MSI 845 Ultra

I have MSI 845 Ultra mainboard with ATA 133 raid, but I can´t change Raid options from Raid setup (ctrl-f). Only available option is Performance (striping), but i need security (mirroring) option.  ?(  ?(  ?(

in RAID there is 2*80 gb set as master
as system disk is 40 gb as master and 80 as slave
what i want is to mirror 40 to 80... originally it was supposed to have 80 as a system disk but there was "difficulties" to set w2k.srv to 80 gb disk. No problems with 40..... mysterious machine )

Similar Messages

  • Help needed pls!!! GF4 Ti4800 SE 8X on MSI 845 Ultra?

    Hi folks,
    I just purchased a GF4 Ti4800 SE 128mb 8X.
    I own a MSI 845 Ultra ARU (6398), I understand this board only supports up to 4X AGP, but the GF4 card should be able to "downgrade" to work with a 4x motherboard, I hope.
    Booting up is ok, but graphics start to tear on the window start-up screen. At the desktop, once i click the mouse, the desktop will hang like for 1 sec, then the monitor switch to Black screen, and then back desktop, this repeats when i click the mouse. There are also some weird colors here and there.
    Can anyone pls advise?

    Quote
    Originally posted by wonkanoby
    serious vga card,is your psu in the same bracket
    Hi there, thanks for ur prompt reply :D
    hmm, sorry i don't realli what you mean by "psu in the same bracket"?
    My PSU is a HEC 475W.

  • P4 Northwood 533FSB on an MSI 845 Ultra ARU

    Just got a simple question here.  Have not been able to find an answer anywhere, so thought I would ask.  Does the MSI 845 Ultra-ARU support the P4 Socket 478 533 FSB proc?  I was running a 478 1.6 @ 2.1 on it, and wanted to get the pops a 2.4 to run on it, so he would not have to overclock.  Game him the board, and Alpha, vid., and memory, and wanted to polish it off with this proc to get him off of the old 700 Athlon (just isn't right  to keep yo dad @ 700 when you have 2 @ 2.1  :D ).
    TIA for the input.
    Darrell

    Doesn't support 533mhz FSB cpus. Only 400 but up to 2.6ghz. You can get your Pops a 2.4ghz 400mhz fsb cpu.
    http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=34%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6398

  • MSI 645 Ultra-C vs MSI 845 Ultra-C

    Can somebody tell me widh mobo from this 2 is better.
    For the moment I use MSI 845 Ultra-C but I'm not satisfy by it.
    Its recommend to change it with MSI 645 Ultra-C (MSI 645 Ultra) or not?
    Thanks.

    I don't think that MSI 845 Ultra-C its a good mobo, I had problems with it from the 1st day I have it. I change it once. I don't know what to say I don't see some performances from my P4, and I think the mobo its the problem here. Or maybe its because I have just an GForce 2 MX400 and 128 DDRAM?
    Now I just install WIN .NET Webserver Edition and it seems to work fine, but with WIN XP Pro its not working at all. Maybe you give some advices because I really don't know what to do.
    Another ideea that cross my mind it was to chenge it with MSI K7N420 PRO + Athlon XP 1600+. Is this a better ideea?
    Thanks

  • Help with motherboard MSI 845 Ultra-C

    Hello, I have a problem with this motherboard:
    When I connect something in the PCi slot, Windows recognize there are something there, but i can´t install it because it can't recognize the drivers. I tried to change the slot, I have installed the last drivers of the motherboard and there is no way to use the PCIs slot. All the things I have tried, works perfectly in another computer, i have the original drivers and they have work time ago. If anyone can help i'll very very pleased. Thank you!
    edit: I have made a clear CMOS and it doesn't work
    Forgive muy English, but i`m spanish.
    In Spanish:
    Buenas tengo un problema con mis puertos PCIs de una placa MSI 845 Ultra-C.
    Cuando conecto algo a un puerto PCI (en concreto una tarjeta avermedia con sus drivers de casa, una tarjeta de red Realtek con sus drivers y otra tarjeta de red conceptronic c100i probadas en otros ordenadores y va perfecto) windows me dice q se a detectado un dispositivo pero nunca puede llegar a localizarlos, y ya creo q no es de los drivers. Sabeis de que puede ser?
    Ya he probado a quitarlo y ponerlo en todos los puertos cada cosa por separado, han funcionado en este pc alguna vez tambien y ahora no van. Muchas gracias por su ayuda
    Edito: Tambien he actualizado la placa base con los ultimos drivers q existian

    Quote from: Frankenputer on 25-January-08, 06:34:20
    Would you please post what is in your system, including the Power Supply (manufacturer, multiple +12V rails or single +12v rail, and the amps on the +12V rail(s)). Please include the full specifications of your system(including the operating system).  Look at my signature below to get some idea of what we'd like to know.
    INTEL Pentium 4   1.6Ghz
    256 MG DDR ram KINGSTON, 1 SLOT
    motherboard MSI 845 Ultra-C  VER:1
    power supply: HipoMedia, model:ATX-250PCC12,
    AC INPUT: 115VAC 7A 60Hz     230 VAC 4A 50 Hz
    DC OUTPUT:  +12V  13A   250W MAX
                       -12V  0.5A  250W MAX
    NVIDIA GEFORCE MX400 VGA BIOS
    HD: SEAGATE 40GB 7000rpp
    DVD- LG 4120B
    network card: conceptronic c100i
    Avermedia AVerTV 103
    windows XP Proffesional: including all sp2 updates.
    I have already tried with windows XP Home Edition, windows 2000 Proffesional and Windows 98 Second Edition.
    This is the information i know, if you need more, the audio is from the motherboard. Thank you again!

  • MSI 845 Ultra-C and Western Digital WD1600BB

    Hi!
    I've got a problem with a MSI 845 Ultra-C based computer.
    It worked before but there were problems with it's HDD and I wanted to install a new and bought a Western Digital WD1600BB. I connected the IDE drives like this:
    IDE1: Western Digital WD1600BB (Master)
    IDE2: Samsung Combo drive (Master) and the Other 80GB HDD (Slave)
    The problem is that it doesn't detect the combo drive. When I push the button on it tha tray opens and everything looks nice except the bios. Before that the 80GB HDD and the combo worked well.
    What should I do ? I would like to know if this motherboard can handle 160GB HDDs.
    By the way this is my neighbours PC so please answer quickly if you can.
    THX

    http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6566/hd.pdf
    120 gb was biggest they tested so 137 may well be largest

  • MSI 845 Ultra C with sound card???

    I recently bought a P4 2 Ghz with MSI 845 Ultra C, Geforce 4 Ti4200 128.
    A few weeks later i bought a simple sound card with surround support. Now when i try to install this software (Xp compatible) i get the error that the sound card is not installed and that the data is incorrect. I use the latest drivers from the internet. I believe this problem had to do with the onboard sound card of the motherboard. Is there anyway i can disable that???

    it is an XP bug, you might try windows update to see if MS fixed it.
    Here is for example ATI's doumentation of the error.
    I assume the bug won't be fixed by the update, so in that case you need to reinstall XP with the card already insalled in the slot.

  • MSI 845 Ultra-ARU cannot boot up!!!

    i had bought the board for a year.. everything works well... but recently, whenever i on the pc, the D-Led wii show #1, #2, #4 all red, #3 green.... then i flip through the manual book. there stated that it is "initializing keyboard controller"... what does that means???  it there going do to with the bios or the keyboard, or the MB????('?(')
    P4 1.5 GHz
    MSI 845 Ultra-ARU
    Kingston 256 MB PC2100
    IBM 40GB HD
    Elsa Gladiac 511
    Logitech Keyboard & Mouse

    Pull out the power cable from the wall (AC 220/110v)
    Move the clear CMOS jumper to position 2-3 for a few seconds, then back to position 1-2 and plug the power back.
    It's explaind in the manual.

  • Msi 845 Ultra C, Ddram Pc333

    My P4 2.4GHz on MSI 845 ULTRA C has DDRAM with 333 MGHz.  The FSB is set to 133 MGHz. However the multiplier is set to 18, and locked in BIOS setup. I want to set FSB from 133 to 166.5 without overclocking the CPU to enable the memmory overcklocking from 266 to 333. How to do it? Or is there another possibility to use 333MGhz with the memmory to utilise its speed?

    Presuming I understood your comment  I should rise FSB to maximum. This could mean the CPU overclock from 2.4GHz up to app. 2.8GHz. Isn't it too dangerous just for speeding up the memmory?
    PS: my mobo is 845-c ultra not i845d
    PS2: [QUOTE:you are actually overclocking your Memory-
       DOES this mean I oveclock the memmory not the CPU? Please explain
    Thanks
    Quote
    Originally posted by Vojtech
    If your CPU has locked Multiplier there is no other way to change DDRAM frequency as overclocking. However, if you are using 533MHz CPU on i845D without official support of 533MHz, you are actually overclocking your Memory. Default detting of i845D is 400MHz FSB/266MHz DDRAM clock. If FSB overclcoked to 533MHz, your memory will work on 33% more, so on 333 MHz

  • MSI 845 Ultra - Fasttrack Error in w2k Events

    Hello!
    I have a little prob with my MSI 845 Ultra under Windows 2000 Advanced Server.
    I installed W2K without problems, service packed, patched it, etc...
    But I alway see an error in the System Event Log :
    "The device, \Device\Scsi\Fasttrak1, did not respond
    within the timeout period. "
    That's a bit annoying  :(
    Does anyone already seen that ? What can I do to resolve that ?
    Thank you in advance !

    Hi,
    since this board is an Intel board, this topic is moved to Intel forum.

  • MSI 845 Ultra: USB20 not detected in WinXP

    Hello,
    Recently I bought a computer based on a MSI 845 Ultra board (USB2.0 + RAID) I'm using WinXP Prof. als desktop O.S. Everytinh seems to work fine but the USB2.0 controller is not detected. Is there in the bios some thing that I should enable ? Do I need somekind of extra driver so that it can be discovered. The USB1.1 controllers are working fine; no problems! :P
    Who can help me ?
    Extra Info
    MSI 845 Ultra (USB2.0 + RAID; MS6398
    BIOS version 3.6
    Windows XP Prof + SP1

    Hi,
    USB 2.0 is supported through external NEC chip.
    This infos I found on MSI web.
    NEC USB 2.0 Driver  
    Support model  K7T266 Pro2-RU (MS-6380 Ver2.0), 845 Ultra-ARU (MS-6398)  
    Description  
    Add General ID: VEN_1033&DEV_00E0
    -- Driver version: 2.0.3300.20300.
    For K7T266 Pro2, this driver must be used together with BIOS Ver3.3 or after.
    Note: For WinXP, please use Microsoft Windows Update to download driver from Microsoft or aquire the latest service pack
    WinXP SP1 Download Website :
    http://www.microsoft.com/windowsxp/pro/downloads/servicepacks/sp1/sp1lang.asp  
    Date  2003-4-28

  • MSI 845 Ultra - Ram probs

    I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board.  ?(

    Quote
    Originally posted by Bass_Player69
    I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board.  ?(
    Check yr manual page 2-6 for full details ....
    Intel Chipset i845D/E/G/GL ...etc can ONLY 4 DDR Memory bank.

  • MSI 845 Ultra support for PATA/133 HD

    I have an MIS 845 Ultra-AR (S478) mainboard with 1X80GB HD attached and the 2 ATA/133 Raid slots that I don't use. I also have a Maxtor SATA/150 PCI Card installed with a SATA/133 drive (100 GB) attached and running. I'm wondering what is the best approach, if any, to attach a Maxtor PATA/133 (300GB) drive (6L300R0). Can it attach to the onboard IDE or is it possible to attach to the SATA card. Attaching to the IDE so far, on AUTO, the BIOS recognizes the drive as 33.8 GB. Maxblast 4 will also only partition 33.8 GB. Attached to the SATA card on the Ultra ATA port ir recognizes the drive but again Maxstor 4 will only partition 33.8 GB.
    AMIBIOS was released 11/26/2001  A6398MS  V3.0. CPU is Pentium P4 1.6GHZ.
    I've been in computing for many years ... this is just getting a bit deeper that I've had to go before. I hope to learn from it as well.
    Any help would be greately appreciated.

    Make sure you are not using a NCQ based drive as ICH4 doesn't support.
    Next, you'll have to install the RAID Controllers for the IDE Controller to work.
    You can also get a SATA to PATA convertor if you want to use the SATA PCI Card.

  • C5001 Chip on MSI 845 ULTRA Ver:1 Board

    I messedup and burned a component om my motherboard its located near the CPU and the name on it is C5001.
    Does anyone know where to get it ?
    Mail me if you would like to see a picture of it
    Regards Henrik, Sweden :P
    [email protected]

    Thank You!
    I checked the BIOS and it IS a retail board (BIOS V 3.11.00.8).
    I should be fine using the USB BIOS flash tool right? Also, my thumb drive is a Sansa Cruiser. It's FAT 32, but It also has the U3 software on it. Can I leave that on there, or should I remove it?

  • MSI 845 Ultra no CD-ROM or CD-RW data read?

    Hi, my problem is that my CD-ROM drive AND my CD-RW drive both can't read some types of data.
    The data types i've tryed were bin files and mpeg's (vcd's) and i persume some more because my drives realy are having a hard time on reading data on any CD.
    I think it's some kind of conflict with Win XP, because it worked perfectly on Win 98 SE.
    Does anybody also had this problem or hopefully a solution?
    My CD-ROM Drive is a Mitsumi 54x.
    And my CD-RW is a Philips CDRW 800 series.
    Thanx, Fytos.

    When you say that they can't read some kinds of data, what exactly do you mean?  What are you using to try to "read" them?  This doesn't sound like a motherboard issue.
    Make sure you have DMA enabled on the devices under Device Manager/IDE ATA Controllers/Primary (and Secondary)/Advanced Settings.

Maybe you are looking for