MSI 848P-Neo - Mobo don't start at all

Hi,
I have a MSI 848P-Neo mobo with a P4 Ht 3.0 Ghz on it. New PSU 360W Enermax (12V 26A, 5V 32A, 3.3V 32A). No HDD or CD Drive are plugged. No card in PCI slot, except VGA in AGP Slot. 1 RAM stick in slot.
When I power on the system, the D-Bracket with Diag led light as follow:
1 and 3 are red
2 and 4 are green
I check in manual for signification but this case isn't in the manual.
I don't hear beep from speaker.
Can you confirm me that is the mobo the problem ?

Have you Clear CMOS Guide yet with power cord removed from the PSU 1st?

Similar Messages

MSI 848P neo-V

my love:
MSI 848P NEO-V
CPU celeron 2,4Gh bus 533
Ram 512Mb
HDD seagate sata 80Gb
AGP Asus V9400 X
today, i make a ghost file with nortonghost ver 7.0, there's strange. Ghost speed just about 100Mb/Min ( same specification with ASROCK is 400Mb/min) . I don't know why, i think it maybe come from Cmos setting. Mod and ACE please help me.thanks in advance

thank you, i've just enable it, i will check later, there is another problem, i just bough a CDRW, i install into my computer, but my computer doesn't analize, it looks like nothing install,my computer only analize my old CD, if i take out my old CD then my computer "see" my new CDRW and i use normally. Please help me, i need to use both CDs.thanks
note: i set master for my old CD and slave for new CDRW.
one more thing, onchip controller ATA(s) have two selections, one is lagacy mode,one is native mode, please explain what different between them??

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Use the Adobe Cleaner Tool:
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Problems with MSI P31 Neo mobo

Hello all,
I just received my new MSI P31 Neo motherboard today and have spent nearly the whole day trying to get it to work.
My problem is that when you turn the system on about 4/5 times there is no graphics displayed what so ever. When the graphics do come on and you can go through the BIOS it quite often jams. If occasionally you do get past that, when the Windows XP disc starts to load the files for the installer, it Jams and you need to restart, restarting this long process.
My CPU is supposed to be supported, it's a 3.6ghz Intel Pentium 4 chip. I am using 4 x Samsung Original 1024MB DDR2 PC5300 RAM though it only shows 2gb of it in the BIOS. The graphics card is a NVIDIA GeForce 7300 GT 512MB PCI-E.
Can anyone tell me how to get this mobo to work? Things to try? Otherwise I think I will just have to send it back...
techie5487

Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb

MSI 848P Neo Series MS-6788 Model

Hi,
I'm new to building PCs and I have just built a P4 2.8GHz 800FSB Machine with an 848P Neo Series motherboard.
I have a few issues:
I cannot use a PS2 mouse it simply will not work.
With my PS2 keyboard, turning on num lock or caps lock causes the PC to lock up.
Is there some sort setting in the BIOS I need to change or is the board faulty?
Another issue I had which has now magically fixed itself - when I turned the pc on, I had to turn num lock on and then off to get the monitor to come off standby and to get the pc to start booting - any ideas?
Could you please help with with these problems as I don't have long to return the motherboard if it is faulty.
Thanks in advance

Hi Maggioni,
Look on side on PSU.....somewhere the will be the different "Rails".... list 12V,3.3V,5V, in AMPS. IE- 12V+ = 20A etc.
Hmmm, as for Keyboard.....is it a standard 105 or 102? Maybe, it is an enhanced with extra keys? Wireless or Corded. (If wireless....try changing the batteries)
Also try changing keyboard....borrow or buy a budget one.
Del

MOVED: HELP!!! K9N Neo-F don´t starts(wrong Bios)

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=104615.0

Quote from: nascarbr on 18-January-07, 21:35:13
Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?
"Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F."
why you did that? re-update BIOS with correct version for your board:
http://download.msi.com.tw/support/bos_exe/mbd_bios/7260v15.zip

HELP!!! K9N Neo-F don´t starts(wrong Bios)

Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?

Quote from: nascarbr on 18-January-07, 21:35:13
Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F. It recorded correctly, the MoBo starts, enters in the Bios with all the options of the Ultra, but when I leave and it normally has to read the HD or floppy, he stops. Don´t freeze, just tries to make the verification of some component of the Ultra that the Neo-F does not have. What I can make, since I do not have as to rewrite the certain Bios, since it stops before reading the floppy?
If I disable the correct option in Bios, it will work?
"Yesterday I recorded the Bios of another version (Ultra), in my K9N Neo-F."
why you did that? re-update BIOS with correct version for your board:
http://download.msi.com.tw/support/bos_exe/mbd_bios/7260v15.zip

[SOLVED]MSI P31 Neo -mobo and strange network problems

I can't get network to work properly with this MSI-mobo's integrated lan chip.
When I boot from Arch install cd r8169-module is loaded and I can get ip via dhcp. Strange thing is that I can access http but not ftp. When I change transfermode to passive from links ftp works. But during Arch install setup I can't access the repos.
When I boot to Arch after install network doesn't work at all. Only thing I get is resolv-errors when I try to use wget or pacman. R8169 module is loaded at boot and Ifconfig shows that I have ip assigned to eth0.
I also tried with 3com's 3c509 network card that I had laying around and I have exactly same network problems with it as I have with r8169.
I am really going out of my mind with this. I have a laptop with via's network chip and I've never had any network problems with it and Arch. I haven't changed anything in my routers setup and I just tried and the networking on my laptop works just fine.
I also tried Ubuntu Hardy on this desktop machine and networking works ok. Ubuntu also loads the r8169 module as Arch does.
Last edited by Aakko (2008-05-18 21:18:29)

Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb

"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

Do Jeantech PSU's work good with MSI K8N Neo mobo

topic

Assume you mean this JNP-500-AP
Bit on the light side @18A on 12v but you may get away with it. see How much power does MSI Neo2 Plat need? There's no difference in PSU requirements between Neo & Neo2 worth a damn.

MSI GTX970 - many games don't start "game.exe has stopped working"

Hey guys,
I have a problem with my new MSI GTX970. I have several games that just won't work.
Working games:
Witcher 2
Guild Wars 2
Project CARS in DX9 Mode
Not working games:
Project CARS in DX11 Mode
Battlefield 4
Assetto Corsa
Thief
Even dxdiag "stopped working" when testing the Direct3D Stuff
Most likely I think this is some driver issue but I have no idea how to resolve it? My "old" R9 290X was running without any problems. I did 2 clean installs of Windows 8.1 but it didn't help.
I'm running the latest nvidia driver of course but I'm a bit lost now - do you have any idea what the problem could be?
Thanks
Dan

Hey,
Sorry - did not read that before :-/
This is my system:
Main Board: Gigabyte GA-Z97M-D3H
Bios Version: F5
Video Card: MSI GeForce GTX 970 Gaming 4G
PSU: be quiet! Straight Power E9-CM
12v rail Rating of listed PSU: V1 18A V2 18A V3 20A V4 20A
CPU: Intel Xeon E3-1231
Memory: 4x8GB Crucial DIMM DDR3
SSD/ HDD: Samsung 840 Evo 500GB
CPU COOLER: Mugen 2 Rev B
Sound Card: Focusrite Scarlett 8i6
Any Additional hardware plugged into your system: Nope
OC: (Yes / No) No
Operating System: Win 8.1 64 Bit running the latest updates via MS Update
I also tested the card in my GFs system which has the same issues - it's nearly the same spec though, except that it has a Z87-GD65 Mainboard and only 16GB of RAM.

[845 Series] mb msi 848p neo-v problems with sound card

Since I've bought my new MB, I'm experiancing some problems with my sound card. WinAmp and MusicMatch Jukebox ( any version) does not support 5.1 sound system, but playing in stereo system. The soundcard AC97 is OK, cause Winows Media Player is working properly.Does anyone had such problem and solved it?
I must say that I've already used MSI MB, and all APPs worked properly with the same sound card. The difference is that my ex MB was based on old Intel processors, but not Presscot based as this one.

Have you installed the latest driver to
the Realtec soundchip(ALC 655)?

MSI 848P Neo-V (MSI MS-6788)

Hi,
Sorry for bringing a question about kind of prehistoric motherboard, but it still do the job for me (for now).
I have upgraded my hard disk to a 500Gb Samsung (SAMSUNG HD501LJ), which SATA II. I knew very well that my motherboard does not support SATA II and only SATA I.
However, as I wanted to check the HDD, I noticed using HWINFO32 that the HDD details about transfer mode are as follow:
Ultra-DMA Mode: Total: 7 (SATA), Active: 5 (ATA-100)
So of I understand well, although capable of running in SATA I, the disk is still running in ultra-DMA 5 (=ATA 100), correct?
I have tried various BIOS setting according to the manual:
Native Mode:
ATA Configuration: PATA+SATA
S-ATA Keep Enabled: Yes
P-ATA Keep Enabled: Yes
PATA Channel Selection: Both
P0-1st/P1-2nd or P0-3rd/P1-4th (does not change anything)
I have also tried:
Native mode
SATA Only
P-ATA Keep Enabled: Yes
PATA Channel Selection: Both
Combined Mode Operation: SATA First.
S-ATA Ports Definition: P0-1st/P1-2nd
Results are still the same.
So few questions:
1/ Am I missing something?
2/ Do I need to set jumpers on the MB or on the disk?
3/ Do I need to install specific Intel SATA driver (either during Windows install or after)?
4/ Is the BIOS configuration correct?
Thank you in advance for your help.
Cheers,
Rv
PS: I am running Windows XP SP2.

Performance of S-ATA l and Ultra-DMA 100 P-ATA are just about the same so I wouldn't waste any time worrying about it. I compared 2 HDD's I have a few years ago, Maxtor 60 GB Ultra DMA 100 P-ATA and Maxtor 80 GB S-ATA l and performance was exactly the same for both of them.

Expanding Mainboard Memory..MSI 848P Neo-V

I want to know what I need to do if I want to expand the memory on my motherboard. It says it has a 2gig max using non-ECC but can be expanded up to 3.2 gigs. How do I go about doing that?
Or can anyone point me to some websites that explain this process, what types of things I might need to do it, that sort of thing.
Thanks

how big is the memory you have now first of all?

MSI 848P Neo-V boot problem

Hi!
Boot problem still persists. First I thought it was due to the lack of CPU microcode support (tried to use Celeron D 325, I didn't get confirmation for this support from anywhere, a bit disputed thing). Now tried with a 2GHz northwood Celeron with no success. All parts are unused. Maybe my memories (2 x TWINMOS DDR-400MHz 256MB with m-tech chips) are not compatible with the motherboard.
Just came to my mind, does P4 systems require a heatsink for a POST operation, mean is there some sensors which make the CPU to refuse to work if no cooler is attached to mainboard? I tried to make things work traditionally without heatsink for a quick lookup...
-Thanks,
netnode

I did not understand. Is heat sink mandatory? At least P3 and earlier did not require heatsink. Once a boxed P2 (buil-in fan) required to attach the fan cord to the mainboard to boot up, so I also did this.

MSI 848P-Neo - Mobo don't start at all

Similar Messages

Maybe you are looking for