Msi 865 PE Neo2-ls w/ samsung ddr400 ram

Okay i have a msi 865pe neo2-ls board and since the day i got it if i try and run in anything but super slow heh slow for bios setting which also seems to clock my 400 ram down to 333, the system freezes fails to post etc.. So I flashed from 1.3 to 1.52b and its running as it always has except it found some ide controllers In xp now but the issue is now this, why whenever my ram is clocked to 400 does the board crap out? I have tried 2.6 volt 2.8 volt for ddr voltage But no matter what i do no go I am Using 4x 512 samsung ddr400 for a total of 2 gigs ram Any Suggestions? Going Insane,
Mori

http://www.madshrimps.com/?action=webnewsshow&id=1768
Here's a little byte . . .
And even with its memory divider idiosyncrasies, it's currently the best out there. Regardless, it's becoming crazy-making to re-set the BIOS by literally having to "pull the plug", remove affected (or infected) memory, and re-set the BIOS by replacing newer DDR with older DDR memory (I've been using a 256MB stick of OCZ GolD3700, I'll explain why this works). It's been quite a long time since I recall being so frustrated with PC-hardware. This article details the anomalies I've experienced among three motherboards, and several of the latest memory's designed for the Canterwood/Springdale chipsets . . .

Similar Messages

MSI 865 PE Neo2 – speed & performance

;( Could anyone help me to boost the configuration for the bios to work with speed & batter performance for the system & if I make some overclock what’s the Best setting I can do for my sys?.
Intel P4 @ 800 FSB / Vcore 1.50v ?(
865 PE Neo2 - bios : V1.3 X(
AGP Matrox Parhelia 128 Mb / 4x - 1.50V
DDR 2 X 512 Trancend 400 Mhz / 2.5.3.3.6.8burst by SPD/ 2.50v / Dual Channel
DRAM Frequency 400
Maxtor 120 GB SATA HDD
Ibest 400W w/3 Fans cooler system
Win Xp Pro Sp1

Quote from: CorNeLL on 15-December-05, 11:46:03
did you try to boot without the keyboard??? unplugged the keyboard and turn on your pc and see whats happens, maybe the ps/2 connector or the usb port whatever port you were using is toasted. try booting without the keyboard.
Yes I tryed without ke keyboard and with another keyboard!!
Quote from: balewolf on 16-December-05, 01:39:41
sounds like a corupted bios i had one do that years ago was another brand tho eventualy i got monitor output and it kept having some bios error had to rma it.
But I didn't make any bios update!
Quote from: Maesus on 16-December-05, 07:17:27
Tried Clear CMOS.
What is yoru power supply? IS it cery old alreday?
My power supply ia a termaltake 480W is not too old but I think is work well!!
Can it be memory???
I will try another time the all thing!!!
Thank's for the help!!

865-PE Neo2 P -- BIOS 48 LBA mode

Hi, I am having some problems with a Maxtor ata-160G drive, with the MSI 865-PE Neo2 P board. I read the maxtor lists, and based on their recommendations used the maxblast3 software to create 3 partitions.. however when I load Windows XP Pro, it doesn't recognize the partitions. Worse, even after loading XP SP1 and running the maxtor big_drive_enabler.exe, Windows thinks it's a 148G drive rather than the 160 G it is. I was told that the BIOS might need tweaking if it doesn't properly support 48-bit LBA mode .. question is, does anyone know whether the bios shipped w/ this board supports it, and how do I go about enabling it?
Thanks.

if that bit was not working it would see it as sub 137 gb
thats about right any way
as drive makers use a metric gb
not a proper on
and you loose by the format as well
http://members.cox.net/bwm.tech/sizes.jpg

Msi 865 neo2 series - only green or blue light work constantly

msi 865 neo2 series - only green or blue light work constantly or no light at all on the NB MSI's light fan....
and the pc stucks in different places
what does it mean ?

Hi, we simply need more info from you on your system to narrow down the problems. Please simply post your full system specs and full PSU specs for us.
All the Best... :D!!!

MSI 865 Neo2 taken back? True or False?

Well frds, I've just got a news that MSI has stop their distributors to sell any MSI 865 Neo 2 mobos for a period due to some problems that cause conflicts for the mobo... May I know if this is true as I will be getting one soon... The features is so cool and advanced!
Please let me know of any outcome... Thanx !!!
All the Best... :D!!!

Sorry for that... I didn't see FIS2R... as I'm reading too briskly... My mistake, sorry again...
By the way, I would like to buy I865 FIS2R, but I think that this board will not be out in Singapore yet as they are pushing the I875 FIS2R currently, and these board are not cheap here... around $450 Singapore dollars or more... whereas I've got me NEO2 I865PE non-FIS2R for only $260 Sin dollars... Big difference...
Thanks to all again for a million times for your helping hands...
All the Best... :D!!!

MSI 865 PE neo 2 S compatibilty

Dear Guys,
Please kindly help me to solve my problem with my old system.
I have an old system that I want to use as HTPC. The specs are:
-MSI 865 PE NEO 2 S
-1 Gb of RAM
-P4 2,66 Ghz Northwood with Hyper threading function enable.
-320 GB of HDD.
-HD 3650 AGP
-FSP Bluestorm II 500 watt
-Main board Bios v 2.5
The problem is, when I want to change the processor with P4 3,2 Ghz SL6WG (Northwood) 512kb / FSB 800. My system wont boot at all.
Based from:
http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=543
The P4 3,2 Ghz Northwood CPU listed as a compatible CPU for my mainboard.
I have tried clear the CMOS by shorting the 2 pins, remove the CMOS battery in the mainboard and still no results so far.
When I see the LED bracket it show 4 red light.
I have tested my system with P4 3.0 E Ghz (Prescott) SL7E4 and show no problems. My system run fine.
Am I got a bad CPU (bad P4 3,2 Ghz Northwood) or maybe this CPU not compatible with my mainboard?
Thanks a lot for the response.

Quote from: Stu on 19-November-09, 03:13:51
You mean when you press the power button, lights come on and fans start spinning, but there are no beeps and there is no display?
The CPU is compatible with that board, so if your system doesn't start with it in, then it must be a bad CPU.
Its definitely a SL6WG? (as shown on the CPU surface)
Yes the processor definitely SL6WG, I saw the code myself in the surface of the processor.
When I start my system with SL6WG installed, there are no beeps sound at all. However all the fan and my pc peripherals starting. My monitor only show the blank screen. with the led bracket in the back show 4 red light.
When I change back my processor to 2,66 Ghz Northwood or 3.0 E prescott my systems runs fine.
thx

Question about MSI 865 PE NEO3-v

could you help me , please
I ask about msi 865 PE neo3-v mainboard
does it support cpu type :Pentium D 820 (2.8GHz ,95w) (dual core)
and can I get the full performance of this cpu (dual core) on this mainboard without problems?
Because your site tell us that this mainboard is support cpu Pentium D 820 (2.8GHz ,95w) on this link
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=654&NAME=MS-7097&kind=1
pleas help me before I buy the cpu
1.Product Type: msi 865 pe neo 3- v
2.BIOS version: 1.xx (PCB 1.0)
3.External VGA Type: Nvidia GF fx 5500 128 AGP
4.CPU Type:Pentium D 820 (2.8GHz ,95w)
5.Memory Type:512 mb twinmos DDR1 PC 400
6.Power Supply Type:P4 lga 400 watt
7.Operating System:winxp pro sp2
8.Problem Description: does this mainboard support cpu type Pentium D 820 (2.8GHz ,95w) (dual core)
and can I get the full performance of this cpu (dual core) on this mainboard without problems?
thank you for helping

Look at this: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=654&kind=1
Quote
Pentium D (65nm, Presler, Dual Core, FSB800, L2 Cache 2x2MB)(B1 version)
Pentium D 920 (2.8GHz ,95w) 800 14 OK
Pentium D 930 (3.0GHz ,95w) 800 15 OK
Pentium D 940 (3.2GHz ,130w) 800 16 OK
Pentium D 950 (3.4GHz ,130w) 800 17 OK
Pentium D (64-bit, Smithfield, Dual Core, FSB800, L2 Cache 2x1MB)
Pentium D 820 (2.8GHz ,95w) 800 14 OK
Pentium D 830 (3.0GHz ,130w) 800 15 NO
Pentium D 840 (3.2GHz ,130w) 800 16 NO
Pentium D (64-bit, Smithfield, Dual Core, FSB533, L2 Cache 2x1MB)
Pentium D 805 (2.66GHz ,95w) 533 20 Under testing

MSI 865PE-LS Neo2 Help and Info

Hi
I bought a MSI 865PE-LS Neo2
the motherboard is running Intel 2.8 800mhzFSB cpu
I would like to know what would be the best /fastest memory to run on this motherboard
I need to know why the bios performance setting revert to slow wont run the fast,turbo or ultra turbo settings also no sign of PAT/DOT
I would like to know the current/best bios settings to run the memory/cpu Kingston KVR400X64C25/512
Intel P4 2.8ghz 800FSB
Kingston KVR400X64C25/512 512MB 400Mhz PC3200 DDR Non ECC DIM
Albatron 4800SE
WD 120gb
Audigy2

Hi guys
thanks all for the input
still require best config for this
I have just been email bios VS A6728IMS.161 not sure if I should try it ? ?
exact setup specs please
thanks
tony
IntelP4 2.8ghz 800mhzFSB
WinXP Pro - SR-1 + updates
MSI 865PE LS Neo2 Bios Vs 1.52
2x Kingston KVR400X64C25/512
Albatron Ti 4800SE 128
WD 120gb
Thermaltake Xaser3 (blue)case
420w PSU

MSI 865PE LS Neo2 and bios A6728IMS.162

I would like some info on
MSI 865PE LS Neo2 Bios Vs A6728IMS.162 I received by email
still require best config for this bios and motherboard
to run memory for 2 x KVR400X64C25/512 memory
I have just been email bios VS A6728IMS.162 not sure if I should try it ? ?
exact setup specs please
thanks
tony
IntelP4 2.8ghz 800mhzFSB
WinXP Pro - SR-1 + updates
MSI 865PE LS Neo2 Bios Vs 1.52
2x Kingston KVR400X64C25/512
Albatron Ti 4800SE 128
WD 120gb
Thermaltake Xaser3 (blue)case
420w PSU

Hi guys
thanks all for the input
still require best config for this
I have just been email bios VS A6728IMS.161 not sure if I should try it ? ?
exact setup specs please
thanks
tony
IntelP4 2.8ghz 800mhzFSB
WinXP Pro - SR-1 + updates
MSI 865PE LS Neo2 Bios Vs 1.52
2x Kingston KVR400X64C25/512
Albatron Ti 4800SE 128
WD 120gb
Thermaltake Xaser3 (blue)case
420w PSU

KM3M-V & DDR400 RAM

Hi!
I just bought a package which included the KM3M-V board and 512MB of PC3200 DDR400 RAM. Manual indicates it only takes highest spec of PC2700 DDR333.
Forgive a stupid question, but will the RAM work OK but the board won't take full advantage of the higher spec? Or would it damage the board if I installed it? Just need to know whether to return the memory and ask for PC2700 replacement.
Thanks, Dave.

Many thanks for the replies. Just needed to know that I wouldn't damage the motherboard.
Thanks again, Dave.

865 PE Neo2 LS Troubles

Alright, well first let me list my system specs:
865PE Neo2 LS
Intel Pentium 4 2.4c
Kingston HyperX DDR400 3200 RAM (2 256mb sticks, dual channel)
Western Digital 80 GB HD 8MB CACHE
Asus GeForce4 4200 128 MB 8x AGP
Sound Blaster Audigy 2 Platinum (with front bay control strip)
Running this in a RAIDMAX case with two side-fans, stock Intel cooler.
Basically my problem is no matter what, I have problems with this board. I stick my HD, all my other stuff into a friends Asus board and it all works fine, it's just on this Neo2. I can't TELL you how much grief this thing has given me. Maybe Toms Hardware should have done a more thorough review before tossing this board an award.
Either way, I've had problems from the get go. First off, when I installed Win 2000, I had a whole bunch of errors come up during near final install. So, I run the installer again, things work this time. Then, once in the system, I find out my computer now will just randomly reboot.
It doesn't matter if it's in idling, if I click to open something, whatever, it happens all the time, and messages vary (I finally switched to see errors instead of just auto-rebooting). So I figured screw this, maybe it's a 2k thing. It also gave me a HUGE amount of errors trying to install my Audigy 2 (from CDROM), but I don't even want to go there. I had to spend a LONG and hard time to even figure out how to get the install to work properly. So to make a very long and frustrating story short, I go out and buy myself a copy of XP pro...
XP pro seemed a bit more stable, until the same crap started happening. It's not as often, that's for sure, but it still happens. I just finished dealing with this problem today, to the point of where I guess some of the random reboots managed to screw up my registry, then I had to go in and fix that, but am still plagued with the same crap.
Random reboots, at odd intervals. Sometimes it'll go forever, allow me to sit and do whatever (it also seems to be more stable when I go and dink with my BIOS, though I have no clue WHAT exactly). Either way, I *still* have this problem. I've also checked to make sure I'm not running hot, and I'm usually around 38-40'C.
So, what I'm wondering is:
Are there a set of vcore settings, DRAM timing, AGP aperature size, etc., that I should be changing to best compliment and stabilize my setup?
Is there ANY advice people can give me to getting my system stable?
This also all happened before I ever popped in my Audigy 2, which actually installed ok under XP.
Any help would be GREATLY appreciated.

The same thing happened to me, to the point I had to install Windows ME.
You can change the "reboots" for a blue screen, not a solution, but you can see what the error is. It's an option in control panel/system, but I don't remember the exact name.
I searched the net for people with the same problem. I found that this seems to be an error that happens very often. All people with this random reboots, had 2 things in common (you and me too).
-Windows 2000 or XP
-A Nvidia card
As a matter of fact, I searched microsoft site for the error mentioned in one of this random blue screens and it's a recognized error, but there is still no solution to it.
Looks like we will have to wait for service pack 2, or another windows release.
I still have not found a solution.

Have MSI P35 Neo2-FR mobo, want 8GB RAM (4x2GB), anybody knows compatible ram?

I have MSI P35 Neo2-FR motherboard and want to buy 8GB ram, preferably 4x2GB(2x2GB + 2x2GB). Anybody has such a setup and can recomend some RAM?
I dont want to buy some random ram, because the motherboards are very picky when youn install the maximum supported ram.

Crucial tend to have quite compatible RAM across boards. On their site you can enter your motherboard model to find the RAM that is compatible. A gave it a run and the following is compatible:
Part #: CT2KIT25664AA667 • DDR2 PC2-5300 • CL=5 • Unbuffered • NON-ECC • DDR2-667 • 1.8V • 256Meg x 64
Part #: CT2KIT25664AA800 • DDR2 PC2-6400 • CL=6 • Unbuffered • NON-ECC • DDR2-800 • 1.8V • 256Meg x 64
Part #: CT2KIT25664AA1067 • DDR2 PC2-8500 • CL=7 • Unbuffered • NON-ECC • DDR2-1066 • 1.8V • 256Meg x 64
Part #: BL2KIT25664AA80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
Part #: BL2KIT25664AL80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
Part #: BL2KIT25664AR80A • DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.0V • 256Meg x 64
The above are all 4GB kits so obviously you'd need to buy two packs to get the 8GB.
http://www.crucial.com/uk/store/listparts.aspx?model=P35%20Neo2-FR/FIR
You do need a 64-bit OS to access the full 4GB or 8GB so also bear that in mind.

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

MSI Says all Neo2's have DOT,Look...

On this site in reference to Bios Settings they state the following:
"4. Captain: 3rd level of overclocking, also the default value of "Load High Performance Defaults"."
This means that all Neo2 boards have at least two DOT setting's being on/off right?
I suspect all Neo2 are made on the same assy line and DOT parameters can be enabled somehow either by software or an iron should fix this. Even my LS board made in June 2003.
Such an agressive feature in my mind would require the FISR to have a different Bios Flash... altough I am far from an expert at this and have no problem admitting this!
So c'mon MSI your Busted. Cough up the Mod.... we know its there. If your FISR had a SCSI chip instead of a Promise one it would have got my business at whatever cost.
In Humour
Patt P
Vancouver, B.C.
P.S. I don't think I would even use this feature if made available, its nice to know what your board is capable of though

MSI will soon enable DOT on the 875 with future BIOS rev. They are not trying to pull anything over on anyone, They said in their news post :At a future date we will implement DOT into other products.)

Neo2 4 dimms at DDR400?

Hi, i currently have 1 gig (512x2) of Corsair Value Select DDR400 2.5cas in my system. I've heard increasing to 2 gigs stops all that map loading and hitching that BF2 is notorious for when you first join a game, but i think i've also heard that the neo2 boards drop to DDR333 when running all 4 dimms at once. Anyone know what im talking about? I want to upgrade to 2 gigs (512x4) of the same corsair value select but not if it cant hold DDR400 speeds. Please help.

figure'd I'd throw another nickle in the ante here..The nvidia nforce 3 and 4 are both capable of utilizing all four dimms at dual channel, however, because the memory controller is IN the AMD cpu, therein lies the limitation. BUT, the winchester core can control previously mentioned RAM configuration, given that the system will default the speed of said RAM to 333mhz, if the AUTO option is selected in BIOS. One can change this by manually setting the speed to 400mhz in the BIOS, disabling the BIOS's ability to default to 333Mhz. Because of the limitations of the older cores however, this can only be acheived by selecting the 2T command rate setting in the BIOS. All of these setting are under the heading of Cell Menu-->DRAM configuration. What I don't know, because I do have said Winchester Core CPU, is whether or not the revision E core CPUs can utilize the 1T command rate. Another thing to note is the larger memory modules do not overclock as well as smaller ones, in most cases.

Msi 865 PE Neo2-ls w/ samsung ddr400 ram

Similar Messages

Maybe you are looking for