MSI 7970 Lightning GHz Edition, black screen problem

Hi all,
I am very dissapointed on the MSI product now. I bought MSI 7970 Lightning BE GHz Edition, when I don't overclock the graphics card and play games I will get black screen or sometime I will get message that "AMD graphics card stopped responding". So I bought a 950W PSU but still problem is there. If I underclocked the card at 600MHz both GPU and memory clock I don't get the problem. But what's the point of having this card paid $500 for nothing. I am so fed up with this card. Please someone help....
My System Spc :
Asus P8Z77-V LX motherboard
16GB RAM
Core i7 3770
PC Power and cooling MKII 950W PSU
Thanks.

watch the attitude! you have got a faulty card it happens occasionally as all manufacturers have a 1-3% defective rate not just MSI so do not start with your bashing as its against the rules here!
there are hundreds of individual parts on a board and any one can go bad causing a problem so if you are going to bash anyone bash AMD's GPU's as that is the most likely problem here on the card and MSI do not make those so keep your "I learned a lesson about MSI... it's a piece of junk" to yourself !
>>Please read and comply with the Forum Rules.<<

Similar Messages

MSI N580GTX Lightning Extreme Edition (Black Screen / Reboot)

Hi everyone !
Here's my computer specs :
CPU: Intel I7 870 (2.93 Ghz)
MoBo: Micro ATX from my Dell XPS Studio 8000
Memory: 6Go DDR 667 Mhz
PSU: Corsair HX750(w)
Windows 7 Pro 64 Bits
My problem :
80% of my games (Crysis 1 & 2, Bulletstorm,...) & benchs (3DMark 11, MSI Kombustor, ...) crashes after few seconds. My graphic card goes off, black screen, and then my computer automatically reboot. I've tried another PSU, same pb, and my Corsair HX750 is new. So I wonder if the problem is from my graphics card or my (dell) motherboard ? But my config has the minimum required by MSI.
My temporary solution
After few tests with differents drivers, I've try to change the Core Voltage, no result... So I decided to downclock the GPU freqs.
In order to have something stable to 100%, and be able to run all the games and benchs, i've to downclock the GPU like :
Core Clock : 600 Mhz (Original : 772 Mhz)
Shader Clock : 1200 Mhz (Original : 1544 Mhz)
Memory Clock : 1730 Mhz (Original : 2004 Mhz)
Its a big loss frequency!
Hope a new bios will come out to fix the bug.

Quote
Display driver : ForceWare 280.26
have you tried MSI's drivers for your card?
==> http://www.msi.com/product/vga/N580GTX-Lightning-Xtreme-Edition.html#/?div=Driver&os=All
Remove current driver with >>Driver Sweeper<< in 'Safe Mode' before install the new one
Quote from: Frakatchoo on 07-September-11, 22:13:04
It's only unstable when i'm use the GPU (Games & benchs), not HD videos.
Most games/bench crashes with default clock @ 1.031v. I tried to overvolted & undervolted the GPU, but my tests were not conclusive. The only way i've found to have all games/benchs stable is to downclock the GPU as I explained in my first post.
Maybe i need a more accurate GPU voltage ? Is it important to change Memory & Aux voltage too ?
have you tested with 1050mV for core?
Quote
Is it important to change Memory & Aux voltage too ?
normally not, but depend what exactly is unstable
But it should work fine by default as is

MSI 290X LE Lightning Edition black screen problem

I recently bought the above graphics card, only to run into problems with black screen, furmark blackscreens when it reaches just over 70c & games that push the card ie Crysis 3 also causes black screen problems, I'm also sometimes getting desktop corruptions, usually after it black screened.
My PSU is a 850watt EVGA SuperNova G2 so i know it's not that what causing the problem.
rest of my setup as follows
3770K @4.2Ghz
MSI Z77 Mpower
8GB corsair memory
ect ect.
Any idea's as to the cause of the problem?
edit here what it doing I've uploaded it to youtube.

First of all remove any oc. Then list specs more detailed: >>Posting Guide<<

IPhoto Edit - Black screen problems persist into V11

I have just purchased iPhoto 11 , Version 9.4.3, and everythign appears to be ok - except when you try to edit a photo. All I get is the Black Screen.
This problem has been around since at leat 2006 as far as I can see. And still NO SOLUTION. Now come on Apple. I thought you prided yourself on being Customer driven? That's pretty poor by anyone's standards.
None of the so called "fixes" that litter the forums seem to work. It's not a corrupted library in my case. I have only one photo in it right now. I can see the photo at any time, except in Edit mode.
Is it likely that this problem will be fixed any time soon, or have I just thrown away more money? sigh....

What's the source of the image? What colour profile?
BTW: You're not taling to Apple here, just other users.
iPhoto menu -> Provide iPhoto Feedback is the route to them.

MSI R9 270x OC edition black screen

Hi all I've had the r9 270x for 3 months now and it ran like a champ. I ran Sims 4 the day it came out and worked for what seemed 30 mins and I come across a black screen.
Boots up fine but at login screen I get the same black screen. I've gone as far as formatting my computer several times.
I had it in PCI express 3.0 x16/x8 slot 1
Here are my specs.
Mobo: Asus ROG Maximus V Extreme
PSU: Antec HCG-900
GPU: MSI Radeon r9 270x OC edition
CPU: i7 3770k
RAM: Corsair Vengeance 8gb x2
Any type of help would be appreciated :(

Does the computer work with the integrated GPU? Have you tested the vga in another machine or can you?

Saphire hd 7770 ghz edition black screen on boot (bios in PEG)

when i start my PC i got a black screen (the fan of the gpu are working ) and when i go in bios and change PEG for IGD everything work ,no black screen ,i can see my hd 7770 in device manager BUT i'm on the integrated graphic not on my hd 7770 ,please help!!!!!
PC spec:
h77ma g43 (mobo)
amd hd 7770 (Gpu)
intel pentium g2120 3.1ghz (cpu)
4gb corsair vengeance (ram)
windows 7 ultimate 32 bits

ok ,il try with an other graphic card cause i don't have an other desktop (i've already update to the last driver )
thanks for you'r fast answer !

Need help overclock the MSI N580GTX Lightning Xtreme Edition !

I want to overclock this card MSI N580GTX Lightning Xtreme Edition (MSI N580GTX Lightning Xtreme Edition GeForce GTX 580 (Fermi) 3072 MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card), but I don't know how far I can get. Can you help me overclock this to get a maximum performing? and how can I do that? can you guide me?
what is temperature should be consider over heat and might damage card?
After overclock, can I keep that always in 3-5 days without shutdown computer?
Here is default Corelock 832, Shaderlock: 1664, memory clock 2100
Also, when I click the "K" to show MSI Kombustor: I see Core: 416, and GPU Throttling -416Mhz. What is happening? is that graphic card has problem? it doesn't run fully 832mhz.
Here is information of my computer:
Motherboard   Asus Maximus IV Extreme-Z
Processor   Intel Core i7 2600K
Memory   Corsair Dominator Platinum 32GB (4x8GB) DDR3 1866 MHz (PC3 15000)
Video Card # 1   MSI N580GTX Lightning Xtreme Edition GeForce GTX 580 3072 MB
Hard Drive # 1   Corsair Force Series GT 120 GB
Hard Drive # 2   Western Digital Caviar Black 1 TB
Power Supply   Corsair HX1050W
Case   Corsair Graphite Series 600T
Monitor   Acer HN274H BMIIID 3D 27-Inch LED Monitor - Black
Operating System   Windows 7 Utimate (64 bit)

Quote from: flobelix on 02-December-12, 01:03:03
Playing aan entire level of Crysis or Crysis2 with extreme settings is a very sure way to test. A multiplayer round of BF3 at max settings is also a good test.
If you got the max stable clockrates without overvolting and temps are fine. Go on adding voltage in small steps and agin try the highest max clockrate of any voltage step. That way you'll find the total max clockrate. At some point adding voltage will have no effect anymore and that is the highest clockrate. Remember that voltage unlike just higher clockrates will increase the temps massively.
Agreed with flobelix
Crysis 2 with ultra setting and set Vsync to Disabled is a very hard test in real life application, I don't use furmark or kombustor. To test stability first I run Vantage and 3DMark2011 then playing Crysis 2 about 2 - 3 hours every day for aweek or 2 weeks and if pass then I call it stable
I use GTX580 Lightning and at stock volt I can do 920/2200 with all little DIP switches turned ON/Enabled/Unlocked excluding Xtreme cooling LN2 DIP switch since I use normal air cooling and not LN2. If I let all DIP switches to their stock/OFF even at 900MHz I can't pass Vantage.
For safe daily OC better stay under 80c for your core temp and under 70c for your VRM & Memory temp also do not use beyond +200mv for your core voltage (+200mv is the max value)
Note : For 24/7 I use 980/2300 with +112mv/+40mv. VRM and memory temp are under 60c and Core temp is under 80c.

R7870 TF III 2GB OC edition Black Screen while gaming (Guild Wars 2)

Hello there mate,
1st time post for me,
i'm from Indonesia, and i just got my r7870 recently
and i'm using it now for playing Guild Wars 2.
1st i'm using the "auto detect" mode in Guild Wars 2
where give me "high" setting for the graphic
but after a few minutes i got a black screen.....
that force me to shut down my system by press and hold the power button,
then i try with "low" setting for the graphic (in Guild Wars2)
but still got the black screen after another few minute..
and i'm using CCC ver. 12.8
i have been search and found some post with similar issue with this (black screen while gaming with r7870)
what can i do to solve this prob ?
Note : before using r7870, i used r4870 1GB, and have no problem playing Guild Wars 2 (in low setting)
here is my rig :
Main Board : MSI - Z68MA - G45
CPU : I3 - 2120
RAM : 2x4GB GSkill
PSU : 650 Watt Seasonic
HHD : 2x 500gb Seagate
Graph Card : MSI - r7870 TF3 OC edition
sorry for my bad English, hope you all still can understand.

Quote from: Svet on 08-September-12, 07:20:56
have you tried msi vga drivers for your card?
do you have such issues elsewhere?
well i haven't tried using the drive that come within the bundle yet
but as i mentioned before, i did not have any problem playing GW2 and other games
with my previous card (4870) and using exactly the same rig,
so i don't think the problem lies elsewhere,
but i think ill try msi vga driver that i got in the cd 1st,
thanks for your suggestion, ill report again the result later.
tried the msi vga drive (ver. 8.95) that come within the budle
and well... still got the black screen problem.. (tested with guild wars 2)

Msi 7970 Lightning - Latest Bios

Hello,
What is the latest version of bios for my Msi R7970 Lightning?
CPU: Intel Core I7 3770K
MOTHERBOARD: Asus Sabertooth Z77
RAM:Gskill Sniper 1866MHZ DC 8GB
HD: SSD 120GB OCZ Agility + 2TB WD-20EARX Sata 3
GPU:MSI 7970 Lightning
PSU: Corsair HX750
SN: 602-v278-028b1205102982
I have several problems with BF3- DX error (DirectX function "GetDeviceRemovedReason" failed with DXGI_ERROR_DEVICE_HUNG: Device hung due to badly formed commands...)
Cheers
GROK

Quote from: Svet on 28-June-13, 16:40:43
save and upload your current vbios to check it
Hello Svet,
My bios
http://www.teamanotherview.com/downloads/msi_7970_Tahiti.rom
Ty,
Cheers
GROK

[REQUEST]UEFI BIOS GOP MSI R7970 Lightning Boost Edition

as the title i've request, i need the normal and ln2 gop bios for 7970 lightning boost edition.
my serial number :
602-V278-040B1305003271
after i submited my vbios with gpuz repository, the message shown that my vbios same like link below:
htt://www.techpowerup.com/vgabios/142887/msi-hd7970-3072-130104.html
but if you need real the original bios from my gpuz, here's the link for the normal bios:
htt://www.4shared.com/file/OexiAoWxce/My_Original_normal_bios.html
and for the original LN2 bios:
htt://www.4shared.com/file/zBenPyH7ce/My_Original_LN2_bios.html
sorry if my english very bad

You can use both. I'd prefer flashing in dos without Windows being able to interfere:
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (170_180.rar) and put the included file (TV278MH.170 or TV278MH.180) on that stick.
Rename TV278MH.170 / TV278MH.180 to 170.rom / 180.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 170.rom (or 180.rom) [ENTER] and let it flash the vbios.

Revamp!!! MSI N580GTX Lightning Extreme Edition VC

MSI N580GTX Lightning Extreme Edition is a reconstructed N580GTX Lightning but with 3GB DDR5 memory and redesigned Twin FrozrIII cooler (propeller blade fan’s color changes from blue to white if the card gets hot and the fan rotates backwards for 30 seconds each time the computer starts to remove dusts on the fan). The card still has the enhanced voltage controls and power circuitry where the Lightning series stands out. Compared from a regular 580GTX power phase, the EX has 16+1 (12 for the GPU Core, 3 for the memory and 1 for the PLL/VDDC Power).
At the back area of the card, you will find useful switches for unlocking the Memory, GPU, PLL voltages / Over Current Protection Power Unlocker/ PWM Clock Tuner / and LN2 Bios switch for Cold Bug Fix.
Below are more in-depth specs of the Lightning EX:
• Pre-overclocked GPU Core is running at 832 MHz
• 3072MB GDDR5 4200MHz Memory
• Video Output Functions – 2x Dual-Link DVI, 1x HDMI and 1x Display Port
• Compose of Military Class 2 Components for longer lifespan and better overclocking ability (Solid Capacitors, Super Ferrite Chokes, Hi-C Caps, Lightning Power PCB Layer, Copper MOS and Proadilizer)
• Capable of Two-Way or 3-Way SLI Configuration
Black colored underneath plate which serves as heatsink for memory and VRM chips. It also acts as support or brace for long video cards so that it won’t slant down once installed.
Accessories included with the VC Package:
•Two SLI Bridges for multi GPU configuration
•2x 6pin Power to 8pin PCIE Power Connector
•DVI to VGA Connector
•Software & Utility DVD
•Manual and Quick Guide
•V-Check Points Connector
Lightning EX at stock speed for all the tests. The only component that I overclocked was the 2600K processor to determine bottlenecks. PhysX was also disabled so that equal comparison can be made against an AMD ATI VC model.
Test System Configuration:
•Processor: 2600K with Fenrir Heatsink Fan
•Motherboard: Z68A-GD80
•Memory: Kingston 2x2GB DDR3 2133MHz
•Harddrive: Kingston SSD VNow+ 128GB
•PSU: Antec TPQ-1200
3dmark06 Result: 24777
Vantage Result: 25614
3dmark11 Result: 6535
Next with the 2600K overclocked at 5.1GHz. Video Card performance did increased. This shows that you have to run your 2600k at least at 4.5 – 4.8GHz to cope up with the Lightning EX’s Power.
3dmark06 2nd Result: 35384
Vantage 2nd Result: 28741
3dmark11 2nd Result: 6815
N580GTX Lightning is such a powerful card that even at stock settings, power performance is enough to play all latest games in high resolution with extreme detail settings. Then if the power is still enough for you, you could still use the MSI Afterburner Software to juice out more from the video card or configure it in SLI.

Quote
Display driver : ForceWare 280.26
have you tried MSI's drivers for your card?
==> http://www.msi.com/product/vga/N580GTX-Lightning-Xtreme-Edition.html#/?div=Driver&os=All
Remove current driver with >>Driver Sweeper<< in 'Safe Mode' before install the new one
Quote from: Frakatchoo on 07-September-11, 22:13:04
It's only unstable when i'm use the GPU (Games & benchs), not HD videos.
Most games/bench crashes with default clock @ 1.031v. I tried to overvolted & undervolted the GPU, but my tests were not conclusive. The only way i've found to have all games/benchs stable is to downclock the GPU as I explained in my first post.
Maybe i need a more accurate GPU voltage ? Is it important to change Memory & Aux voltage too ?
have you tested with 1050mV for core?
Quote
Is it important to change Memory & Aux voltage too ?
normally not, but depend what exactly is unstable
But it should work fine by default as is

Msi 7970 lightning flashing help.

Hello guys, my friend has a very strange problem.
He bought a msi 7970 lightning, but he can not change anything in msi afterburner, so no extra vcore, no higher power limiter.
if he runs a benchmark like firestrik or 3d 11, it says its a 7950
on 1 bios, the ln2 it runs on 1150, on the other 1 it runs at 1050 he has the shaders of a 7950, but it is the 7970 lightning.
no he whants to flash it, but what are the exact commands to use when he is in dos.
please do not say return it to the shop, because it takes 8 weeks to get a card back, and the shop says oke flash it, but HOW

Quote from: flobelix on 17-March-14, 02:24:40
Use the attached
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
TV278MH.170 is normal vbios and TV278MH.180 is LN2.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (170_180.rar) and put the included file (TV278MH.170 or TV278MH.180) on that stick.
Rename TV278MH.170 / TV278MH.180 to 170.rom / 180.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 170.rom (or 180.rom) [ENTER] and let it flash the vbios.
If still no help remove current drivers in safemode using >>Driver Fusion<< and install latest AMD drivers after reboot.
oke we tried it, we used the 180, now the core clock says 1050 no succes

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

without more information, I assume you mean a blackout from sleep issue.
Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
AND ...
unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
test it and check back

Fifa 12 airplay via appletv, black screen problem

FIFA12 Appletv airplay black screen problem.
Hello, i wanted to play fifa 12 iOS with tv via airplay. But it dint work, i see game picture for half second then tv goes black screen. Audio still working and game i can go to play, but i cant see the game picture. This is very sad because every other game works with tv via airplay. The only game which would be really great with airplay doesnt work :( We tested it with two different tv and two different iPad 3's. And the tv is 40" the other one was much smaller and apple tv is the newest one with newest software.
Has someone else had this problem? is the apple tv problem or maybe fifa 12 have bug or something? i hope we can get this working, iv seen fifa 12 via airplay working very nice in few youtube videos so why it doesnt work for us.
also where would be best place to contact fifa12 makers for this problem.
Sorry for my bad english, it's not my national language.

EA sent me the following anwser:
Please try any the following that you have not tried as of yet:
- Exit the game, then turn off and reset your device. Then try starting the game again.
- Ensure you are running the most current version of the game (check to see if there is an update available for the game through iTunes).
- Access the iTunes Store within your device and download the game again. It may prompt you to 'Buy' the game, but once you click it, it should allow you to download for free since you already paid for it through iTunes. Please note that we at EA have no access to your iTunes account. If you have any disputes, please contact iTunes (Apple) directly.
- Make sure your device has the latest software:
1. Download the latest version of iTunes from http://www.apple.com/itunes
Note: If you already have iTunes installed, open it and select Help > Check for Updates. Then install any available updates.
2. Connect your device to your computer with the USB cable, select your device in iTunes, and click the 'Update' button or 'Check for Update' button. Install the software update if available.

MSI 7970 Lightning GHz Edition, black screen problem

Similar Messages

Maybe you are looking for