaming the GPU shutdown the screen and it's black. The sound is still played and i can talk with friends over teamspeak. It happens almost on every game.
Follow >>Posting Guide<< to help us to help you
Quote
How can i RMA it when facture is posted and i cant dig to it?
What? When what happens? -
MSI 580GTX Lightning XE Problems
I have had my card since before Christmas 2011 and have just started noticing problems. While i was running MSI Kombuster i noticed that at stock speeds that my card is 'GPU Throttling'. i have never noticed this before, but it seems to start happening as soon as Kombuster is started. I there an update i have missed or is this normal?
Thanks
BrettQuote from: Svet on 18-June-12, 20:53:19
No it will not, it will void warranty only if you broke something during procedure.
And who's to say I wouldn't accidentally break something? What kind of grease would you put on? I have some Arctic Cooling MX-2 available.
Quote
It's not bios problem, i've able to test the same card with the same VBIOS , and there was no any problems.
Also you said it worked fine before
How can it be my card, when 'JohnZS' has the same card, has the same potential problem?
Could it be due to my own personal system?
Enermax Revolution85+ SLI 1050W
Gigabyte X58A-UD5
Intel i7 920 @ 4.0GHz
Corsair H50 with 1xNB M12-P
6GB OCZ Reaper PC3-16000 @ 1528 MHz 7-7-7-20
MSI GTX 580 3GB Lightning XE OC
Asus Xonar HDAV 1.3 Deluxe
OCZ Vertex 2 120GB SSD, Seagate Momentus XT 500GB Hybrid, Western Digital 300GB Green Caviar HDD, Samsung STORY USB 3.0 1.5TB External Drive
Windows 7 Ultimate 64-bit
These are all my bios setting aswell -
MSI FX5600 VTDR128 Display Problem
I've just built a new PC using components listed below. When I switch the PC on the display comes up with coloured vertical lines every time. I believe its the graphics card. It checks the drives ok and beeps once then continues to boot up. I stuck a Win XP disc in the DVD drive and it started to boot. It even copied files to the hard drive so the rest of the PC must be working. Anyone got any suggestions.
Asus P4P800
P4 2.6GHz
512Mb
MSI FX5600 VTDR128
Audigy 2 Soundcard
Pioneer DVD Writer
Maxtor 120Gb Drive
Michael.Ordered it from simply.co.uk. Phoned them yesterday and their arranging to collect and send out a new. Still waiting for the courier though.
Borrowed a Matrox PCI card from work. Fitted it last night and up pops the ASUS splash screen. PC booted fine into Linux drive I had in their for testing. Just waiting for the new card now. All I've got to find out next is whether the software activation in XP is clever enough to see the hardware has changed. I'd like to keep my old PC.
Thanks for your comments.
Michael. -
MSI 9800 PRO Display problems on my TV
Hi. i use MSI 9800 PRO R360. when i want to watch my desktop on both my MOnitör and Tv There is only seems my desktop scene. when i put the icons on right part on monitör with mouse , icons seems on Tv From left. and icons seems only on Tv now not on monitor... i hope you understood me.what is the problem?
Check if you are "extending" or "cloning" your video, probably the first one (gives you extra deskto space, instead of a replica of your monitor on tv.)
A question: My tv output sucks, it's too dark, and I have no brightness controls in my control panel (for the tv). ¿any workarounds? -
MOVED: msi 7970 lightning BE artifacts & weird stuff
This topic has been moved to Graphics Cards.
https://forum-en.msi.com/index.php?topic=254585.0UPDATE:
B2 error solved. I tried the second bios on my msi z77 mpower motherboard and it wasn't update to the last release, so it was incompatible with amd 7970 card. Now I've update it the video card regularly boot.
Reading online i found that a possible explanation of the artifacts on 7970 cards is due to Hynix GDDR5 video memory ( H5GQ2H24MFR-R0C) voltages which are pushed too by manufacturers. So some people solved the issue reducing the memory voltages (see youtube) and clock speed.
Msi kept them under hynix scpecification, that's to say 6000 Mhz at 1.6 mV, maybe could be a defective module. I mean this card was build for overcloking so it seems weird to see these artifacts when the card is in full load and reaches 75-80 °C. In fact I've no issue, at least for now, with Crysis 3 at high details because the card never hit 70 °C.
Maybe you are looking for
-
Why can't I copy and paste from word into websites?
Hi, I have been accepted as a writer for 3 online publishers, but cannot copy and paste examples of my work from Word into their websites. The clipboard behaviour seems erratic - sometimes I can copy text from websites and paste into Word, sometimes
-
What are the AM Tuning parameters need to be set for 500 concurrent users
Hi All, We are using JDEVADF_11.1.1.5.0. What are the exact AM parameters(Pooling and Scalability tab) to be set when we planned for 500+ concurrent users? Along with this do we need to set any parameters at weblogic server level, if any please give
-
SQL performance difference in application an in SQL Server
We are using Visual Studio 2010 and SQL Server 2012. We insert into the database using the stored procedure InsertData. When I timed in the program how long it takes to execute stored procedure InsertData, it takes more than 10 ms per insert. But, ou
-
Lightroom Mobile not synching when in Lock Screen
LR mobile syncs with my LR collections, no problem. BUT: For the pictures to sync, I need to unlock my iPad and keep it unlocked and screen turned on, otherwise the sync will stop. Can't it just run in the background? When synching a large collection
-
Hello, How can i find out, if I am allowed to buy Photoshop CS6 Extended Student with my University? I go to the DHBW in Mosbach (Germany), and I am studiing engineering. Can somebody say me am I allowed?