Msi 845PE max2 bluetooth problem

i have a msi 845PE max2 BFIR, intel 2,4/533 , 512 DDR 2700 and im running w2k pro.
on the other system i also have w2k pro running.
my problem i have bought an extra msi bluetooth usb key so i could connect wireless to my p4 system.
after installing the software (ver:1.2.2.15) i can do : receive business cards,make a serial port connection do file transfers.
the problem that i have is making a network access connection.
when i try it i get a dail-in screen, i enter admin + password , the bluetooth is then telling me
"bezig met het registreren van deze computer in het netwerk"
(busy with registration of this computer in the network)
after a couple of seconds there is an error.
(busy with checking of the networkprotocolconnection)
"TCP/IP heeft fout 718 gerapporteerd : er is een time-out opgetreden van de verbinding tijdens het wachten op een geldig antwoord van de externe computer"
(TCP/IP has reported error 718 : there has been a time-out for the connection during the waiting on a approved answer of the external computer)
does anybody know how i can fix this ?
thanks in forward
Pascal Pielage

Hi,
You're using the "Network access" service of the desktop box I guess? That gives you access to the Bluetooth LAN adapter being installed with the Widcomm software. If you want to make some connections out you have to configure Internet connection sharing on the desktop box as well - and ofcourse make sure that the two devices are correctly paired with sufficient permissions in the security config. I have been running about the same setup on a slightly older 845E Max2-BLR MB using XP with virtually zero issues...
WernerJ

Similar Messages

MSI 845PE Max2 RAM Problems

I have some problems with putting in the 2nd RAM stick.
I m running on a
P4 2,4 GHz
1x 256MB DDR333 RAM pc2700 (from nanya or whatever)
BIOS 1.2 AMI
When i put the 2nd RAM stick in, (also 1x256 MB DDR 333 RAM pc2700 but from Twinmos) it boots up but shuts down in 3 seconds, and sometimes it just boots up but the screen stays undetected.
I have tried a Dane-Elec (256 MB DDR 333 RAM pc2700) and the problem kept occuring.
I have tried several slot combinations and the Twinmos ram stick doesnt work ny itself (?...so didnt the Dane Elec stick)
What could be my problem?
Thanks in advance for the help,
Ron

If you have a module that won't work by itself, I would (suspect) a bad module. May not be seated all the way?
Another thing with this board.....Slot one supports two banks and slots two and three share two banks.

MSI 845PE Max2 (MS-6580 v2.0) Help Please!

OK... I'm confused ?(
Well... I got the MSI 845PE Max2 - L (MS-6580 v2.0) on
order. Now I'm reading that alot of peeps having so
many problems with it! 8o
I just read a reply from Assaf saying that the board was SUED?
First off, what does this mean?
Should I return this board when it arrives or keep it?
Also, Im a little unclear of the difference between the
845PE Max2 (MS-6704) & the 845PE Max2 (MS-6580 v2.0)
Why are there 2 Different models that both say 845PE Max2?
NOTE:
I plan on using my Crucial DDR 333 (2 x 256MB) & a PIV 2.40 (533MHz FSB).
My other Specs are below.....
Any help will be appreciated.
I rather not even open the box if this board has MAJOR problems.[/color]

Uhmm i think you are mixing boards
There is no such board (at least not yet) as a 845pe-max2 version 2.0 there is a 845pe-max version 2. There is some difference between the max and the max2 board. The max version only has room for two dimms, no bluetooth/raid and gigabit support. So you are talking about two completely different boards but with very similar names I'm not a motherboard expert but i have tried the max2 version (6704) and i wasn't completely satisfied, cpu temp is way off, bios upgrade caused wierd problems, when using my adaptec 2940uw controller raid bios disappers. I think this is a result of the companies releasing their products to soon, as far as i can tell (and i have been reading a bit ) all 845pe based motherboards have their problems. When you ask what to buy everyone is saying asus p4pe, i for one think that asus is overpriced and i really don't wanna waste money on a serial ata solution which has no future. Their onboard audio isn't suported by freebsd. I have not decided quite yet, i was actually rather satisfied with my msi 845pe max2, it has a lot of nice features and i like msi liveupdate, the board runs perfectly with other os's than windows, but i will see some response from msi regarding those problems there is,
and currently i'm awating to see if msi will release a bios that perhaps will fix those problems i (and alot others) had with this board.
Regards
Maynard

WinXP and MSI 845PE MAX2

Got the following problem.
I've just purchased an MSI 845PE MAX2 (MS-6704) with a PIV 2,4ghz 533 processor and 512mb DDR PC2700.
Onboard USB/FIREWIRE/LAN and ATA133raid are enabled. My graphics card is a Matrox G400 which is using IRQ10.
I have 3 HDD's installed together with 1 DVD-ROM and 1 3,5" diskdrive.
I have WinXP proffesional installed without any servicepack.
When I boot my system, everythings goes fine. I see the XP bootscreen and so. After the bootscreen, the pc normally goes to the sign-in screen. Well not for me.
After the bootscreen my monitor goes black, not standby just black and the system doesn't do anything.
Booting in save mode is no problem.
I have also disabled all the onboard stuff and booted the system with only my graphicscard in it. There is no IRQ that is used twice.
Can somebody help me?
thx

Yeah, strange isn't?!
I've installed the RAID drivers during installation (HIT F6 if you want to install a third party driver)
Finished installation, restarted the pc and it gave this problem.
So for short:
Builded a new pc.
Everything worked.
Installed WinXP on a new HDD (80gb WD)
Made 1 partition of 8gb NTFS, the rest is unallocated.
Installed WinXP without any service packs
XP installed the drivers for:
USB/FIREWIRE/LAN/RAID/SOUND and also for some PCIcards: SCSIcard without bios, SB Live.
I had also a Pinnacle TVcard placed in the system but XP doesn't have any drivers included for it.
After finishing installation, rebooted.
XP wouldn't start.
Removed all pci cards.
same problem
disabled USB/FIREWIRE/LAN/SOUND
still the same problem.
Maybe a driver problem of a pci card which I removed but still is 'installed' in XP?

MSI 845PE MAX2 FSB 800???

I've got the MSI 845pe max2, and have been trying to find out if it's possible to get FSB 800 of this board like the MSI 845PE MAX3?

Hi,
You're using the "Network access" service of the desktop box I guess? That gives you access to the Bluetooth LAN adapter being installed with the Widcomm software. If you want to make some connections out you have to configure Internet connection sharing on the desktop box as well - and ofcourse make sure that the two devices are correctly paired with sufficient permissions in the security config. I have been running about the same setup on a slightly older 845E Max2-BLR MB using XP with virtually zero issues...
WernerJ

MSI 845E Max2 - Wierd Problems....

Hi
Recently, i made a "little" upgrade in my computer and i decided to buy this:
MSI 845E Max2 MS-6566E
512MB DDR 266
P4 2,4 MHz 400
ATI Radeon 9700 Pro128 64
HDD 40GB Seagate Barracuda 7200
DVD 16/40 Panasonic
... and a cheap SB LIve 5.1 ( not enought money :D )
Well.. my nightmare begins when i started put all together except ATI, cause it will arrive at next friday, so, i put my old Riva TNT64 32..
Result... nothing!
No boot, signal or else.
I thought was graphic card and i put an older ATI All in wonder pro pci .. nothing again..
I contact my dealer and he replaced my msi by an Asus P4S333 ;( until the new msi come and replace again ).
This problem was a msi defected board or maybe an anoying conflict?
Will be my new ATI radeon 9700 pro accepted by MSI 845E Max2 MS-6566E?
I really need help ?(
Best regards
Korgh

Korgh
whilst i understand your frustration but this is a user to user support forum and the only people you will get dirrect answers from in here are other users who have both your board and the 9700 video card,they appear to be thin on the ground at the momment
i do hope you saved some of your money for a descent psu as that will be a power hungry system you have their
you could try here see if any test revues were done with the 9700,the boards i know have problems are 400 via chipsets and early 9700 pcb models below 1.3link

Problems with my msi 845pe max2 bfir

right 2 problems first which is quiet annoying,
one of the reasons i bought the bfir model over the others was because of the bluetooth now i go to set it up install programs etc and shut down pc get bluetooth card go to put it in and..... um where does it conect to i look in the manual and it says use usb lead to connect it to blue usb bort on motherboard or somethink along thouse lines fine i think i will just get the lead and um ??? where is the lead read the supplied installation booklet and cable is optional !!!!!!!!!!!!!!! how the f*** can msi say that the board comes with bluetooth when u cant use it unless u have the cable that is just silly, where am i sposed to gget the cable from ???? please help.
on to second problem
overclocking
now my cpu is a p4 2.4b 533 and my ram is some OCZ PC 3500 512mb now i set the fsb to 166x18 and that gives me 2987mhz fine u say, and i set the memory to 333 but the memmory is seriously lagging its running at 165mhz but on a friends abit motherboard cant remember the model number with the same settings im running the memory fsb is well over 250fsb, ive been told this is cos my memory isnt running in async and on the abit board to sort this they have a feature called hardware strapping why doesnt the msi board run the same they are bothe the same chipsets, would the latest bios cure this ????
if so why didnt msi just do it that way in the first place ???????
MaLicE
please help me answer my questions

yes i have the blue extra box but to actually connect the bluetooth card to the motherboard but if you were to look at yours the way u connect the blutooth card to the motherboard requires a cable which has the same connectors on as the extra usb ports you get i need a cable with 1 of them connectors on each end cos the bluetooth card plugs in to 1 of the spare usb slots on the motherboard.
as for overclocking i want the best out of my system i dont want to settle for standard the option msi have left out is a big option and i need to know why or if it is there where is it and if not is it in the new bios ???
MaLicE

MSI GP70 2PE Bluetooth Problem

Hi, i own a MSI GP70 2PE Lepoard and i'm experiencing problems with the bluetooth function.
it's not listed under PC and Devices, nor do i get a bluetooth icon down on the taskbar. Bluetooth is turned on via SCM.
Any help is appreciated

Try to update the latest SCM of your GP70 2PE and do the EC reset by removing the battery and the AC adapter.
If you can't enable the Bluetooth in SCM control panel, share the information of your WLAN adapter.
Which WLAN adapter you have and the Bluetooth driver version you have?
Also tell the OS and SCM version.
Does the WLAN function have the same problem as well?

MSI CX61 0NF | Bluetooth Problem | SCM Related

Hi. I bought this laptop recently, used good. I am very satisfied except for the issue I'm having. I have reinstalled everything from scratch, downloaded all the driver it needs. I had WiFi glitch with the old driver on the download section of the MSI site, but with the driver from Intel, it works now properly. This laptop is running Windows 8.1 Enterprise 6.3.9600 Build 9600 (updates automatically).
BIOS Version/Date      American Megatrends Inc. E16GBIMS.406, 10/10/2012
SMBIOS Version         2.7
Embedded Controller Version   255.255
The bluetooth (Intel Centrino Wireless Bluetooth 4.0 + High Speed Adapter
with BT_3.1.1311_e164 Driver) won't turn ON when the SCM 10.013.06287 is installed (10.212.11060 has .Net Framework problem). It keeps it turned OFF for split second. Without SCM install, it works but the ECO Tech (Fn-F5)m webcam (Fn-F6) and laptop monitor switch won't work.
I have seen solution like EC Reset (https://forum-en.msi.com/index.php?topic=112416.0) but it didn't work, reflashing EC Firmware and BIOS are something I need to know if that's the problem...
Any solution to this?

Which WLAN adapter do you have?
Try to install the SCM version 10.013.03016:
http://download.msi.com/uti_exe/nb/SCM_w8_10_013_03016.zip
If you have WLAN adapter, Intel® Centrino® Wireless-N 135 and Intel® Centrino® Wireless-N 2230, try to install the driver version 3.1.1309_8164:
http://download.msi.com/nb_drivers/bt/bluetooth_intel_3.1.1309_8164.zip

MSI H87i and bluetooth problem

Hello. I just bought this motherboard. I am using Windows 7 64bit version and I have downloaded and installed all drivers and updates via Live update. Everything works ok but no Bluetooth. In device list there is no bluetooth device. When try to install bluetooth drivers from motherboard drivers dvd (which came with the mobo), there is grayed option "install bluetooth". Is this Wireless-N 2230 broken? Wifi works normally. When I tried to install bluetooth drivers manually, installer finished it ok but still no bluetooth device!

Hi,
You're using the "Network access" service of the desktop box I guess? That gives you access to the Bluetooth LAN adapter being installed with the Widcomm software. If you want to make some connections out you have to configure Internet connection sharing on the desktop box as well - and ofcourse make sure that the two devices are correctly paired with sufficient permissions in the security config. I have been running about the same setup on a slightly older 845E Max2-BLR MB using XP with virtually zero issues...
WernerJ

MSI 845PE MAX2-FIR...6 USB Ports?

Okay, so I recently installed my MSI mobo. everything went exceptionally well. No major issues at all...except...
Well, here goes...
The manual states that this motherboard has 6 USB 2.0 compatability...2 Rear, and 4 Front.
Okay, obviously the 2 rear ones are integrated, but where are the pins for the 4 front USB ports?
I have a Lian Li aluminum case. It has 4 USB ports accessable on the front of the case.
Inside the case, coming from the front ports, there are a total of 16 wires, all single pin connectors, (4 per port). I can't seem to find where to connect these to on the mobo, so I can use my front ports.
Any help would be appreciated.
Fres

According the the manual the board has 4 rear and 2 front ports.
There are 2 rear ports under the PS/2 ports and another 2 above the audio ports.
The 2 front ports are connected to JUSB1 (page 2-27 of the manual).

MSI 845PE (ver2) Codec problem

Need help on the following problem:
On my system I can play (media player) DivX with MP3 sound (stereo), but no AC3 sound.
I have registered the AC3 sound codecs (iviaudio.ax & mpegaudio.ax, but the media player crashes. With no codecs everything OK but no sound on AC3.
Seems to be a Realtek ALC650 cip non-compatibility.
In all other cases/apps sound OK.
I run Win2k SP3 on:
MS6580
512MB (DDR333)
PIV 2.53GHz/533
Leadtek A280 MyVIVO GForce4 128MB
Anyone can help, please?

http://home.hccnet.nl/h.edskes/mirror.htm#kazaa
Try the K-lite codec pack. I know it solved lot's of problems for me.

MSI 845E Max2-BLR problems

There seems to be a problem with this board and USB 2.0. It seems that a USB controller shares an IRQ with my VGA (GF4Ti4400). Playing any video files in Windows Media Player would cause a crash once the USB 2.0 drivers are installed.
I've updated the BIOS and used the USB 2.0 drivers available from LiveUpdate(since there was no alternative way of getting them). After a fresh format and reinstall of windowsXP the problem would still persist. I've disabled DirectDraw to prevent the crashes but is there any way to fix this without disabling DirectDraw Acceleration?

hi
do you use usb2?
i have an abit nforce board with raid
i have a simple choice usb 2 or fast write speeds with the raid so usb2 is of,its the only via driver on the board
see if normal usb still works and disable it if you dont use it

LITE Bios Promise MSI 845PE MAX2 FIR

Can any one tell me where I can find an update for the promise lite bios to the normal bios.
I have 4 harddisks attached and I can only create 1 raid array.
I would like to create a second on but the lite bios doesn't allow this.
Thanks

cartoen - no, that's not correct. You can create as many arrays as you wish.
The trick is, attach your drives one at a time. This allows the lite BIOS to define each drive as a separate array.
Or you can create 2 arrays of course, or 3 - just add the drives in the order you want.
So - for a 2 drive array, add 2 drives at the same time. Raid BIOS combines the two as a single array.
For single drive arrays, add one drive at a time, then switch off and add new drive(s). (This is what I do)

Driver\'s problems with 845PE Max2

Hello to everyone...
I am a fan of MSI's boards and recently i bought an MSI 845PE max2 m/b.
I have a problem with a device. In Windows Xp Prof wih service pack 1, a device called ''SM BUS Controller" cannot be installed and I can't find any driver that fix this problem. I tried to reinstall windows and to unplug any extra devices (such as usb devices, printers etc) but nothing happens.
Last but not least, when I try to install the INTEL chipset drivers that MSI provides us from the site, the PC reboots at 15% of the installation procedure and windows crash getting a message ''the file pci32.sys is missing or it is corrupt''.
Furthermore i have no complaints about my board. It is stable as a rock and has everything i need...
Thank you, and forgive me about my english... 8)

You need to install the Intel INF driver which is in de MSI download area )

Msi 845PE max2 bluetooth problem

Similar Messages

Maybe you are looking for